Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Supply and Delivery of One-Ton Crew Cab Dump Trucks

Active

International

Response Deadline10/16/2026, 06:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the supply and delivery of two one-ton crew cab dump trucks for the Municipality of Clarington. The contractor is responsible for providing vehicles that meet specific gross vehicle weight requirements, including necessary axle, spring, and tire configurations. The scope of work includes the installation of underbody hoist systems using VOTH aluminum Job Boss or Commander Industries Dirt Master equivalents, with one unit specifically configured with a toolbox headboard. The final deliverable consists of two fully equipped and operational trucks delivered to the prime contractor.

General Info

Supply and delivery of two one-ton crew cab dump trucks for Municipality of Clarington.

Agency

Municipality of Clarington

NAICS

336211 - Motor Vehicle Body Manufacturing

Place of Performance

CAN

Set-Aside

NONE

Documents

This scope was carved out of CL2026-42.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Supply and Deliver Two (2) One-Ton Crew Cab Dump Trucks

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedSep 28

subcontract

Response DeadlineOct 16

Submission deadline

Response Deadline

10/16/2026, 06:00:00 PM UTCin 17 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyMunicipality of Clarington

ContactsNo contacts available

OfficeN/A

Organization / AgencyMunicipality of Clarington

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies and delivers two One-Ton Crew Cab Dump Trucks for prime contractors on Municipality of Clarington vehicle procurements. Provisions vehicles meeting GVW specifications, including axle, spring, and tire requirements. Configures one unit with a Toolbox Headboard and installs underbody hoist systems using VOTH aluminum Job Boss or Commander Industries Dirt Master equivalents. Delivers two fully equipped and operational trucks.

Similar Contracts

Same NAICS industry code

Component Manufacturing: Direct Action Shock Absorbers

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 22 hours ago

DEADLINE

Solicitation # SPE7L1-26-T-12H5

This solicitation, issued by DLA Land and Maritime, is for the procurement of one carbon steel wheel support, identified by NSN 2510-01-211-0980. The requirement is governed by specific technical data packages, including Basic Drawing NR 19207 11625341 and Reference Drawing NR 19207 11625341, Revision 06. The procurement is subject to full and open competition, with a price evaluation preference provided for certified HUBZone small business concerns. A critical manufacturing restriction prohibits the use of additive manufacturing processes unless specifically authorized in writing by the contracting officer. Additionally, the contract strictly prohibits the use of Class I ozone-depleting chemicals, requiring any substitute chemicals to be submitted for approval. Quality assurance is a primary focus, requiring manufacturers to maintain an inspection system that complies at a minimum with SAE AS9003 or ISO 9001. Sampling must follow MIL-STD-1916, ASQ H1331, or a comparable zero-based sampling plan, with specific verification levels assigned to critical, major, and minor attributes. Inspection and acceptance will both occur at the origin. Packaging must adhere to ASTM D3951, with DLA Master List requirements taking precedence, and all marking and labeling must comply with MIL-STD-129. The final product is to be delivered to Fort Hood, TX, with an original required delivery date of August 25, 2026. Contractors must also comply with various domestic sourcing regulations, including the Buy American Act and the Berry Amendment, and are required to use the Wide Area WorkFlow system for electronic invoicing and receiving reports.

LAND SUPPLY CHAIN

POSTED

about 22 hours ago

DEADLINE

FLOOR, BODY, VEHICULAR

Solicitation # SPE7L3-26-T-259A

Solicitation SPE7L3-26-T-259A is a Request for Quotations issued by the Department of Defense, specifically DLA Land and Maritime, for the procurement of 10 kits of vehicular body floors under NSN 2510-01-352-3798. This procurement is set aside for Women-Owned Small Businesses, requiring SBA certification for eligibility. The delivery is scheduled for April 15, 2027, with a need ship date of March 9, 2027, and is designated as FOB Origin. The items are to be delivered to DLA Distribution Red River in Texarkana, Texas, where both inspection and acceptance will take place. The contract mandates strict adherence to quality and technical standards, requiring manufacturers to comply with SAE AS9003 or ISO 9001. Technical data is subject to ITAR and EAR export controls, and contractors must be approved by the DLA controlling authority to access such data. Packaging must follow MIL-STD-129 and RP001, with each kit packaged individually and marked with specific handling instructions. Additionally, the solicitation incorporates cybersecurity requirements, including CMMC Level 2 certification and DFARS 252.204-7012 for safeguarding covered defense information. Offerors must also comply with the Buy American Act and the Berry Amendment regarding domestic sourcing. All payment requests and receiving reports must be processed electronically through the Wide Area WorkFlow system.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 22 hours ago

DEADLINE

SHOCK ABSORBER, DIRECT

Solicitation # SPE7L3-26-T-292V

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 22 hours ago

DEADLINE

STAND, AIR, TANKER

Solicitation # SPE7L3-26-T-288M

Solicitation SPE7L3-26-T-288M is issued by DLA Land and Maritime for the procurement of one tanker air stand, identified by NSN 2510-01-159-1729 and Oshkosh Defense LLC part number 2246980. The requirement is categorized under NAICS 336211. The delivery is specified as FOB Origin with a required delivery date of September 24, 2026, and a delivery lead time of five days after receipt of order. The item is to be shipped to Camp Arifjan in Kuwait City, Kuwait. Inspection and acceptance will occur at the destination in accordance with FAR 52.246-2. Packaging must comply with ASTM D3951 and RP001, while marking and labeling must adhere to MIL-STD-129. The contract incorporates various federal regulations, including the Buy American Act, Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information. All quotes must be submitted via the DIBBS portal by October 8, 2026, and payment requests are to be processed through the Wide Area Workflow system.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

SHOCK ABSORBER, DIRECT

Solicitation # SPE7L3-26-T-288A

Solicitation SPE7L3-26-T-288A is a fixed-price request for quotations issued by the Department of Defense, DLA Land and Maritime, for the procurement of 103 direct action shock absorbers under NSN 2510-01-411-4866. This procurement is a total small business set-aside under NAICS code 336211. The delivery period is 594 days after the award, with a need ship date of February 25, 2028, and a final required delivery date of May 4, 2028. The items are to be delivered FOB Origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract includes stringent quality and security requirements, including First Article Testing for one unit and compliance with SAE AS9003 or ISO 9001 standards. Technical data is subject to ITAR or EAR export controls, and contractors must meet CMMC Level 2 certification via a C3PAO. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with specific requirements for team lift marking and the prohibition of mercury compounds. Payment and invoicing will be processed electronically through the Wide Area WorkFlow system. Quotations must be submitted via DIBBS by October 8, 2026.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

KINGPIN, FIFTH WHEEL

Solicitation # SPE7L3-26-T-287X

Solicitation SPE7L3-26-T-287X, issued by the DLA Land and Maritime Land Supplier Ops Vehicle Support, is for the procurement of four fifth wheel kingpins, identified by NSN 2510011097054. This is designated as a critical application item and must be manufactured in accordance with Basic CID A-A-52479 (Revision 10/21/1993) and TDP Rev A Gen 1. The procurement is conducted under full and open competition with a specific price evaluation preference for certified HUBZone small businesses. The required delivery date is June 19, 2027, with a need ship date of March 23, 2027, and a delivery lead time of 165 days after order. The contract specifies that inspection and acceptance will occur at the origin. Quality assurance requires adherence to the DLA Master List of Technical and Quality Requirements, with sampling conducted per MIL-STD-1916, ASQ H1331, or a comparable zero-based sampling plan. Packaging must comply with RP001 and ASTM D3951, while marking and labeling must follow MIL-STD-129. The use of Class I ozone depleting chemicals is strictly prohibited. Shipping is handled under the First Destination Transportation program as FOB Origin, with delivery to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Payment and invoicing are to be processed electronically through the Wide Area WorkFlow system.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

DOOR, HATCH, VEHICLE

Solicitation # SPE7L1-26-T-17U7

Solicitation SPE7L1-26-T-17U7 is a Request for Quotations issued by the DLA Land and Maritime Land Supply Chain for one vehicle hatch door, identified by NSN 2510-01-289-8823. This requirement supports a Foreign Military Sales case for Taiwan, with delivery scheduled for September 29, 2026, to the General Depot of Naval Supplies in Kaohsiung City. The procurement falls under NAICS 336211 and requires submissions via the DIBBS system by October 8, 2026. Inspection and acceptance will occur at the point of origin. The contract incorporates strict technical and quality requirements from the DLA Master List, including specific packaging standards per MIL-STD-129 and hazardous material labeling per 29 CFR 1910.1200. Due to the nature of the technical data, the item is subject to ITAR or EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification and specific DLA authorizations. Additionally, the award includes a price evaluation preference for certified HUBZone Small Business Concerns and mandates compliance with the Buy American Act and the Berry Amendment. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and a CMMC Level 2 self-assessment for cybersecurity.

LAND SUPPLY CHAIN

POSTED

DEADLINE

PANEL, VEHICULAR OPERAT

Solicitation # SPE7L3-26-T-290X

DLA Land And Maritime is seeking quotes for the procurement of six vehicular operator panels, identified by NSN 2510012948390. This requirement is issued as a Request for Quote under solicitation number SPE7L326T290X, with a delivery requirement of 130 days after receipt of order to DLA Distribution. Interested and responsible sources must submit their quotes electronically by the deadline of October 8, 2026. The procurement falls under NAICS code 336211 and is managed by the Department of Defense office located in Columbus, Ohio. All technical drawings and specifications are available electronically through the provided solicitation links.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

**LES** DIGITAL FORENSICS SPECIALTY VEHICLESThe US Marshals Service within the Department of Justice is forecasting a requirement for LES Digital Forensics Specialty Vehicles. These utility vehicles must be specifically designed and capable of supporting laboratory-grade digital forensic equipment to facilitate specialized field operations. The procurement is categorized under NAICS code 336211 and is designated as Full and Open/Unrestricted. The place of performance for this contract is located in Stevensville, Maryland. Interested parties may coordinate with Mikelle Everett or Small Business Specialist Shandora Acrey for further information.

US Marshals Service

POSTED

DEADLINE

Sander Body With Anti-Ice, Directional, Roll-Off, 3CY & 6CY

Solicitation # 0000039133

The California Department of General Services, Procurement Division, is soliciting bids through an Invitation for Bid (IFB) to establish a mandatory statewide contract for 3 cubic yard and 6 cubic yard sander bodies with anti-ice, directional roll-off capabilities for the California Department of Transportation (Caltrans). The contract term is set for three years, with two optional one-year extensions. The procurement is divided into two groups: Group 1 for 3CY units and Group 2 for 6CY units, with awards made to the responsive and responsible bidder offering the lowest cost per group. All equipment must be new, the latest model in current production, and constructed primarily of stainless steel. Historical data from a previous contract of similar scope indicates a three-year expenditure of approximately $8.47 million. Bidders must adhere to strict submission requirements, using only the State's provided documents, including the Pricing Workbook, Technical Questionnaires for both 3CY and 6CY specifications, and a Narrative Response. Failure to include these mandatory attachments or altering the provided forms may result in bid rejection. While electronic submission via email is the primary method, electronic bid submissions are not allowed for this specific event, and bidders must follow the specific instructions outlined in the solicitation package. The evaluation process includes a three-phase inspection process, beginning with a pre-production model inspection in Sacramento and concluding with a final inspection at the delivery destination. Bidders are also required to provide various certifications, including disclosures regarding Generative AI usage, the Iran Contracting Act, and post-consumer recycled content. A 5 percent bid preference is available for certified small businesses.

DGS - Statewide Procurement

POSTED

DEADLINE

Outfitting for Law Enforcement VehiclesThe Department of the Interior is forecasting a contract for the outfitting of law enforcement vehicles to ensure basic models are equipped for official duties. This scope of work includes the installation of essential equipment such as lights, cameras, safes, and consoles. This opportunity is designated as an 8(a) Sole Source set-aside under NAICS code 336211. The forecast was posted on September 25, 2026, with Wesley Conway and Nikolai Matoka serving as the primary points of contact for the acquisition.

POSTED

DEADLINE

More opportunities from Municipality of Clarington

Same awarding agency

Supply and Deliver Two (2) One-Ton Crew Cab Dump Trucks

Solicitation # CL2026-42

The Municipality of Clarington is soliciting electronic bids for the supply and delivery of two one-ton crew cab dump trucks, with a submission deadline of October 16, 2026, at 2:00 p.m. local time. The scope of work requires the delivery of two units to the Hampton Operations Centre in Ontario, with one of the two units specifically required to include a toolbox headboard. While the technical specifications are modeled after certain custom aluminum and underbody hoist configurations, the municipality is not restricted to specific makes or models. Bidders must provide detailed manufacturer specifications with their submissions and are responsible for arranging equipment demonstrations at the Hampton Operations facility within ten working days if requested. The contract award will be based on compliance with specifications, pricing, references, past performance, and the municipality's previous experience with similar equipment or manufacturers. Although the municipality intends to award the contract to a single bidder, it reserves the right to split the award or reject any tender. Successful vendors must maintain commercial general liability insurance of at least $5 million and automobile insurance of $2 million, and must provide a WSIB clearance certificate. Payment will be issued in full upon successful completion of the project, as no progress payments are permitted. All invoices should be submitted via email to the municipality's designated procurement address.

Heavy Duty Truck Manufacturing

POSTED

about 23 hours ago

DEADLINE

Museum and Archive Protection ServicesThe Museum and Archive Protection Services subcontract involves providing specialized environmental control and protection for sensitive collections within the Municipality of Clarington's public library and museum projects. The selected provider will work with prime contractors to implement preservation measures, protect artifacts, and coordinate relocation activities in strict accordance with museum preservation standards to ensure the safe delivery of protected collections. This opportunity was posted on September 25, 2026, with a response deadline of October 16, 2026. The project falls under NAICS code 541620 and is managed by the Municipality of Clarington.

Environmental Consulting Services

POSTED

DEADLINE

Custom Millwork and Furniture SupplyThis subcontract opportunity with the Municipality of Clarington involves the supply and installation of built-in millwork and system furniture for public library and museum projects. The selected provider will be responsible for the fabrication and installation of custom cabinetry, library shelving, and various furniture systems, working as a subcontractor for prime contractors. The solicitation was posted on September 25, 2026, with a response deadline of October 16, 2026. This project falls under NAICS code 337122 and is managed through the Municipality of Clarington's procurement portal.

Nonupholstered Wood Household Furniture Manufacturing

POSTED

DEADLINE

Ceiling and Lighting InstallationThis subcontract for the Municipality of Clarington involves the installation of ceiling systems and integrated lighting for public library and museum projects. The scope of work requires the contractor to install new ceiling grids, acoustic tiles, and lighting fixtures based on a reconfigured layout to ensure a fully operational lighting system and completed ceiling. The project is categorized under NAICS code 238210. Interested parties must submit their responses by the deadline of October 16, 2026. This opportunity is managed by the Municipality of Clarington and is intended for those acting as subcontractors to prime contractors.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Interior Fit-Out and General CarpentryThis subcontract for Interior Fit-Out and General Carpentry involves the installation of interior partitions and architectural elements for public library and museum projects within the Municipality of Clarington. The scope of work includes the installation of new walls, doors, and interior glazed screens, with a strict requirement that all installations comply with AODA accessibility design and features. The project is managed under NAICS code 236220 and was posted on September 25, 2026. Interested parties must submit their responses by the deadline of October 16, 2026. The primary objective is the delivery of fully completed interior wall and door systems for the prime contractor.

Commercial and Institutional Building Construction

POSTED

DEADLINE

Interior Demolition ServicesThis subcontract for Interior Demolition Services involves performing interior demolition for prime contractors on public library and museum projects for the Municipality of Clarington. The scope of work includes the removal of existing walls, ceilings, doors, and glazed screens to deliver a cleared site ready for reconfiguration. A critical component of the contract is the implementation of strict dust mitigation and noise management protocols to ensure the protection of museum collections and other occupied facilities. The solicitation was posted on September 25, 2026, with a response deadline of October 16, 2026.

POSTED

DEADLINE

CLMA Main Branch Renovation - Prequalification of General Contractors

Solicitation # RFPQ2026-2

The Municipality of Clarington is conducting a prequalification process under solicitation RFPQ2026-2 to identify qualified General Contractors for the comprehensive renovation and modernization of the Clarington Library, Museums and Archives (CLMA) Main Branch in Bowmanville, Ontario. The project, estimated at approximately 1.1 million dollars, aims to enhance accessibility, functionality, and long-term sustainability, with specific requirements for AODA compliance. The scope of work includes demolishing existing layouts and reconfiguring the facility with new walls, lighting, ceilings, and a commercial cafe area. Construction is scheduled to begin on January 6, 2027, with substantial completion targeted for May 3, 2027, and final project completion by May 10, 2027. This procurement is subject to the CFTA, CETA, OQTCA, and the Buy Ontario Act. Prequalification is a two-phase process where proponents must submit their responses via the Municipality's electronic bidding system by October 16, 2026, at 2:00 p.m. local time. To be eligible for the subsequent tender, contractors must achieve a minimum evaluation score of 70 percent and pass a reference check. Required submissions include a CCDC 11 Contractors Qualification Statement, financial stability documentation, and a corporate health and safety policy. The final contract will be based on a CCDC 2 2020 Stipulated Price Contract with supplementary conditions, requiring performance and labour and materials payment bonds each equal to 50 percent of the accepted tender sum.

Commercial and Institutional Building Construction

POSTED

DEADLINE

Facade Condition AssessmentThis subcontract for the Municipality of Clarington involves performing technical inspections and condition assessments of building facades. The selected provider will conduct visual inspections and material degradation tests, specifically targeting spalling and corrosion, using specialized tools such as drones, ultrasonic testing equipment, and lift access. The final deliverables for this engagement include detailed Facade Condition Assessment Reports and maintenance matrices. To qualify for this role, the contractor must hold a P.Eng license and specialized facade inspection certification. The solicitation was posted on September 23, 2026, with a response deadline of October 14, 2026. This opportunity falls under NAICS code 541330 and is designed for those acting as subcontractors for prime contractors on municipal facility projects.

Engineering Services

POSTED

DEADLINE

Moisture Management & Thermal Performance ConsultingThe Moisture Management and Thermal Performance Consulting subcontract for the Municipality of Clarington focuses on analyzing moisture infiltration and improving thermal efficiency for facility projects. The selected consultant will perform hygrothermal analysis, identify sources of water ingress, and recommend specific upgrades for insulation and vapor barriers. Technical execution involves the use of thermal imaging, moisture meters, and blower door testing to deliver comprehensive thermal audits and moisture mitigation plans. To qualify for this role, the provider must hold a Professional Engineering license and a Building Science certification. Interested parties must submit their responses by October 14, 2026, in accordance with the solicitation posted on September 23, 2026.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Roofing Systems SpecialistThe Municipality of Clarington is seeking a Roofing Systems Specialist to provide specialized consulting and design services for facility projects. Acting as a subcontractor to prime contractors, the selected provider will evaluate roof conditions and design new systems for flat, sloped, and specialized municipal roofs. Key responsibilities include specifying materials and utilizing advanced diagnostic tools such as moisture probes and infrared thermography to deliver detailed condition reports, repair schedules, and system specifications. Qualified candidates must hold professional certification in building science or roofing systems. This opportunity was posted on September 23, 2026, with a response deadline of October 14, 2026. The contract falls under NAICS code 541690 and is managed directly by the Municipality of Clarington.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Building Envelope Design & ConsultingThis subcontract for Building Envelope Design and Consulting involves providing specialized design and engineering services for the Municipality of Clarington facility projects. The selected provider will work under prime contractors to design exterior shells that ensure structural integrity and environmental resistance, while developing material specifications and maintaining compliance with building codes and energy standards. Technical requirements include the use of BIM and thermal modeling software, and the provider must hold a P.Eng or Architectural license to deliver the necessary design drawings, technical specifications, and performance reports. The solicitation was posted on September 23, 2026, with a response deadline of October 14, 2026. This opportunity falls under NAICS code 541330 and is managed by the Municipality of Clarington.

Engineering Services

POSTED

DEADLINE

Engineering, Planning and Professional Consulting Services Roster

Solicitation # RFPQ2026-1

The Municipality of Clarington is issuing Request for Pre-Qualifications RFPQ2026-1 to establish a multidisciplinary roster of qualified firms for engineering, planning, and professional consulting services. This specific opportunity focuses on Category 10 for Facilities Building Science Consulting Services, which includes expertise in building envelope design, roofing systems, moisture management, thermal performance, and facade condition assessments. The procurement is subject to CFTA, CETA, and OQTCA trade agreements, as the roster will be used for individual project assignments with values up to 250,000 dollars. Qualified proponents will enter into a Master Agreement for a three-year term, with the Municipality retaining the option for two additional one-year extensions. To qualify for the roster, respondents must meet all mandatory criteria and achieve a minimum technical score of 80 percent based on consultant experience and project references from the last five years. The evaluation process consists of three stages: a mandatory submission review, a technical evaluation, and optional interviews. Once the roster is established, the Municipality will use an invitational second-stage competitive process to assign work to the lowest compliant bidder via Purchase Orders. Proponents must provide proof of Commercial General Liability insurance of at least 5 million dollars and adhere to strict privacy and confidentiality regulations. All responses must be submitted electronically through the Bids and Tenders portal by 2:00 p.m. on October 14, 2026.

Engineering Services

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS