Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Supply of ASTM-B21 Alloy C46400 Material

Active

Response Deadline11/27/2026, 09:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the procurement and delivery of certified ASTM-B21 Alloy C46400 raw material stock for prime contractors supporting Navsup Weapon Systems Support Mech projects. The materials are specifically intended for the fabrication of Stuffing Box Plugs and must be accompanied by comprehensive quantitative chemical and mechanical analysis certifications to ensure compliance with technical standards. The project is managed under the Department of the Navy with performance taking place in Mechanicsburg, Pennsylvania. Interested parties must adhere to the response deadline of November 27, 2026, for this requirement categorized under NAICS code 336612.

General Info

Procure certified ASTM-B21 Alloy C46400 stock for Navy Stuffing Box Plugs by 2026.

Agency

Department Of The Navy → Navsup Weapon Systems Support Mech

NAICS

336612 - Boat Building

Place of Performance

MECHANICSBURG, PA, 17050-2411, USA

Set-Aside

NONE

Documents

This scope was carved out of N0010427QFA07.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

STUFFING BOX ASSEMB — 2040010903814 — N0010427QFA07

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 28

subcontract

Response DeadlineNov 27

Submission deadline

Response Deadline

11/27/2026, 09:30:00 PM UTCin 29 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of The Navy → Navsup Weapon Systems Support Mech

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of The Navy → Navsup Weapon Systems Support Mech

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies raw ASTM-B21 Alloy C46400 material for prime contractors on Navsup Weapon Systems Support Mech projects. Procures and delivers certified alloy stock for the fabrication of Stuffing Box Plugs. Provides quantitative chemical and mechanical analysis certifications for all materials. Delivers certified raw material stock.

Similar Contracts

Same NAICS industry code

PROPELLER,MARINE

Solicitation # N0010427QUA31

This solicitation, issued by the Navsup Weapon Systems Support Mech office, is for the repair, manufacture, inspection, testing, and packaging of a Left Hand (LH) LCU 1600 Class Marine Propeller (NSN 7HH 2010-01-607-6494). The government is seeking a single award based on a firm-fixed price, where past performance is weighted as more important than price. The scope includes the teardown and evaluation of the asset, with a requested Repair Turnaround Time (RTAT) of 118 days after receipt. Failure to meet this RTAT may result in a price reduction per unit per month, to be implemented via a reconciliation modification. The contractor must be an authorized repair source and adhere to strict quality and technical standards, including NAVSEA drawing 245-5110169 and MIL-STD packaging requirements. Key deliverables include inspection system reports and material composition certifications submitted via DD Form 1423. Administrative requirements include electronic invoicing through Wide Area Workflow (WAWF), Commercial Asset Visibility (CAV) reporting, and compliance with Cybersecurity Maturity Model Certification (CMMC) and IUID requirements. The award will be made to the offeror determined to be most advantageous to the government, considering price and past performance as evaluated through the Supplier Performance Risk System (SPRS).

Navsup Weapon Systems Support Mech

POSTED

about 5 hours ago

DEADLINE

Supplier of Light Emitting Lamp (NSN 6210-01-699-4698)This subcontract through the Defense Logistics Agency involves the supply of a specialized light emitting lamp, part number L-LR36, for naval vessel projects. The supplier must ensure the product meets the DLA Master List technical requirements and source approval documentation. All items must be packaged and marked according to MIL-STD-2073-1E, MIL-STD-129, and RP001 standards, with a final delivery of one unit to SUPSHIP Bath Iron Works in West Bath, Maine. The contract mandates strict adherence to the Buy American Act and the Berry Amendment. Interested parties must respond by November 9, 2026, for this requirement categorized under NAICS code 336612.

Defense Logistics Agency

POSTED

about 24 hours ago

DEADLINE

Supplier of Marine Navigational Lights (NSN 6220016289651)This subcontract involves the procurement or manufacture of 85 units of Marine Navigational Lights meeting NSN 6220016289651 specifications. The supplier will support prime contractors delivering on DLA Troop Support Construction and Equipment contracts, with final delivery of the packaged and marked hardware to the DDSP New Cumberland facility. All deliverables must strictly adhere to packaging and marking standards MIL-STD-2073-1E, MIL-STD-129, and RP001. Additionally, the contractor is required to maintain full compliance with the Buy American Act and the Berry Amendment. The opportunity is categorized under NAICS code 336612 and is managed through the Department of Defense.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 24 hours ago

DEADLINE

O-Ring Component Supplier (NSN 5331-01-687-3913)This subcontract, managed by the Department of Defense under the DLA Weapons Support Land Supply Chain, requires the sourcing and manufacture of O-rings meeting NSN 5331-01-687-3913 specifications. These components are intended for prime contractors delivering naval spare parts to the USS COOPERSTOWN LCS 23. To ensure quality and longevity, the contractor must package the items in medium-duty, waterproof, greaseproof, and opaque bags designed to prevent UV deterioration, with each package containing two O-rings. Eligible suppliers must maintain an active SAM registration and strictly adhere to all NSN standards. The performance of this contract is located at FPO 34085 under NAICS code 336612. Interested parties must submit their responses by the deadline of November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 24 hours ago

DEADLINE

Supply of Water Closets (NSN 4510015608924)This subcontract, issued by the Department of Defense for the DDSP New Cumberland Facility, requires the procurement and delivery of five water closets meeting NSN 4510015608924 specifications. The selected provider must ensure all units are packaged according to RP001 DLA Packaging Requirements for Procurement and delivered to the designated government location in New Cumberland, Pennsylvania, following DIBBS system requirements. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 336612. Interested parties must adhere to the response deadline of November 9, 2026, to provide the necessary supplies for prime contractors supporting DLA Troop Support contracts.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 24 hours ago

DEADLINE

Solicitation # SPE7M4-27-T-1946

Solicitation SPE7M4-27-T-1946 is a small business set-aside fixed-price contract issued by the DLA Weapons Support Fluid Handling Division for the procurement of one marine hatch, identified by NSN 2040-01-655-3226. The required delivery date is October 23, 2026, with a delivery window of 10 days after receipt of order. The item is to be shipped to the 0553 CS BN CO A Composite AWCF SSF at Fort Hood, Texas. Inspection and acceptance will take place at the destination. The contractor must adhere to strict packaging and marking standards, including ASTM D3951, MIL-STD-129, and DLA packaging requirements RP001. Environmental compliance is mandatory, specifically the prohibition of Class I ozone-depleting chemicals. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses regarding cybersecurity, the Buy American Act, and the prohibition of covered defense telecommunications equipment. Quotations for this requirement were due by November 9, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 24 hours ago

DEADLINE

DOG, DOOR, MARINE

Solicitation # SPE7M4-27-T-1957

Solicitation SPE7M4-27-T-1957 is a small business set-aside issued by the DLA Weapons Support Fluid Handling Division for the procurement of one marine door dog, identified by NSN 2040-01-649-3701 and part number 124-7386935 (53711) PC 51. The requirement specifies a delivery lead time of 20 days after order, with the destination for inspection and acceptance being the USS Ronald Reagan CVN 76 in FPO AP 96616. The award may be processed via automated award, and a price evaluation preference is provided for HUBZone small business concerns. The contractor must adhere to strict quality and security standards, including a manufacturer inspection system compliant with SAE AS9003 or ISO 9001. The use of additive manufacturing is prohibited unless specifically authorized. Security requirements include CMMC Level 2 certification and compliance with DFARS 252.204-7012 for safeguarding covered defense information. Additionally, the item is subject to export controls under ITAR or EAR, requiring the contractor to have an approved US/Canada Joint Certification Program certification. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, and all invoicing must be processed through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 24 hours ago

DEADLINE

Manufacture of Cable Assembly AB and Cable TC9007-2This subcontract through the Department of Defense and DLA Mechanicsburg involves the manufacture of custom cable assemblies for prime contractors supporting Naval Surface Warfare Center projects. The scope of work specifically requires the fabrication of Cable Assembly AB and Cable TC9007-2 in strict accordance with drawings 8290958 and 8290586 under CAGE 53711. The contractor must maintain rigorous compliance with Department of Defense item unique identification reporting and DODISS standards. Additionally, the provider must demonstrate the capability to manage NOFORN specifications via DD Form 1425 to ensure the secure handling of sensitive information throughout the delivery of the completed assemblies.

SPRMM1 DLA Mechanicsburg

POSTED

DEADLINE

in about 1 month

Manufacture and Supply of Check Valves (NIIN 016579547)This subcontract involves the manufacture and supply of 18 check valves (NIIN 016579547) for prime contractors supporting U.S. Navy NAVSUP projects. The contractor is responsible for fabricating the units according to Cage Code 34228 design 8590952-D1217483 and Technical Data Package Version 005, utilizing precision machining to ensure all specific tolerances are met. The agreement requires strict adherence to regulatory standards, including Buy American compliance and the provision of MSDS documentation per OSHA and FED STD 313. Additionally, the contractor must obtain source approval as outlined in the NAVSUP Philadelphia brochure. This project is managed under the Department of Defense via the Navsup Weapon Systems Support Mech agency.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

TORQUE ASSIST ASSEM

Solicitation # N0010426QYA3Y

Solicitation NO0104-26-Q-YA3Y is a fixed-price requirement issued by NAVSUP Weapon Systems Support Mech for the teardown, evaluation, repair, and potential modification of the Torque Assist Assembly (NSN 7HH 2040-01-088-4976). The project is tied to the FY26 S&OP project with a planned award in FY27. The government intends to make a single award based on a trade-off where past performance is considered more important than price. Evaluation of past performance will utilize the DoD Supplier Performance Risk System (SPRS) color ratings. The contractor must adhere to strict quality and technical standards, including MIL-STD-130 for marking, MIL-STD-2073 for packaging, and ANSI/ESD S20.20 for electrostatic discharge control. A critical requirement is the total absence of metallic mercury in the supplied materials. Performance is measured by the Repair Turnaround Time (RTAT), calculated from the physical receipt of the asset in the Commercial Asset Visibility (CAV) system to the date of government acceptance. Government Source Inspection (GSI) is required, and all freight is handled as FOB Origin. Invoicing and receiving reports must be processed electronically through the Wide Area Workflow (WAWF) system. The extended deadline for quote submission is December 4, 2026, at 4:30 PM local time.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

in about 1 month

SEGMENT #7 STERN

Solicitation # N0010427QLA16

Solicitation N00104-27-Q-LA16 is a Request for Quotation issued by NAVSUP Weapon Systems Support Mechanicsburg for the manufacture and delivery of one Segment #7 Stern (NSN 1940-01-676-6351). The item must be produced according to design reference Cage Code 66618 and comply with physical identification standards MIL-STD-130, Rev N. Delivery is required within 30 days of award, though accelerated delivery is encouraged, with shipping terms set as FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. Government source inspection is mandatory, and both inspection and acceptance will occur at the point of origin. The government will utilize a trade-off process for award, prioritizing past performance over price. Offerors must be authorized distributors of the original manufacturer to be considered. Technical requirements include strict adherence to MIL-STD-2073 for packaging and MIL-STD-129 for marking. The contract incorporates various federal regulations, including Buy American and Balance of Payments programs, and requires the use of Wide Area WorkFlow (WAWF) for invoicing and receiving reports. All proposals must be submitted by November 27, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Solicitation # N0010426QYAJZ

Solicitation N00104-26-Q-YAJZ is a competitive, fixed-price procurement for the manufacture of Gland Actuators (NSN 2040-01-093-7730) for use on Navy submarines. The requirement is categorized under NAICS code 336612 with a small business size standard of 1,000. Award will be made to the eligible, responsible offeror with the lowest price technically acceptable (LPTA) quote, though the government may consider past performance as a higher priority than price when determining the most advantageous offer. Technical requirements specify that the actuators must be manufactured from Nickel-Aluminum-Bronze per ASTM B150/B150M and adhere to drawing 4398602. The contract mandates strict quality assurance, including a mandatory first article testing and inspection process and the submission of a Quality Inspection and Test Plan for government approval. All supplied materials must be mercury-free, and the contractor must provide comprehensive objective quality evidence, including certified mill certifications and nondestructive testing reports. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for invoicing and receiving reports. Packaging and marking must comply with MIL-STD-2073-1 and MIL-STD-129, with specific requirements for domestic and overseas shipping levels. The contractor is responsible for all inspections at the origin, with final acceptance conducted by the cognizant DCMA-QAR in coordination with the Naval Surface Warfare Center, Philadelphia Division.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

More opportunities from Department Of The Navy → Navsup Weapon Systems Support Mech

Same awarding agency

Manufacture and Supply of Duplex Ball Bearings

Food Product Machinery Manufacturing

POSTED

about 13 hours ago

DEADLINE

in about 1 month

MIL-SPEC Packaging and Labeling Services

Marking Device Manufacturing

POSTED

about 13 hours ago

DEADLINE

Display Unit Repair and Modification Services

Computer and Office Machine Repair and Maintenance

POSTED

about 13 hours ago

DEADLINE

Keyboard Component Supplier

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 13 hours ago

DEADLINE

Keyboard Assembly Repair and Overhaul

Other Electronic and Precision Equipment Repair and Maintenance

POSTED

about 13 hours ago

DEADLINE

HMI Panel Component Supply

Other Electronic Parts and Equipment Merchant Wholesalers

POSTED

about 13 hours ago

DEADLINE

in about 1 month

Upper HMI Panel Assembly Repair & Overhaul

Electronic and Precision Equipment Repair and Maintenance

POSTED

about 13 hours ago

DEADLINE

in about 1 month

BEARING,BALL,ANNULA — 3110009910915 — N0010426QYAHA

Solicitation # N0010426QYAHA

This contract is a total small business set-aside for the manufacture and procurement of annular and duplex ball bearings, specifically part number M17931-G043, adhering to MIL-B-17931 for quiet operation. The scope includes the production of these precision components, which are designated as source control items, meaning only Government-approved sources may be considered for award. The procurement is a DO-rated order, emphasizing its priority for national defense. Key technical requirements include strict adherence to mercury-free standards to prevent corrosion and toxicity in submarine and surface ship environments, as well as specific packaging requirements for matched bearing pairs to ensure they are not separated. Quality assurance is a critical component of this contract, requiring the contractor to maintain an inspection system compliant with MIL-I-45208 or ISO 9001/9002. The process involves a two-tier verification system: a contractor-led quality conformance inspection and a subsequent government-led production lot test consisting of non-destructive testing at the Naval Surface Warfare Center, Carderock Division. Award will be based on the most advantageous offer, with past performance weighted more heavily than price. Deliveries are handled as F.O.B. origin, with electronic invoicing and payment processed through the Wide Area WorkFlow system.

Ball and Roller Bearing Manufacturing

POSTED

about 13 hours ago

DEADLINE

in about 1 month

POWER SUPPLY — 6130015353578 — N0010427QYA53

Solicitation # N0010427QYA53

Solicitation N00104-27-Q-YA53 is a Request for Quotations issued by the NAVSUP Weapon System Support (NAVSUP WSS) for the repair of 17 power supply units, identified by NSN 6130-01-535-3578 and Part Number 600-42010. The scope of work involves the teardown, evaluation, repair, and modification of these units to meet the operational and functional requirements of CAGE 04801. The requirement is pursued under Emergency Acquisition Flexibilities and is DO certified for national defense under the Defense Priorities and Allocations System. Delivery is required within 30 days, with FOB Destination terms. Key requirements for offerors include mandatory Government source approval prior to award and the provision of a signed letter of authorization if the offeror is not the Original Equipment Manufacturer. The contract mandates strict adherence to quality standards, including ISO 9001 and MIL-STD-130 for identification, and requires that materials be mercury-free. Packaging must comply with MIL-STD-2073 and MIL-STD-129, with specific requirements for DLR labels and palletization. Invoicing and receiving reports must be processed electronically through the Wide Area Workflow (WAWF) system. Evaluation of quotes will be based on the Supplier Performance Risk System (SPRS), assessing item, price, and supplier risk.

POSTED

about 13 hours ago

DEADLINE

in about 1 month

BEARING,BALL,DUPLEX — 3110009921019 — N0010426QYA9Y

Solicitation # N0010426QYA9Y

This contract is a solicitation for the manufacture and delivery of duplex ball bearings, specifically part number M17931-A023, adhering to the MIL-DTL-17931F military specification for quiet operation. The procurement is restricted to Government-approved sources, and new suppliers must undergo an extensive qualification process, including the use of the QTP-MIL-B-17931 test plan. Key technical requirements include a strict prohibition of metallic mercury to prevent corrosion in submarine and surface ship systems, and specific packaging mandates for matched bearing pairs according to MIL-DTL-197 method 40B. The items carry a 60-month extendable shelf life, with certain versions labeled for 120 months. Quality assurance is a critical component of this contract, requiring the contractor to maintain an inspection system compliant with MIL-I-45208 or ISO 9001/9002. The process involves both contractor-led quality conformance inspections and Government-led nondestructive verification testing conducted at the Naval Surface Warfare Center, Carderock Division. Award will be made to a single, technically acceptable offeror based on a trade-off between price and past performance, with past performance weighted as more important than price. Delivery is expected within 180 days, and the contract incorporates various FAR and DFARS clauses, including Buy American and safeguarding of covered defense information.

Ball and Roller Bearing Manufacturing

POSTED

about 13 hours ago

DEADLINE

in about 1 month

DISPLAY UNIT — 7025015054147 — N0010427QSA09

Solicitation # N0010427QSA09

Solicitation N00104-27-Q-SA09 is a fixed-price contract issued by the Department of the Navy, Navsup Weapon Systems Support Mech, for the teardown, evaluation, repair, and potential modification of ten display units (NIIN: 015054147). The contract includes an option for an additional quantity up to 100 percent of the base amount. The government requires a repair turnaround time of 176 days from receipt to acceptance, with mandatory transaction reporting via the Commercial Asset Visibility Repairables Portal within five business days of receipt. Award will be made to a single, technically acceptable offeror based on a best-value determination where past performance is weighted more heavily than price. The contractor is responsible for all inspection and testing according to original manufacturer specifications, with final acceptance and government source inspection conducted at the contractor's location. Strict adherence to military standards is required, including MIL-STD-130 for physical identification, MIL-STD-129 for marking, and MIL-STD-2073-1 for packaging. All shipments are FOB Origin, and electronic invoicing must be processed through the Wide Area Workflow system. Additionally, the contractor must comply with cybersecurity requirements under DFARS 252.204-7012 and provide Material Safety Data Sheets for any hazardous materials delivered.

Electronic and Precision Equipment Repair and Maintenance

POSTED

about 13 hours ago

DEADLINE

ASSEMBLY, KEYBOARD — 7025016523156 — N0010426QYAF1

Solicitation # N0010426QYAF1

Solicitation N00104-26-Q-YAF1 is a fixed-price contract issued by the Navsup Weapon Systems Support Mech for the repair of one Keyboard Assembly (NSN 7025-01-652-3156). The scope requires all repair work to be performed according to contractor standard practices and original manufacturer specifications, ensuring the assembly meets the operational requirements of Cage Code 03538 and Reference Number 77C734830G1. A critical requirement is that the material must be mercury-free, as it is intended for use on submarines or surface ships. Delivery is required within 38 days, FOB Destination, with packaging and marking adhering to MIL-STD-2073-1, MIL-STD-129, and MIL-STD-130. Award will be granted to the responsible offeror submitting the lowest priced, technically acceptable offer, with evaluations utilizing the Supplier Performance Risk System to assess item, price, and supplier risk. The contractor is responsible for all inspection and testing, though the government reserves the right to perform its own inspections. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses, including those regarding cybersecurity, hazardous material identification, and the prohibition of certain Chinese military companies. Offerors who are not the Original Equipment Manufacturer must provide a signed letter of authorization on the OEM's letterhead to be considered.

Electronic and Precision Equipment Repair and Maintenance

POSTED

about 13 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS