This Government Contract opportunity from Texas was posted on October 17, 2025. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Supply of Adhesive Films or Protective Coatings

Closed

State & Local

Submission Closed10/28/2025, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 325520

New

DIBBS

Specialized Cold-Chain Adhesive SupplyThis subcontract, managed by the Department of Defense DLA DIST OKC KO CP, involves the procurement and delivery of one 450 square foot roll of red adhesive, identified by NSN 8040012952922 and part numbers 3M 41-6104-1794-2/Z1334 or AF-163-2. The contract is designated under NAICS code 325520 and requires delivery FOB Destination to Tinker AFB. Strict logistical requirements are mandated to maintain product integrity, requiring ultra-low temperature storage and refrigerated transport kept at or below 0 degrees Fahrenheit. All shipments must adhere to MIL-STD-2073-1E and MIL-STD-129 packaging standards, with safety data sheets provided in accordance with 29 CFR 1910.1200.

POSTED

DEADLINE

Solicitation # SPE8ES-27-T-0270

Solicitation SPE8ES-27-T-0270 is a small business set-aside for the procurement of one roll of red adhesive, identified as a critical application item with NSN 8040012952922. The required material is a 450 square foot roll measuring 36 inches in width and 50 yards in length, with a thickness of 0.0095 inches and a weight of 0.060 PSF. The item is associated with 3M Company part numbers 41-6104-1794-2/Z1334 and AF-163-2. It is a Type 2 Code 4 item with an extendable 12-month shelf life, and it requires strict temperature control, specifically storage and shipment at or below 0 degrees Fahrenheit. The contract mandates rigorous packaging and safety standards, including compliance with MIL-STD-2073-1E and MIL-STD-129. Due to the hazardous nature of the material, suppliers must provide Safety Data Sheets and labels conforming to 29 CFR 1910.1200. Delivery is set as FOB Destination with inspection and acceptance occurring at the destination. Administrative requirements include electronic invoicing through the Wide Area WorkFlow system and adherence to various DFARS and FAR clauses regarding cybersecurity, domestic material restrictions, and the Buy American Act. All quotes must be submitted via the DLA Internet Bid Board System.

POSTED

DEADLINE

Solicitation # SPE8ES-27-T-0271

Solicitation SPE8ES-27-T-0271, issued by the Defense Logistics Agency (DLA) Troop Support Construction and Equipment office, is for the procurement of adhesive identified by NSN 8040-01-579-5107. The requirement consists of two units, each configured as a mini 6-pack containing six 1-gram packages. The items are subject to a non-extendable shelf life of six months and must be stored between 60°F and 80°F. Delivery is required within 20 days after order, with shipping terms set as FOB Destination to the Surface Combat Systems Training Command in San Diego, California. The contract mandates strict adherence to hazardous materials regulations, requiring the submission of Safety Data Sheets (SDS) and labeling in accordance with 29 CFR 1910.1200 and Federal Standard No. 313-E. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, specifically requiring the inclusion of lot or batch numbers and conspicuous storage temperature markings. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for electronic invoicing and payment. The solicitation is subject to various federal regulations, including the Buy American Act, DFARS cybersecurity reporting standards, and specific prohibitions on covered defense telecommunications equipment.

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # SPE8ES-27-T-0236

Solicitation SPE8ES-27-T-0236 is a procurement request by the Defense Logistics Agency Troop Support for 12 kits of yellow adhesive, identified by NSN 8040-01-268-5916 and part number MERECO XL-389T. The adhesive is a critical application item consisting of an 8 oz base clear part and an 8 oz activator, totaling one pint per kit. The requirement specifies a non-extendable shelf life of six months and requires storage temperatures at or below 77 degrees Fahrenheit. Delivery is required within 20 days of award, with a final required delivery date of October 30, 2026, shipped FOB Destination to the Marine Aviation Logistics SQ 26 in Jacksonville, North Carolina. The contract mandates strict adherence to hazardous material regulations, requiring the submission of Safety Data Sheets and labels consistent with 29 CFR 1910.1200 and Federal Standard No. 313-E prior to award. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements RP001 and IP025. Administrative requirements include the use of Wide Area WorkFlow for invoicing and compliance with the Buy American Act and DFARS cybersecurity reporting standards. Inspection and acceptance will occur at the destination per FAR 52.246-1. All quotes must be submitted via the DIBBS portal by November 4, 2026.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Gray Adhesive (NSN 8040-00-159-5021)This subcontract, issued by the Department of Defense through DLA DIST OKC KO CP, involves the supply of industrial gray adhesive identified by NSN 8040-00-159-5021. The requirement is for the delivery of one quart can of adhesive that strictly adheres to Type I (Code G) specifications, which include a non-extendable shelf life of nine months. Performance for this contract will take place at Tinker AFB. Prospective providers must maintain current SAM representations and certifications to be eligible. The solicitation was posted on November 3, 2026, with a response deadline of November 9, 2026. The procurement falls under NAICS code 325520 and is intended for prime contractors supporting Department of Defense supply contracts.

POSTED

DEADLINE

Solicitation # SPE8ES-27-T-0260

Solicitation SPE8ES-27-T-0260 is for the procurement of one quart of gray adhesive, identified by NSN 8040-00-159-5021. The item is classified as a Type I (Code G) material with a non-extendable shelf life of nine months. Due to its hazardous nature, the supplier must submit Safety Data Sheets and Hazard Communication Standard labels for approval prior to award. The adhesive requires specific environmental controls, including storage at or below 40 degrees Fahrenheit, away from sunlight, and in original unopened containers, though shipment may occur at ambient temperatures. The contract specifies delivery to Tinker AFB, Oklahoma, with a required delivery date of November 5, 2026, and a delivery window of five days after receipt of order. Inspection and acceptance will take place at the destination per FAR 52.246-1. Packaging and marking must comply with MIL-STD-129, MIL-STD-2073-1E, and DLA packaging requirements. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with various DFARS clauses regarding cybersecurity, the Buy American Act, and the prohibition of hexavalent chromium. Quotations are due by November 9, 2026.

POSTED

DEADLINE

Solicitation # SPE8ES-27-T-0217

Solicitation SPE8ES-27-T-0217 is a Request for Quotations issued by the Defense Logistics Agency Troop Support Construction and Equipment for the procurement of one pint of adhesive primer, identified by NSN 8040-01-644-9395 and part number PR-1861. The item is classified as a Type I Code F material with a non-extendable shelf life of six months. Delivery is required within five days after receipt of order to a destination in Fort Campbell, Kentucky, with shipping and storage temperatures strictly maintained between 60 and 80 degrees Fahrenheit. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, including specific hazardous material labeling per the Hazard Communication Standard. Inspection and acceptance will occur at the destination. Administrative requirements include electronic invoicing through the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses regarding equal opportunity, combating trafficking in persons, and the safeguarding of covered defense information. Quotations must be submitted via the DLA Internet Bid Board System.

Defense Logistics Agency

POSTED

DEADLINE

RESIN COATING, THERMOSE

Solicitation # SPE8ES-27-T-0265

This procurement, issued by the Defense Logistics Agency Troop Support, is a request for quotations for thermosetting resin coating, specifically NSN 8030-01-620-1811. The requirement consists of two line items totaling four units, with delivery required within 20 days after order. Shipments are designated as FOB Destination to locations at Mountain Home AFB, Idaho, and Ellsworth AFB, South Dakota. The items are subject to a non-extendable six-month shelf life and must be marked with Special Marking Code 32. The contract mandates strict adherence to hazardous materials regulations, requiring the submission of Safety Data Sheets and labels compliant with 29 CFR 1910.1200 and Federal Standard No. 313-E prior to award. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements RP001 and IP025. Inspection and acceptance will occur at the destination per FAR 52.246-1. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and compliance with DFARS cybersecurity and domestic material restrictions, including the Buy American Act and Berry Amendment.

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # SPE8ES-27-T-0262

Solicitation SPE8ES-27-T-0262, issued by the Defense Logistics Agency Troop Support Construction and Equipment office, is for the procurement of four adhesive kits under NSN 8040-01-441-0671. The required product is a high-strength, self-leveling, translucent liquid adhesive conforming to military specification MIL-A-46146B and its third amendment. Each kit must include adhesive in 2.8 fl oz quantities in resealable, vapor-tight tubes and a primer in a minimum 1/2 oz leak-proof container. Delivery is required within 20 days after order to Holloman AFB, New Mexico, with inspection and acceptance occurring at the destination. The contract mandates strict adherence to hazardous materials regulations, requiring the submission of Safety Data Sheets and labels consistent with 29 CFR 1910.1200 prior to award. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific storage temperature markings between 60 and 80 degrees Fahrenheit. Quality assurance requires a Certificate of Quality Compliance and a manufacturer inspection system meeting ISO 9001:2015 standards. Key regulatory clauses include the Buy American Act, HUBZone small business price preferences, and DFARS cybersecurity reporting requirements. Invoicing must be processed electronically through the Wide Area WorkFlow system.

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # SPE8ES-27-Q-0018

Solicitation SPE8ES-27-Q-0018 is a firm fixed price requirement issued by the Defense Logistics Agency for the procurement of black sealing compound, specifically part number PR-2201 B1 from Desoto International, Inc. The requirement consists of two line items totaling 39 kits of 2.5 fl oz containers. Delivery is required within 90 days after the delivery order, with specific required delivery dates in September 2026. The items are to be shipped FOB destination to Amentum DDHU at Hill Air Force Base, Utah. The sealing compound is classified as a hazardous material and is subject to strict shelf-life requirements of six months, which may be extendable. Consequently, suppliers must provide Safety Data Sheets and Hazardous Communication Standard labels in accordance with 29 CFR 1910.1200 for approval prior to award. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, and the product must be stored below 80 degrees Fahrenheit. Invoicing is to be processed electronically through the Wide Area WorkFlow system. This is not a small business set-aside, and quotations are due by November 6, 2026.

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # SPE8ES-27-Q-0016

Solicitation SPE8ES-27-Q-0016 is a small business set-aside for the procurement of two adhesive kits (NSN 8040-00-858-9798) under a firm fixed price contract. Each kit must consist of one pint of resin and 2 oz of hardener in separate containers, stored at temperatures below 80.6 degrees. Delivery is required within 116 days after the order, with inspection and acceptance occurring at the destination. The contract mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-129 and MIL-STD-2073-1E. Due to the nature of the materials, suppliers must comply with the Hazard Communication Standard and Federal Standard No. 313-E, providing Safety Data Sheets and compliant labeling. Packaging requires specific intermediate containers, such as D3 or 4G boxes, and must include an itemized list of contents. The item is subject to a non-extendable 12-month shelf life. Payment will be processed electronically via the Wide Area WorkFlow system.

POSTED

DEADLINE

Solicitation # SPE8ES-27-T-0215

Solicitation SPE8ES-27-T-0215 is a Request for Quotations issued by DLA Troop Support Construction and Equipment for the procurement of 12 gallons of Class 1 Grade A adhesive, identified by NSN 8040015533085. This critical application item must adhere to basic specification MIL-DTL-3316D and carries a non-extendable shelf life of 24 months. The requirement specifies a delivery timeline of 180 days after order, with a need ship date of May 3, 2027, and a required delivery date of May 22, 2027. Delivery, inspection, and acceptance are all set for FOB Destination at DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to technical and quality requirements via the DLA Master List and specifies packaging and marking according to MIL-STD-2073-1E and MIL-STD-129, including Special Marking Code 32 for shelf life. Because the adhesive is classified as hazardous material, the contractor must comply with IP025 and the Hazard Communication Standard 29 CFR 1910.1200. Administrative requirements include electronic invoicing through the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses regarding the Buy American Act, cybersecurity standards under NIST SP 800-171, and the safeguarding of covered defense information.

DLA DIST SAN JOAQUIN

POSTED

1 day ago

DEADLINE

in 1 day

AI Contract Overview

Dallas Area Rapid Transit is seeking a subcontractor for the supply of precision-cut adhesive films or protective coatings. The required materials must measure 51.84 inches in width by 25.31 inches in height and are intended for application on glass or signage throughout DART facilities. This opportunity was posted on October 17, 2025, with a response deadline of October 28, 2025. The project falls under NAICS code 325520 and is managed by the agency in Texas.

General Info

Agency

Texas → Dallas Area Rapid Transit

NAICS

325520 - Adhesive Manufacturing

Place of Performance

TX, USA

Set-Aside

NONE

Documents

This scope was carved out of 2096149.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

FILM,51.84 IN (W) X 25.31 IN (H) (GLASS 09-001-497) | 2096149

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedOct 17

subcontract

Response DeadlineOct 28

Deadline has passed

Submission Closed

10/28/2025, 07:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyTexas → Dallas Area Rapid Transit

ContactsNo contacts available

OfficeN/A

Organization / AgencyTexas → Dallas Area Rapid Transit

Office AddressN/A

ContactsNo contact information available

Full Description

Supply of precision-cut adhesive film (51.84" W x 25.31" H) for application on glass or signage in DART facilities.

More opportunities from Texas → Dallas Area Rapid Transit

Same awarding agency

Supply of Adhesive Films or Protective Coatings

Contract Overview

Active Opportunities Like This One

AI Contract Overview

General Info

Documents

AI Contract Breakdown

No documents to break down

Timeline

Find active opportunities like this

Organization & Contact Information

Full Description

More opportunities from Texas → Dallas Area Rapid Transit

Earlier notices in this NAICS code

Get AI-powered intelligence on the opportunities still open