Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Supply and Configuration of Legacy Roby 1 CNC Machines

Active

State & Local

Response Deadline11/05/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the supply and configuration of three Legacy Roby 1 CNC Machines for prime contractors working on facility projects at Red Rocks Community College. The scope of work requires the provision of units equipped with integrated computers, the installation of Mach3 Motion Control and CAM Pro Turning Software, and full machine calibration. Additionally, the contractor must provide 208V Single Phase Power Supply components and ensure all equipment meets manufacturer-issued specifications for educational standards. The project is categorized under NAICS code 333911 and was posted on October 26, 2026, with a response deadline of November 5, 2026. The final deliverable consists of three fully calibrated and software-loaded CNC machines ready for use within the college's facilities.

General Info

Agency

Colorado → Red Rocks Community College

NAICS

333911 - Pump and Pumping Equipment Manufacturing

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of RRCC 27-04-DQ.

The full solicitation package (3 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

RRCC 27-04-DQ Computer-Numerically Controlled Machines

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 26

subcontract

Response DeadlineNov 5

Submission deadline

Response Deadline

11/05/2026, 07:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyColorado → Red Rocks Community College

ContactsNo contacts available

OfficeN/A

Organization / AgencyColorado → Red Rocks Community College

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies three Legacy Roby 1 CNC Machines for prime contractors on Red Rocks Community College facility projects. Provisions units with integrated computers, installs Mach3 Motion Control and CAM Pro Turning Software, and performs machine calibration. Includes 208V Single Phase Power Supply components. Must meet manufacturer-issued specifications for educational standards. Delivers three fully calibrated and software-loaded CNC machines.

Similar Contracts

Same NAICS industry code

Lime Slaking System Equipment SupplyThis subcontract for the Lime Slaking System Equipment Supply involves providing specialized mechanical equipment for water treatment plant projects managed by Hollywood Public Utilities in Florida. The scope of work requires the manufacture and delivery of lime slakers, slurry tanks, and associated pumps, all of which must be constructed using Type 316 stainless steel. In addition to the physical hardware, the supplier is responsible for delivering critical technical documentation, including dimensional drawings, shop drawings, and technical data sheets. The contractor must also provide factory test reports and anchor bolt calculations specifically designed to withstand seismic and wind loads. The response deadline for this opportunity is December 3, 2026.

Public Utilities

POSTED

about 10 hours ago

DEADLINE

in about 1 month

EMI Waveguide Ventilation SystemsThis subcontract involves the supply and integration of specialized EMI waveguide ventilation systems for prime contractors supporting Army Headquarters Department of Army G-3/5/7 projects. The scope of work includes providing low-noise intake and exhaust ventilation blowers and fabricating honeycomb waveguide vents specifically designed to block RF and electromagnetic wave propagation. The contractor is responsible for installing secure mounting flanges and power cabling, as well as ensuring RF attenuation verification for all ventilation ports. The project requires the delivery of two complete sets of exhaust ventilation assemblies. Managed under the Department of Defense through agency W6QK Acc-Apg, the contract falls under NAICS code 333911. Performance is centered in the 77416 area, with a brief response window ending on October 29, 2026.

POSTED

about 11 hours ago

DEADLINE

Valve Supply (NSN 2915-01-182-9935)This subcontract involves the manufacture or procurement of five units of a specific valve, identified by NSN 2915-01-182-9935, to support prime contractors delivering on DLA supply contracts. The work is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, with the place of performance located at Tinker AFB. The contractor must ensure full traceability to approved sources and conduct quality inspections in accordance with MIL-STD-1916 or ASQ H1331. Mandatory qualifications include SAE AS9003 or ISO 9001 certification and a completed CMMC Level 2 self-assessment. The response deadline for this requirement is November 2, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Globe Valve Supply (NSN 4820014473220)This subcontract involves the manufacture and supply of Globe Valves matching NSN 4820014473220 for prime contractors under Department of Defense DLA supply contracts. The technical specifications require the use of NEOFLON M400H material as a substitute for KEL-F and the application of KRYTOX 240AC for lubrication. It is explicitly stated that these components must not be designed for use with steam, hydraulic fluid, or seawater. The project is managed through the DDSP New Cumberland Facility and requires strict adherence to MIL-STD-2073-1E, MIL-STD-129, and RP001 packaging standards. All valves must be delivered completed, marked, and packaged on an FOB Origin basis. The response deadline for this opportunity is November 5, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Supply of Fluid Pressure Regulating Valve (NSN 4820016993722)This subcontract involves the procurement of one Fluid Pressure Regulating Valve meeting the exact specifications of NSN 4820016993722 for prime contractors on DLA/Navy projects. The Department of Defense, specifically DLA DIST SAN JOAQUIN, requires the part to be delivered to Tracy, California, by March 20, 2027. A critical restriction of this contract is that the valve must not be produced using additive manufacturing processes. Eligible providers must maintain an active CAGE code and registration in SAM.gov. The opportunity falls under NAICS code 333911, with a response deadline set for November 5, 2026.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

Fuel Metering and Distributing Pump SupplyThis subcontract involves the supply of 14 fuel metering and distributing pumps, identified by NSN 015537551, to support prime contractors delivering on DLA supply contracts. The scope of work requires the manufacturer or source to ensure all units comply with MIL-STD-129 marking standards and are palletized according to RP001 DLA Packaging Requirements. Additionally, the provider must supply Material Safety Data Sheets and hazard warning labels in accordance with 29 CFR 1910.1200. The contract is issued by the Department of Defense under the DLA Weapons Support Land Supplier Operations Vehicle Support agency, with performance taking place in New Cumberland, Pennsylvania. Operating under NAICS code 333911, the agreement focuses on the delivery of 14 fully palletized pumps. The solicitation was posted on October 25, 2026, with a response deadline of November 5, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

3000GPM Diesel Fire Pump and Controller SupplierThis subcontract agreement involves the supply and delivery of a 3000GPM diesel fire pump and a matching controller for prime contractors working on City of Chattanooga facility projects. To ensure full system compatibility, the supplier must provide a replacement unit that matches the manufacturer and size of the existing equipment. The contract is managed by the City of Chattanooga Business Unit in Tennessee under NAICS code 333911. Interested parties must submit their responses by the deadline of November 12, 2026, for this procurement which was posted on October 25, 2026.

City of Chattanooga Business Unit

POSTED

DEADLINE

Well Pump Installation ContractorThis subcontract opportunity is for a Well Pump Installation Contractor to support prime contractors on an Ontario Clean Water Agency project located at Mississippi Mills Well 7. The selected contractor will be responsible for the physical removal of existing pump assemblies and piping, conducting inspections of the well casing, and the subsequent installation and connection of new pump assemblies and discharge piping to ensure a fully operational system. The scope of work requires the use of specialized well-pulling equipment, including cranes and pump hoisting rigs. To qualify, contractors must hold a licensed well contractor designation and possess valid confined space certifications. Interested parties must submit their responses by November 9, 2026.

Ontario Clean Water Agency

POSTED

DEADLINE

Well Pump and Motor Equipment SupplierThis subcontract agreement involves the supply of heavy-duty submersible pump and motor assemblies for the Mississippi Mills Well 7 replacement project under the Ontario Clean Water Agency. The selected supplier is responsible for the manufacture and delivery of the equipment directly to the project site in Canada, ensuring all components meet CSA or equivalent electrical safety standards. As part of the deliverables, the supplier must provide comprehensive technical documentation, including manufacturer certifications, performance curves, and warranty information. Interested parties must submit their responses by November 9, 2026, to support the prime contractors overseeing this Government of Ontario infrastructure initiative.

Ontario Clean Water Agency

POSTED

DEADLINE

Pump & Equipment SupplyThis subcontract for Pump and Equipment Supply involves the procurement and delivery of three new industrial-grade sanitary sewer pumps and associated mechanical hardware for lift station projects at the University of California, Merced. The selected provider is responsible for ensuring all equipment meets specific University material standards and specifications, and must provide all necessary manufacturer certifications upon delivery to the project site in Merced, California. The opportunity was posted on October 23, 2026, with a response deadline of November 17, 2026. Falling under NAICS code 333911, this contract focuses on the supply of critical infrastructure components to support prime contractors working on the university's utility systems.

University of California, Merced

POSTED

DEADLINE

Pumps & Valve EquipmentThis subcontract for the Antelope Valley - East Kern Water Agency involves the supply and installation of high-capacity pumps and valves for prime contractors working on Project No: HDWB 26-02. The scope of work includes the installation of submersible deep well turbine pumps, line shaft pumps, and horizontal frame-mounted pumps, as well as butterfly, check, ball, and plug valves. The selected provider is responsible for delivering fully installed and tested pumping systems. The project is located in Palmdale, California, and falls under NAICS code 333911. Interested parties must submit their responses by the deadline of December 9, 2026.

Antelope Valley - East Kern Water Agency

POSTED

DEADLINE

in about 1 month

Iceberg Desalination Buoy SupplyThis subcontract involves the supply and delivery of the Iceberg desalination buoy system for prime contractors working on pilot projects for the City of Fort Bragg in California. The scope of work includes provisioning the Iceberg technology unit and integrating the necessary systems for water production and delivery, specifically ensuring the system can operate without the need for shore-based electricity for its pumps. The contractor is responsible for delivering a fully operational desalination buoy directly to the project site in Fort Bragg. Classified under NAICS code 333911, this agreement focuses on the deployment of specialized water desalination technology to support municipal pilot initiatives.

City of Fort Bragg

POSTED

DEADLINE

More opportunities from Colorado → Red Rocks Community College

Same awarding agency

Non-Working Medical Equipment Acquisition (Trade-In)This subcontract involves the acquisition of non-working medical equipment for prime contractors operating on facility projects at Red Rocks Community College. The scope of work specifically requires the removal and transport of one non-working Philips IU22 Ultrasound Machine, serial number B043V8. The selected provider must ensure full compliance with all applicable medical waste and electronic disposal regulations during the process. The primary deliverables for this agreement are the successful removal of the specified unit and the issuance of a trade-in credit. This procurement is categorized under NAICS code 423450 and was posted on October 26, 2026, with a response deadline of November 5, 2026.

Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 17 hours ago

DEADLINE

Ultrasound System Installation and Clinical TrainingThis subcontract for Red Rocks Community College involves the installation and clinical training for ultrasound systems on facility projects. The selected provider will be responsible for performing one-day onsite installations, offering onsite clinical support, and delivering both a Basic System Training Course and Level Two Offsite Tuition and Travel packages. The primary goal is to deliver fully functional installed systems and ensure users receive the necessary training certifications. To qualify for this engagement, the provider must utilize manufacturer-certified technicians and trainers. The project is categorized under NAICS code 811219, with a response deadline set for November 5, 2026. All work is performed in support of prime contractors managing the college's facility upgrades.

Other Electronic and Precision Equipment Repair and Maintenance

POSTED

about 17 hours ago

DEADLINE

Ultrasound System Software Upgrade and LicensingThis subcontract for Red Rocks Community College involves the provision and activation of specialized medical software for prime contractors working on facility projects. The scope of work specifically requires the installation of Release 14.0 software and the activation of Flow Viewer software for Philips proprietary ultrasound systems. To ensure full functionality, the contractor must provide manufacturer-authorized software licensing to deliver fully operational software installed on EPIQ systems. The opportunity is categorized under NAICS code 513210 and was posted on October 26, 2026. Interested parties must submit their responses by the deadline of November 5, 2026. Further details and submission processes are managed through the Colorado state procurement portal.

Software Publishers

POSTED

about 17 hours ago

DEADLINE

Philips EPIQ Ultrasound System and Hardware SupplierThis subcontract agreement establishes the supply of medical imaging hardware for prime contractors working on Red Rocks Community College facility projects. The scope of work includes the provision of one Philips EPIQ Elite G System equipped with an HDMAX 24 inch monitor, an Upgrade Kit B.4 HW for an existing Philips EPIQ 5, and an optional Flow Viewer 4D V9-2 Bundle. All hardware must be accompanied by manufacturer-issued specification sheets that adhere to established educational standards. The selected supplier is responsible for delivering the accepted ultrasound hardware to the Arvada Campus. This procurement is categorized under NAICS code 423450, with a response deadline set for November 5, 2026.

Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 17 hours ago

DEADLINE

Acquisition and Removal of Legacy Maverick Gen2 CNC RouterThis subcontract involves the acquisition and removal of a used Legacy Maverick Gen2 CNC Router from the Red Rocks Community College campus. The scope of work includes the complete removal of the router, a non-working vacuum table, a 3x5 work envelope, the Mach3 controller, and all associated workstations. The contractor is responsible for providing the necessary equipment removal tools and maintaining standard commercial insurance to facilitate the delivery of the trade-in machine from the facility. The project is managed by Red Rocks Community College in Colorado under NAICS code 423830. Interested parties must submit their responses by the deadline of November 5, 2026, at 7:00 PM.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 17 hours ago

DEADLINE

Shipping and Delivery of Industrial CNC EquipmentThis subcontract involves the transport and delivery of three industrial CNC machines to the Red Rocks Community College campus in Lakewood, Colorado. The selected contractor is responsible for the loading, hauling, and unloading of this heavy machinery using appropriate flatbed trucks and rigging equipment, such as cranes or forklifts, to ensure safe placement at the designated campus location. To be eligible, contractors must maintain commercial hauling insurance and be in good standing with the Colorado Secretary of State. This opportunity falls under NAICS code 484220, with a response deadline set for November 5, 2026.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 17 hours ago

DEADLINE

RRCC 27-05-DQ Diagnostic Ultrasound System

Solicitation # RRCC 27-05-DQ

Red Rocks Community College has issued solicitation RRCC 27-05-DQ for the procurement of modern ultrasound technology to support its DMS Program. The project involves the purchase of one Philips EPIQ Elite G System with HDMAX and associated software and hardware upgrades, as well as the potential trade-in of a non-working Philips IU22 Ultrasound Machine for an allowance of up to 10,000 dollars. The total budget for this procurement is 124,000 dollars, and all equipment and services must be fully functional by January 18, 2027, for the Spring 2027 class. The equipment is to be delivered to the RRCC Arvada Campus. The contract will be awarded to the responsible respondent providing the most advantageous quote, with price and cost serving as the primary evaluation factors, alongside lead time and sample quality. Interested vendors must submit a signed Vendor Response and Price Sheet, a current W9, and manufacturer-issued specification sheets via email to Lynn Beltran by November 5, 2026. The college maintains a strict no pre-payment policy. Compliance requirements include registration in the System for Award Management and adherence to various Colorado state statutes regarding ethics, conflict of interest, and anti-lobbying certifications for awards exceeding 100,000 dollars. The contract also incorporates several FAR clauses regarding termination for convenience across different contract types.

Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 17 hours ago

DEADLINE

RRCC 27-04-DQ Computer-Numerically Controlled Machines

Solicitation # RRCC 27-04-DQ

Red Rocks Community College is soliciting quotes under solicitation number RRCC 27-04-DQ for the procurement of three Legacy Roby 1 Computer-Numerically Controlled (CNC) Machines, each featuring an integrated computer and controller. The equipment is intended for the Fine Woodworking program to increase instructional capacity and student access to industry-relevant technology. All goods must be delivered to the Lakewood, Colorado campus by June 15, 2027, to comply with grant funding deadlines; failure to meet this date will result in order cancellation. The college also offers an optional trade-in of one Legacy Maverick Gen2 CNC Router for an allowance of up to $10,000.00. The contract will be awarded to the responsible respondent whose quote is most advantageous to the State, with price and cost serving as the primary evaluation factors, followed by sample quality and delivery lead times. Applicants must submit a completed Vendor Response and Price Sheet, a current W9, and a manufacturer-issued specification sheet via email. The college does not provide pre-payment, and the awarded vendor must provide proof of good standing with the Colorado Secretary of State and an insurance certificate before the purchase order is executed. The solicitation incorporates various federal provisions, including FAR clauses for termination for convenience and compliance with the Davis-Bacon Act and Equal Employment Opportunity standards where applicable.

Sawmill, Woodworking, and Paper Machinery Manufacturing

POSTED

about 17 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS