Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Supply of Aerospace-Grade Raw Materials for Rotor Yoke

Active

Federal

Response Deadline09/11/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the supply of certified aerospace-grade raw materials for rotor yoke components used in DLA and Air Force aircraft projects. The provider must supply specialty alloys that meet specific metallurgical requirements for NSN 1615-01-447-6764 and provide Mill Test Reports to maintain strict traceability for Critical Safety Items. All materials must comply with Buy American requirements and be delivered as certified raw material stock. Managed by the Department of Defense under the ASC Supplier OE and AF Division, the contract falls under NAICS code 336413. The place of performance is located in New Cumberland, Pennsylvania. The solicitation was posted on September 3, 2026, with a response deadline of September 11, 2026.

General Info

Supply of certified aerospace alloys for rotor yoke components for DoD aircraft projects.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment ManufacturingView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A7-26-T-716M.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CONTRACTOR FIRST ARTIC

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 3

subcontract

Response DeadlineSep 11

Submission deadline

Response Deadline

09/11/2026, 05:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies certified aerospace-grade raw materials for prime contractors on DLA/Air Force aircraft component projects. Provides specialty alloys meeting metallurgical specifications for NSN 1615-01-447-6764 and delivers Mill Test Reports to ensure traceability for Critical Safety Items (CSI). Complies with Buy American requirements. Delivers certified raw material stock.

Similar Contracts

Same NAICS industry code

Supply of Electrostatic Discharge (ESD) WorkbenchesThis subcontract involves the manufacture and delivery of two straight Electrostatic Discharge (ESD) workbenches for prime contractors supporting U.S. Air Force projects. The workbenches must be constructed using ESD-safe surfaces and materials to prevent electrostatic discharge, ensuring full compliance with ESD industry standards and Department of Defense item unique identification requirements. The contract is a total Small Business Set Aside under NAICS code 336413 and is managed by the Department of Defense agency FA3016 502 Cons Cl. Performance will take place in San Antonio, Texas, with the final delivery of the two completed units provided FOB Destination.

FA3016 502 Cons Cl

POSTED

about 19 hours ago

DEADLINE

15--DOOR,AIRCRAFT

Solicitation # N0038326QNA98

This contract solicitation is for the procurement of four aircraft doors under NSN 1R-1560-015054036-V2, with delivery terms set as FOB Origin. Due to the flight critical nature of the parts and the specialized engineering and manufacturing knowledge required, the government requires source approval from the design control activity. Because the approved sources hold essential data rights and technical knowledge not economically available to the government, the item is not currently open for full competition. The government intends to negotiate with a single source under FAR 6.302-1, although other responsible sources may submit capability statements or proposals within the specified timeframe. Any prospective bidder not already approved must provide detailed documentation via the NAVSUP Weapon Systems Support Source Approval Information Brochures to be considered for award. The procurement is managed by the Navsup Weapon Systems Support office in Philadelphia, Pennsylvania.

Navsup Weapon Systems Support

POSTED

about 19 hours ago

DEADLINE

in about 1 month

16--FUEL CELL,RH SPONSO

Solicitation # SPRPA126RWB75

This presolicitation notice, solicitation number SPRPA126RWB75, is for the procurement of 78 units of a right hand sponson fuel cell under NSN 7R-1680-014938783-V2. The delivery terms are FOB Origin. Due to the flight critical nature of the item and the lack of available government technical data or data rights, the part must be acquired from or repaired by sources specified on a source control or selected item drawing. The government intends to negotiate with a single source under FAR 6.302-1, though other responsible sources may submit capability statements or proposals within the specified timeframe. Any entity not previously approved as a source must submit the required documentation detailed in the NAVSUP Weapon Systems Support Source Approval Information Brochures along with their proposal to be considered for award. The response deadline for this requirement is October 5, 2026.

Pa DLA Aviation At Philadelphia

POSTED

about 19 hours ago

DEADLINE

in about 1 month

16--CONTROL COLUMN,AIRC, IN REPAIR/MODIFICATION OF

Solicitation # N0038326RBB08

This solicitation is for the procurement of 15 units of an aircraft control column under NSN 7R-1680-014752008-V2, with delivery terms set as FOB Origin. Due to the flight critical nature of the part and the specialized technical data and manufacturing knowledge required, the item necessitates engineering source approval by the design control activity. Only previously approved sources have been solicited, as the government has determined that existing technical data is insufficient to support full and open competition without risking part quality. Prospective bidders who are not currently approved must submit detailed information as specified in the NAVSUP Weapon Systems Support Source Approval Information Brochures along with their proposals. Failure to provide the required data or proof of a pending approval request will result in the offer not being considered for award. While the government is not currently utilizing FAR Part 12 for commercial item acquisition, interested parties may notify the contracting officer of their ability to provide a commercial alternative within 15 days of the notice.

Navsup Weapon Systems Support

POSTED

about 19 hours ago

DEADLINE

in about 1 month

Transmission, Mechan_End_Item_B-1B_NSN_1680011427633RK_PN_NF53302-03B

Solicitation # FD20302700238

The Department of the Air Force, through the 423rd SCMS at Tinker AFB, is conducting market research via a Sources Sought notice to identify potential providers for the procurement of mechanical transmission spares for the B-1B platform. The requirement focuses on the manufacture of part number NF53302-03B (NSN 1680011427633RK), with an estimated quantity ranging from a minimum of 12 to a maximum of 69 units. This is a new spares buy and does not include repair requirements. The government is seeking capable sources to provide all necessary labor, materials, and equipment for manufacturing, inspection, testing, and shipping. This effort is open to all business types, including large and various small business designations, under NAICS code 336413. Interested vendors must respond by October 4, 2026. This notice is for market research purposes only to determine the acquisition strategy and does not constitute a solicitation or a commitment to award a contract.

Ok DLA Aviation At Oklahoma City

POSTED

about 19 hours ago

DEADLINE

16--VALVE,REGULATING SY

Solicitation # SPRPA126RVC40

This presolicitation, issued by the Department of Defense through the DLA Aviation office in Philadelphia, is for the procurement of 22 regulating system valves under NSN 7R-1680-015256162-V2. The delivery terms are specified as FOB Origin, and the response deadline for solicitation SPRPA126RVC40 is October 5, 2026. Due to the nature of the parts, acquisition or repair must be conducted by sources specified on a source control or selected item drawing per DoD-STD-100. The government does not possess the necessary technical data, data rights, or manufacturing knowledge to allow for alternative sources or qualification testing of other parts, as such data cannot be economically obtained.

Pa DLA Aviation At Philadelphia

POSTED

about 19 hours ago

DEADLINE

SHUTTLE ASSEMBLY

Solicitation # SPRPA126RYC86

Solicitation SPRPA1-26-R-YC86 is a requirement issued by DLA Aviation at Philadelphia for the procurement of Shuttle Assemblies (NIIN 011581698). These components are designated as Aircraft Launch and Recovery Equipment (ALRE) Critical Safety Items (CSI) used in crucial shipboard systems for aircraft launch and recovery. Due to the high risk associated with defective material, the contract mandates strict quality controls, including engineering source approval by the Naval Air Systems Command for all eligible manufacturers. The procurement is being conducted under Emergency Acquisition Flexibilities and requires the contractor to maintain ISO 9001 certification or an equivalent quality management system. The contract emphasizes rigorous inspection and testing protocols, including mandatory First Article Testing (FAT) and 100% inspection of critical and major characteristics. Specific requirements include witnessed hardness testing and magnetic particle inspection, with non-destructive testing performed by NADCAP or ISO 17025 accredited laboratories. The government will perform inspection and acceptance at the origin, with final certification of the top assembly occurring at Lakehurst. Award will be made to a single, responsible offeror based on a determination of the most advantageous proposal, considering both price and past performance. Payment and invoicing are to be processed electronically via the Wide Area Workflow (WAWF) system.

Pa DLA Aviation At Philadelphia

POSTED

about 19 hours ago

DEADLINE

Solicitation # SPRRA2-26-R-0080

Solicitation SPRRA2-26-R-0080 is a formal request for a five-year, Firm Fixed Price (FFP), Indefinite Delivery/Indefinite Quantity (IDIQ) contract to acquire Canopy Fixed units (NSN 1560-01-309-8314, Part Number 5101580-2) for the M-DP Avenger weapon system. The procurement is restricted to Texstars LLC (doing business as PPG Aerospace) as the only responsible source under FAR Part 6.103-1. The contract specifies a minimum guaranteed quantity of 137 units, with a maximum potential of 500 units. Following two amendments, the final closing date for proposals is September 9, 2026. The contract requires Contractor First Article Testing (FAT) for one sample, with the test report due 15 days after testing and a government review period of 60 days. Production lead time is 780 days after contract award with FAT, or 360 days without FAT, with deliveries directed to Chambersburg, Pennsylvania. Due to the nature of the technical data, all eligible sources must maintain an active United States/Canada Joint Certification Program (JCP) profile to comply with Arms Export Control Act restrictions. Evaluation will be based on technical acceptability and pricing reasonableness, with certified cost and pricing data required for proposals exceeding 2,500 dollars.

Al DLA Aviation At Huntsville

POSTED

about 19 hours ago

DEADLINE

New Manufacture of LINKAGE ASSEMBLY /1680010732187RK /16C0101-811

Solicitation # SPRTA1-26-R-0403

The Department of Defense, through the DLA Aviation office in Oklahoma City, is seeking a contractor for the new manufacture of Linkage Assembly part number 1680010732187RK / 16C0101-811. This presolicitation, identified by solicitation number SPRTA1-26-R-0403, falls under NAICS code 336413 for other aircraft parts and accessory manufacturing. The response deadline for this requirement is September 3, 2026. There is no specific set-aside designated for this procurement. Interested parties should direct inquiries to the primary point of contact, Jessie Payne, at the Tinker Air Force Base location in Oklahoma.

Ok DLA Aviation At Oklahoma City

POSTED

about 19 hours ago

DEADLINE

in about 1 month

16--GENERATOR,VARIABLE, IN REPAIR/MODIFICATION OF

Solicitation # N0038326RHA76

This presolicitation notice from the Department of Defense, specifically Navsup Weapon Systems Support, concerns the repair or modification of 75 variable generators under NSN 7R-1680-016578001-V2 and TDP VER 002. The delivery terms are established as FOB Origin. The government intends to solicit and negotiate with a single source under FAR 6.302-1, though interested parties may submit capability statements or proposals within 45 days of publication to be considered for the requirement. Technical documentation and federal specifications can be obtained through the DOD Single Stock Point or the ASSIST-Online portal. The government has determined that FAR Part 12 for commercial items will not be used, although parties may notify the contracting officer within 15 days if a commercial item can satisfy the requirement. All awards are contingent upon the offeror meeting specific qualification requirements at the time of award in accordance with FAR clause 52.209-1.

Navsup Weapon Systems Support

POSTED

about 19 hours ago

DEADLINE

DRAWER,POWER DIST,A

Solicitation # SPRPA126QZB85

This solicitation, numbered SPRPA126QZB85, is issued by the Department of Defense through the Pa DLA Aviation office in Philadelphia for the procurement of a power distribution drawer. Classified as a Critical Application Item under NAICS code 336413, the request is released under Emergency Acquisition Flexibilities. The procurement process requires adherence to strict quality standards, including higher-level contract quality requirements and fixed-price inspection of supplies. The solicitation was posted on September 4, 2026, with a response deadline of September 14, 2026. Key compliance mandates include the Buy American-Free Trade Agreements, security prohibitions and exclusions, and the use of Wide Area Workflow for payment instructions. Proposals must be submitted via electronic mail, and the contract incorporates specific provisions for value engineering, royalty information, and the integrity of unit prices.

Pa DLA Aviation At Philadelphia

POSTED

about 19 hours ago

DEADLINE

15--TANK,FUEL,AIRCRAFT

Solicitation # SPRPA126RWC16

This presolicitation notice from the Department of Defense, managed by DLA Aviation at Philadelphia, is for the procurement of 134 aircraft fuel tanks under NSN 7R-1560-015317578-QE. The items are designated as Critical Safety Items, requiring delivery on a FOB Origin basis. Due to the flight-critical nature of the parts and the specialized engineering and manufacturing knowledge required, the government intends to solicit and negotiate with a single source under FAR 6.302-1. Strict source approval is mandatory to maintain part quality, as the approved sources hold essential technical data and design capabilities not economically available to the government. Any prospective bidder not already approved must submit comprehensive documentation via the NAVSUP Weapon Systems Support brochures to be considered. While the government is currently pursuing a single-source award, all responsible sources may submit capability statements or proposals within the specified timeframe for evaluation.

Pa DLA Aviation At Philadelphia

POSTED

about 19 hours ago

DEADLINE

in about 1 month

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

RECEIVER-TRANSMITTER, RADIO

Solicitation # SPE4A7-26-R-XB24

Solicitation SPE4A7-26-R-XB24 is a federal commercial items procurement issued by the Department of Defense ASC Supplier Oper AE and AF Div for the acquisition of radio receiver-transmitters under NSN 5820-01-650-5126. This is a total small business set-aside under NAICS code 334220, with a guaranteed minimum quantity of 35 units and a maximum contract value of 350,000 dollars. The specific requirement listed is for 140 units with a delivery timeframe of 115 days after receipt of order. All deliveries must be within the continental United States, and early or partial deliveries are acceptable at no additional cost to the government. Offers must be submitted via hard copy by September 18, 2026, as quotations through the DIBBS system are not acceptable. Quality assurance programs must comply with ISO 9001:2015, as MIL-I-45208 and MIL-Q-9858 are no longer acceptable specifications. The contract is structured as an indefinite delivery contract evaluated over five one-year base periods based on estimated annual demand. Requirements include SAM registration and adherence to specific DLA Aviation Notices, including DAAN-11-01 and DAAN-13-01.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

SCREW, CLOSE TOLERANCE

Solicitation # SPE4A7-26-R-0740

This contract is for an indefinite quantity, fixed-price agreement to supply NSN 5305-01-057-3757, a close tolerance screw used in F-15 Eagle aircraft, designated as a critical application item. The requirement is exclusively set aside for small businesses through full and open competition after excluding non-small business sources. The base performance period is five years with no options, and annual demand is estimated at 200 pouches, with each delivery order ranging between a minimum of 50 pouches and a maximum of 200 pouches. Production units must be delivered within 549 days, with shipments going to CONUS stock locations as specified on individual delivery orders under FOB Destination terms, including mandatory inspection at origin for DLA Direct requirements. Surge requirements do not apply. The contract will be awarded based on best value criteria, combining price, past performance, and other evaluation factors outlined in the solicitation. A reverse auction may be conducted through the Procurex platform, requiring suppliers to self-register at dla.procurexinc.com to participate. The solicitation, issued under number SPE4A726R0740 and posted on August 10, 2026, must be completed in full by offerors to be eligible for award, with responses due by September 21, 2026. All documents are available exclusively via the DIBBS Internet Bid Board System, and no paper copies will be provided. The contracting office is DLA Aviation in Richmond, Virginia, with Xuan Thanh Phan listed as the primary point of contact for inquiries.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 14 hours ago

DEADLINE

in about 1 month

Supply of Integra Helmet Units

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

DEADLINE

Supply of Shouldered and Stepped Stud (NSN 5307002474440)

Glass Container Manufacturing

POSTED

DEADLINE

Supply of Flow Control Thermostats (NSN 6685-01-368-0419)

Other Measuring and Controlling Device Manufacturing

POSTED

DEADLINE

Latch Assembly Supplier

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Military-Grade Packaging and Palletization Services

Packaging and Labeling Services

POSTED

DEADLINE

Communication Control Console Supplier

Other Communications Equipment Manufacturing

POSTED

DEADLINE

Supply of Precision Shims (NSN 5365013138567)This subcontract involves the supply of 24 precision shims under NSN 5365013138567 for prime contractors delivering DLA supply contracts. The manufacturer or source must provide shims that meet OEM specifications for Woodward, Inc. and General Electric Company part number 218808. All items must adhere to Critical Application Item quality standards, specifically regarding material certifications and dimensional tolerances, and require a Critical Application Item Certification. The contract is issued by the Department of Defense through the ASC Supplier Oper AE and AF Div, with the place of performance located in Corpus Christi, Texas. The solicitation was posted on September 3, 2026, with a response deadline of September 11, 2026. The work falls under NAICS code 332510.

Hardware Manufacturing

POSTED

DEADLINE

Manufacture of Main Rotor Assembly Yoke (CSI)This subcontract involves the manufacture of 50 Main Rotor Assembly Yokes for prime contractors supporting Department of Defense supply contracts. The components must be fabricated according to NSN 1615-01-447-6764 specifications and include the delivery of First Article Test Reports. Quality assurance requires the execution of First Article Testing and sampling conducted per MIL-STD-1916 or ASQ H1331. The provider must maintain SAE AS9100 quality management standards and adhere to MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. This opportunity is managed by the ASC Supplier Oper AE and AF Div under NAICS code 336413, with performance located in New Cumberland. The response deadline for this requirement is September 11, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

First Article Testing and Quality Validation ServicesThis subcontract for First Article Testing and Quality Validation Services, posted by the Department of Defense ASC Supplier Oper AE and AF Div, focuses on performing quality validation and first article testing for prime contractors on DLA supply contracts. The scope of work involves validating the performance and tolerances of component NSN 013324152 against government specifications, with coordination of testing and delivery occurring at Hill AFB, UT. The contract is set aside for Women-Owned Small Businesses under NAICS code 541380. To be eligible, providers must adhere to SAE AS9003 or ISO 9001 quality management standards. The final deliverables include a completed first article testing report and official government acceptance approval. The response deadline for this opportunity is September 11, 2026.

Testing Laboratories and Services

POSTED

DEADLINE

Manufacture and Supply of NSN 013324152 / Item 5315This subcontract involves the manufacture and supply of hardware item NSN 013324152 for prime contractors under DLA supply contracts. The selected provider must produce items according to government specifications using traditional fabrication or approved additive manufacturing processes, ensuring strict compliance with MIL-STD-129 for marking and DFARS 252.223-7008 regarding Hexavalent Chromium. To qualify, the supplier must hold SAE AS9003 or ISO 9001 certification and deliver finished hardware units. The opportunity is issued by the Department of Defense through the ASC Supplier OE and AF Division and is specifically set aside for Women-Owned Small Businesses under NAICS code 332999. Performance will take place in New Cumberland, Pennsylvania. The solicitation was posted on September 3, 2026, with a response deadline of September 11, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE