Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Supply and Delivery of Electrical Fuel Pumps

Active

Federal

Response Deadline07/28/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the procurement, packaging, marking, and delivery of four electrical fuel pumps identified by NSN 2910-01-732-6937, with strict adherence to military packaging, labeling, and hazard communication standards to ensure full compliance with Department of Defense requirements. All units must be prepared and shipped in accordance with federal and military specifications, including proper documentation and handling procedures for hazardous materials, ensuring safe transport and operational readiness upon arrival. The place of performance is designated as Virginia Beach, Virginia, with a delivery address of 23459-3018, and the work must be completed under the NAICS code 333612, which classifies the activity within the aircraft engine and engine parts manufacturing sector. The opportunity is posted as a subcontract under the Aviation Supply Chain division of the Department of Defense, with a response deadline of July 28, 2026, and the solicitation was made public on July 20, 2026, through the DIBBS system.

General Info

Procure and deliver four military-spec fuel pumps to Virginia Beach by July 28, 2026, complying with hazardous material and DoD standards.

Agency

Department Of Defense → AVIATION SUPPLY CHAINView Agency

NAICS

333612 - Speed Changer, Industrial High-Speed Drive, and Gear ManufacturingView NAICS

Place of Performance

VIRGINIA BEACH, VA, 23459-3018, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 20

subcontract

Response DeadlineJul 28

Submission deadline

Response Deadline

07/28/2026, 05:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → AVIATION SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → AVIATION SUPPLY CHAIN

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Procure, package, mark, and deliver 4 units of electrical fuel pumps (NSN: 2910-01-732-6937) compliant with military packaging, marking, and hazard communication standards.

Similar Contracts

Same NAICS industry code

GEAR SECTOR, SPURThis contract pertains to the procurement of a single gear sector, spur with NSN 3020-01-611-7082 and part number MTM-10503, issued by the Defense Logistics Agency under solicitation SPE7L3-26-T-124S. The requirement is for one unit to be delivered within ten days of contract award, with delivery terms set at FOB origin and no variance allowed in quantity. All packaging must comply with ASTM D3951 and MIL-STD-129, and palletization must adhere to DLA’s specific packaging directives, with the DLA Master List of Technical and Quality Requirements taking full precedence over any referenced standards. The item is to be shipped by the fastest traceable means, excluding parcel post, to a U.S. Army facility in Drawsko Pomorskie, Poland, under shipment RDD 555, with the marking and freight address clearly identified. The supply is classified under NAICS code 333612 and is subject to government-only use designations including IPD 05 and DIC A0A. The required delivery date is July 14, 2026, and the solicitation was posted on July 21, 2026, with responses due by August 3, 2026. Technical and quality requirements are incorporated reference-only via the DLA Master List, accessible online, with control determined by the solicitation or award date depending on acquisition size. The point of contact for inquiries is Lee Miller, and the contract is administered under the Department of Defense’s Land Supplier Operations Vehicle Support division. The unit of issue is each, and the total contract value is $1.00.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 13 hours ago

DEADLINE

GEAR CLUSTERThe contract pertains to the procurement of a GEAR CLUSTER, identified by NSN 3020-01-251-4522 and part number RYLC 369, with a total quantity of 182 units. Delivery is required within 171 days from the contract award, with shipment to be made FOB origin and inspected and accepted at the destination. The packaging must comply with ASTM D3951 and MIL-STD-129, with palletization governed by DLA’s packaging requirements, and all markings and labeling must adhere to DLA standards. Compliance with the DLA Master List of Technical and Quality Requirements supersedes any conflicting specifications, including those in ASTM D3951. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise noted, and attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. The item is classified as a critical application item requiring strict quality control. The contractor must also meet Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment requirements and physically mark the bare item per RQ017. The unit of issue is each (EA), with no tolerance for quantity variance. The delivery destination is Hill Air Force Base, Utah, with transportation and shipping details governed by DLAD proc notes C19 and C20. The original required delivery date is May 17, 2027, with a need ship date of January 17, 2027. The contract was issued under solicitation SPE4A5-26-T-300C, with a response deadline of July 29, 2026, and NAICS code 333612. Primary point of contact is Kirstie Ragsdale, and all technical and quality provisions referenced by R or I numbers are sourced from the DLA Master List, with revisions tied to the solicitation or amendment date depending on acquisition size.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 13 hours ago

DEADLINE

GUARD, MECHANICAL DRIVEThe contract specifies the procurement of one mechanical drive guard under solicitation SPE7L1-26-T-858W, with NSN 3020-01-608-5193 and a required delivery in ten days FOB origin. All items must strictly comply with the DLA Master List of Technical and Quality Requirements referenced by R or I numbers, which supersede any conflicting specifications, including ASTM D3951. Packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with unit packaging defined as QUP 001 and palletization per prescribed standards. Ozone depleting chemicals are explicitly prohibited, and any substitute materials require prior approval unless already authorized by specification. The item incorporates specialty metals, triggering DFARS clauses 252.225-7008, 252.225-7009, and 252.225-7010. Quality management follows ISO 9001:2015, and inspection and acceptance occur at origin with a certificate of conformance authorized unless overridden by a quality assurance letter. Configuration changes require an engineering change proposal or variance request. The delivery destination is Camp Humphreys, Building P6953, Pyeongtaek, Korea, with shipment coordinated per DLAD Proc Note C19 and C20. The required delivery date is July 17, 2026, and the contract supports a single unit at a price of one dollar.

LAND SUPPLY CHAIN

POSTED

about 13 hours ago

DEADLINE

BELLOWS, PRESSURE

LAND SUPPLY CHAIN

POSTED

about 13 hours ago

DEADLINE

PULLEY, GROOVEThe contract pertains to the procurement of a PULLEY, GROOVE with NSN 3020-01-700-7760 and part number C63141-00A from SMITH-BERGER MARINE, INC, under solicitation SPE7LX-26-U-8913, with an estimated quantity of five units at a unit price of $5.00 and a total price of $25.00. Delivery is required FOB origin within 153 days, with no tolerance for quantity variance—strictly plus or minus zero percent. Inspection and acceptance both occur at the destination, and the item is subject to the DLA Master List of Technical and Quality Requirements identified by R or I numbers, as well as DLA Packaging Requirements for Procurement. All packaging must comply with MIL-STD-2073-1E, including specific methods for preservation, wrapping, cushioning, and container type, with marking requirements following MIL-STD-129, including special labeling such as “ARROW UP,” “OPEN THIS SIDE,” and “MECHANICAL HANDLING REQUIRED.” Serial numbers must be marked on the unit, intermediate, and shipping container labels, and reflected on the packing list per MIL-STD-129 paragraphs 5.4.1.1.1, 5.4.1.1.2, 5.4.1.2.1, and 5.4.1.2.2. The supply is covered under DLA Direct, CONUS, and unit of issue is each, consistent with DoD and ANSI X12 standards. The solicitation was posted on July 21, 2026, with a response deadline of August 5, 2026, and is managed by the Department of Defense’s Strategic Acquisition Program Directorate.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 13 hours ago

DEADLINE

30--PULLEY,GROOVE

DLA Land And Maritime

POSTED

about 18 hours ago

DEADLINE

Manufacturing of Nonvehicular Universal Joints (RA001)The contract calls for the full-scale manufacturing of four units of a Nonvehicular Universal Joint identified by NSN 3010-01-400-6047, engineered to meet all technical specifications and configuration controls established by the Defense Logistics Agency. Production must adhere strictly to DLA’s quality, testing, and documentation standards, with delivery required to the specified performance location in Tracy, California, ZIP 95304-5000. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, designated under FAR 19.5, ensuring eligibility is restricted to small businesses as defined by the Small Business Administration. The NAICS code 333612 classifies this procurement under Other Engine Equipment Manufacturing, indicating the specialized nature of the components being produced. All proposals must be submitted by the response deadline of July 30, 2026, following the federal procurement framework, with the contract issued by the Department of Defense through its Land Supply Chain division.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of HUB (NSN 3930-01-123-2526)One unit of a HUB identified by NSN 3930-01-123-2526 and part number 679739 is to be procured and delivered in full compliance with all packaging, labeling, and invoicing specifications. Delivery must be completed within five days of contract award, with terms set at FOB origin. The solicitation was posted on July 20, 2026, with responses due by July 31, 2026, under a subcontract type with NAICS code 333612. The contract is managed by the Department of Defense under the agency name Construction & Equipment Manu & Con, and performance is required at a location in McAlester, Oklahoma, with a zip code of 74501-5000.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Actuator Body Manufacturing and AssemblyThe contract requires precision machining, fabrication, and assembly of military-grade actuator bodies designated by NSN 3010010849596, with strict adherence to defense specifications and hazardous material handling protocols. All work must be performed to ensure full compliance with military standards, emphasizing quality, durability, and safety in environments where operational reliability is critical. The scope includes end-to-end manufacturing processes from raw material processing through final assembly, with rigorous quality control measures embedded at every stage to meet defense-grade requirements. The contract is categorized as a subcontract under NAICS code 333612 and is managed by the Department of Defense under the organization name LAND SUPPLIER OPNS VEHICLE SPT. Performance is designated for New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on July 20, 2026, and responses are due by July 31, 2026, indicating a tight turnaround for qualified subcontractors to submit proposals. There is no set-aside designation specified, and no point of contact is listed, requiring interested parties to reference the official DIBBS portal link for additional submission details and technical requirements.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Supply of Flexible Shaft Couplings (NSN: 3010012771277)The contract calls for the manufacture and delivery of eight flexible shaft couplings identified by NSN 3010012771277, with all units required to meet military standards for packaging, marking, and traceability to ensure full compliance with defense logistics protocols. The work is classified as a subcontract under NAICS code 333612, indicating it pertains to the manufacturing of industrial machinery components. Performance of the contract is designated for Tracy, California, with a zip code of 95304-5000, and all deliveries must be completed at this location. The solicitation was posted on July 20, 2026, with responses due by July 31, 2026, providing a limited window for qualified vendors to submit proposals. The contracting activity is tied to the Department of Defense under the Land Supplier Operations Vehicle Support organization, reflecting its critical role in sustaining military vehicle systems. Participation requires strict adherence to government quality and documentation requirements to support end-to-end supply chain integrity.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Manufacture of Electrical Solenoids (NSN 5945-00-407-7030)The contract entails the full lifecycle production of electrical solenoids designated by NSN 5945-00-407-7030, requiring compliance with military specifications throughout all phases including design, assembly, testing, packaging, and delivery. The work must meet stringent defense standards to ensure operational reliability and performance in mission-critical applications. This is a subcontract opportunity set aside exclusively for Women-Owned Small Businesses under the WOSB program, with the NAICS code 333612 identifying the industry classification for other engine equipment manufacturing. The solicitation was posted on July 20, 2026, with responses due by August 4, 2026, managed by the Maritime Supply Chain division within the Department of Defense. The place of performance and point of contact details are unspecified in the available data, but all work must be executed in accordance with federal defense procurement requirements and delivered to meet military logistical timelines.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

UNIVERSAL JOINT, NONVEHThe contract is for the procurement of four universal joints, nonvehicular, identified by NSN 3010-01-400-6047, under solicitation SPE7L1-26-Q-1335, with a total small business set-aside and a 241-day delivery timeline. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date or award date depending on acquisition size. Packaging must comply with DLA standards, and the use of Class I ozone-depleting chemicals is strictly prohibited; any substitutions require prior approval unless explicitly authorized by the specification. The supply is subject to stringent configuration change management, requiring engineering change proposals and formal variance requests for any deviations. Inspection and acceptance may occur at the manufacturer’s origin, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Technical data associated with this item is subject to export controls under ITAR or EAR, restricting access to foreign persons and requiring compliance with DFARS 252.225-7048; only DLA-approved contractors holding JCP certification, who have completed required DOD training and questionnaire, may access this data. Cybersecurity requirements mandate CMMC Level 2 certification by a certified third-party assessment organization, and covered defense information protocols are enforced. The contracting activity is the Department of Defense’s Land Supply Chain, with performance to be delivered to Tracy, CA, and primary point of contact is Meghan Ruehle.

LAND SUPPLY CHAIN

POSTED

DEADLINE

More opportunities from Department Of Defense → AVIATION SUPPLY CHAIN

Same awarding agency

MH60GUIDEXThe contract MH60GUIDEX under solicitation SPE4A1-26-T-2470 pertains to the procurement of 23 units identified by NSN 5340-01-521-7001 for delivery to Robins AFB, Georgia, with a deadline of 171 days after award. It mandates compliance with Cybersecurity Maturity Model Certification (CMMC) Level 2 requirements as a certified third-party assessment organization and incorporates stringent controls for Covered Defense Information, requiring adherence to DLA’s technical and quality standards referenced in the Master List. The supplier must retain supply chain traceability documentation per DLAD Procurement Note C03 from August 2016, and while Item Unique Identification is not required, removal of government identification from non-accepted supplies is mandated. Packaging must comply with DLA standards, and technical data associated with the item is subject to export control under ITAR or EAR, restricting access to contractors with approved JCP certification, completed training, and DLA authorization. Sampling procedures must conform to MIL-STD-1916, ASQ H1331, or an equivalent zero-based plan, with specified verification levels and AQLs for critical, major, and minor attributes; if unspecified, attributes are deemed major. Sikorsky Corporation’s alternate sampling plan QAP 1201 is acceptable provided it meets or exceeds the performance of MIL-STD-1916 or ASQ H1331, and zero non-conformances are required unless otherwise stipulated. Measuring and test equipment must be calibrated and controlled, and all technical data must be protected against unauthorized export, including to foreign nationals within the U.S., under DFARS 252.225-7048. The contract is issued by the Department of Defense’s Aviation Supply Chain under NAICS code 332510, with Monneka Giles as the primary point of contact, and the solicitation was posted on July 21, 2026, with responses due by July 29, 2026.

Hardware Manufacturing

POSTED

about 13 hours ago

DEADLINE

SUPPORT, STRUCTURALThe contract pertains to the procurement of a structural aircraft component identified by part number 70219-04203-067 and NSN 1560016184305, with a quantity of ten units to be delivered FOB origin within 171 days of the contract award, targeting a delivery date of January 17, 2027, and an original required delivery date of February 6, 2028. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with precedence over commercial standards such as ASTM D3951. Packaging must comply with MIL-STD-129 and DLA Packaging Requirements for Procurement (RP001), with hazardous materials subject to FED-STD-313 and IP025, while non-hazardous items require commercial packaging under DLA’s directives. Supply chain traceability documentation must be retained per DLA Directive Procurement Note C03 from August 2016, and physical identification marking is required per RQ017, though item unique identification is waived by the service customer under DFARS 252.211-7003(c)(1)(i). Cybersecurity compliance is mandated at CMMC Level 2 through self-assessment, and certification of conformance procedures under FAR 52.246-15 are authorized unless overridden by a quality assurance letter. Sampling follows Sikorsky Corporation’s alternate plan QAP 1201, which must meet or exceed ASQ H1331 or MIL-STD-1916 standards. Inspection and acceptance occur at the destination, with no quantity variance permitted. The contract is issued under solicitation SPE4A1-26-T-2472, with delivery addressed to DLA Distribution San Diego, and transportation logistics guided by DLAD Procurement Notes C19 and C20.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

SEAL, PLAINThis contract pertains to the procurement of a SEAL, PLAIN item with NSN 5330-01-587-1000, quantity of 19 units, under solicitation SPE4A1-26-T-2477. The item must be packaged and sealed in a medium-duty, waterproof, greaseproof, opaque bag according to MIL-DTL-117, Type II, Class C, Style 1, and marked in compliance with MIL-STD-129 without special marking codes. Packaging and shipping must adhere to MIL-STD-2073-1E, with specific preservation methods and container codes defined, and palletization must follow DLA Packaging Requirements for Procurement RP001. Delivery is FOB origin with a 171-day lead time, set for January 17, 2027, and inspection and acceptance occur at the destination. The item is not subject to shelf life restrictions or Unique Item Identification per customer request. Supply chain traceability documentation must be retained by the contractor per DLA Directive Procurement Note C03 (August 2016), and cybersecurity requirements mandate CMMC Level 2 self-assessment. Sampling follows Sikorsky Corporation’s alternate plan QAP 1201, which must meet or exceed ASQ H1331 or MIL-STD-1916 standards. A Certificate of Conformance is authorized unless overridden by a Quality Assurance Letter of Instruction. All technical and quality requirements are governed by the DLA Master List, with revision control tied to the solicitation or award date depending on acquisition size. The delivery address is DLA Distribution Jacksonville, and transportation protocols reference DLAD Procurement Notes C19 and C20.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 13 hours ago

DEADLINE

Fabric Coating Mills

POSTED

about 13 hours ago

DEADLINE

TUBING, NONMETALLIC

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 13 hours ago

DEADLINE

SLEEVE, HOUSING, AIR INL

Turbine and Turbine Generator Set Units Manufacturing

POSTED

about 13 hours ago

DEADLINE

REPAIR KIT, PROTECTIThis contract pertains to the procurement of a Repair Kit, Protective, identified by NSN 6605-01-079-1890 and part number 37493-3B from Engelhard Corp Specialty Div and W3T105158 from Evoqua Water Technologies LLC, with a total quantity of 31 units to be delivered in 19 days FOB origin. The contract enforces strict adherence to the DLA Master List of Technical and Quality Requirements, which override other standards, including ASTM D3951, and mandates packaging in compliance with MIL-STD-129 and DLA Packaging Requirements. The item is classified as a Critical Application Item and must not contain any intentional mercury or mercury compounds, except in exempted functional components such as batteries, fluorescent lamps, or specialized instruments, which must meet NAVSEA 5100-003D guidelines for secondary containment and shock resistance. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. Cybersecurity requirements include CMMC Level 2 self-assessment and treatment of the item as Covered Defense Information. Delivery is directed to DLA Distribution San Joaquin in Tracy, CA, with inspection and acceptance occurring at the destination, and the unit of issue is each. The contract prohibits removal of government identification from non-accepted supplies and requires hazardous material packaging per TQ requirement IP025 if applicable. The solicitation was issued on July 21, 2026, with a response deadline of July 29, 2026, and the original delivery date is set for December 25, 2026, with a need ship date of August 18, 2026.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 13 hours ago

DEADLINE

CHA FING STRIP, AIRCRThe contract is for the supply of a chafing strip for aircraft, identified by NSN 1680-01-397-1101 and part number 70219-04500-109, with a quantity of 73 units to be delivered FOB origin within 171 days. The item is designated as a critical application item for Sikorsky Aircraft Corporation, and the contractor must comply with strict packaging standards per ASTM D3951 and MIL-STD-129, with palatalization following DLA Packaging Requirements for Procurement. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, with Sikorsky’s alternate sampling plan QAP 1201 acceptable if it meets or exceeds these standards. Inspection and acceptance occur at the destination, and no quantity variance is permitted. The item is not required to have unique identification per customer request, but the contractor must retain supply chain traceability documentation in accordance with DLA Directive Procurement Note C03 from August 2016. Cybersecurity compliance is mandated at CMMC Level 2 through self-assessment, and the contract incorporates covered defense information requirements. All technical and quality specifications referenced by R or I numbers are sourced from the DLA Master List of Technical and Quality Requirements, which supersede any other standards including packaging guidelines. The item must be marked and labeled as per MIL-STD-129, and the delivery destination is specified as DLA Dist San Joaquin in Tracy, CA. The contract is issued under solicitation SPE4A1-26-T-2471, managed by the Department of Defense’s Aviation Supply Chain, with Monneka Giles as the point of contact. The original required delivery date is June 26, 2027, with a need ship date of January 17, 2027, and the unit price is $73.00 per item, totaling $5,329.00.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

CMMC Level 2 Self-Assessment and CDI SafeguardingThe contract requires the performance of a CMMC Level 2 self-assessment and the implementation of NIST SP 800-171 controls to safeguard Covered Defense Information and ensure compliance with cyber incident reporting obligations. This subcontract is intended for organizations capable of assessing their current cybersecurity posture against the CMMC Level 2 requirements and executing necessary technical and procedural controls to meet federal defense cybersecurity standards. The work must be performed at the designated place of performance in Virginia Beach, Virginia, with a deadline for responses set for July 28, 2026. The solicitation falls under NAICS code 541512, categorizing it within computer systems design services, and is managed by the Department of Defense through its Aviation Supply Chain office. All activities must be completed in alignment with the Defense Industrial Base’s cybersecurity framework to protect sensitive information and maintain readiness for future contractual obligations.

Computer Systems Design Services

POSTED

DEADLINE

MIL-STD-2073-1E Compliant Packaging and PreservationThe contract requires the packaging and preservation of four electrical fuel pumps in strict compliance with MIL-STD-2073-1E and DLA RP001 standards, ensuring each unit is properly cushioned, marked, and assigned traceable identification to meet Department of Defense preservation and handling requirements. All work must adhere to the specified military packaging criteria, which include secure internal cushioning, correct external labeling, and documentation that enables full traceability throughout the supply chain. This is a subcontract solicitation issued by the Aviation Supply Chain under the Department of Defense, with a response deadline of July 28, 2026, and a place of performance in Virginia Beach, Virginia, at ZIP code 23459-3018. The NAICS code 493190 categorizes the work under Other Support Activities for Transportation, indicating the nature of the services involves logistics and supply chain support. The solicitation is publicly accessible via the DIBBS portal, and all contractors must ensure full compliance with the referenced standards and delivery timelines to meet contractual obligations.

Other Warehousing and Storage

POSTED

DEADLINE

Hazard Warning Labeling and MSDS PreparationThe contract requires the preparation of hazard warning labels and Material Safety Data Sheets for electrical fuel pumps, ensuring full compliance with OSHA’s Hazard Communication Standard and DFARS regulations. The work must accurately convey the chemical and physical hazards associated with the fuel pumps, providing clear, standardized safety information for handlers, users, and emergency responders. All documentation must align with federal mandates for hazard classification, labeling elements, and SDS formatting to meet mandatory safety and procurement requirements. This is a subcontract under the Department of Defense’s Aviation Supply Chain, with performance located in Virginia Beach, Virginia, at the ZIP code 23459-3018. The solicitation was posted on July 20, 2026, and responses are due by July 28, 2026. The NAICS code 541690 indicates this falls under Other Scientific and Technical Consulting Services, reflecting the specialized technical expertise needed to generate compliant safety documentation. While no specific set-aside status is indicated, the contract remains open to qualified subcontractors capable of delivering precise, regulated safety materials for defense-related equipment.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

PUMP, FUEL, ELECTRICAThis contract pertains to the procurement of four electrical fuel pumps identified by NSN 2910-01-732-6937 and part number 4953063, with a total value of $4.000 per unit under solicitation SPE4A1-26-T-2469. Delivery is required within 20 days of contract award, with shipments destined for Virginia Beach, Virginia, under FOB Origin terms and zero tolerance for quantity variance. All items must comply with MIL-STD-2073-1E packaging standards, including specified methods for preservation, wrapping, and containment, and must be marked in accordance with MIL-STD-129 without special marking codes. The item is not subject to Unique Item Identification, per DFARS 252.211-7003. The product must not contain mercury or mercury compounds except where explicitly exempted, such as in batteries, fluorescent lights, or specialized instrumentation, and any portable mercury-containing devices must have shockproof construction with secondary containment as defined by NAVSEA 5100-003D. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero nonconformances required unless otherwise stated, and verification levels are set at VII, IV, and II for critical, major, and minor attributes respectively. Cybersecurity requirements mandate a CMMC Level 2 self-assessment, and the supplier must adhere to DLA packaging guidelines and the DLA Master List of Technical and Quality Requirements referenced by R or I numbers. Shipment must be delivered via the fastest traceable means, explicitly excluding parcel post, and the contracting officer’s point of contact is Vincent Williams at the Defense Logistics Agency. The required delivery date is July 10, 2026, and the solicitation response deadline is July 28, 2026.

Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

DEADLINE