Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Supply and Installation of 20-inch Type-304L Stainless Steel Casing

Active

State & Local

Response Deadline09/01/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the furnish and installation of a 20-inch inner diameter Type-304L stainless steel casing extending from 2 feet above ground level down to 230 feet below the ground surface. This work involves sourcing, transporting, and properly installing corrosion-resistant stainless steel casing to meet stringent material and depth specifications, ensuring durability and structural integrity in subsurface conditions. The casing must be installed in compliance with industry standards for material handling, alignment, and sealing to prevent environmental contamination or structural failure. The solicitation is issued as a subcontract under NAICS code 332311, indicating fabrication of metal structural components, and is managed by the Public Works Department of the City of Newport Beach in California. Responses are due by September 1, 2026, at 5:00 PM, with the opportunity posted on July 29, 2026. No set-aside designation or agency-specific set-aside description is provided, and the place of performance is unspecified, though it is implied to be within the jurisdiction of the issuing agency. Interested parties must submit proposals via the provided online portal prior to the deadline.

General Info

Furnish and install 20-inch Type-304L stainless steel casing to 230 feet depth by September 1, 2026.

Agency

California → Public Works Department of City of Newport BeachView Agency

NAICS

332311 - Prefabricated Metal Building and Component ManufacturingView NAICS

Place of Performance

CA, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 29

subcontract

Response DeadlineSep 1

Submission deadline

Response Deadline

09/01/2026, 05:00:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyCalifornia → Public Works Department of City of Newport Beach

ContactsNo contacts available

OfficeN/A

Organization / Agency

California → Public Works Department of City of Newport Beach

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Furnish and install 20-inch ID Type-304L stainless steel casing from 2 ft above ground to 230 ft below ground surface.

Similar Contracts

Same NAICS industry code

Structural Steel SupplyThe contract involves the supply of fabricated steel members specifically for a rappelling tower and its associated platforms, with all materials requiring a corrosion-resistant coating suitable for exposure to a marine environment. This work is critical to ensure long-term structural integrity and safety in high-salinity, high-humidity conditions typical of coastal or offshore installations. All steel components must be manufactured to precise engineering specifications to meet load-bearing and safety standards for active use in training or operational scenarios. Issued as a subcontract under the Department of Defense through Navfacsyscom Europe Africa Central, the opportunity was posted on July 29, 2026, with a response deadline of August 14, 2026. The North American Industry Classification System code 332311 identifies the scope as structural metal fabrication, indicating the bidder must possess the capability to produce custom steel assemblies from raw materials through final fabrication. The place of performance and specific delivery location are not detailed, but the marine coating requirement implies the final installation will occur in a maritime setting. Contractors are expected to demonstrate experience with defense-related projects and compliance with military-grade surface protection standards without explicit set-aside conditions or subcontracting limitations stated.

Navfacsyscom Europe Africa Central

POSTED

DEADLINE

Climate-Controlled Storage Container (Conex) SupplyThe contract mandates the supply of a new 20-foot climate-controlled storage container constructed from Corten steel, designed for durability and corrosion resistance in outdoor environments. The unit must include marine-grade plywood flooring to withstand heavy use and moisture, a 15,000 BTU PTAC HVAC system to maintain precise temperature and humidity levels, and a fully compliant electrical system meeting all relevant safety and operational standards. The container must be delivered fully assembled and ready for immediate use, with no additional setup or modifications required by the recipient. The procurement is issued under the NAICS code 332311 for fabricated metal product manufacturing and is classified as a subcontract. It is managed by the Department of Veterans Affairs through the 260-NETWORK Contract Office 20, with performance required at the facility located in Boise, Idaho, 83702. The opportunity was posted on July 29, 2026, and responses must be submitted no later than 10:00 PM Eastern Time on August 4, 2026. The contract does not specify a set-aside designation, and the place of performance is fixed at the designated Boise location.

260-NETWORK Contract Office 20 (36C260)

POSTED

DEADLINE

8145--Climate Controlled Storage Conex - Boise VA Medical Center Brand Name or Equal

Solicitation # 36C26026Q0896

The Department of Veterans Affairs, through the NCO20 office, is conducting market research to determine the availability of qualified small businesses, including Service-Disabled Veteran Owned, Veteran Owned, Women Owned, and other Small Business Manufacturers, as well as large businesses, capable of supplying a single 20ft climate-controlled storage container under a firm-fixed price supply contract. The requirement is for a brand name or equal product, specifically a new, one-trip Corten steel container with exact dimensions of 20ft long by 8ft wide and a height no greater than 10ft, featuring heavy-duty neutral exterior paint with a minimum five-year service life, marine-grade wood flooring with forklift tracks, interior LED lighting, GFCI outlets on each interior wall, and 1-inch styrofoam insulation on walls plus two layers on the ceiling. The unit must include a 15,000 BTU PTAC HVAC system with an energy efficiency ratio of 9.5 or higher, a digital thermostat, and a minimum 60A disconnect feeding a 125A interior electrical panel. The container must have a secure steel cargo door on the end opposite the main access door and must be under four years old with no damage. The SBA Non-Manufacturer Rule applies, and no waiver will be sought, meaning only authorized distributors or resellers of the manufacturer can respond if they do not manufacture the product themselves. All items must be new, with no used or refurbished equipment accepted, and the manufacturer must be Falcon Structures unless an equal product is submitted. Responses must include full company details, UEI, SBA certifications if applicable, proof of authorization from the manufacturer if not the producer, a courtesy quote for price reasonableness, and detailed documentation demonstrating that any “equal” product meets or exceeds every specified salient characteristic, including brand name, model number, and supporting literature. The country of origin for all components must be declared, and if the product is foreign-made, respondents must indicate whether it exceeds 60% domestic content, though this is waived for COTS items. Respondents must also identify all manufacturers involved and, if they qualify as a nonmanufacturer under SBA regulations, provide a narrative confirming they meet the criteria of having fewer than 500 employees, primarily engaging in wholesale or retail, taking ownership of the item, and supplying a U.S.-made end product from a small business manufacturer. Participation is voluntary, with no reimbursement for response costs, and submission does not

260-NETWORK Contract Office 20 (36C260)

POSTED

DEADLINE

Buy America-Compliant Material SupplyThe contract requires the supply of domestically manufactured construction materials including steel, asphalt, and concrete for projects funded by the Federal Transit Administration, with full compliance with Buy America regulations. All materials must be produced in the United States to meet federal sourcing mandates, ensuring that the end products contain a high percentage of U.S. content and meet stringent domestic production standards. This is a subcontract opportunity under DAS Procurement in Connecticut, with bids due by August 26, 2026, and the solicitation was posted on July 29, 2026. The NAICS code 332311 identifies the primary industry focus as fabricated metal product manufacturing, aligning with the production of essential construction components. The place of performance and specific project locations are not detailed, but work is expected to support transit infrastructure initiatives within the state. Submission must adhere to federal compliance protocols, and interested parties should access the portal linked in the contract data for formal bid instructions and additional requirements.

DAS Procurement

POSTED

DEADLINE

Modular Radio Communications Shelter Design and FabricationThe contract calls for the design, engineering, and fabrication of a modular radio communications shelter that must be engineered for complete disassembly, efficient palletization, and secure shipping to enable field assembly by Utah National Guard personnel without any vendor support. The shelter must be constructed using standardized components and clear, self-explanatory assembly instructions to ensure operational readiness in austere environments where technical assistance is unavailable. All materials, fasteners, and structural elements must withstand harsh field conditions while maintaining signal integrity and environmental protection for critical communication equipment. The project is classified as a subcontract under NAICS code 332311 and is open for responses until August 5, 2026, with a submission deadline of 9:00 PM local time. The performance location is unspecified but will require the final assembled shelter to be deployed in Utah’s operational areas. The Utah agency, acting through its designated procurement channel, seeks a solution that prioritizes ruggedness, modularity, and ease of field assembly over convenience or cost savings. Bidders must demonstrate experience in military-grade enclosure design and logistics planning for remote deployment, ensuring that every component can be handled by non-specialist personnel using basic tools and following documented procedures.

POSTED

DEADLINE

GJ27-8 UCA Birch Creek Modular Radio Communications Shelter

Solicitation # GJ27-8

The Utah Communications Authority is seeking proposals for the GJ27-8 solicitation titled GJ27-8 UCA Birch Creek Modular Radio Communications Shelter, with questions due by August 2 2026 at 3 PM Mountain Time and responses due by August 5 2026 at 3 PM Mountain Time, both submitted through the U3P platform. Submissions are subject to a strict 1GB file size limit per upload, and vendors must ensure full compliance with all requirements outlined in the official solicitation document, as this procurement is managed solely by the Utah Communications Authority and not by the Division of Purchasing. The contract award will not be published on the public posting site and vendors must contact the designated office directly for award information. The solicitation will be closed upon the deadline but responses will still be evaluated according to the criteria specified in the document. The place of performance is in Utah, and vendors are responsible for reviewing all terms, conditions, and procedures independently to ensure timely and accurate submission.

POSTED

DEADLINE

Material and Equipment Supply (General)The contract is for the supply of certified construction materials and equipment, including structural steel, roofing, and specialty finishes, as outlined in the project specifications. It is structured as a subcontract with a North American Industry Classification System code of 332311, indicating involvement in metal fabrication for building construction. The opportunity was posted on July 28, 2026, and responses are due by September 10, 2026, at 6:00 PM. The Utah agency is managing the solicitation, though specific location details for performance or contact information are not provided. All materials must meet certified standards required for the construction scope, and bidders are expected to comply with all technical and quality assurance stipulations without explicit set-aside provisions outlined.

POSTED

DEADLINE

in about 1 month

Modular Storage Cover Manufacturing & SupplyThe contract calls for the fabrication and delivery of eight modular storage covers engineered to meet rigorous military specifications, ensuring durability, environmental protection, and operational readiness in demanding field conditions. Each unit must comply with all federal logistics standards, including precise packaging requirements to safeguard integrity during transport and storage, and undergo comprehensive quality assurance protocols to verify conformance to technical and performance benchmarks. The work is subject to strict military-grade oversight and must be completed in alignment with the Department of Defense’s logistical and compliance frameworks. Performance is required at Fort Bragg, North Carolina, with all units to be delivered and accepted at this location. The contract is classified as a subcontract under NAICS code 332311, indicating it pertains to metal manufacturing processes relevant to structural components. The solicitation was posted on July 28, 2026, with proposals due by August 10, 2026, and is managed through the Department of Defense’s Defense Logistics Agency procurement system, ensuring adherence to federal acquisition standards and defense supply chain protocols.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

DEADLINE

Precision Metal Fabrication (Subcomponent Supply)The contract involves the supply of precision-fabricated metal components including housings, flanges, and seals intended for integration into a final access cover assembly, with work required to meet strict technical and quality standards. This subcontract is issued under NAICS code 332311 for metal fabrication and is managed by the Department of Defense through the LAND SUPPLY CHAIN organization, with performance designated to take place at NEW CUMBERLAND, PA, ZIP 17070-5002. The solicitation was posted on July 28, 2026, and responses are due by August 13, 2026, with no specific set-aside provisions indicated, leaving eligibility open to all qualified subcontractors. All components must be fabricated to exact dimensional and material specifications to ensure seamless integration into the larger assembly structure.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Manufacture of Vehicle Loading Ramp (MIL-SPEC)The contract calls for the fabrication of one military-specification vehicle loading ramp identified by NSN 3990-01-588-6701, encompassing all aspects of production from engineering design through final finishing, with strict adherence to military technical standards. The scope includes material sourcing, precision welding, and quality control to ensure full compliance with defense requirements, and the ramp must meet the durability, safety, and performance benchmarks mandated for military use. The solicitation, issued under the NAICS code 332311 for Fabricated Metal Product Manufacturing, is structured as a subcontract with a response deadline of August 10, 2026. The place of performance is designated as Tracy, California, with a ZIP code of 95304-5000, indicating where the ramp must be manufactured and potentially tested. The contracting entity is the Department of Defense under the organization title Construction & Equipment Manu & Con, and the opportunity is publicly accessible via the DIBBS system with the referenced UI link. All work must be completed by the stated deadline to be considered for award.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Galvanized Structural Components SupplyThe contract involves the supply of hot-dip galvanized steel components specifically designed for trailer frames and structural elements intended to withstand the corrosive conditions of marine environments. The components must meet stringent corrosion resistance standards to ensure long-term durability and structural integrity under harsh coastal or offshore operating conditions. The solicitation is classified as a subcontract under a total small business set-aside, meaning only small businesses as defined by the SBA are eligible to respond, aligning with FAR 19.5 guidelines. The North American Industry Classification System code 332311 identifies the primary industry as primary metal product manufacturing, indicating the work requires specialized metal fabrication and coating expertise. The contract was posted on July 28, 2026, with a response deadline of August 6, 2026, at 3:00 PM. The acquiring agency is the Office of Acquisition Grants under the Department of the Interior, though specific location details for performance or contact are not provided. All submissions must comply with federal contracting requirements and demonstrate technical capability to deliver galvanized steel components meeting the specified environmental performance criteria. Participation is restricted to small business concerns, and vendors must be registered and active in SAM.gov to be considered for award.

Office Of Acquisiton Grants

POSTED

DEADLINE

Rack-Mounted Enclosure Design and Vibration IsolationThe contract requires the design and fabrication of a specialized 19-inch rack-mounted drawer enclosure to house an optical assembly with stringent engineering demands. The enclosure must incorporate vibration isolation to protect sensitive optical components from mechanical disturbances, and integrated thermal management systems to maintain stable operating temperatures under varied environmental conditions. Precise dimensional compliance is mandatory to ensure seamless integration with existing rack infrastructure and compatibility with surrounding hardware. The project is classified as a subcontract under NAICS code 332311 and is being pursued by the National Institute of Standards and Technology under the Department of Commerce. Performance of the work is required in Boulder, Colorado, with a delivery deadline of August 7, 2026, and all proposals must be submitted by 5:00 PM Mountain Time on that date. The solicitation is open for competitive bidding with no set-aside provisions specified.

Department Of Commerce Nist

POSTED

DEADLINE

More opportunities from California → Public Works Department of City of Newport Beach

Same awarding agency

Prevailing Wage and Labor Compliance ManagementThe contract requires comprehensive administration of payroll and reporting for all on-site labor to ensure full compliance with California Labor Code Sections 1770 et seq., specifically governing prevailing wage requirements on public works projects. This includes accurate calculation and payment of wages, fringe benefits, and overtime in accordance with prevailing rates established by the State of California, as well as the timely and precise submission of certified payroll records and related documentation. The work must be executed in alignment with state regulations to avoid penalties and maintain eligibility for public funding. The contract is structured as a subcontract under the Public Works Department of the City of Newport Beach in California, with a NAICS code of 541211 indicating classification under accounting, tax preparation, bookkeeping, or payroll services. Response submissions are due by September 1, 2026, at 5:00 PM, following a posting date of July 29, 2026. All labor compliance activities must be performed at the project site within California, with no specified location beyond the state boundary. The subcontractor is expected to manage these obligations without direct oversight from the agency, relying on established state guidelines and industry best practices to ensure legal adherence and operational integrity.

Offices of Certified Public Accountants

POSTED

DEADLINE

in about 1 month

Environmental and Regulatory Compliance MonitoringThe contract requires strict adherence to environmental regulations during drilling, casing, and testing operations, ensuring full compliance with the Regional Water Board Basin Plan, Total Maximum Daily Load (TMDL) requirements, and Best Management Practices (BMPs). All activities must be conducted with precision to protect water quality and comply with state and regional environmental standards, with continuous monitoring and documentation to verify adherence throughout the project lifecycle. This is a subcontract under the Public Works Department of the City of Newport Beach in California, posted on July 29, 2026, with a response deadline of September 1, 2026, at 5:00 PM. The work falls under NAICS code 541620, indicating environmental consulting services, and is intended to support regulatory compliance for water resource protection in local operations. The place of performance and point of contact details are unspecified, but the work is expected to occur within the jurisdictional boundaries governed by the Regional Water Board and associated regulatory frameworks.

Environmental Consulting Services

POSTED

DEADLINE

in about 1 month

Well Development and Testing ServicesThe contract calls for comprehensive well development and testing services to evaluate groundwater yield and system efficiency. Activities include surge testing, air lifting, and pump testing, along with step-drawdown and constant-rate tests designed to measure aquifer response and well performance under controlled conditions. The work must be performed in accordance with industry standards to ensure accurate data collection and reliable assessment of well productivity. This is a subcontract issued by the Public Works Department of the City of Newport Beach in California, with a response deadline of September 1, 2026. The services fall under NAICS code 541620, indicating environmental consulting and related technical services. Performance is expected to occur within the jurisdiction of the agency, though specific location details are not provided. Interested parties must submit proposals by the stated deadline to be considered for award.

Environmental Consulting Services

POSTED

DEADLINE

in about 1 month

Supply and Installation of 4-inch Type-304L Stainless Steel Camera TubeThe contract requires the furnish and installation of a 4-inch inner diameter Type-304L stainless steel camera tube totaling 232 linear feet, specifically for use in well inspection and monitoring applications. The material specification ensures corrosion resistance and durability suitable for long-term subterranean or harsh environmental conditions, with the installation scope encompassing proper placement and secure integration into the existing well infrastructure. The work is governed under a subcontract arrangement with a NAICS code of 332913, indicating it falls within the Other Fabricated Metal Product Manufacturing category, typically involving precision fabrication and assembly of custom metal components. The solicitation was posted on July 29, 2026, and responses must be submitted by September 1, 2026, at 5:00 PM. The contracting entity is the Public Works Department of the City of Newport Beach in California, and the place of performance is within the jurisdiction of this agency, though exact site details are not specified. Bidders must be prepared to meet stringent material and installation standards to ensure the camera tube functions reliably in underground monitoring systems, with compliance to industry best practices for stainless steel piping systems assumed as part of the technical requirements. All proposals must be submitted through the designated online portal prior to the deadline.

Plumbing Fixture Fitting and Trim Manufacturing

POSTED

DEADLINE

in about 1 month

Supply and Installation of 2-inch Type-304L Stainless Steel Sounding TubeThe contract calls for the supply and installation of a 2-inch inner diameter Type-304L stainless steel sounding tube, totaling 212 linear feet, to be used for well monitoring purposes. The material specification requires Type-304L stainless steel, known for its corrosion resistance and suitability for long-term subsurface applications, ensuring durability and reliability in environmental monitoring scenarios. The work involves both furnishing the specialized tubing and its proper installation, indicating a turnkey responsibility for the vendor to deliver, handle, and mount the system according to technical and safety standards. Issued as a subcontract under NAICS code 332913, which categorizes metal fabricated product manufacturing, the solicitation is managed by the Public Works Department of the City of Newport Beach in California. The opportunity was posted on July 29, 2026, with a firm deadline for responses set for September 1, 2026, at 5:00 PM. The contract does not specify a set-aside designation, and no point of contact or detailed place of performance information is provided beyond the jurisdictional authority. Interested parties must review the detailed requirements through the provided online portal to ensure full compliance with technical, scheduling, and documentation expectations.

Plumbing Fixture Fitting and Trim Manufacturing

POSTED

DEADLINE

in about 1 month

Well Drilling and Construction – Shallow Well (1,000 GPM)The contract involves drilling and constructing a shallow potable water well to a depth of approximately 230 feet with the goal of achieving a minimum water yield of 1,000 gallons per minute. The scope includes full well development, installation of appropriate casing, and comprehensive testing to verify performance and water quality standards. The work is classified as a subcontract under NAICS code 213111, which pertains to oil and gas well drilling services, though the project is focused on potable water supply. The opportunity is solicited by the Public Works Department of the City of Newport Beach in California, and responses must be submitted by September 1, 2026, at 5:00 PM. The posting date was July 29, 2026, indicating a roughly six-week window for proposal preparation and submission. The place of performance and specific location details are not provided in the data, but the project is intended to serve municipal water needs within Newport Beach.

Drilling Oil and Gas Wells

POSTED

DEADLINE

in about 1 month

Well Drilling and Construction – Deep Well (3,000 GPM)The contract requires the drill and construction of a deep potable water well to a depth of approximately 490 feet using reverse circulation drilling methods. The scope includes installing casing, developing the well, and conducting thorough testing to ensure a minimum yield of 3,000 gallons per minute. This work is critical to meeting municipal water supply needs and must adhere to strict technical standards for depth, yield, and construction integrity. The project is issued as a subcontract under the Public Works Department of the City of Newport Beach in California, with a North American Industry Classification System code of 213111 indicating it falls under drilling and related services for oil and gas, water, and mining. The solicitation was posted on July 29, 2026, and proposals must be submitted no later than September 1, 2026, at 5:00 PM. The place of performance is in Newport Beach, California, though specific site details are not provided in the contract data. Interested parties should review the full solicitation via the provided vendor portal link to access all technical requirements, submission guidelines, and compliance conditions.

Drilling Oil and Gas Wells

POSTED

DEADLINE

in about 1 month

GROUNDWATER DEVELOPMENT PROJECT CONSTRUCTION OF THE BUSHARD STREET WATER WELLS

Solicitation # 10001-2

The City of Newport Beach is soliciting bids for the construction of two new potable water supply wells—the Bushard Deep Well and the Bushard Shallow Well—at 17902 Bushard Street in Fountain Valley, California. The project aims to enhance the city’s municipal drinking water supply by tapping into underlying aquifer systems, with targeted production rates of 3,000 gallons per minute for the deep well and 1,000 gallons per minute for the shallow well, contingent on aquifer availability. All construction specifications and technical parameters are detailed in the accompanying Technical Specifications and Special Provisions, while the precise site boundaries and well locations are outlined in Exhibit A, Figure A1. Bidders must submit an original sealed bid bond equal to ten percent of their bid amount to the City Clerk prior to the bid opening date, and all responses must be submitted electronically; hard copies will not be accepted. The City assumes no responsibility for delays or errors caused by technical failures, printing inaccuracies, or failure to submit complete electronic documents. The solicitation, identified as 10001-2, was posted on July 29, 2026, with a mandatory submission deadline of September 1, 2026, at 5:00 PM. Electronic versions of the plans, specifications, and bid documents are available for download, and bidders are cautioned that any errors resulting from printing or incomplete submissions are their sole responsibility. Bid results will be made publicly available immediately after the bid opening through PlanetBids, and members of the public may attend the reading at the City Clerk’s Office located at 100 Civic Center Drive, Newport Beach, California. The primary point of contact for inquiries is Ben Davis of the Public Works Department, reachable by phone or email.

Water and Sewer Line and Related Structures Construction

POSTED

DEADLINE

in about 1 month