Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Supply and Delivery of 36-inch CO2 Laser Engraver System

Active

Federal

Response Deadline08/03/2026, 06:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the procurement, configuration, and timely delivery of a commercial-off-the-shelf 36-inch CO2 laser engraving system to Tyndall Air Force Base, with all deliverables due within 30 days of award. The system must fully comply with Unique Item Identification standards and adhere to all applicable shipping requirements to ensure proper tracking and receipt at the installation. This is a Service-Disabled Veteran-Owned Small Business Set Aside subcontract under NAICS code 333517, reserved exclusively for eligible small businesses owned by service-disabled veterans. The solicitation was posted on July 22, 2026, with responses due by August 3, 2026, and the performance location is specifically designated as Tyndall AFB, Florida, with a ZIP code of 32403. The contracting office is under the Department of Defense, identified as FA4819 325 Cons Pkp, and the award will be made to a qualified vendor meeting all technical, regulatory, and small business eligibility criteria.

General Info

Procure and deliver 36-inch CO2 laser system to Tyndall AFB within 30 days, compliant with UID and SDVOSB set-aside.

Agency

Department Of Defense → FA4819 325 Cons PkpView Agency

NAICS

333517 - Machine Tool ManufacturingView NAICS

Place of Performance

Tyndall AFB, FL, 32403, USA

Set-Aside

SDVOSBC

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 22

subcontract

Response DeadlineAug 3

Submission deadline

Response Deadline

08/03/2026, 06:30:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FA4819 325 Cons Pkp

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → FA4819 325 Cons Pkp

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Procurement, configuration, and delivery of a commercial-off-the-shelf 36-inch CO2 laser engraving system to Tyndall AFB within 30 days of award, including compliance with UII and shipping requirements.

Similar Contracts

Same NAICS industry code

Hydraulic Ironworker

W07V Endist St Louis

POSTED

about 22 hours ago

DEADLINE

Supply of Jewelers’ Lathe (NSN 3416008409717)The contract requires the procurement, packaging, marking, and delivery of three units of a Jewelers’ Lathe identified by NSN 3416008409717, with all work to be performed in full compliance with military packaging, labeling, and identification standards. Delivery is to be made under FOB origin terms, meaning the buyer assumes responsibility for the goods once they leave the seller’s facility. The equipment must meet all applicable military specifications for functionality, durability, and documentation to ensure compatibility within defense supply chains. The solicitation is issued as a subcontract under the NAICS code 333517, indicating the nature of the work falls within precision instrument and equipment manufacturing. The opportunity was posted on July 22, 2026, with responses due by August 3, 2026, and is managed by the DDSP NEW CUMBERLAND FACILITY under the Department of Defense. The place of performance is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002, indicating where the deliverables will be received or inspected. Although no point of contact or solicitation number is provided, the official link to the DIBBS platform is included for further details. The contract does not specify a set-aside designation, suggesting it is open to all eligible suppliers without preferential classification.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Hand-Operated Sheet Metal Brake Machine SupplyThe contract involves the supply of one hand-operated sheet metal brake machine with a 24-inch forming width, accompanied by two 3/4-inch tooling components, all of which must meet military specifications for marking, packaging, and preservation to ensure durability and traceability during handling and deployment. The equipment is intended for use by the Department of Defense, specifically under the agency designation SAN DIEGO, with performance required at the zip code 92136-3581. This is a subcontract opportunity with a North American Industry Classification System code of 333517, indicating classification within the industrial machinery manufacturing sector. The solicitation was posted on July 22, 2026, and responses must be submitted by August 3, 2026, with all deliveries expected to comply with rigorous defense standards for quality and documentation.

POSTED

DEADLINE

LATHE, JEWELER'SThe contract seeks three jeweler’s lathes with specific technical requirements, including a minimum 3.94-inch swing over the bed, a minimum 12-inch bed length, and a minimum 3.25-inch distance between centers. The spindle must be sealed and mounted with Magnus-style collet accommodation, and the tailstock must be plain push type with the same collet compatibility, supporting a maximum 3/16-inch Magnus collet capacity. The lathes must include additional equipment such as two 3-foot round belts, a 0-1/4 inch drill chuck with arbor, a three-jaw chuck with reversible jaws, a wheel chuck sized for 0.221 to 0.523 inches, a full Magnus-style collet set covering sizes 5 through 80, an eight-speed open headstock drive motor with a maximum 3,000 RPM, a three-slide rest with toolpost, a tool set featuring six square cutters, two round cutters, and one round toolholder, and a screw cutting attachment capable of producing both right and left-hand inch threads. This procurement is governed by DLA packaging, technical, and quality requirements referenced from the DLA Master List, with compliance determined by the revision in effect on the solicitation issue or award date, depending on acquisition type. Government identification must be removed from any non-accepted supplies. The NSN is 3416-00-840-9717, and delivery is due within 167 days after order. The solicitation number is SPE8E6-26-T-3789, issued on July 22, 2026, with responses due by August 3, 2026, under the NAICS code 333517, procured by the Department of Defense’s New Cumberland Facility, with Jennifer Roome as the primary point of contact.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

BRAKE MACHINE, SHEETThis contract specifies the procurement of one hand-operated sheet metal brake machine with a maximum capacity of 16-gauge mild steel and a forming width of 24 inches, equipped with a set of seven distinct bending fingers including two each of 3/4 inch, 1 inch, and 1-1/4 inch sizes, plus two 3 inch and two 6 inch fingers. The item is identified by NSN 3441-01-209-3402 and must comply fully with the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, with revisions controlled by the solicitation issue date. The brake machine must meet the technical specifications outlined in CID A-A-59484 Revision A, and no mercury or mercury-containing compounds may be intentionally introduced or come into direct contact with the product, except under strictly defined exceptions for specific functional uses such as batteries or instruments, with all mercury-containing portable lamps and devices requiring shockproof construction and secondary containment per NAVSEA 5100-003D. The item must be packaged in strict accordance with MIL-STD-2073-1E and marked following MIL-STD-129, including the special marking code 05 for delicate instruments, with cushioning applied to all sharp edges prior to packaging. Delivery is required FOB origin within 167 days of contract award, with no variance permitted in quantity, and inspection and acceptance will occur at the destination point. The sole delivery destination is DLA Distribution San Diego at 3581 Cummings Road, Building 3581, San Diego CA 92136-3581, and transportation must comply with applicable DLAD procedural notes C19 and C20. The contract is issued under solicitation SPE8E5-26-T-3654, posted on July 22, 2026, with responses due August 3, 2026, and the required delivery date is January 31, 2027. The item falls under NAICS code 333517 and is classified as a federal procurement, with Don Trachtman listed as the primary point of contact.

POSTED

DEADLINE

ENGRAVING MACHINE, PThe contract is for the procurement of one engraving machine, model Gravograph-New Hermes P/N 29-043-0TM and P/N V7200, under NSN 3417-01-466-0285, issued by the Defense Logistics Agency through solicitation SPE8E5-26-T-3668, with a total small business set-aside classification. Delivery is required within 20 days to FOB destination, specifically to USS ANCHORAGE LPD 23, FPO AP 96666, with zero tolerance for quantity variance. The machine must comply with DLA packaging requirements per RP001 and packaging standards MIL-STD-2073-1E, including specific methods for preservation, wrapping, and unit containment, with marking in accordance with MIL-STD-129 and no special marking code applied. Palletization must adhere to DLA packaging guidelines, and shipment must utilize the fastest traceable means, explicitly prohibiting parcel post. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the equipment, except for permitted functional uses in batteries, lighting, instruments, sensors, weapon systems, or NAVSEA-specified reagents, with portable items requiring shock-proof design and secondary containment per NAVSEA 5100-003D. The contract references technical and quality requirements from the DLA Master List, with compliance controlled by the revision in effect on the solicitation issue date. The purchase request number is 7017564905, with an original required delivery date of July 20, 2026, and the point of contact for the solicitation is Don Trachtman at the Defense Logistics Agency.

Defense Logistics Agency

POSTED

DEADLINE

CO2 Laser SystemThe 325th Contracting Squadron at Tyndall Air Force Base, Florida, is soliciting quotes for a single 36-inch CO2 Laser Engraver under solicitation FA481926Q0064, designated as a Service-Disabled Veteran-Owned Small Business Set Aside with North American Industry Classification System code 333517 and Product Service Code 3611. The system is critical for in-house fabrication and marking capabilities, and vendors must demonstrate full compliance with technical specifications outlined in the Salient Characteristics document, including Unique Item Identification (UII) requirements per MIL-STD-130, which mandates two-dimensional Data Matrix symbology compliant with ISO/IEC 16022 and encoding through ISO/IEC 15418 and 15434 standards. All items must be labeled and shipped in accordance with MIL-STD-129, and delivery is due no later than 30 calendar days after contract award to the specified destination at Tyndall AFB with FOB Destination terms, where government personnel will conduct final inspection and acceptance. The solicitation requires two separate submission volumes: Volume 1 for price and Volume 2 for technical approach, with the technical volume limited to seven pages in 12-point Times New Roman font, excluding cover and table of contents. Offerors must submit their quotes via email to Amn Juan Lopez Ramirez and SSgt Rebecca Cudjoe by August 3, 2026, at 1:30 PM CDT, and any questions must be submitted in writing by July 27, 2026, at the same time. Compliance with FAR and DFARS clauses is mandatory, including cybersecurity obligations under DFARS 252.204-7012, prohibitions on covered telecommunications equipment under DFARS 252.204-7018, and the use of Wide Area WorkFlow (WAWF) for all invoicing, receiving reports, and payment processing. The evaluation is based on a best value trade-off between price and technical capability, with no numerical weighting, where an Unacceptable rating in any technical sub-factor renders the entire offer ineligible. Price is evaluated based on Total Evaluated Price, with a 10% preference applied to HUBZone small business offers. Offerors must also complete required representations regarding size status, unique entity identifier, CAGE code, and

FA4819 325 Cons Pkp

POSTED

DEADLINE

MANUAL LATHEThe solicitation for a Manual Lathe under contract number SPMYM26Q7796 is a Total Small Business Set-Aside governed by FAR 19.5, restricting eligibility to small businesses as defined by 13 CFR Part 121. The procurement, managed by DLA Maritime – Puget Sound in Bremerton, WA, requires offers to be submitted via email to TRICIA.WINTERSTEEN@DLA.MIL no later than July 24, 2026, at 5:00 PM, with all bids must include a completed and signed solicitation, manufacturer details, country of origin, and FOB destination lead time. Any alternate items submitted must be accompanied by the manufacturer’s name, country of origin, and a technical specification sheet; submissions lacking this documentation will be disqualified. The contract mandates strict compliance with ASTM-D-3951 for packaging and preservation, prohibiting the use of asbestos, excelsior, loose fill polystyrene, and hygroscopic materials such as newspaper or shredded paper. All non-parcel shipments must be palletized using heat-treated wood certified by an ALSC-recognized agency, and each package must be clearly marked with the NSN, part number, noun nomenclature, quantity, unit of issue, contract number, and origin/destination addresses in accordance with ASTM-D-3951. Shipments must utilize DLA Vendor Shipment Module (VSM)-generated labels, and bar coding is required only if specified, conforming to MIL-STD-129 with ISO/IEC 15434 format indicators. The final delivery destination is NAVIMFAC PACNORWEST at 7000 Finback Circle, Silverdale, WA 98315, with FOB Destination terms applying per FAR 52.247-34. Inspection and acceptance occur at the destination, with final approval resting solely with the Government, who may reject any shipment based on a single nonconformance. The equipment must meet technical standards including OSHA 29 CFR Part 1910, ASME B30.26, ASME BTH-1, MIL-STD-2035A, and NFPA 70/79, with lifting points subjected to a 125% load test and magnetic particle testing per ASTM E709. Operational testing requires the lathe to function continuously for three

DLA Maritime - Puget Sound

POSTED

DEADLINE

in about 7 hours

34--LATHE,JEWELER'SThe U.S. Department of Defense, through DLA Troop Support, is seeking quotes for three jeweler’s lathes identified by NSN 3416008409717, to be delivered to W1A8 DLA Distribution within 167 days of award. The procurement is conducted under solicitation SPE8E6789, issued as a combined solicitation with no set-aside classification, and is open to all responsible sources that submit timely, electronic quotes. No hard copies of the solicitation are available; all documents including digitized drawings and military specifications must be accessed electronically through the provided SAM.gov link or via the DIBBS portal using the solicitation number. The NAICS code 333517 applies, indicating the commercial nature of the item. The point of contact for inquiries is listed as DibbsBSM@dla.mil, with guidance directing respondents to review the solicitation document in the Additional Information section or search the DIBBS website directly for full details. The response deadline is August 3, 2026, and offers must be submitted electronically to be considered.

DLA Troop Support

POSTED

DEADLINE

Steel Cutting for various sizes and typesThe Navy's Naval Surface Warfare Center Carderock Division is seeking to establish a three-year Blanket Purchase Agreement for specialized steel cutting services to support the Acoustic Research Detachments. The contract, solicited under NAICS code 333517 with solicitation number N0016726Q0013, requires vendors to provide cutting services for a wide variety of metals including hot and cold rolled strips, structural angles, rounds, square and rectangular tubing, pipe, carbon steel sheets, rebar, grating, aluminum alloys, stainless steel, and structural rolling components. All materials must be procured by the contractor, as no government-furnished materials are provided. The agreement will be awarded on a Lowest Price Technically Acceptable basis, where proposals must achieve an “ACCEPTABLE” rating for technical capability to be considered, and pricing must be as low as or lower than what the contractor charges its most favored customer. No shipping CLINs will be established; all transportation costs must be included in the unit price. Delivery is required to be made Monday through Friday between 0800 and 1400 local time at the Acoustic Research Detachment in Bayview, Idaho, or other approved locations, with FOB Destination terms applying. Compliance with military marking standards MIL-STD-130 and MIL-STD-129 is mandatory, requiring machine-readable unique item identifiers including enterprise identifier, serial number, and DoD recognized unique identification equivalents. All payments must be processed through Wide Area WorkFlow, and contractors may be paid via Government Purchase Card, requiring submission of an invoice and third-party payment form for each transaction without retaining any credit card information. Contractors must maintain active SAM registration, comply with cybersecurity requirements including NIST SP 800-171, safeguard covered defense information, and provide representations regarding prohibited telecommunications equipment and country of origin under Buy American provisions. The contract period runs from July 6, 2026, to July 5, 2029, with pricing determined per individual call order as needs arise.

POSTED

DEADLINE

Case ManufacturingThe contract titled Case Manufacturing under solicitation number HQ072726QCB04 is a combined solicitation set aside exclusively for Service-Disabled Veteran-Owned Small Businesses, aiming to procure manufacturing services related to case production for the Defense Microelectronics Activity, a division of the Department of Defense. The opportunity was posted on July 16, 2026, with a response deadline of July 31, 2026, at 9:00 PM Eastern Time, and is governed by NAICS code 333517, which pertains to other commercial and service industry machinery manufacturing. The primary place of performance is in Linda, California, with the official office address located in McClellan, California, 95652-2100. Clifton Bullock serves as the primary point of contact, reachable via phone at 916-940-4951 or by email at clifton.l.bullock6.civ@mail.mil, and is responsible for inquiries and coordination related to the solicitation. All responses must be submitted through the designated SAM.gov workspace link to be considered valid.

Defense Microelectronics Activity

POSTED

DEADLINE

Four (4) DN Solutions Horizonal Turning Centers (HTCs): QTY Two (2) PUMA Model # 3100Y and QTY TWO (2) PUMA Model # 3100LY

POSTED

DEADLINE

More opportunities from Department Of Defense → FA4819 325 Cons Pkp

Same awarding agency

Physical Security System MaintenanceThe 325th Contracting Squadron at Tyndall AFB is soliciting maintenance, service, and support for the OnGuard Lenel Access Control System located at Eglin AFB, Florida, serving the 53 Wing and 692nd Cyberspace Operations Squadron under a Total Small Business Set-Aside through NAICS code 561621. This procurement, designated as Solicitation FA481926Q0045, requests a firm fixed price contract for physical security system maintenance with a base year period of performance from August 1, 2026, through July 31, 2027, and five option years extending to February 29, 2032, including a six-month option for the final period. The scope requires comprehensive system support including quarterly preventative maintenance, supply and replacement of compatible components, and a software upgrade and support plan for the Lenel ACS, which must be maintained on at least five computer systems with battery backup functionality. Contractors must be a Value Authorized Reseller of Lenel products, provide a contract manager, ensure all personnel wear designated identification badges, are proficient in English, and comply with Air Force installation access requirements including obtaining base IDs and vehicle passes. Offerors must be registered in SAM and comply with numerous FAR and DFARS clauses including prohibitions on inverted corporations, safeguarding covered defense information, cybersecurity reporting, electronic invoicing via WAWF, and restrictions on acquiring covered telecommunications equipment. Technical proposals must be deemed acceptable to be eligible for award, with selection based on best value using price and technical capability factors. The initial response deadline was extended to July 27, 2026, at 7:00 PM Eastern Time, with the submission of SF 20 and a detailed technical proposal demonstrating compliance with the attached Statement of Work. Payment will be processed electronically using WAWF, and all work must be performed at the specified Eglin AFB location. The Government intends to award without discussions, requiring offerors to submit their best terms initially.

Security Systems Services (except Locksmiths)

POSTED

about 22 hours ago

DEADLINE

Operator Training and System OrientationThe contract titled Operator Training and System Orientation is a small business set-aside subcontract under the NAICS code 611430, specifically reserved for total small business participation as defined by the SBA. It requires the development and delivery of comprehensive training programs for government personnel focused on the safe operation, control systems, routine maintenance, and critical safety procedures associated with specialized equipment or systems. Training must be tailored to meet the operational needs of personnel stationed at Tyndall Air Force Base, Florida, which is the designated place of performance. The solicitation was posted on July 22, 2026, and responses are due by August 7, 2026, at 8:00 p.m. Eastern Time, with the contracting activity managed by the Department of Defense through the FA4819 325 Cons Pkp office. Participation is limited to certified small businesses and involves delivering structured, hands-on instruction to ensure compliance with safety standards and operational readiness.

Professional and Management Development Training

POSTED

DEADLINE

Environmental Compliance and Runoff ManagementThe contract seeks the design and implementation of stormwater runoff containment and treatment systems to ensure contaminated wastewater from wash operations does not enter the environment, with strict adherence to federal and Department of Defense environmental standards. The work is focused on mitigating pollution risks at Tyndall Air Force Base, requiring engineered solutions that capture, treat, and properly manage runoff generated by vehicle and equipment washing activities. Compliance with both environmental regulations and DoD operational requirements is mandatory, and the system must be durable, maintainable, and scalable to meet current and future operational demands. This is a total small business set-aside under NAICS code 541620, classified as a subcontract and open exclusively to small businesses as defined by the SBA. The opportunity was posted on July 22, 2026, with a response deadline of August 7, 2026, and is administered by the Department of Defense through the 325 Cons Pkp office. Performance is required at Tyndall AFB with a zip code of 32403, and all proposed solutions must align with applicable federal environmental laws and military infrastructure protocols. Contractors are expected to demonstrate technical expertise in environmental engineering, pollution prevention systems, and DoD compliance procedures to successfully deliver the project.

Environmental Consulting Services

POSTED

DEADLINE

Wash Rack System Installation and IntegrationThe contract involves the comprehensive installation of interior and exterior wash bays at Tyndall Air Force Base, requiring full site preparation, anchoring, utility connections, assembly, testing, and commissioning with seamless integration to existing base utilities. This includes all labor, materials, equipment, and technical expertise necessary to deliver a fully functional wash rack system that meets operational and safety standards. The work is classified under NAICS code 238290 for other heavy and civil engineering construction and is designated as a Total Small Business Set-Aside under FAR 19.5, exclusively available to small businesses. The solicitation was posted on July 22, 2026, with a firm response deadline of August 7, 2026, and is managed by the Department of Defense through the FA4819 325 Cons Pkp office. All activities must comply with federal and military installation requirements, and successful performance will ensure reliable, long-term wash bay operations integrated into the base’s infrastructure.

Other Building Equipment Contractors

POSTED

DEADLINE

Exterior Vehicle Wash Bay Supply and EquipmentThe contract calls for the supply of a complete exterior vehicle wash bay system designed specifically for large military vehicles, featuring a heavy-duty rack structure, high-pressure washing capabilities, comprehensive runoff containment to manage environmental compliance, and weather-resistant control systems suitable for outdoor deployment. The equipment must meet rigorous military standards for durability, safety, and operational reliability under demanding environmental conditions, ensuring effective and efficient cleaning of oversized defense vehicles without compromising infrastructure or surrounding areas. This is a Total Small Business Set-Aside subcontract under the North American Industry Classification System code 333999, open exclusively to small businesses as defined by the SBA, with a response deadline of August 7, 2026. The place of performance is Tyndall Air Force Base, Florida, and the awarding agency is the Department of Defense under the office designation FA4819 325 Cons Pkp. All equipment must be delivered and installed at the specified location, with full compliance expected for environmental, safety, and technical specifications governing military vehicle maintenance facilities.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

DEADLINE

Interior Vehicle Wash Bay Supply and EquipmentThe contract entails the supply of two complete interior vehicle wash bay systems designed to meet military standards, including all necessary components such as wash racks, pumps, nozzles, filtration systems, chemical dosing units, and control panels. These systems are intended for installation and operational use at Tyndall Air Force Base with a zip code of 32403, and they must comply with stringent performance and quality requirements typical of Department of Defense specifications. The procurement is structured as a subcontract under a Total Small Business Set-Aside, as defined by FAR 19.5, meaning only small businesses are eligible to bid, and the North American Industry Classification System code is 333314, which corresponds to other industrial machinery manufacturing. The solicitation was posted on July 22, 2026, with a deadline for responses set for August 7, 2026, at 8:00 p.m., and the contracting activity is managed by the FA4819 325 Cons Pkp office under the Department of Defense.

Optical Instrument and Lens Manufacturing

POSTED

DEADLINE

Supply of Street-Legal All-Terrain Utility Vehicles (UTVs)The contract seeks the procurement and delivery of three commercial-off-the-shelf, street-legal utility task vehicles (UTVs) to support logistics and transport operations at Tyndall Air Force Base. The vehicles must comply with federal safety standards and meet the specific operational requirements of the military installation, ensuring they are suitable for use on base roads and in mission-critical environments. All vehicles are to be新购, non-customized, and fully road-legal without requiring major modifications. This is a small business set-aside subcontract under the SBA program, meaning only small businesses are eligible to bid, and the North American Industry Classification System code 423120 applies to motor vehicle suppliers. The solicitation was posted on July 22, 2026, with responses due by 6:00 p.m. on July 27, 2026. The place of performance is clearly designated as Tyndall AFB, Florida, with a zip code of 32403. The contract is managed by the Department of Defense under the office FA4819 325 Cons Pkp, and all awarded vehicles must be delivered to and operational at this location.

Motor Vehicle Supplies and New Parts Merchant Wholesalers

POSTED

DEADLINE

Logistics and In-Transit Visibility (ITV) SupportThe contract requires comprehensive logistics support for the domestic shipping, packaging, labeling, and in-transit tracking of a laser engraver, with strict timelines to ensure delivery to Tyndall AFB within 30 days of award and mandatory WAWF receipt confirmation upon arrival. All activities must be executed to maintain full visibility throughout the supply chain, ensuring compliance with federal transportation and accountability standards. The effort is classified as a subcontract under a Service-Disabled Veteran-Owned Small Business Set Aside, aligning with the NAICS code 484121 for heavy and tractor-trailer truck transportation. Performance is specifically tied to the Tyndall AFB location with a zip code of 32403, and proposals must be submitted by the August 3, 2026 deadline. The contracting authority is the Department of Defense, through the FA4819 325 Cons Pkp office, and the procurement is intended to leverage the capabilities of qualified service-disabled veteran-owned small businesses to fulfill mission-critical logistics requirements.

General Freight Trucking, Long-Distance, Truckload

POSTED

DEADLINE

Cybersecurity Compliance and Reporting ServicesThis contract requires the implementation and ongoing maintenance of cybersecurity controls to ensure compliance with DFARS 252.204-7012, specifically focused on safeguarding covered defense information and fulfilling incident reporting obligations. The work is centered on establishing robust security measures that align with federal standards for protecting sensitive military data, including continuous monitoring, access controls, encryption, and timely notification of any cybersecurity incidents affecting covered systems or information. The contractor must demonstrate experience in executing these controls within a defense environment and maintaining compliance through documented processes and audit readiness. The contract is a subcontract under a Service-Disabled Veteran-Owned Small Business Set Aside designation, with the North American Industry Classification System code 541512 indicating it falls under computer systems design and related services. Performance is required at Tyndall Air Force Base with a zip code of 32403, and responses are due by August 3, 2026. This opportunity is exclusively available to eligible service-disabled veteran-owned small businesses and is managed under the Department of Defense, with the contracting office identified as FA4819 325 Cons Pkp. The contractor will be expected to support sustained security posture and regulatory adherence without interruption throughout the contract lifecycle.

Computer Systems Design Services

POSTED

DEADLINE

Technical Documentation and Compliance SupportThe contract requires the submission of comprehensive technical documentation and compliance support for a Department of Defense solicitation under the Service-Disabled Veteran-Owned Small Business Set Aside program, with a NAICS code of 541330 for professional, scientific, and technical services. The work entails developing a detailed technical approach, providing evidence of past performance, and ensuring full compliance with federal acquisition regulations including UII marking, WAWF system integration, and DFARS requirements. Performance is to be conducted at Tyndall Air Force Base with a deadline for response set for August 3, 2026, and the opportunity is structured as a subcontract award.

Engineering Services

POSTED

DEADLINE

Utility Terrain Vehicles (UTV) RequirementThe 325th Contracting Squadron is seeking information from potential vendors regarding the procurement of three 2026 John Deere 845R XUVs or equivalent utility terrain vehicles (UTVs) under a total small business set-aside. This sources sought notice is for market research and planning purposes only and does not constitute a commitment or solicitation for quotes. Interested contractors must demonstrate their ability to supply vehicles that meet the detailed salient characteristics provided in the attachments, with particular emphasis on the minimum towing capacity for any proposed equal product. Submissions must include company details, Unique Entity ID, CAGE code, GSA contract number if applicable, business size certification such as small business, 8(a), HUBZone, or other SBA designations, a capability statement, and full product specifications including make, model, and technical details. All responses are required to be emailed to SSgt. Sean Maguire by 1 PM CDT on July 28, 2026, and the effort falls under NAICS code 336999 with performance expected at Tyndall Air Force Base, Florida.

All Other Transportation Equipment Manufacturing

POSTED

DEADLINE