Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Supply of Class II Steam Traps

Active

Federal

Response Deadline09/10/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract through the Fluid Handling Division of the Department of Defense involves the supply of nine Class II steam traps for prime contractors supporting DLA supply contracts. The required units must be angle pattern traps with a 1/2 inch nominal pipe size, a working pressure of 100 PSI, and a water capacity of 2,600 lbs/hr, adhering to MIL-DTL-2118D and TDP Rev A Gen 2 specifications. All materials must be mercury-free according to IP056, and packaging must comply with RP001 and MIL-STD-2073-1E standards. The delivery is set as FOB Origin to DLA Distribution San Joaquin in Tracy, California. The response deadline for this opportunity is September 10, 2026.

General Info

Supply nine Class II steam traps to DoD by September 10, 2026.

Agency

Department Of Defense → FLUID HANDLING DIVISIONView Agency

NAICS

221330 - Steam and Air-Conditioning SupplyView NAICS

Place of Performance

TRACY, CA, 95304-5000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7M3-26-T-8723.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

TRAP, STEAM

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 30

subcontract

Response DeadlineSep 10

Submission deadline

Response Deadline

09/10/2026, 05:00:00 PM UTCin 5 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FLUID HANDLING DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → FLUID HANDLING DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies Class II steam traps for prime contractors delivering DLA supply contracts. Manufactures or sources angle pattern traps with 1/2 inch nominal pipe size, 100 PSI working pressure, and 2,600 lbs/hr water capacity per MIL-DTL-2118D and TDP Rev A Gen 2. Ensures materials are mercury-free per IP056 and packaging complies with RP001 and MIL-STD-2073-1E. Delivers 9 units FOB Origin to DLA Distribution San Joaquin.

Similar Contracts

Same NAICS industry code

Supply of Steam Table Pan Covers (NSN 7310-00-834-4480)

SUBSISTENCE FSE SUPPLY CHAIN

POSTED

DEADLINE

Supply of Hexagon Head Cap ScrewsThis subcontract with the Defense Logistics Agency involves the supply of three specialized hexagon head cap screws for prime contractors on DLA Aviation ASC projects. The contractor is responsible for manufacturing or sourcing fasteners that strictly adhere to NSN 5305-01-677-5734 specifications, with delivery handled as FOB Origin. Quality assurance and compliance are managed through sampling per MIL-STD-1916 or ASQ H1331, while packaging and marking must follow MIL-STD-2073-1E and MIL-STD-129. Additionally, the provider must supply a Certificate of Conformance in accordance with FAR 52.246-15.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Non-Immersion Electrical Heating Elements

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Supply of Check Valve (NSN 4820-01-477-2817)This subcontract with the Department of Defense Maritime Supply Chain involves the procurement or manufacture of one Check Valve meeting NSN 4820-01-477-2817 specifications for prime contractors on DLA Land and Maritime supply contracts. The selected provider must ensure all packaging and marking adhere to MIL-STD-129 and comply with the DLA Master List of Technical and Quality Requirements RA001. Additionally, the provider is responsible for removing government identification from any non-accepted supplies in accordance with RQ011. The contract requires the delivery of the completed Check Valve within five days after the order is placed. This opportunity falls under NAICS code 221330 and was posted on September 1, 2026, with a response deadline of September 14, 2026.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Gaylord Ventilator Supply for USS SPRUANCE (DDG-111)

Southwest Regional Maintenance Center

POSTED

DEADLINE

FILTER ELEMENT, AIR

Solicitation # SPE86-26-T-5359

This contract, identified as solicitation SPE8E8-26-T-5359, is issued by the Defense Logistics Agency for the procurement of one air filter element, part number 124751-498 from Falls Filtration Technologies, Inc. The item is identified by NSN 4130-01-623-9976 and is destined for the USS Essex LHD 2. Delivery is required within 20 days after receipt of order, with FOB destination serving as both the inspection and acceptance point. The procurement is subject to specific technical and quality requirements, including DLA packaging standards and the removal of government identification from non-accepted supplies. There is a strict prohibition against the intentional addition of mercury or mercury-containing compounds, with limited exceptions for functional components as specified by NAVSEA. Shipping must be conducted via the fastest traceable means, avoiding parcel post, and must comply with MIL-STD-129 marking and MIL-STD-2073-1E packaging data.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Solenoid Valves (NSN 4810011881787)

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Supply of Winch Control Stations (NSN 2590-01-217-8317)This subcontract involves the manufacture and supply of 24 winch control stations for prime contractors under the Department of Defense, specifically the Land Supplier Opns Vehicle Spt agency. The hardware must be produced or sourced in strict accordance with NSN 2590-01-217-8317, TDP Rev B Gen 2, and NASM35649 standards. The contractor is responsible for adhering to the DLA Master List of Technical and Quality Requirements (RA001) and performing packaging according to RP001. Additionally, all hazardous material labeling must comply with 29 CFR 1910.1200. The place of performance is located in Texarkana, Texas, with a response deadline of September 8, 2026.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Water Treatment Services for Boilers, Chillers, and Cooling Towers

Solicitation # 44DOC-S3955

The Nevada Department of Corrections, through the Nevada Purchasing Division, is seeking proposals from qualified and licensed contractors to provide comprehensive chemical water treatment services. The scope of work involves managing boilers, cooling towers, chillers, and related systems across various department facilities. To be eligible, contractors must hold appropriate licensing from the Nevada State Contractors' Board. This solicitation, identified by number 44DOC-S3955, was posted on August 20, 2026, with a formal response deadline set for October 8, 2026. The contract is managed by the Department of Corrections based in Carson City, Nevada. Interested parties can direct inquiries to the designated purchaser or the administration office to ensure compliance with the procurement process.

440 - Department of Corrections

POSTED

DEADLINE

in about 1 month

Adoption of Sewer Charges for Fiscal Year 20262027 for Parcels with Sewer-Only ServiceThe Western Municipal Water District has adopted Resolution No. 3392 to establish sewer service charges for Fiscal Year 2026–2027. This action specifically targets parcels of real property located in the Cities of Riverside and Corona that receive sewer service but do not receive water service from the district. The primary purpose of these charges is to fund the ongoing operation, maintenance, and capital renewal of the existing sewer system, with the explicit condition that funds will not be used for infrastructure expansion. Administrative oversight is managed by Veronica Zheng, Director of Finance, and the charges are collected through the Riverside County tax roll. The action is statutorily exempt from the California Environmental Quality Act under Public Resources Code section 21080(b)(8) and CEQA Guidelines section 15273. This is a regulatory and fiscal measure rather than a competitive procurement process, and as such, it does not contain standard federal acquisition clauses, evaluation factors, or traditional contract pricing structures.

Western Municipal Water District

POSTED

about 1 month ago

DEADLINE

Operation & Maintenance of Granular Activated Carbon (GAC) VesselsThe contract involves the routine operation, monitoring, and maintenance of two Granular Activated Carbon (GAC) vessels dedicated to removing 1,2,3-trichloropropane (1,2,3-TCP) from the water supply, ensuring consistent compliance with state drinking water standards. This work is critical for safeguarding public health by effectively reducing harmful contaminant levels in the water delivered to the community in Delano, California, with the place of performance specifically located at 93215. The activities encompass continuous system checks, media replacement schedules, performance evaluations, and regulatory reporting to uphold operational integrity and adherence to environmental and water quality regulations. This subcontract is issued under the authority of the California State Water Resources Control Board, reflecting state-level oversight of drinking water treatment infrastructure. The North American Industry Classification System code 221330 indicates the nature of the work falls under water transportation and treatment services. The contract was posted on July 24, 2026, and is tied to a specific project identified in the California Environmental Quality Act database, underscoring its role in addressing long-term water quality concerns tied to legacy groundwater contamination. While no set-aside provisions or specific organizational requirements are detailed, the scope demands technical expertise in GAC system management and a commitment to stringent compliance protocols.

State Water Resources Control Board

POSTED

about 1 month ago

DEADLINE

Public Utilities and Infrastructure Continuity PlanningThe contract focuses on ensuring the uninterrupted delivery of essential public utility services—including water, wastewater, solid waste, and emergency response—following the incorporation of a new municipal entity. The primary objective is to assess the current state of these services and develop a detailed plan for their seamless transition to the newly formed jurisdiction, minimizing disruption to residents and operations. This involves evaluating infrastructure capacity, operational protocols, staffing needs, regulatory compliance, and intergovernmental coordination required to maintain service standards during and after the incorporation process. The work is scoped to include comprehensive analysis of existing systems, identification of potential gaps or risks in service continuity, and the formulation of actionable strategies for transferring responsibilities, assets, and personnel. The place of performance is designated as the 95762 ZIP code area, indicating the project is centered in El Dorado Hills, California, under the oversight of the El Dorado Hills Community Services District. The contract falls under NAICS code 221330, classifying it as water, sewage, and other systems infrastructure planning, and is structured as a subcontract to support the district’s broader transition goals. All planning efforts must align with state and local requirements to guarantee long-term operational resilience and public safety.

El Dorado Hills Community Services District

POSTED

about 2 months ago

DEADLINE

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

Supply of Metallic Tube and Fittings (Part 4710-01-261-4612)This subcontract, issued by the Department of Defense Fluid Handling Division, involves the supply of two units of metallic tube and fitting assemblies, specifically part number 4710-01-261-4612. The contractor is responsible for manufacturing or sourcing these components while ensuring strict adherence to ASTM D3951 for packaging and MIL-STD-129 for marking and labeling. To qualify for inspection and acceptance, the provider must maintain a valid CAGE code and comply with the Buy American Act. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332999. Interested parties must respond by September 9, 2026, to support prime contractors on DLA supply contracts.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Supply of Ring Spacers (NSN 5365010546511)

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

Pressure and Temperature Relief Valve Supply

Industrial Valve Manufacturing

POSTED

DEADLINE

Military-Grade Packaging and Palletization

Freight Transportation Arrangement

POSTED

DEADLINE

Plastic Part Fabrication (NSN 005551845)

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

DEADLINE

Nonmetallic Hose Assembly SupplierThis subcontract involves the supply of 25 nonmetallic hose assemblies for prime contractors under the Department of Defense Fluid Handling Division. The supplier is responsible for manufacturing or sourcing assemblies that meet NSN 4720016123357 specifications, ensuring all items are physically identified and marked according to RQ017 and RQ011 standards. All deliverables must be packaged in accordance with DLA Packaging Requirements for Procurement RP001. The contract falls under NAICS code 326220 and specifies the place of performance in Tracy, California, with a response deadline of September 14, 2026.

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

DEADLINE

Nonmetallic Hose Assembly Manufacturer/Supplier

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

DEADLINE

U.S.-Flag Ocean Freight Transport

Support Activities for Rail Transportation

POSTED

DEADLINE

Supply of Meggitt Defense Systems Part 50249-1

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Supply of Critical Application O-Rings (MS28775-106)

Plastics Material and Resin Manufacturing

POSTED

DEADLINE

Supply of Valve Overhaul Kits (NSN 4820011879890)

Industrial Valve Manufacturing

POSTED

DEADLINE

DLA Compliant Packaging and Shipping Services

Packaging and Labeling Services

POSTED

DEADLINE