Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Supply of Air Brake Chambers (NSN: 2530-01-576-3054)

Active

Federal

Response Deadline08/14/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the manufacture, sourcing, and delivery of approximately 73 military-spec air brake chambers identified by NSN 2530-01-576-3054 and Part No. HDX H111778 under task orders issued through an Indefinite Delivery Contract. Delivery must be completed within 75 days after the award date, with terms specified as FOB origin, meaning the buyer assumes responsibility for transportation and risk once the goods leave the supplier’s location. The requirement is restricted to small businesses under a total small business set-aside as defined by FAR 19.5, ensuring only eligible small business concerns may compete. The North American Industry Classification System code is 336340, which categorizes the work within the automotive parts manufacturing sector. The procurement is managed by the Department of Defense through the Land Supply Chain organization, with the solicitation posted on the DIBBS platform and a response deadline set for August 14, 2026.

General Info

Small business set-aside for 73 military air brake chambers, FOB origin, delivery in 75 days, DoD procurement via DIBBS.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

336340 - Motor Vehicle Brake System ManufacturingView NAICS

Place of Performance

US

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 30

subcontract

Response DeadlineAug 14

Submission deadline

Response Deadline

08/14/2026, 05:00:00 PM UTCin 13 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → LAND SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → LAND SUPPLY CHAIN

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture, sourcing, and delivery of 73 estimated units of military-spec air brake chambers, NSN 2530-01-576-3054, Part No. HDX H111778, under task orders issued via an Indefinite Delivery Contract. Delivery required within 75 days ADO, FOB origin.

Similar Contracts

Same NAICS industry code

Supply of Vehicular Door Handles and Air Control HandlesThe contract requires the manufacture and supply of 129 military-specification vehicular door and air control handles, all of which must meet strict defense standards for performance, durability, and reliability. The items are intended for use in military vehicles and must be delivered with fully compliant packaging, labeling, and hazardous materials documentation to ensure safe handling, storage, and transportation in accordance with federal and military regulations. The work is to be performed under a subcontract arrangement linked to the Department of Defense's LSO Combat Vehicles and Armament division, with the place of performance designated as New Cumberland, Pennsylvania, 17070-5002. The solicitation, identified by the NAICS code 336340 for Aircraft and Part Manufacturing, was posted on July 30, 2026, and responses must be submitted by August 10, 2026, indicating a narrow window for proposal preparation and submission. All vendors must comply with defense supply chain requirements, including any applicable quality control, traceability, and documentation protocols specific to defense-related hardware.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Supply of Vehicular Suspension Control ArmsThe contract seeks the procurement, packaging, labeling, and delivery of vehicular suspension control arms under a total small business set-aside as defined by the SBA, with the NAICS code 336340 indicating the industry is focused on automotive parts manufacturing. The work must strictly adhere to hazardous material handling protocols and military packaging standards to ensure safety, compliance, and readiness for military use. Performance of the contract is centered at New Cumberland, Pennsylvania, with a zip code of 17070-5002, and all deliverables must meet the high reliability and durability expectations required by the Department of Defense. The opportunity was posted on July 30, 2026, with responses due by August 10, 2026, and is structured as a subcontract under the Land Supplier Operations Vehicle Support organization.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Brake Shoe Manufacturing and Supply

LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Universal Joint Yoke for Vehicular UseThe contract calls for the manufacture or supply of a vehicular universal joint yoke designed to meet stringent military specifications regarding form, fit, function, and durability, ensuring reliability under demanding operational conditions. Compliance with all relevant packaging, labeling, and hazardous materials handling standards is mandatory to support safe transportation, storage, and inventory management throughout the defense supply chain. The work is classified as a subcontract under NAICS code 336340, indicating specialized manufacturing within the motor vehicle parts sector, and the performance location is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on July 30, 2026, with responses due by August 10, 2026, and is administered by the Department of Defense through its Land Supply Chain organization. While no set-aside type is specified, the contract remains open to eligible subcontractors capable of fulfilling the technical and regulatory requirements. All submissions must adhere to the detailed military standards applicable to defense-grade components, and interested parties are directed to the official DIBBS platform for access to full solicitation documents.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Supplier of Defense-Related Materials (Commercial or Specialty Items)The contract involves the supply of defense-related commercial or specialty items under CLINs with quantities ranging from three to five units per line, each unit priced between $521 and $779. These items are likely specialized components or materials integral to military systems, requiring strict compliance with domestic sourcing regulations and a valid CAGE code for vendor identification. The work must be performed at the specified location in Tracy, California, with a zip code of 95304-5000, indicating a focused operational footprint for delivery and support. The NAICS code 336340 points to the aerospace product and parts manufacturing sector, aligning with the defense context. The contract is structured as a subcontract with a response deadline of August 10, 2026, and was posted on July 30, 2026, giving potential vendors approximately two weeks to prepare and submit proposals. The contracting agency is the Department of Defense under the organizational name LAND SUPPLIER OPNS ENGINES, suggesting coordination with land-based defense equipment programs. While no set-aside type is specified, the commercial nature of the items and the requirement for domestic sourcing imply preferences for U.S.-based suppliers with proven capability in producing high-integrity defense materials. The solicitation is accessible via a DIBBS platform link, which is the standard portal for Department of Defense subcontracting opportunities.

LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

Bumper Supply for Military VehiclesThe contract mandates the supply of 65.5 packaged units of a military bumper identified by NSN 5340015640362, encompassing full manufacturing, packaging, labeling, and delivery to the designated destination at New Cumberland, Pennsylvania, with ZIP code 17070-5002. The work falls under NAICS code 336340, indicating classification within the automotive parts and accessories manufacturing sector, and is structured as a subcontract under the Department of Defense’s Land Supply Chain. All deliverables must comply with military specifications for durability, fit, and function, and the final packaging must meet stringent logistical and identification standards for military distribution. The solicitation was posted on July 30, 2026, with a mandatory response deadline of August 10, 2026, leaving a twelve-day window for submission. Bidders must ensure their proposals address not only technical compliance but also timely production scheduling and secure transportation to meet operational readiness requirements. While no set-aside type is specified, the contract is managed through the Defense Logistics Agency’s DIBBS platform, requiring vendors to engage through the specified online portal for submission and communication. Failure to adhere to packaging, labeling, or delivery timelines could result in rejection or penalties, emphasizing precision and reliability as critical success factors.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Commercial Item Supply of CAM, CONTROL ComponentsThe contract pertains to the supply of commercial off-the-shelf CAM and CONTROL components for delivery to DLA Distribution in New Cumberland, Pennsylvania, with strict adherence to military packaging and marking standards to ensure compatibility with defense logistics systems. The components must meet defined military specifications despite being commercially available, ensuring reliability, traceability, and proper identification throughout the supply chain. The solicitation is designated as a subcontract under NAICS code 336340, reflecting its alignment with automotive equipment manufacturing, and is managed by the Land Supplier Operations Wheeled Vehicles organization within the Department of Defense. All responses are due by August 10, 2026, with the solicitation posted on July 30, 2026, providing a ten-day window for contractor submissions. The place of performance is clearly identified as New Cumberland, PA, with a ZIP code of 17070-5002, indicating the specific logistics hub where the components will be received and distributed. While no set-aside criteria or point of contact details are provided, the requirement emphasizes full compliance with military handling protocols, making successful performance contingent on precise documentation, labeling, and packaging procedures that align with DoD procurement guidelines. The contract opportunity is accessible through the DIBBS platform using the provided RFQ link.

LAND SUPPLIER OPNS WHEELED VEHICLES

POSTED

DEADLINE

Vehicular Wheel Hub Supply (NSN 2530015883866)The contract calls for the supply of 14 military-spec vehicular wheel hubs identified by NSN 2530015883866, with full compliance required to established technical and marking standards to ensure interoperability and durability in operational environments. The procurement is structured as a subcontract under NAICS code 336340, indicating it falls within the motor vehicle body and trailer manufacturing sector, and is managed by the Department of Defense under the organizational oversight of LAND SUPPLIER OPNS VEHICLE SPT. Performance of the contract is designated to occur at New Cumberland, Pennsylvania, with the zip code 17070-5002, specifying the delivery location for the completed units. The solicitation was posted on July 30, 2026, and responses are due by August 10, 2026, establishing a tight ten-day window for submission. The contract is accessible via the DIBBS system at the provided link, though no point of contact or set-aside designation has been specified in the posting.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Manufacture of Structural Vehicular Frame SectionsThe contract requires the fabrication and supply of nine structural vehicular frame sections that must fully comply with military specifications including MIL-STD-129 and DLA packaging standards to ensure uniformity, durability, and logistical compatibility. The work is classified as a subcontract under NAICS code 336340, indicating it falls within the motor vehicle body manufacturing sector, and is being managed by the Department of Defense through its LAND SUPPLIER OPNS VEHICLE SPT office. Performance is to take place at a designated location in Tracy, California, with a zip code of 95304-5000, and all deliverables must meet rigorous defense-grade quality and documentation requirements. The solicitation was posted on July 30, 2026, with a response deadline of August 10, 2026, leaving a narrow window for interested parties to submit proposals. While the solicitation number is unspecified, the official platform for submission and information is the DIBBS system via the provided UI link. There is no set-aside designation indicated, meaning the contract is open to all eligible subcontractors regardless of business size or status, and no point of contact is listed, requiring proposers to rely on the DIBBS portal for guidance and updates. Compliance with packaging and labeling standards is critical to ensure seamless integration into military supply chains.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

LINING SET, FRICTION

Solicitation # SPE7L3-26-T-141V

The contract pertains to the procurement of a friction lining set with NSN 2530-01-539-7873 and part number DBC-250-CERM-PAD, sourced from Kodiak Trailer and Mfg Inc and PD Myco Trailers LLC. A total quantity of 39 units is required at a unit price of $39.00, for a total contract value of $1,521.00. Delivery is mandated FOB origin within 165 days from the contract date, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and the material must be packaged in compliance with either Fed-Std-313 for hazardous goods under TQ requirement IP025 or ASTM D3951 for non-hazardous items, with all DLA Master List technical and quality requirements taking precedence over ASTM standards. Packaging and labeling must adhere to MIL-STD-129 and RP001 DLA packaging protocols, including palletization standards. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with the specified parcel post and freight shipping addresses identical. The required ship date is January 23, 2027, aligning with the original delivery deadline. The solicitation number is SPE7L3-26-T-141V, issued under NAICS code 336340, with Viviane Kounkorgo listed as the primary point of contact. All technical and quality specifications referenced via R or I numbers are governed by the current version of the DLA Master List of Technical and Quality Requirements as of the solicitation issue date.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

CHAMBER, AIR BRAKE

Solicitation # SPE7L1-26-U-0527

The contract solicitation SPE7L1-26-U-0527 is a total small business set-aside issued by the Defense Logistics Agency (DLA) under the Land Supply Chain organization for the procurement of 73 air brake chambers, identified by NSN 2530-01-576-3054 and part number HDX H111778. This is an indefinite-delivery contract with a one-year ordering period, a maximum value of $350,000, and a guaranteed minimum of 10 units after award, though the listed quantity of 73 units is an estimate and not guaranteed. Delivery is required FOB origin within 75 days of order placement, with inspection and acceptance occurring at the destination point. Packaging and labeling must strictly comply with MIL-STD-129 for marking, barcoding, and identification, while palletization follows DLA’s RP001 packaging requirements. Non-hazardous materials must be packaged per ASTM D3951 unless superseded by a higher-priority requirement from the DLA Master List of Technical and Quality Requirements, which takes precedence. Hazardous materials must conform to Fed-Std-313 and TQ Requirement IP025, with labels compliant with 29 CFR 1910.1200 unless exempted by other federal statutes, and pre-award submission of hazard labels is required for non-exempted items. The contract incorporates multiple Federal Acquisition Regulation (FAR) and Defense Federal Acquisition Regulation Supplement (DFARS) clauses, including those governing unauthorized obligations, accelerated payments to small business subcontractors, safeguarding of contractor information systems, NIST SP 800-171 compliance, trafficking in persons, employment eligibility verification, sustainable products, and hazardous material identification. Subcontracting for commercial products or services is permitted under specific conditions, and deviations apply to several clauses indicating tailored implementation. Invoicing must occur through the Wide Area WorkFlow (WAWF) system, and payment processing depends on designated DoDAAC codes not fully detailed in the solicitation. Offerors must provide their Unique Entity Identifier (UEI) and CAGE code, affirm small business status under NAICS code 336340, and comply with socioeconomic representation requirements for entities such as WOSB, SDVOSB, HUBZone, or SDB. The solicitation requires electronic submission via the DLA-

LAND SUPPLY CHAIN

POSTED

DEADLINE

DRYER, AIR VEHICULAR BR

Solicitation # SPE7L3-26-T-138P

The contract is for the procurement of air vehicular brake dryers under solicitation SPE7L3-26-T-138P, issued by the Department of Defense through the Defense Logistics Agency. The item, identified by NSN 2530-01-442-4606, is classified as a critical application item and must comply with technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements. The contract specifies two line items: 47 units at $47.00 each and 681 units at $634.00 each, totaling 728 units, with delivery required within 154 days of contract award. All items must be delivered FOB origin with zero variance allowed in quantity, inspected and accepted at the destination, and packaged according to MIL-STD-2073-1E with marking per MIL-STD-129 and palletization in accordance with DLA packaging standards. Shipping addresses are designated for Jacksonville, Florida and Tracy, California, with a required ship date of January 12, 2027, and original delivery deadline of December 1, 2026. The solicitation was set aside for Women-Owned Small Businesses under NAICS code 336340, with primary point of contact Matthew Curry. Compliance with hazardous materials shipping protocols and all applicable DLA procedural notes is mandatory.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

Small Business Subcontracting Plan ImplementationThe contract requires support to the prime contractor in fulfilling small business utilization objectives under the Federal Acquisition Regulation provisions FAR 52.219-9 and FAR 52.219-16, which mandate the development and execution of a small business subcontracting plan. This includes performing outreach to small businesses, identifying and securing qualified subcontractors, and ensuring compliance with reporting requirements to demonstrate progress toward established goals. The effort is centered on facilitating meaningful participation of small businesses in the performance of work under the prime contract, with a focus on active engagement and transparent documentation throughout the contract lifecycle. The solicitation is associated with NAICS code 541611, which pertains to management consulting services, and is managed by the Department of Defense through the Land Supply Chain office. The response deadline is August 31, 2026, with the opportunity posted on July 31, 2026. Performance location and point of contact details are not specified, but the work is intended to support defense-related procurement activities. The type of set aside is not indicated, and the contract is structured as a subcontracting support engagement rather than a direct award. All activities must align with federal small business contracting policy and timelines to ensure compliance and accountability.

Administrative Management and General Management Consulting Services

POSTED

about 13 hours ago

DEADLINE

in about 1 month

Cybersecurity Compliance and Incident Response SupportThe contract provides ongoing support for maintaining compliance with NIST SP 800-171 requirements, managing cyber incident reporting procedures, ensuring proper preservation of controlled unclassified information on media, and overseeing subcontractors to ensure adherence to DFARS 252.204-7012. This support is essential for safeguarding sensitive defense information throughout the supply chain and must be delivered in alignment with all applicable federal cybersecurity standards. The work involves continuous monitoring, documentation, and response capabilities to address potential threats and ensure regulatory compliance across all layers of the contract structure. This is a subcontract under the Department of Defense, classified under NAICS code 541512 for computer systems design services, with a submission deadline of August 31, 2026. Performance location and specific agency office details are not specified, but the scope centers on safeguarding controlled unclassified information in alignment with federal mandates. The requirement applies to any subcontractor handling or processing covered defense information, and the contractor must demonstrate established processes for incident detection, reporting, media handling, and vendor compliance enforcement. All activities must be conducted with strict attention to accountability, traceability, and timely response to cybersecurity events as defined by DoD regulations.

Computer Systems Design Services

POSTED

about 13 hours ago

DEADLINE

in about 1 month

Product Verification Testing (PVT) SupportThe contract supports government-conducted Product Verification Testing by providing comprehensive assistance in sample preparation, documentation, and coordination with Defense Logistics Agency testing laboratories, as specified in Section E05. This subcontract is focused on ensuring that all testing procedures align with federal standards and that logistical and administrative tasks are executed accurately to facilitate timely and reliable verification outcomes. The work involves close collaboration with DLA labs to meet technical requirements and maintain traceability throughout the testing lifecycle. The solicitation is posted under NAICS code 541380 and is managed by the Land Supply Chain within the Department of Defense. The opportunity is open for responses until August 31, 2026, with no specific set-aside categories or organization type restrictions indicated. Performance locations are not explicitly defined, but the work centers around DLA testing facilities and requires active coordination with government personnel. Interested parties can access further details through the official DIBBS portal linked in the contract data.

Testing Laboratories and Services

POSTED

about 13 hours ago

DEADLINE

in about 1 month

Packaging, Preservation, and Marking ServicesThe contract requires the provision of military-compliant packaging, preservation, and labeling services for chain assemblies in strict accordance with Defense Logistics Agency standards. This includes the application of accurate barcoding for inventory tracking and full compliance with hazardous communication regulations to ensure safe handling and transport. All work must meet the stringent requirements for military-grade documentation, material protection, and labeling procedures to support logistics and operational readiness. The scope encompasses the full lifecycle preparation of chain assemblies from packaging through final marking, ensuring they are ready for deployment under Department of Defense protocols. This is a subcontract under the NAICS code 493190, issued by the Land Supply Chain division of the Department of Defense, with a response deadline of August 31, 2026. The performance location is not specified, but adherence to federal military logistics standards is mandatory. The solicitation is accessible via the DIBBS platform, and all submissions must comply with the detailed technical and regulatory expectations outlined by DLA without deviation. No set-aside provisions are indicated, meaning the opportunity is open to all qualified subcontractors capable of meeting the military compliance requirements.

Other Warehousing and Storage

POSTED

about 13 hours ago

DEADLINE

in about 1 month

Manufacturing of Chain Assembly, Tire (NSN 2540-12-417-2097)The contract entails the full-scale production of 541 or more units of a specialized chain assembly designed for tire applications, with the National Stock Number 2540-12-417-2097. All phases of manufacturing including material sourcing, fabrication, assembly, inspection, and packaging must adhere strictly to Defense Logistics Agency standards to ensure quality, consistency, and compliance with military specifications. The work is classified as a subcontract under NAICS code 332439, indicating it falls under Other Fabricated Metal Product Manufacturing, and is managed by the Land Supply Chain under the Department of Defense. The solicitation was posted on July 31, 2026, with responses due by August 31, 2026, and performance is expected to be carried out in accordance with DLA requirements, though the specific location of performance is not detailed. The contract does not specify a set-aside type or designated small business preferences, and no point of contact information is provided in the public details.

Other Metal Container Manufacturing

POSTED

about 13 hours ago

DEADLINE

in about 1 month

PLATE, MOUNTING

Solicitation # SPE7L1-26-Q-1419

The contract specifies the procurement of 292 mounting plates identified by NSN 5340-01-578-1311 under solicitation SPE7L1-26-Q-1419, with delivery required within 104 days after award and a firm fixed price structure with no tolerance for quantity variation. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede any conflicting specifications, and compliance with MIL-STD-130N for identification marking of military property is mandatory. The item must adhere to stringent packaging standards outlined in DLA’s RP001 and MIL-STD-129, with hazardous materials conforming to FED-STD-313 and TQ requirement IP025 while non-hazardous materials must comply with ASTM D3951 under DLA’s overarching authority. Ozone-depleting chemicals are strictly prohibited, and any alternative substances require prior approval unless explicitly authorized by the specification. The product must be sourced from qualified manufacturers listed on approved QPLs or QMLs as referenced in the associated technical documentation, and manufacturing must meet ISO 9001:2015 quality management standards. Inspection and acceptance occur at the destination, with sampling governed by MIL-STD-1916 or ASQ H1331, requiring zero non-conformances unless otherwise stipulated. The item is subject to configuration change management procedures and covered defense information controls, and all packaging must be labeled and palletized per DLA guidelines. Delivery is to the DLA Distribution facility in New Cumberland, Pennsylvania, with transportation logistics governed by DLAD procedural notes C19 and C20. The contract mandates full and open competition and applies to a Federal procurement with a NAICS code of 332722.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 13 hours ago

DEADLINE

CAP, PROTECTIVE, DUST AN

Solicitation # SPE7L1-26-Q-1420

The contract calls for the procurement of 47 protective dust and moisture seal caps with NSN 5340-01-684-3897, supplied by PALL AEROPOWER CORPORATION under part number 62RB114S0000, in compliance with stringent technical and quality requirements referenced from the DLA Master List and specific DLA directives including retention of supply chain traceability documentation per Procurement Note C03. The item is classified as a critical application requiring FAA airworthiness approval, with adherence to Drawing 13873 Rev 016843897 and Quality Assurance Provision 13873, and must meet sampling standards under MIL-STD-1916 or ASQ H1331 with zero non-conformances permitted unless otherwise specified. Packaging, preservation, and marking must conform to MIL-STD-2073-1E and MIL-STD-129, with each unit labeled with the NSN, contract number, lot number, contractor and manufacturer Cage codes, and part number, palletized per DLA packaging requirements. The contract is a firm fixed price with no variance allowed in quantity, and delivery is required within 37 days afteraward date to the DDSP New Cumberland facility in Pennsylvania. Inspection and acceptance occur at destination, and all documentation and traceability must be maintained by the contractor as mandated by DLA directives.

Hardware Manufacturing

POSTED

about 13 hours ago

DEADLINE

Solicitation # SPE7L1-26-T-823H

This contract specifies the procurement of an O-RING with part number KRP203321V-ORING and NSN 5331016878523, requiring a quantity of 176 units to be delivered FOB origin within 44 days of award. The item is classified as a Type I shelf-life item with a non-extendable lifespan of 180 months, governed by RS039 and identified by special marking code 32. All packaging must comply with MIL-STD-2073-1E and MIL-DTL-117, Type II, Class C, Style 1, ensuring the product is sealed in a medium-duty, waterproof, greaseproof, and opaque bag to protect against UV degradation, applicable to direct vendor delivery, foreign military sales, and stock shipments. Marking and palletization must follow MIL-STD-129 and DLA packaging requirements. The delivery destination is DLA Distribution San Diego, with the same address used for freight shipping and parcel post. Inspection and acceptance occur at the destination with zero variance permitted in quantity. The contract references technical and quality standards from the DLA Master List and incorporates requirements for hazardous materials packaging and transportation as per IP025 and DLAD Proc Note C19/C20. The solicitation was issued under SPE7L1-26-T-823H with a response deadline of July 20, 2026, and an original required delivery date of February 3, 2027, though the needed ship date is set for September 3, 2026.

Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

about 13 hours ago

DEADLINE

SPRING, HELICAL, TORSION

Solicitation # SPE7L1-26-Q-1422

A solicitation has been issued for 12 helical torsion springs identified by NSN 5360-01-236-0286 under contract number SPE7L1-26-Q-1422, with a response deadline of August 14, 2026, and a posted date of July 31, 2026. The item falls under NAICS code 332613 and is being procured by the Department of Defense through the Land Supply Chain organization, with performance required in Greensboro, North Carolina, 27409. The delivery timeline is set for 193 days after award, and the solicitation is open to federal contracting with no set-aside restrictions specified. Primary point of contact for inquiries is Derek Roberts, reachable by phone at 614-907-3824 or email at derek.c.roberts@dla.mil, and additional details can be accessed via the official DIBBS platform.

Spring Manufacturing

POSTED

about 13 hours ago

DEADLINE

CHAIN ASSEMBLY, TIRE

Solicitation # SPE7L1-26-R-0099

The contract is for the procurement of 541 units of CHAIN ASSEMBLY, TIRE with NSN 2540-12-417-2097, requiring delivery within 120 days after delivery order issuance. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless an amendment supersedes it. Packaging must comply with DLA packaging standards, and government identification must be removed from all non-accepted supplies. The use of Class I ozone-depleting chemicals is strictly prohibited in any component or process, overriding any conflicting specification but without waiving product performance requirements; any substitute chemicals require prior approval unless explicitly authorized by the specification. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are deemed major. MIL-STD-105/ASQ Z1.4 may be used to determine sample size, but acceptance requires zero non-conformances unless otherwise stated. The solicitation was issued on July 31, 2026, with responses due by August 31, 2026, under solicitation number SPE7L1-26-R-0099, managed by the Department of Defense’s Land Supply Chain through point of contact Sarah Harmon.

Rubber Product Manufacturing for Mechanical Use

POSTED

about 13 hours ago

DEADLINE

in about 1 month

PLUG ASSEMBLY, SEALING

Solicitation # SPE7L1-26-Q-1417

The contract is for the procurement of four plug assemblies for sealing, identified by NSN 5340-01-324-8500, under solicitation SPE7L1-26-Q-1417, with a response deadline of August 7, 2026, and a required delivery within 202 days after award. The item is governed by DLA packaging and technical requirements incorporated through the DLA Master List of Technical and Quality Requirements, with revisions effective on either the solicitation issue date or award date depending on the acquisition size. Offerors must comply with MIL-STD-130N for identification marking of U.S. military property and source control drawing requirements; only approved sources may supply the item, and non-approved offerors must obtain OEM source approval and submit documentation with their proposal. The technical data associated with this item is subject to export controls under ITAR or EAR, prohibiting unauthorized disclosure or export to foreign persons or entities, including foreign nationals within the U.S. Compliance with DFARS 252.225-7048 is mandatory, and contractors must hold a valid US/Canada Joint Certification Program certification, complete required DOD export control training, and be approved by DLA to access controlled data. Additionally, the contractor must complete a Cybersecurity Maturity Model Certification Level 2 self-assessment. All submissions must adhere to strict data handling protocols, and proprietary information must be safeguarded against unauthorized use or dissemination.

Hardware Manufacturing

POSTED

about 13 hours ago

DEADLINE

Solicitation # SPE7L1-26-Q-1416

The contract pertains to the procurement of 17 units of PLUG, VENT with NSN 5340-01-288-7818 under solicitation SPE7L1-26-Q-1416, with a delivery requirement of 222 days after contract award. Technical data associated with this item is subject to export controls under either ITAR or EAR, meaning any disclosure to foreign persons—regardless of location—is prohibited without prior authorization from the Department of State or Department of Commerce. Only DLA contractors with approved US/Canada Joint Certification Program certification, completion of required DOD export control training, and successful submission of the DLA Export-Controlled Technical Data Questionnaire may access this data. DFARS 252.225-7048 governs compliance with these restrictions, applying uniformly to U.S. companies and their foreign subsidiaries. The procurement is managed by the Department of Defense’s Land Supply Chain, with performance due at Tinker AFB, Oklahoma, and all solicitations must be submitted by August 7, 2026, following a July 31, 2026 posting. Primary point of contact is Vittorio Tambaro, reachable via email and phone provided.

Hardware Manufacturing

POSTED

about 13 hours ago

DEADLINE