Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Supply and Integration of Mapping Guidance Yield Monitor System

Active

Federal

Response Deadline08/14/2026, 04:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the procurement, configuration, and delivery of a fully functional Mapping Guidance Yield Monitor System designed for agricultural research applications, with all technical specifications must be met or exceeded. The contractor is fully responsible for integrating the system components, ensuring compliance with all applicable standards, and delivering a turnkey solution ready for immediate use in the field. The system must support precise data collection and guidance capabilities critical to research objectives in precision agriculture. This subcontract is designated as a Small Business Set Aside under NAICS code 334510, with the place of performance located in Akron, Colorado, 80720. The solicitation was posted on July 31, 2026, and responses are due by August 14, 2026, at 4:00 PM. The contracting entity is the USDA Agricultural Research Service, Agricultural Field Management and Analysis Program Division, and while no specific point of contact is listed, all submissions must adhere to the technical and compliance requirements outlined for the system to qualify for award.

General Info

Procure and deliver turnkey mapping yield monitor system for precision agriculture research in Akron, Colorado, by August 14, 2026.

Agency

Department Of Agriculture → USDA Ars Afm ApdView Agency

NAICS

334510 - Electromedical and Electrotherapeutic Apparatus ManufacturingView NAICS

Place of Performance

Akron, CO, 80720, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 31

subcontract

Response DeadlineAug 14

Submission deadline

Response Deadline

08/14/2026, 04:00:00 PM UTCin 13 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Agriculture → USDA Ars Afm Apd

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Agriculture → USDA Ars Afm Apd

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Procure, configure, and deliver a fully functional Mapping Guidance Yield Monitor System that meets or exceeds technical specifications for agricultural research use. Contractor is responsible for system integration, compliance, and delivery.

Similar Contracts

Same NAICS industry code

6515--Observsmart Patient Safety Monitoring System

Solicitation # 36C25626Q1150

The Department of Veterans Affairs intends to award a sole source Firm-Fixed Price contract to Invisalert Solutions Inc. for the Observsmart Patient Safety Monitoring System to be deployed at the Michael E. DeBakey VA Medical Center in Houston, Texas. This procurement is based on the determination that the system is highly specialized, available only from the original manufacturer, and no other product or service will meet the agency's requirements. The contract would have a one-year base period with three one-year option periods, with an anticipated award date of September 1, 2026. The acquisition is justified under 41 U.S.C. §3304(a)(1) and FAR 6.302-1 due to the absence of alternative sources. The North American Industry Classification System code is 334510 with a small business size standard of 1,250 employees. This posting serves solely as a pre-solicitation notice and request for information, not as a solicitation or invitation for competitive bids. Interested parties may submit capability documentation by August 6, 2026, to help the government determine whether to proceed with a sole source award or initiate a competitive procurement. Responses must be submitted via email in Microsoft Word or Adobe Acrobat format, not exceed 8.5 x 11 inches with 12-point font and one-inch margins, and must demonstrate the respondent’s technical experience and ability to meet the requirements. All submissions must include clear and convincing evidence of capability, be virus-checked, and originate from a SAM-registered entity. No solicitation currently exists, and the government will not reimburse any costs incurred in responding. Information provided will be used exclusively to evaluate the need for competition, and the final decision to proceed without competition rests solely with the VA.

256-NETWORK Contract Office 16 (36C256)

POSTED

about 9 hours ago

DEADLINE

Supply of Crime-Lite Auto Kits for Forensic Evidence DetectionThe contract solicits the supply of two fully integrated Crime-Lite Auto Kits equipped with UV and IR imaging capabilities, specifically designed for forensic applications in the detection of biological fluids, fingerprints, and trace evidence. These kits are essential tools for crime scene investigators, enabling non-destructive, high-precision visualization of latent evidence that is otherwise invisible under standard lighting conditions. The equipment must be fully functional, calibrated, and ready for immediate deployment upon delivery, ensuring seamless integration into existing forensic workflows. The procurement is classified as a subcontract under NAICS code 334510, which pertains to the manufacturing of electronic and imaging equipment. The opportunity was posted on July 31, 2026, with a response deadline of August 21, 2026, and is managed by the Department of Law Enforcement in Florida. While specific delivery locations and point of contact details are not provided, the place of performance is expected to align with Florida law enforcement operations. Vendors must ensure full compliance with technical specifications for UV and IR imaging performance, durability under field conditions, and compatibility with forensic documentation systems.

Department of Law Enforcement

POSTED

about 24 hours ago

DEADLINE

Trade-In and Buy-Back Program AdministrationThe contract seeks a subcontractor to manage the end-of-life logistics for outdated automated external defibrillators from manufacturers including Zoll, Philips, and CardioOne. Responsibilities encompass the full lifecycle of trade-in and buy-back processes, starting with accurate valuation of units based on condition and model, followed by secure transportation to certified handling facilities. All activities must adhere to strict regulatory standards for medical device disposal and refurbishment, ensuring data sanitization, environmental compliance, and chain-of-custody documentation throughout the process. The subcontractor must demonstrate expertise in handling sensitive medical equipment and maintaining compliance with state and federal guidelines for healthcare waste and electronic device recycling. This opportunity is issued under the NAICS code 334510 for medical and surgical equipment manufacturing and is administered by the Richmond County Board of Education in Georgia. The solicitation was posted on July 31, 2026, with a response deadline of September 2, 2026. While no set-aside designation is specified, the contract is structured as a subcontract and requires proposers to show proven capability in logistics coordination, equipment assessment, and regulatory adherence. The place of performance and point of contact details are not provided, but operations are expected to serve the agency’s statewide needs, with all activities centered on the responsible management of obsolete AEDs.

Richmond County Board of Education

POSTED

DEADLINE

in about 1 month

Portable Electronic Signage (Arrow Boards & Variable Message Boards)The contract encompasses the rental, supply, and ongoing maintenance of portable electronic signage including arrow boards and variable message signs, specifically for use in dynamic traffic control during lane closures and detours. These devices are essential for guiding motorists safely through work zones and are required to meet operational standards for visibility, durability, and reliability under varying environmental conditions. The services must ensure continuous availability and prompt response to equipment failures or deployment needs, supporting safe and efficient traffic management throughout the contract period. This is a subcontract under the NAICS code 334510, issued by FAS - Purchasing through the Washington office, with a response deadline of September 14, 2026. Performance is expected to support traffic control operations in unspecified locations under the agency's jurisdiction, requiring vendors to supply, deploy, service, and retrieve signage as needed. While specific geographic details and point of contact information are not provided, the scope emphasizes technical compliance, timely service, and consistent equipment readiness to meet the operational demands of traffic management initiatives.

FAS - Purchasing

POSTED

DEADLINE

in about 1 month

Wireless Medical Ultrasound Scanner SupplyThe contract is for the supply of seven L7 HD3 Wireless Scanners designed for point-of-care diagnostic applications, intended for use in clinical settings requiring portable and reliable ultrasound technology. It is classified as a subcontract under a Small Business Set Aside program, specifically reserved entirely for small businesses, with the NAICS code 334510 indicating the manufacturing of medical, dental, and hospital equipment. The solicitation was posted on July 31, 2026, with responses due by August 6, 2026, and the performance location is designated with a zip code of 79930, suggesting delivery to a facility within that geographic area. The contracting entity is the Department of Veterans Affairs through its 257-NETWORK Contract Office 17, indicating the scanners will support veteran healthcare services. While no specific point of contact or full address details are provided, the contract remains active under federal procurement guidelines and is accessible via the SAM.gov platform.

257-NETWORK Contract Office 17 (36C257)

POSTED

DEADLINE

Domestic Manufacturing and Supply Chain ComplianceThe contract requires that the final assembly or manufacturing of the system be conducted within the United States or Free Trade Agreement countries to comply with Buy American requirements. All components used in the system must have their country of origin meticulously documented and maintained to ensure full compliance with federal sourcing regulations. This obligation extends throughout the supply chain, mandating transparent and auditable records for every part and material incorporated into the final product. The contract is a subcontract classified under a Small Business Set Aside for total award and falls under NAICS code 334510, which pertains to electronic instrument manufacturing. It is issued by the USDA ARS AFM APD, with the place of performance located in Akron, Colorado, with a zip code of 80720. The solicitation was posted on July 31, 2026, and responses are due by August 14, 2026, by 4:00 PM. Successful bidders must demonstrate both the capability to meet domestic manufacturing requirements and the systems in place to properly track and report component origins.

USDA Ars Afm Apd

POSTED

DEADLINE

Medical Equipment Installation and IntegrationThe contract encompasses the full installation and commissioning of advanced medical imaging systems, exam room equipment, sterile processing units, and medical gas systems specifically tailored for outpatient care facilities under the Department of Veterans Affairs. This subcontract, classified under NAICS code 334510, requires comprehensive integration of critical healthcare infrastructure to ensure operational readiness, compliance with medical standards, and seamless functionality within clinical environments. The work must be performed to support the Office of Construction & Facilities Management’s mission to provide safe, efficient, and modern outpatient care services. All proposed solutions must be submitted by the deadline of September 11, 2026, with performance expected to meet stringent technical and safety requirements for medical equipment deployment. Although specific locations are not detailed, the scope implies nationwide deployment across VA outpatient sites, demanding adherence to federal healthcare facility guidelines and coordination with existing systems. The contractor will be responsible for end-to-end delivery, including site preparation, equipment setup, calibration, testing, training, and commissioning to ensure uninterrupted clinical operations upon handover.

Office Of Construction & Facilities Management (36C10F)

POSTED

DEADLINE

in about 1 month

Surgical Lighting System SupplyThe contract calls for the supply of a high-performance surgical lighting system featuring a fully cardanic-suspended design, engineered to meet the demanding standards of laminar flow operating rooms. The lighting unit must include a minimum of 36 LEDs capable of delivering at least 160,000 lux of illuminance, ensuring optimal visibility during critical procedures. A key requirement is the inclusion of a sterilizable handle to facilitate infection control protocols, allowing for safe and seamless integration into sterile surgical environments without compromising hygiene or functionality. This subcontract is solicited by the Department of Veterans Affairs through the 241-NETWORK Contract Office 01, with performance required at the facility located in West Roxbury, Massachusetts, ZIP code 02132. The opportunity was posted on July 31, 2026, and responses must be submitted by August 15, 2026, at 8:30 PM Eastern Time. The North American Industry Classification System code 334510 indicates this procurement pertains to medical and dental equipment and supplies manufacturing, and the contract is designated as a subcontract without a specific set-aside classification. All submissions must comply with technical specifications and delivery timelines to ensure compatibility with the high-acuity surgical operations conducted at the site.

241-NETWORK Contract Office 01 (36C241)

POSTED

DEADLINE

Transcranial Magnetic Stimulation (TMS) System SupplyThe contract involves the supply of a Magstim Super Rapid 2 Plus 1 Magnetic Stimulator system, which includes compatible coils, an EMG interface module, and a portability cart, designed for use in transcranial magnetic stimulation (TMS) applications. The system is configured to interface with EEG recording equipment and supports motor threshold identification, ensuring precise and reliable neuromodulation procedures for clinical or research settings. The equipment must meet technical specifications to ensure full compatibility with existing neurophysiological monitoring systems and deliver consistent performance under varied operational conditions. The contract is classified as a subcontract under NAICS code 334510, issued by the National Institutes of Health under the Department of Health and Human Services, with a response deadline of August 10, 2026. The award will include manufacturer-backed warranty coverage for the full system, ensuring ongoing support and calibration integrity. The equipment will be delivered to a designated location within the United States, though the precise place of performance is unspecified. All components must be fully functional upon delivery, with documentation confirming operational compatibility, safety certifications, and serviceability.

National Institutes Of Health Olao

POSTED

DEADLINE

High-Density EEG System Supply and IntegrationThe contract seeks the supply and integration of a high-density EEG system comprising a 256-channel HD-EEG amplifier, five EEG caps, associated accessories, a mobile cart, and an articulating arm designed for research applications involving both pediatric and adult participants. The system must be fully compatible with an existing TMS-EEG platform to enable synchronized transcranial magnetic stimulation and electroencephalography data acquisition. All components must meet rigorous technical specifications for signal fidelity, patient comfort, and clinical-grade performance in a research environment. The equipment must be delivered, installed, and validated to ensure seamless operational integration with existing laboratory infrastructure and software workflows. The contract is structured as a subcontract under the National Institutes of Health, part of the U.S. Department of Health and Human Services, and falls under NAICS code 334510 for medical and surgical equipment manufacturing. The solicitation was posted on July 31, 2026, with a response deadline of August 10, 2026. No set-aside provisions are specified, and the place of performance and contracting office details are not provided. The successful vendor will be expected to provide full technical support, training, and documentation to ensure proper use and maintenance of the system by research personnel.

National Institutes Of Health Olao

POSTED

DEADLINE

Portable Audiometer Supply and ManufacturingThe contract calls for the manufacture and supply of FDA-cleared, U.S.-made portable audiometers designed for clinical use within Department of Veterans Affairs facilities. These devices must fully comply with ANSI S3.6 and IEC 60645 standards to ensure accurate and reliable audiometric testing in veteran healthcare settings. The equipment is intended for deployment at the designated place of performance in San Antonio, Texas, with delivery and installation requirements expected to align with VA clinical workflows and regulatory compliance norms. Manufacturing must occur domestically to satisfy U.S.-made sourcing mandates and ensure supply chain integrity. This is a small business set-aside subcontract under NAICS code 334510, reserved exclusively for small business concerns as defined by the SBA. The opportunity was posted on July 31, 2026, with proposals due by August 13, 2026, and is managed by the 257-NETWORK Contract Office 17 under the Department of Veterans Affairs. The vendor must demonstrate capacity for consistent, high-volume production of certified devices, adherence to quality control protocols, and the ability to support ongoing maintenance, calibration, and technical service for the life of the contract. All submissions must reflect full compliance with federal procurement regulations and VA-specific requirements for medical device procurement.

257-NETWORK Contract Office 17 (36C257)

POSTED

DEADLINE

Femtosecond laser system with two synchronized outputs

Solicitation # BZ-2026-05

The Lawrence Berkeley National Laboratory, under the U.S. Department of Energy, is seeking a femtosecond laser system with two synchronized outputs to support advanced remote sensing research. The system must enable femtosecond laser filamentation for applications including isotope sensing through remote plasma generation, air-lasing techniques using dual-color synchronized beams, spatially and temporally shaped free-standing plasma channels for electromagnetic spectrum manipulation, and high-energy beam studies of filament-filament interactions. The procurement is designed to accommodate multiple experimental configurations requiring precise temporal and spatial control of ultrafast laser pulses and their synchronized pair. The solicitation, identified as BZ-2026-05, was posted on July 31, 2026, with responses due by August 10, 2026, and is classified as a sources-sought notice under NAICS code 334510. There is no set-aside designation, and all interested parties may respond. The performance location is Berkeley, California, and inquiries should be directed to Brian Zatkow at the provided contact information. The full technical requirements and submission instructions are detailed in the attached RFI document.

Berkeley National Labor - DOE Contractor

POSTED

DEADLINE

More opportunities from Department Of Agriculture → USDA Ars Afm Apd

Same awarding agency

Small Business Prime Contractor (Set-Aside Opportunity)The contract is a small business set-aside opportunity under the SBA program, requiring the prime contractor to deliver the complete Mapping Guidance Yield Monitor System. All aspects of the project, including system design, pricing, regulatory compliance, and potential subcontractor management, must be handled by the prime contractor, who must qualify as a small business as defined by the SBA. The NAICS code 333111 indicates the scope relates to agricultural, construction, and mining machinery manufacturing, underscoring the technical and industrial nature of the system being procured. Performance is required in Akron with a ZIP code of 80720, and the solicitation is set to close on August 14, 2026, with a posted date of July 31, 2026. The contracting office is under the USDA ARS AFM APD, part of the Department of Agriculture, and the type of contract is designated as a subcontract, despite the prime contractor being responsible for full system delivery. There is no listed point of contact or detailed address beyond the place of performance, so potential bidders must rely on the provided UI link and the requirements outlined in the full solicitation. Compliance with small business set-aside rules is mandatory, and failure to meet these criteria will disqualify otherwise responsive offers.

Farm Machinery and Equipment Manufacturing

POSTED

DEADLINE

Technical Documentation and Compliance SupportThe contract for Technical Documentation and Compliance Support requires the preparation and validation of technical documentation including datasheets, brochures, and specification sheets to demonstrate that the offered system fully meets or exceeds the government requirements outlined in Attachment 2. This effort is critical to proving compliance with federal standards and ensuring the system’s suitability for the intended purposes under the USDA ARS AFM APD program. The work must be executed with precision to align all deliverables with the technical specifications and compliance criteria defined by the government. This is a Small Business Set Aside subcontract under NAICS code 541330, exclusively available to small businesses, with a response deadline of August 14, 2026, at 4:00 PM. The place of performance is specified as Akron, with a zip code of 80720. Solicitation was posted on July 31, 2026, and the work is intended to support federal procurement compliance through accurate, comprehensive, and verified technical documentation. All deliverables must be completed and submitted by the deadline, with no flexibility for extensions, and must be capable of withstanding government review and validation processes.

Engineering Services

POSTED

DEADLINE

Progress Certification and Contract Administration SupportThe contract requires the preparation and submission of progress payment certifications, including the use of Form ARS-371, to ensure accurate and timely payment processing in accordance with federal contract standards. It involves closely monitoring work completion to verify that deliverables align with contractual obligations and maintaining full compliance with federal documentation requirements for audits and reporting. This subcontract is designated as a Small Business Set Aside under NAICS code 541990, meaning only eligible small businesses can compete, and it is being managed by the USDA ARS AFM APD with performance taking place in Tallahassee, Florida. Bidders must respond by August 13, 2026, with all tasks centered on administrative support to ensure regulatory adherence and efficient contract execution.

All Other Professional, Scientific, and Technical Services

POSTED

DEADLINE

Supply of Mini-Split HVAC Units (Equipment Only)The contract requires the supply and delivery of four mini-split HVAC units that must fully comply with USDA Agricultural Research Service specifications, to be delivered to a site in Tallahassee, Florida, with a zip code of 32308. The requirement is strictly for equipment only, with no installation or additional services included. The opportunity is designated as a Small Business Set Aside under the NAICS code 423610, indicating that only qualified small businesses are eligible to bid. The solicitation was posted on July 31, 2026, and all proposals must be submitted by 7:00 PM Eastern Time on August 13, 2026. The contract is structured as a subcontract under the U.S. Department of Agriculture, specifically managed by the Agricultural Research Service. All bids must meet the technical and compliance standards outlined by the USDA ARS to ensure suitability for use in their facilities.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

DEADLINE

Electrical Wiring and Circuit Installation for HVAC UnitsThe contract requires the installation of dedicated electrical circuits, conduit, breakers, and final connections for four mini-split HVAC systems, all in full compliance with the National Electrical Code standards. Work must be performed at the designated location in Tallahassee, Florida, with zip code 32308, and includes all necessary materials and labor to ensure safe, code-compliant operation of the systems. The project is structured as a subcontract under a Small Business Set Aside, meaning only eligible small businesses may bid, and it falls under NAICS code 238210, which corresponds to electrical contracting services. The opportunity was posted on July 31, 2026, with a response deadline of August 13, 2026, at 7:00 PM. The contracting entity is the USDA Agricultural Research Service, specifically the Agricultural Management and Planning Division, operating under the Department of Agriculture. Although no point of contact is listed, all submissions must be made through the provided SAM.gov link to be considered. Performance is expected to meet all technical, safety, and regulatory requirements without deviation, and bidders must demonstrate capability in residential or light commercial electrical installations for HVAC systems.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Mini-Split HVAC System InstallationThe contract requires the complete installation of four mini-split HVAC systems in trailers, encompassing all aspects of the process including unit mounting, refrigerant line routing and connection, electrical wiring, system vacuuming, refrigerant charging, and final performance testing to ensure proper operation. All work must be performed in compliance with industry standards and manufacturer specifications to guarantee system efficiency and reliability in the designated trailers located in Tallahassee, Florida, with a zip code of 32308. This is a Small Business Set Aside subcontract under NAICS code 238220, reserved exclusively for small businesses, and is issued by the USDA ARS AFM APD under the Department of Agriculture. The solicitation was posted on July 31, 2026, with a mandatory response deadline of August 13, 2026, at 7:00 PM Eastern Time. Bidders must be prepared to deliver fully functional, tested systems at the specified location, and all activities must be completed in accordance with the terms outlined in the subcontract agreement, with no additional details provided regarding payment, duration, or performance metrics beyond the scope of work and location.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Sample Shipping and Handling (Cryogenic Transport)The contract is for the transport of frozen biological samples, DNA, and libraries requiring strict cold-chain integrity under FOB Destination terms, ensuring the responsibility for goods and associated costs transfers to the recipient upon arrival at the specified location in Kearneysville, West Virginia, with ZIP code 25430. The work falls under NAICS code 484220, which categorizes it as a specialized freight trucking service, and it is designated as a Small Business Set Aside under the SBA program, meaning only eligible small business concerns may bid. The contract is structured as a subcontract and was posted on July 31, 2026, with a response deadline of August 14, 2026, at 2:00 PM. The performing organization is the USDA ARS AFM APD, indicating this work supports agricultural research activities requiring precise handling of sensitive biological materials through cryogenic shipping protocols.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Illumina NovaSeq X Whole-Genome SequencingThe contract requires the performance of high-throughput whole-genome sequencing using the Illumina NovaSeq X platform or an equivalent system, targeting a large-scale genomic analysis effort. It is classified as a subcontract under a Small Business Set Aside, designated for small businesses, with the NAICS code 541690 aligning it with other scientific research and development services. The work must be performed at the designated place of performance in Kearneysville, West Virginia, with a zip code of 25430, though no specific office address or point of contact is provided in the details. The solicitation was posted on July 31, 2026, and responses are due by August 14, 2026, giving potential bidders a two-week window to submit proposals. The contracting entity is the USDA ARS AFM APD, indicating this effort supports agricultural research objectives through advanced genomic technologies.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Dovetail Hi-C Library ConstructionThe contract pertains to the construction of Hi-C libraries using Dovetail protocols for the purpose of 3D genome scaffolding and chromatin interaction mapping, a critical technique in genomic research to understand spatial organization within the nucleus. The work is to be performed under a subcontract classified as a Small Business Set Aside, ensuring eligibility and preference for small businesses, and falls under NAICS code 541690, which covers other scientific and technical consulting services. The solicitation was posted on July 31, 2026, with a response deadline of August 14, 2026, at 2:00 PM, indicating a limited window for submissions from interested small business contractors. Performance is to take place in Kearneysville, West Virginia, with a ZIP code of 25430, and the contracting agency is the USDA Agricultural Research Service, specifically under the Agency for Molecular and Personalized Diagnostics. This effort supports advanced genomic research initiatives and requires precise adherence to Dovetail’s proprietary Hi-C library preparation methods to generate high-resolution chromatin interaction data.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Unamplified Illumina Fragment Library PreparationThe contract seeks specialized laboratory services to prepare unamplified fragment libraries for short-read sequencing on Illumina platforms, with a strict focus on minimizing technical bias to ensure high-fidelity genomic data. This work is critical for applications requiring unbiased representation of nucleic acid samples, and the vendor must demonstrate expertise in library preparation protocols that avoid amplification steps known to introduce distortions in sequence composition. The project demands precision and adherence to standardized workflows compatible with Illumina sequencing technologies, ensuring outcomes are suitable for downstream genomic analysis without artifact interference. This subcontract is designated as a Small Business Set Aside under NAICS code 541690, indicating it is reserved for eligible small businesses. The opportunity was posted on July 31, 2026, with a response deadline of August 14, 2026, and the performance location is in Kearneysville, West Virginia, with a zip code of 25430. The contracting entity is the USDA ARS AFM APD, part of the Department of Agriculture, which intends to leverage the prepared libraries for research initiatives requiring high-quality, unbiased sequencing data. All submissions must align with the technical requirements specified, and qualified small businesses are encouraged to respond within the timeline provided.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

PacBio CCSExpress Library Preparation and Revio SequencingThis contract requires the preparation of PacBio CCSExpress libraries and the performance of long-read sequencing using the PacBio Revio platform or an equivalent system, with all work to be performed at Kearneysville, West Virginia, ZIP code 25430. The effort is classified as a subcontract under a Small Business Set Aside - Total, meaning only small businesses are eligible to compete, and the North American Industry Classification System code is 541690, which pertains to other scientific and technical consulting services. The opportunity was posted on July 31, 2026, with a response deadline of August 14, 2026, at 2:00 PM Eastern Time. The awarding agency is the USDA Agricultural Research Service, specifically the Appalachian Fruit Research Station, though no point of contact is provided in the documentation. All deliverables must meet the technical specifications for CCSExpress library preparation, which involves generating highly accurate long-read sequencing data through circular consensus sequencing, and must be completed using either the PacBio Revio system or another platform deemed functionally equivalent by the contracting entity. The work is not subject to a specific delivery schedule beyond the proposal deadline, but the performance location is fixed and no alternative sites are permitted. Interested small businesses must submit their responses by the stated deadline to be considered, and failure to comply with the set-aside requirements or provide evidence of small business status will result in disqualification. The contract is part of a broader USDA research initiative aimed at advancing genomic technologies, and the resulting data will support agricultural and biological research activities under the auspices of the agency.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE