Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Supply and Delivery of Back-Up Generator for Gerber Wells

Active

Federal

Response Deadline08/07/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the supply and delivery of a commercial off-the-shelf backup generator specifically for Gerber Wells, with critical performance requirements including a minimum 20-hour continuous run time, integrated onboard fuel spill containment to ensure environmental safety, and remote start functionality for operational convenience and reliability. The generator must be ready for immediate installation and acceptance upon delivery, meeting all technical specifications without customization or modification beyond standard factory configurations. Performance standards are strict, and failure to meet any requirement may result in rejection of the unit. The opportunity is structured as a subcontract under the Department of the Interior’s Oregon State Office, with a NAICS code of 335312 indicating classification within generator manufacturing. The solicitation was posted on July 28, 2026, and responses are due by August 7, 2026, at 9:00 PM Eastern Time. The place of performance and precise delivery location are not detailed in the data provided, but the unit must be delivered to Gerber Wells site, with acceptance criteria tied to operational validation and compliance with all specified features. No set-aside preferences or small business designations are indicated, and the contract is open to qualified vendors meeting the technical and delivery requirements without restrictions.

General Info

Supply and deliver commercial backup generator to Gerber Wells with 20-hour runtime, spill containment, and remote start, ready for immediate installation.

Agency

Department Of The Interior → Oregon State OfficeView Agency

NAICS

335312 - Motor and Generator ManufacturingView NAICS

Place of Performance

OR

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 28

subcontract

Response DeadlineAug 7

Submission deadline

Response Deadline

08/07/2026, 09:00:00 PM UTCin 9 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of The Interior → Oregon State Office

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of The Interior → Oregon State Office

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply, deliver, and ensure acceptance of a commercial off-the-shelf back-up generator for Gerber Wells with 20+ hour run time, onboard fuel spill containment, and remote start capability.

Similar Contracts

Same NAICS industry code

MOTOR, ALTERNATING C

Solicitation # SPE7M9-26-T-0032

The contract specifies the procurement of 13 units of an alternating current motor with part number E6440M3 and NSN 6105-00-808-1587, under solicitation SPE7M9-26-T-0032, with a required delivery within 84 days of the award date. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersedes other standards such as ASTM D3951, and packaging must comply with MIL-STD-129 and DLA-specific packaging guidelines under RP001. The item is classified as a critical application item and must meet stringent verification standards, with sampling conducted per MIL-STD-1916 or ASQ H1331, Table 1, using zero non-conformances unless otherwise directed. Attributes are to be classified as critical, major, or minor with corresponding verification levels or AQLs, and unspeciﬁed attributes default to major. The contractor must adhere to cybersecurity compliance under CMMC Level 2 Self-Assessment and satisfy documentation requirements for source approval and test equipment calibration. Unit of issue is each (EA), with no quantity variance permitted, delivery is FOB origin, and inspection and acceptance occur at the destination. The delivery address is Hill Air Force Base, Utah, with a need ship date of November 3, 2026, and original required delivery by December 10, 2027. The contract includes no requirement for Item Unique Identification per DFARS 252.211-7003(c)(1)(i), and government identification must be removed from non-accepted supplies. All shipments must follow DLA transport procedures C19 and C20.

ELECTRICAL DEVICES DIV

POSTED

about 15 hours ago

DEADLINE

SYNCHRO, DIFFERENTIA

Solicitation # SPE7M1-26-T-238B

This contract pertains to the procurement of a SYNCHRO, DIFFERENTIAL component identified by NSN 5990-00-179-1871, with a quantity of 52 units at a unit price of $52.00, totaling $2,704. The item must be delivered FOB origin within 83 days of contract award, with inspection and acceptance occurring at the destination. Packaging and preservation must strictly adhere to MIL-STD-2073-1E and MIL-STD-129 standards, with no use of mercury or mercury compounds permitted in any stage of preservation, packaging, or marking. The component must be sourced from a QPL-approved manufacturer at the time of award, and the item is designated as a critical application part, requiring compliance with SAE AS20708/81B and SAE AS20708C technical specifications. The use of ozone-depleting substances is strictly prohibited without written contracting officer approval, and the item is subject to CMMC Level 2 cybersecurity self-assessment requirements. Covered defense information applies, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements. Full and open competition applies, with no set-aside. The delivery address is the DLA Distribution New Cumberland Facility, and the required delivery date is November 18, 2026, with a need ship date of February 3, 2026. The solicitation number is SPE7M1-26-T-238B, with a response deadline of August 10, 2026, and the North American Industry Classification System code is 335312.

MARITIME SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

MOTOR, ALTERNATING C

Solicitation # SPE7M1-26-T-237D

This contract pertains to the procurement of one unit of an Alternating Current Motor with NSN 6105-01-502-5614 under solicitation SPE7M1-26-T-237D, issued by the Department of Defense’s Maritime Supply Chain. The item is classified as a Critical Application Item, manufactured by Illinois Tool Works Inc. with part number 008359, and must be delivered within 20 days to the USS Dwight D Eisenhower CVN 69 at FPO AE 09532, with delivery terms FOB Origin. The quantity is strictly fixed at one unit with no variance allowed. All packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129 under DLA’s packaging requirements, utilizing specific preservation methods and container codes, and must be shipped via traceable means, explicitly prohibiting parcel post. Mercury and mercury-containing compounds are strictly prohibited from direct contact with the item, except for specified functional uses in batteries, lighting, instruments, sensors, weapon systems, and chemical reagents authorized by NAVSEA, with portable devices requiring shockproof construction and secondary containment per NAVSEA 5100-003D. The contract incorporates technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with compliance governed by the revision in effect on the solicitation issue date. The required delivery date is June 29, 2026, and inspection and acceptance occur at the destination. Shipping must follow DLAD Procurement Notes C19 and C20, and vendor shipment must use the assigned Traceability Control Number. The point of contact for the contract is Michael Reese, with contract data including NAICS code 335312 and official solicitation links for reference.

MARITIME SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

MOTOR, ALTERNATING CURR

Solicitation # SPE7M1-26-T-237R

This contract covers the procurement of a single alternating current motor, identified by NSN 6105-01-527-2390 and part number N563A1A0N060000 from POWERTEC INDUSTRIAL MOTORS, INC., with a total quantity of 57 units. The unit price is $57.00, resulting in a total contract value of $3,249. Delivery is required FOB origin within 218 days of contract award, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and the item is classified as critical application. The motor must comply with all DLA Master List of Technical and Quality Requirements, which supersede any conflicting specifications, including a strict prohibition on the use of Class I ozone-depleting chemicals, with any substitutions requiring prior approval. Packaging must adhere to ASTM D3951 as modified by DLA packaging requirements and MIL-STD-129 labeling standards, with palletization following RP001 guidelines. The item is subject to a total small business set-aside under NAICS code 335312, and all documentation and shipping instructions must reference the solicitation number SPE7M1-26-T-237R. The delivery destination is the DLA Distribution Depot Oklahoma at Tinker AFB, with the same address used for both freight shipping and parcel post. The original required delivery date is May 5, 2027, and transportation procedures must follow DLAD Proc Notes C19 and C20. The solicitation was posted on July 29, 2026, with responses due by August 10, 2026, and is managed by the Maritime Supply Chain under the Department of Defense. Points of contact include Caylee Frabott for inquiries, with additional details on unit of issue and purchase units available through the provided DLA resources. All contractual obligations are governed by the DLA technical and quality standards effective on the solicitation issue date, and compliance with these requirements is mandatory for award and acceptance.

MARITIME SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

CONTROLLER, ELECTRICAL

Solicitation # SPE7M1-26-Q-1307

The contract pertains to the procurement of a single unit of an electrical controller, identified by NSN 6110-01-662-6290, under solicitation SPE7M1-26-Q-1307. Delivery is required 261 days after the award date, with firm fixed pricing and zero variance allowed in quantity. The item must be shipped to the specified destination in Virginia Beach, Virginia, using traceable means only—parcel post is explicitly prohibited. Packaging must comply with MIL-STD-2073-1E, with specific methods for preservation, wrapping, and containment, and marking must adhere to MIL-STD-129 without any special identification codes. The controller is designated as a critical application item, and its supply is tied to the DLA Master List of Technical and Quality Requirements, which governs all technical and quality specifications referenced by R or I numbers. The contract strictly prohibits the use or incorporation of Class I ozone-depleting chemicals and the intentional addition of mercury or mercury-containing compounds, except for functional uses in batteries, fluorescent lights, instrumentation, weapon systems, or specific chemical reagents authorized by NAVSEA. Portable devices containing mercury must be shock-proof and feature a secondary containment barrier as mandated by NAVSEA 5100-003D. Any substitute chemicals require prior approval unless explicitly authorized by the governing specifications. The item’s requirement is linked to purchase request 7013945979, with a scheduled ship date of September 22, 2025, and the contract is issued under the Department of Defense’s Maritime Supply Chain, using the authorized DoD unit of issue. Government-specific codes and identifiers are included for internal tracking and logistics purposes.

MARITIME SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

Circuit Breaker SupplyThe contract calls for the supply of 118 circuit breakers that must be of a specified brand or an equivalent alternative, designed for seamless integration into existing electrical systems at the Stennis Space Center. The delivery terms are FOB destination, meaning the supplier is responsible for all transportation costs and risks until the items reach the specified location. The opportunity is structured as a subcontract under a Small Business Set Aside, exclusively available to small businesses as defined by the SBA, and is classified under NAICS code 335312, which pertains to the manufacturing of electrical lighting and wiring equipment. The solicitation was posted on July 29, 2026, with a firm deadline for responses on August 5, 2026, at 3:00 PM Eastern Time. The contracting entity is the NASA Shared Services Center, acting on behalf of the National Aeronautics and Space Administration, indicating this procurement supports federal aerospace infrastructure needs.

NASA Shared Services Center

POSTED

about 20 hours ago

DEADLINE

59--SYNCHRO,RECEIVER

Solicitation # SPE7M126T237S

The U.S. Department of Defense through DLA Land and Maritime is soliciting quotes for 50 units of the SYNCHRO, RECEIVER with NSN 5990009135159, to be delivered to W1A8 DLA DISTRIBUTION within 228 days after award. This procurement is conducted under solicitation number SPE7M126T237S, which is available exclusively online via the provided SAM.gov link; no hard copies are distributed. All qualified and responsible suppliers are invited to submit electronic quotes before the deadline of August 10, 2026, with no restrictions on set-aside status. The solicitation includes references to digitized military specifications and drawings that can be accessed or ordered electronically. The procurement falls under NAICS code 335312, indicating it relates to other electrical equipment and component manufacturing. Questions must be directed to the designated point of contact at DibbsBSM@dla.mil, with further details available through the Additional Information link or by searching the solicitation number on the DIBBS website. The office responsible for the procurement is located in Columbus, Ohio.

DLA Land And Maritime

POSTED

about 20 hours ago

DEADLINE

MOTOR,ALTERNATING C

Solicitation # N0010426QTB62

This contract solicitation, identified as N0010426QTB62, seeks repair services for the MOTOR, ALTERNATING C under a firm-fixed-price structure, with a required Repair Turnaround Time of 160 days measured from the physical receipt of the asset at the contractor’s facility as recorded in the Commercial Asset Visibility system. All repairs must comply with applicable military standards, including MIL-STD-130 Rev N for marking, and adhere strictly to the original manufacturer’s technical specifications and approved repair procedures. The contractor is responsible for all inspection and quality assurance activities, with records required to be maintained for 365 days after final delivery, and Government Source Inspection is mandatory. Freight is handled by the Navy under CAV protocols, and all deliveries are FOB Origin. The contract requires written acceptance prior to execution, and quotes must include unit and total pricing, RTAT, and a comparison to the new unit price and lead time. The solicitation mandates compliance with numerous federal and defense-specific clauses, including mandatory use of Workflow Pro, cybersecurity maturity certification requirements, and a Small Business Subcontracting Plan. Contractors must be authorized distributors of the original manufacturer, with proof of authorization submitted with their offer. The item is governed by specific CAGE codes and reference numbers, and any design, material, or part number changes require prior written approval from the NAVICP-MECH Contracting Officer, categorized under defined code systems. Packaging must follow MIL-STD-2073, and all technical documents provided by the Navy carry distribution restrictions governed by seven defined codes, with NOFORN and Official Use Only materials subject to strict access controls. The response deadline is August 28, 2026, and the contracting office is located in Mechanicsburg, PA, with primary point of contact Rebecca A. Rainey.

Navsup Weapon Systems Support Mech

POSTED

about 20 hours ago

DEADLINE

MTU Detroit Diesel Engines

Solicitation # N0040626Q0312

The Fleet Logistics Center Puget Sound is seeking quotations for MTU Detroit Diesel 3-71 and 4-71 engines to replace existing units in Navy vessels, where technical manuals and engineering drawings mandate exact matching components to avoid systemic damage. Only original equipment manufacturer solutions from Rolls Royce Solutions America, Inc. are acceptable to ensure compatibility and operational integrity. All qualified vendors may submit proposals, and evaluations will be conducted under RFO 12.203, weighing technical merit, delivery schedule, price, and past performance without prioritizing any single factor. The solicitation is open to all responsible sources with no set-aside restrictions, and the North American Industry Classification System code is 335312. Responses must be submitted by August 4, 2026, with an anticipated award date later that month. The contracting officer is Homer Shoup, reachable at homer.o.shoup.civ@us.navy.mil, and the procurement is managed by the Department of Defense through the Naval Supply Systems Command in Bremerton, Washington.

Navsup Flt Logistics Ctr Puget Sound

POSTED

about 20 hours ago

DEADLINE

CHARGER,BATTERY

Solicitation # N0010426QJB94

This contract pertains to the repair of a CHARGER,BATTERY under solicitation N0010426QJB94, issued by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, Pennsylvania. The Government requires a strict Repair Turnaround Time (RTAT) of 44 days, measured from the physical receipt of the asset at the contractor’s facility, as recorded in the Commercial Asset Visibility (CAV) system, to final Government acceptance. All repairs must conform to the original manufacturer's specifications and drawings, with strict adherence to MIL-STD-130 Rev N for marking and compliance with specified Cage Code and reference number A-57480-36-2. The contract mandates Government Source Inspection and requires the contractor to maintain complete inspection records for one year after final delivery. Freight is FOB Origin, and the Navy handles all logistics under the CAV Statement of Work. The award will be issued bilaterally and requires the contractor’s signed acceptance before execution. The contract includes mandatory compliance with Buy American and Free Trade Agreements, cybersecurity maturity model certification, and a Small Business Subcontracting Plan. The contractor must affirm they are an authorized distributor of the original manufacturer and provide supporting documentation. Pricing must be justified, especially if the item has not been previously purchased by NAVSUP WSS or if prices have increased, requiring comparable invoice data or historical pricing benchmarks. A T&E fee is allowed for items deemed beyond repair, up to a negotiated not-to-exceed amount. The contract contains an option for increased quantity exercisable within 365 days after award, with delivery at the same unit price. Late delivery results in monthly price reductions per unit, capped at a specified maximum, without limiting the Government’s right to terminate for default. All repairs must be performed under the contractor’s quality control system, with no substitutions allowed without written approval, and all documentation must include proper Distribution Statements in accordance with OPNAVINST 5510.1.

Navsup Weapon Systems Support Mech

POSTED

about 20 hours ago

DEADLINE

Solicitation # W911S226U3858

A 2-stroke, gasoline-powered, submersible, air-deployable outboard motor is being procured as a self-contained propulsion system for small craft, specifically qualified for CRRC airdrop configurations. The engine must feature through-hub exhaust, pull-start ignition, tiller-handle throttle control, rapid dewatering, and immediate operability after submersion. It must meet or exceed EPA 3-star emissions ratings on gasoline and be brand new, domestically manufactured, with active management in the DLA Federal Logistics System under a designated National Stock Number. The required service kit includes essential consumables such as a 10-foot fuel line with primer bulb, XD10 oil, universal motor flusher, fogging oil, and Salt-Away corrosion-removal concentrate with mixing unit to support fuel mixing, flushing, and long-term storage per manufacturer guidelines. The comprehensive service kit further includes a thermostat, thermostat cap gasket, anodes, spark plugs, fuel filter assembly and element, fuel line replacement kit, starter rope, stop switch lanyard, trim tab, water pump impellers, propeller assembly with hardware, thrust rod components, throttle wire, water pump replacement kit, and cowling strap replacement kit to ensure operational readiness and extended service life. The solicitation, identified as W911S226U3858, is a Small Business Set Aside under NAICS 335312, issued by the Department of Defense via the Office at Fort Drum, New York, with responses due by August 5, 2026.

W6QM Micc-Ft Drum

POSTED

about 20 hours ago

DEADLINE

Magnetic Contactor Supplier (NSN: 6110016827290, Part No: MX52CD)The contract requires the supply of a single magnetic contactor identified by NSN 6110016827290 and Part No MX52CD, fabricated to meet military specifications, ensuring compliance with performance, durability, and environmental standards expected for defense applications. The vendor must provide the item with appropriate packaging and labeling in accordance with military requirements, including accurate identification markings and documentation. Delivery is to be made FOB Origin within five business days of order placement, underscoring the urgency and time-sensitive nature of the procurement. The item is associated with NAICS code 335312, indicating it falls under electrical equipment manufacturing, and is being procured under the Department of Defense’s Maritime Supply Chain ESOC Buys initiative. The solicitation was posted on July 28, 2026, with a response deadline of August 10, 2026, and the place of performance is specified as Little Falls, Minnesota, 56345-4173, though the exact ship-to location is not detailed. The transaction is classified as a subcontract, and no set-aside provisions are indicated, leaving eligibility open to all qualified suppliers capable of meeting the technical and timeline demands.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

More opportunities from Department Of The Interior → Oregon State Office

Same awarding agency

KFFO- GERBER WELL BACK-UP GENERATOR

Solicitation # 140L4326Q0093

The contract titled KFFO- GERBER WELL BACK-UP GENERATOR is a solicitation issued by the Oregon State Office of the Department of the Interior, aiming to procure a back-up generator for the Gerber Well facility. The solicitation number is 140L4326Q0093, posted on July 28, 2026, with a response deadline of August 7, 2026, at 9:00 PM Eastern Time. The procurement falls under the NAICS code 335312, which corresponds to the manufacturing of electrical lighting and wiring equipment. This opportunity is open to general competition as no set-aside designation has been specified. The primary point of contact for inquiries is Kevin Cochran, reachable at 503-208-4855 or kevin_cochran@ios.doi.gov. The place of performance details are not fully specified, but the office responsible for the contract is located in Portland, Oregon, with a ZIP code of 97204. Interested parties must submit responses through the official SAM.gov portal linked in the solicitation.

Motor and Generator Manufacturing

POSTED

DEADLINE

R--Online management support services for chemical Ma

Solicitation # 140L4326Q0089

This contract solicitation for online management support services for chemical Material Safety Data Sheets (MSDS) and Safety Data Sheets (SDS) is a Total Small Business Set-Aside under FAR 19.5, targeting sole-source participation by small businesses. The work involves remote, non-personal services to maintain and manage a digital SDS database for Bureau of Land Management facilities in Oregon and Washington, ensuring compliance with OSHA’s Hazard Communication Standard, 29 CFR, 40 CFR, and the Globally Harmonized System (GHS). Key deliverables include an online database with advanced search, mobile and offline access, automated GHS-compliant updates, chemical inventory tracking, QR code and photo upload functionality for identification, hazard placard and secondary container label generation, and monthly progress reports. The contract includes a five-year base period with four optional renewal years, beginning September 22, 2026, and extending through September 21, 2031. All proposals must be submitted electronically via email to the Contracting Officer by 9:00 AM MT on July 31, 2026, organized into three volumes: Price, Technical Approach, and Past Performance. Evaluation prioritizes Technical and Past Performance as significantly more important than Price, with award based on the most advantageous offer using a trade-off process rather than LPTA. Payment must be submitted through the Treasury’s Invoice Processing Platform (IPP), and the contractor is responsible for archival and return of all government-furnished materials. Compliance with numerous FAR clauses is required, including whistleblower protections, anti-trafficking, paid sick leave, small business subcontracting incentives, and electronic funds transfer. The contractor must also implement inspection processes per 52.246-1 and adhere to security representations under deviations for clauses 52.240-90 and 52.240-91. Performance is conducted remotely with all deliverables addressed to the BLM Oregon State Office in Portland, OR.

Computing Infrastructure Providers, Data Processing, Web Hosting, and Related Services

POSTED

DEADLINE

J--Front and Rear-end collision repairs for a 2024 FO

Solicitation # 140L4326Q0088

This contract solicitation, identified by number 140L4326Q0088, seeks bids for front and rear-end collision repairs on a 2024 Ford F-150 XL Supercab under a Total Small Business Set-Aside, as defined by FAR 19.5. The work requires complete replacement and refinishing of front and rear components including the bumper cover, grille, headlamp, hood, fender, rear bumper assembly, tailgate, and related hardware with strict adherence to OEM repair standards, SAE torque specifications, and corrosion protection protocols such as neoprene tape and inhibiting pastes for dissimilar metal contact. All repairs must be defect-free, clean, and compliant with manufacturer guidance, with welds required to be free of defects and burn-through. Performance must occur at the contractor’s facility located within fifty miles of the BLM Northwest Oregon District Office in Salem, Oregon, with the period of performance running from August 17, 2026, to September 17, 2026. The government will inspect and accept the vehicle at the contractor’s site after corrections to any deficiencies, with final authority resting with the Contracting Officer. The procurement is issued by the Department of the Interior’s Oregon State Office in Portland, with Addison Page listed as the primary point of contact. Offerors must be certified small businesses in SAM and provide a Unique Entity Identifier and CAGE code, along with responses to mandatory representations regarding pending legal actions, debarment, or suspension status. Proposals must be submitted in two volumes—price and technical—via email to the Contracting Officer by 9:00 AM MT on July 31, 2026. Evaluation will prioritize Technical Capability and Past Performance as equally important to Price, allowing for trade-off selections to identify the most advantageous offer. Invoicing must be submitted electronically through the Invoice Processing Platform, and the contract will be awarded using a Firm-Fixed-Price structure based on the most advantageous proposal considering both cost and quality. Numerous FAR clauses are incorporated including those covering whistleblower rights, subcontracting protections, labor standards, equal opportunity, paid sick leave, combating trafficking in persons, and electronic payments. A deviation to clause 52.244-6 is authorized effective February 2025, and an alternate version of 1452.233-2 is in use. No pricing data, packaging requirements, or contract value estimates

Automotive Body, Paint, and Interior Repair and Maintenance

POSTED

DEADLINE

Coating and Containment Materials SupplyThe contract is for the supply of protective coating materials, containment system components such as tarps and scaffolding parts, and associated consumables under a Total Small Business Set-Aside designation, restricted exclusively to small businesses as defined by the SBA. It is classified under NAICS code 325510, corresponding to the paint and coating manufacturing industry, and is structured as a subcontract. The opportunity was publicly posted on July 21, 2026, with a firm deadline for responses on August 22, 2026. The ordering agency is the Oregon State Office within the Department of the Interior, though specific performance locations and point of contact details are not provided. All deliveries and services are expected to support federal operations requiring protective and containment solutions, with full compliance required for small business certification and procurement regulations.

Paint and Coating Manufacturing

POSTED

DEADLINE

Demobilization and Site RestorationThe contract titled Demobilization and Site Restoration pertains to the dismantling of containment systems, removal of equipment, final cleanup, and full restoration of the site to meet specified regulatory and environmental conditions. This effort is intended to return the location to a safe, stable, and compliant state following prior operations, ensuring no residual hazards or disruptions remain. The work must be performed in accordance with applicable standards and timelines, including thorough documentation and verification of site conditions post-restoration. This is a small business set-aside subcontract under NAICS code 238990, reserved exclusively for total small businesses as defined by the SBA. The solicitation was posted on July 21, 2026, with proposals due by August 22, 2026. The contract is managed by the Oregon State Office within the Department of the Interior, though specific location details and point of contact information are not provided. All work is expected to occur at an undesignated site under the jurisdiction of the federal agency, and bidders must be prepared to comply with federal requirements for site remediation and environmental restoration without reliance on pre-established site specifics.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Protective Coating ApplicationThe contract entails the application of a protective coating system including primer, intermediate, and topcoat layers to rehabilitated bridge surfaces, ensuring full compliance with manufacturer specifications and FP-24 standards. The work is focused on surface preparation and coating application to extend the service life and maintain structural integrity of bridge infrastructure, requiring precise adherence to technical guidelines for durability and environmental resistance. This is a subcontract under a Total Small Business Set-Aside as defined by FAR 19.5, with the NAICS code 238290 indicating specialty trade contractors engaged in structural steel and metal fabrication and coating. The solicitation was posted on July 21, 2026, and responses are due by August 22, 2026. The contracting agency is the Oregon State Office under the Department of the Interior, though specific performance location and contact details are not provided. All interested parties must meet small business eligibility requirements and be prepared to execute work in accordance with federal and manufacturer-mandated coating protocols.

Other Building Equipment Contractors

POSTED

DEADLINE

Surface Preparation and Abrasive BlastingThe contract titled Surface Preparation and Abrasive Blasting is a small business set-aside opportunity under the SBA program, reserved exclusively for total small business concerns as defined by FAR 19.5. It requires the removal of existing coatings, rust, and contaminants from steel surfaces on bridges using abrasive blasting or other approved methods to achieve proper surface preparation for new coating applications. The work falls under NAICS code 238290 and is being procured by the Oregon State Office of the Department of the Interior, though specific performance location details including city, state, and zip code are not provided in the data. The solicitation was posted on July 21, 2026, with a response deadline set for August 22, 2026, and it is structured as a subcontract, indicating it may be part of a larger project or prime contract. All work must comply with industry standards for surface preparation to ensure the longevity and integrity of future protective coatings.

Other Building Equipment Contractors

POSTED

DEADLINE

Full Containment System Design and InstallationThe contract calls for the design, engineering, and full installation of a containment system specifically mandated to prevent environmental contamination during bridge coating operations. This includes the development of detailed structural calculations and comprehensive working drawings to ensure the system meets all safety and regulatory requirements. The project requires a specialized understanding of environmental protection measures in active construction zones, particularly around waterways or sensitive ecosystems, and demands precision in execution to guarantee no hazardous materials escape during the coating process. This is a total small business set-aside under the SBA program, restricted solely to small business concerns as defined by FAR 19.5, and falls under NAICS code 238910 for site preparation contractors. The opportunity was posted on July 21, 2026, with a response deadline of August 22, 2026, and is issued as a subcontract. The contracting agency is the Oregon State Office under the U.S. Department of the Interior, though specific performance location details are not provided. All work must be completed in compliance with federal environmental guidelines and structural integrity standards to ensure long-term effectiveness and safety.

Site Preparation Contractors

POSTED

DEADLINE

Mobilization and Site SetupThe contract titled Mobilization and Site Setup is a small business set-aside opportunity under the SBA Total Small Business Set-Aside program, classified under NAICS code 238990 for other specialized construction activities. It requires the contractor to perform full site mobilization including preparation of the work area, coordination of logistics, establishment of temporary facilities, installation of traffic control measures, and completion of initial safety and environmental compliance checks to ensure regulatory readiness prior to main construction activities. The solicitation was posted on July 21, 2026, with a response deadline of August 22, 2026, and is issued by the Oregon State Office under the Department of the Interior. Performance location details are not specified, and the opportunity is exclusively available to qualified small businesses as defined by federal standards. The contract does not provide details on monetary value or duration beyond the mobilization scope described.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Green Procurement and Sustainable Products AdvisoryThe contract seeks advisory services to support the sourcing and verification of environmentally preferable products in accordance with established federal guidelines including the EPA Comprehensive Procurement Guidelines, USDA Biobased Product Program, Energy Star, and Federal Energy Management Program standards. The work involves evaluating product life-cycle impacts, ensuring compliance with sustainability criteria, and providing expert recommendations to align procurement decisions with federal environmental mandates. This is a subcontract under a Total Small Business Set-Aside, exclusively available to small businesses, and is classified under NAICS code 541620 for environmental consulting services. The opportunity is issued by the Oregon State Office of the Department of the Interior with a posted date of July 21, 2026 and a response deadline of August 4, 2026. Performance location details are not specified, and no point of contact information is provided in the posting. Interested parties must respond by the deadline to be considered, and eligibility is restricted to small businesses certified under the SBA’s small business set-aside program. The contract aims to enhance the agency’s ability to implement sustainable procurement practices by integrating recognized eco-labels and environmental performance benchmarks into daily operations.

Environmental Consulting Services

POSTED

DEADLINE

Environmental and Regulatory Compliance SupportThis contract provides advisory services to ensure compliance with federal regulations during material handling and delivery operations, specifically addressing requirements under 29 CFR 1910.1001 for asbestos management, the Endangered Species Act, and the National Historic Preservation Act. The scope involves guiding responsible practices to mitigate environmental and cultural risks, ensuring that all activities align with legal standards to prevent harm to protected species, historic properties, and worker safety. The services are critical for maintaining regulatory alignment throughout logistics and construction-related processes in sensitive areas. The contract is structured as a small business set-aside under the SBA program, classified under NAICS code 541620 for environmental consulting, and is issued by the Department of the Interior through the Oregon State Office. It is open for proposals until August 4, 2026, with no specified place of performance or point of contact listed, indicating that work may occur across various locations under federal jurisdiction where material handling takes place. The subcontract nature implies the selected provider will support a larger entity or project requiring strict adherence to federal environmental and occupational regulations.

Environmental Consulting Services

POSTED

DEADLINE

Logistics and Delivery to Vale, OR (FOB Destination)The contract requires the transportation and final delivery of HDPE pipe coils and reels to the specified warehouse located at 102 WAREHOUSE OREGON STREET, VALE, OR 97918, with all responsibilities and risks transferring to the buyer only upon arrival at the destination, consistent with FOB Destination terms. The work is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses as defined by the SBA are eligible to bid, and the North American Industry Classification System code 484220 applies, indicating a focus on truck transportation of freight. The solicitation was posted on July 21, 2026, with responses due by August 4, 2026, at 9:00 PM Eastern Time, and the contracting authority is the Department of the Interior through the Oregon State Office. The delivery location is clearly defined, and no additional performance locations or point of contact details are provided beyond the destination address.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE