Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Supply of COTS Radio Power Divider (NSN 5895-01-731-1364)

Active

Federal

Response Deadline07/24/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract seeks the supply of three commercial off-the-shelf units comprising Divider, Power, and Radio components, all of which must meet military-grade packaging, labeling, and delivery specifications. The items are identified by the National Stock Number 5895-01-731-1364 and are required to comply fully with defense standards for ruggedization, documentation, and handling. The procurement is structured as a subcontract under NAICS code 334290, indicating it falls within the broader category of other electronic component manufacturing. Performance is to be delivered to New Cumberland, Pennsylvania, with a zip code of 17070-5002, and the contract opportunity was posted on July 16, 2026, with a response deadline of July 24, 2026. The agency managing the procurement is the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense, and the solicitation is accessible through the DIBBS system.

General Info

Supply three military-grade COTS units to New Cumberland, PA, by July 24, 2026, under DOD subcontract.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

334290 - Other Communications Equipment ManufacturingView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 16

subcontract

Response DeadlineJul 24

Submission deadline

Response Deadline

07/24/2026, 05:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of three commercial off-the-shelf Divider, Power, Radio units compliant with military packaging, labeling, and delivery standards.

Similar Contracts

Same NAICS industry code

Request for Proposals for PON Network EquipmentGolden State Fiber is soliciting proposals for the supply of Passive Optical Network equipment through RFP 2026-GSCA-RFP-002, issued on July 17, 2026, with a firm deadline for submissions on August 20, 2026, at 6:59 a.m. Pacific Time. The procurement is a competitive, transparent process open to qualified vendors, with the potential to award contracts to one or more responders based on evaluation criteria detailed in the RFP. All submitted proposals will be made public after the close of the submission period, and participants are advised to review confidentiality guidelines carefully before submitting sensitive information. Questions must be submitted exclusively through the Procurement Portal’s Question and Answer feature, and all responses will be shared uniformly with applicants to ensure fairness. Proposals received after the deadline will not be considered, and submissions must be completed via the designated online portal. The solicitation is managed by the California Department of Finance and Administration, with the primary point of contact being Shayne Pope, Outside Plant Construction Management Lead, reachable at 209-300-4641 or spope@goldenstateconnect.org, and secondary support provided by Marc Rotteveel, Project Accountant, at 916-447-4806 or mrotteveel@rcrcnet.org. The contract is classified under a SLED government entity type, and while no NAICS code or set-aside designation is specified, the equipment will be deployed across California, with the issuing agency headquartered in Sacramento. Interested parties are directed to the portal link for all submission and communication needs, and compliance with procedural requirements is mandatory for consideration.

Finance and Administration

POSTED

about 11 hours ago

DEADLINE

in about 1 month

Fuel Cell Quantity Gage Supply

Defense Logistics Agency

POSTED

about 16 hours ago

DEADLINE

MOUNT, GIMBALThe contract pertains to the procurement of six MOUNT, GIMBAL units identified by NSN 5895-01-647-6415 and part number RF-5940-MT004 from L3HARRIS TECHNOLOGIES, INC., with delivery required within five days of shipment to the Franklin USARC facility in Franklin, Pennsylvania. All items must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, including adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with no special marking required. Packaging must follow DLA-specific procurement guidelines and be palletized accordingly, with no tolerance for quantity variance. The items are designated as a critical application item and must not contain intentional mercury or mercury compounds except under specific exceptions for functional components such as batteries or sensors, with additional containment requirements for portable devices. Sampling and inspection follow MIL-STD-1916 or ASQ H1331, with zero non-conformances mandated unless otherwise stated, and acceptance occurs at the destination point. Shipping must utilize the fastest traceable means, excluding parcel post, and is FOB origin. The supplier must also comply with documentation requirements for source approval and handle covered defense information in accordance with applicable protocols. The original required delivery date is April 29, 2026, and the contract is issued under solicitation SPE4A7-26-T-536B with a North American Industry Classification System code of 334290.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 16 hours ago

DEADLINE

CASE, ELECTRONIC COMThis contract is for one unit of a commercial off-the-shelf electronic case, part number 4526411 with NSN 5895-01-700-0459, sourced from Teledyne Flir Unmanned Ground Systems, under solicitation SPE4A0-26-T-3385. The item must be delivered within five days of contract award to Fort Leonard Wood, Missouri, with FOB origin terms and zero variance in quantity. Inspection and acceptance occur at the destination. All packaging must comply with ASTM D3951 and be marked and labeled per MIL-STD-129, with palletization following DLA’s specific procurement packaging requirements, and the DLA Master List of Technical and Quality Requirements superseding any conflicting standards. The item is classified as a COTS product and subject to cybersecurity maturity model certification Level 2 self-assessment. The shipment must be sent via a traceable method, excluding parcel post, and directed to the specified freight address and mark-for location at Fort Leonard Wood. The shipment type is RDD with NMCS designation, and the required delivery date is April 24, 2026. The contract includes specific government use codes and identifiers, and the unit of issue is each (EA) as defined by DoD standards. The point of contact for inquiries is Justin Bryant-Kresser, and the solicitation response deadline is July 22, 2026, with the document posted on July 17, 2026. All terms are governed by the DLA acquisition framework and require strict adherence to labeling, delivery, and cybersecurity compliance protocols.

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 16 hours ago

DEADLINE

6350--CLC / Wander Guard System

260-NETWORK Contract Office 20 (36C260)

POSTED

about 21 hours ago

DEADLINE

MODEM,COMMUNICATIONThis contract pertains to the procurement of a MODEM, COMMUNICATION under solicitation SPRMM126QHD32, issued by the Defense Logistics Agency (DLA) Mechanicsburg through the SPRMM1 office. The solicitation has been extended to a response deadline of August 7, 2026, with a total quantity requirement of seven units. Award will be made using the Lowest Price Technically Acceptable (LPTA) evaluation method, ensuring that proposals meet all technical requirements at the lowest cost. The contractor must supply the item according to specified CAGE codes and reference numbers, with strict adherence to MIL-STD-130 Rev N for marking and MIL-STD-2073 for packaging. Any design, material, or part number changes require prior written approval from the NAVICP-MECH Contracting Officer, categorized under specific change codes with documentation required for evaluation. The contractor is fully responsible for inspection and quality assurance throughout production and must maintain inspection records for 365 days after final delivery. All contractual documents are considered issued upon electronic transmission, and performance must occur at the specified production facility unless a formal, cost-covered change is approved. The contractor must be an authorized distributor of the original equipment manufacturer and provide proof of authorization with the offer. Technical data is not provided, and inspection of materials will occur at the source, with final acceptance at the designated location. Compliance with cybersecurity maturity model certification, Federal Acquisition Supply Chain Security Act prohibitions, and mandatory use of WAWF for electronic invoice and receiving report submission is required. Contractors must register for the PIEE EDA portal to access orders and updates, and are strongly encouraged to enroll in NAVSUP WSS notification services. Distribution of government-provided documents is governed by specific distribution statement codes, with controls on further dissemination based on sensitivity. Failure to comply with any requirement, including OEM disclosure, packaging, marking, or electronic submission protocols, may result in disqualification or non-acceptance of the offer.

SPRMM1 DLA Mechanicsburg

POSTED

about 21 hours ago

DEADLINE

PANEL,CONTROL, ELECT - RFPThe Government is seeking to acquire twenty-four PANEL, CONTROL, ELECT units, NSN 5895-01-721-1771 with part number 13748140, under a firm-fixed price single purchase contract for use on the IBAS Weapon System. This requirement is strictly limited to two sole-source manufacturers, THOMAS GLOBAL with CAGE code 6ZT04 and PALOMAR with CAGE code 1CWA3, due to insufficient technical data and lack of rights to reprocurement information from alternative sources. The production lead time is 135 days after contract award for all twenty-four units, with delivery required to Tobyhanna, PA 18466-5059. This acquisition is subject to strict export controls under the Arms Export Control Act and the Export Administration Act, prohibiting any release of technical data outside the United States without prior government approval. All offerors and their supply sources must hold an active United States/Canada Joint Certification Program certification to access controlled information, and delays in award will not be granted to accommodate incomplete certifications. Communication for solicitation requests must be directed exclusively via email to Cheyenne Wright at Cheyenne.Wright@dla.mil, including name, company name, CAGE code, and telephone number; no telephone inquiries will be accepted. Foreign firms must route requests through their respective embassies. While current efforts are underway to secure data rights that may enable future competition, this procurement remains restricted to the sole-source suppliers for now. The solicitation closes on July 10, 2026, and is posted under SPRRA2-26-R-0086 with NAICS code 334290 under the Department of Defense, Office of DLA Aviation at Redstone Arsenal, Alabama.

Al DLA Aviation At Huntsville

POSTED

about 21 hours ago

DEADLINE

in about 1 month

Sources Sought Kingfisher Radio Alarm TransmitterThe Naval Facilities Engineering Systems Command, Pacific is seeking to identify alternative sources capable of supplying a fire alarm radio transmitter that meets the exact performance specifications of the Kingfisher KFRA-C Emergency Alarm Receiver system currently in use at Pearl Harbor Naval Shipyard and Joint Base Pearl Harbor-Hickam. The required device must be listed or approved by a Nationally Recognized Testing Laboratory recognized by OSHA and must operate seamlessly with the existing Factory Mutual Laboratories Approved Kingfisher receiver. It must also comply with the narrowband radio communication standards outlined in the National Telecommunications and Information Administration’s Federal Frequency Management manual. This notice is strictly for market research and does not constitute a solicitation for bids or proposals. Respondents must submit comprehensive technical data demonstrating full compatibility with the existing system; company brochures will not be accepted. Any submissions must be received electronically by Annette Tijerina no later than 30 July 2026 at 2:00 p.m. H.S.T., and all information provided becomes the property of the U.S. Government. Incomplete or vague responses will be disregarded, and submissions after the deadline will not be considered. This action is taken under FAR 15.201(e), and no binding contract will result from responses to this notice.

Navfacsyscom Pacific

POSTED

about 21 hours ago

DEADLINE

Electronic Hardware Kit Supply and AssemblyThe contract entails the procurement or manufacturing of components and the full assembly of an electronic hardware kit designated by NSN 5340-00-872-0254, ensuring strict adherence to technical specifications and quality standards set by the Defense Logistics Agency. All work must be completed in compliance with Department of Defense requirements, with performance focused at the designated location in New Cumberland, Pennsylvania, ZIP 17070-5002. This is a subcontract opportunity reserved exclusively for small businesses under a Total Small Business Set-Aside as defined by FAR 19.5, with the NAICS code 334290 classifying the activity under Other Electronic Component Manufacturing. The solicitation was posted on July 16, 2026, and responses are due by July 27, 2026, with bidders expected to meet all contractual obligations related to sourcing, fabrication, and final assembly of the kit.

LAND SUPPLY CHAIN

POSTED

DEADLINE

TELEPHONE, SECURE UNThe contract requires the procurement of 45 units of a secure telephone, NSN 5810-20-010-8673, under solicitation SPE4A7-26-T-576F, with delivery due 162 days after contract award to the DDSP New Cumberland facility in Pennsylvania. All items must be furnished FOB origin, inspected and accepted at destination, with zero tolerance for quantity variance. Packaging must comply with MIL-STD-2073-1E, including mercury-free certified materials per NAVSEA 5100-003D, and palletization must follow DLA’s RP001 packaging requirements. Marking and labeling are governed by MIL-STD-129, with no special marking required beyond the NSN and purchase request number. Sampling for acceptance shall adhere to MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances allowed unless otherwise specified, and attributes not otherwise classified are treated as major. Mercury or mercury-containing compounds are prohibited in all hardware and packaging except for specific functional applications such as batteries, fluorescent lamps, sensors, or weapon systems, and any portable mercury-containing devices must be shockproof with dual containment. The contractor must certify all packaging as mercury-free and comply with hazardous material labeling under 252.223-7001 and 252.223-3, including submission of Safety Data Sheets prior to award. Cybersecurity compliance is mandatory with implementation of NIST SP 800-171 controls to protect covered defense information, mandatory reporting of cyber incidents within 72 hours, and submission of a self-assessment per 252.240-7997. The contractor is also prohibited from using telecommunications equipment from designated foreign vendors under 252.204-7018. All ocean shipments require use of U.S.-flag vessels under 252.247-7023, with exceptions requiring prior approval. The contractor must affirm representations regarding small business status, UEI, and CAGE code, and ensure compliance with employment eligibility verification, equal opportunity, trafficking in persons, and whistleblower protection clauses. Payment must be processed via WAWF using the specified invoice types, and all submissions must be made electronically through DIBBS by the deadline of July 24, 2026

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

DIVIDER, POWER, RADIOThe contract mandates the supply of one divider, power, radio with NSN 5895-01-623-3377 under solicitation SPE4A7-26-T-576D, requiring delivery within five days FOB origin to a designated DLA facility in Barstow, California. The item must fully comply with all technical and quality requirements referenced by R or I numbers in the DLA Master List of Technical and Quality Requirements, which supersede any other standards including ASTM D3951. Packaging and labeling must adhere strictly to MIL-STD-129 and DLA packaging guidelines, with palletization following RP001, and no use of parcel post permitted—shipment must occur via traceable freight methods. Sampling inspection follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively. Any configuration changes require an engineering change proposal or variance request, and government identification must not be removed from non-accepted supplies. The unit of issue is each, with a strict zero percent variance allowed on quantity, and inspection and acceptance occur at destination. The required delivery date is July 14, 2026, with a response deadline of July 24, 2026, and point of contact is Tasia Carney.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

DIVIDER, POWER, RADIOThe contract pertains to the procurement of a Divider, Power, Radio, identified by NSN 5895-01-731-1364 and part number APD3393, with a quantity of three units to be delivered within 247 days from the contract award date. The item is classified as a commercial off-the-shelf (COTS) product and must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Mercury or mercury-containing compounds are strictly prohibited in the product, its packaging, preservation, and marking, except for specific functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA; any portable fluorescent lamps or instruments containing mercury must be shockproof and include a secondary containment barrier per NAVSEA 5100-003D. Packaging must conform to MIL-STD-2073-1E with preservation method 41, dry conditioning, and use of EA wrap material; marking follows MIL-STD-129 with no special marking code required, and palletization adheres to DLA packaging standards. No mercury is permitted in preservation or packaging processes. Delivery is FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at the destination. The unit price is $3.00 per unit, with zero variance allowed in quantity. The contract was issued under solicitation SPE4A7-26-T-578L, with a response deadline of July 24, 2026, and the required ship date is March 29, 2027. All transportation and shipping details are governed by DLAD procedural notes C19 and C20.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

Quality Assurance & Inspection ServicesThe contract requires independent origin inspection and acceptance of manufactured parts to ensure full compliance with engineering drawings, technical specifications, and zero non-conformance standards. Inspectors must verify that all components meet exact quality criteria before acceptance, with no tolerance for defects or deviations. This effort is critical to maintaining the integrity of defense-related supply chains and ensuring that all delivered parts are fit for mission-critical applications. The contract is categorized as a subcontract under NAICS code 541330, associated with the Department of Defense’s ASC SUPPLIER OPER AE AND AF DIV. It was posted on July 17, 2026, with responses due by July 29, 2026. The place of performance and specific office location are not detailed, but the work is tied to defense procurement processes managed through the DIBBS system. All parties must adhere to rigorous quality controls and documentation practices to fulfill the zero non-conformance mandate.

Engineering Services

POSTED

about 16 hours ago

DEADLINE

Government Surplus Property Handling & Repackaging ServicesThe contract seeks services to inspect, validate, repack, and document surplus government property for reuse or resale, ensuring strict adherence to federal labeling standards and chain-of-custody requirements. All activities must maintain regulatory compliance throughout the handling process, with a focus on preserving the integrity and traceability of items from intake to final disposition. This includes accurate documentation and proper packaging to meet federal guidelines, enabling seamless transition of materials into secondary markets or internal reuse programs. The solicitation falls under NAICS code 493190 and is classified as a subcontract, issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The opportunity was posted on July 17, 2026, with responses due by July 29, 2026. While specific location details for performance or contact points are not provided, bidders must be prepared to support operations in alignment with DOD protocols and ensure full transparency in all handling procedures. The work is critical to maximizing the value of surplus assets while maintaining accountability across the federal supply chain.

Other Warehousing and Storage

POSTED

about 16 hours ago

DEADLINE

Precision Machining of Fuel Line ComponentsThe contract involves the precision machining of a slider block intended for use in a fuel line assembly, requiring strict adherence to military specifications, approved technical data packages, and established quality standards. The component must be manufactured to exacting tolerances to ensure reliability and performance in demanding operational environments, with all processes and materials subject to rigorous inspection and documentation protocols. This subcontract falls under NAICS code 332613, indicating it is for other machine shop services, and is being managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The solicitation was posted on July 17, 2026, with responses due by July 29, 2026, and is accessible through the DIBBS platform. There is no set-aside designation specified, meaning the contract is open to all qualified suppliers regardless of business size or status. The place of performance and point of contact details are not provided, suggesting the contractor will coordinate directly with the procuring activity to finalize logistics and deliverables. Full compliance with technical requirements and quality assurance measures is mandatory, and failure to meet these standards may result in rejection or contract termination.

Spring Manufacturing

POSTED

about 16 hours ago

DEADLINE

First Article Testing (FAT) ServicesThe contract seeks specialized First Article Testing services for a military duct assembly, requiring full compliance with Department of Defense standards, including the proper execution of tests and submission of documentation such as DD Form 250. The work must be performed by a qualified small business as this is a Total Small Business Set-Aside under FAR 19.5, classified under NAICS code 541380 for other scientific and technical consulting services. All testing activities must align with military specifications and deliverables to ensure the duct assembly meets required performance, safety, and quality benchmarks before production. The solicitation, issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, has a response deadline of July 29, 2026, and is accessible via the DIBBS platform. The place of performance and physical address details are unspecified, indicating flexibility in location, but the work must be completed in accordance with federal contract requirements. The contract structure is a subcontract, meaning the selected vendor will likely work under a prime contractor to supply certified test results and documentation critical to the military supply chain.

Testing Laboratories and Services

POSTED

about 16 hours ago

DEADLINE

Supply of Military Duct AssemblyThe contract requires the manufacture, testing, packaging, and delivery of 39 military-grade duct assemblies identified by NSN 1660-00-799-5861, all of which must adhere strictly to applicable military specifications. Each unit must undergo First Article Testing to verify compliance with design and performance requirements, and must be uniquely identified with IUID marking to ensure traceability across the Defense Logistics Agency’s inventory system. The work is solicited as a subcontract under a Total Small Business Set-Aside, meaning only small business concerns certified by the SBA are eligible to respond, and the NAICS code 332999 indicates the performance falls under Other Miscellaneous Fabricated Metal Product Manufacturing. The solicitation was posted on July 17, 2026, with a response deadline of July 29, 2026, and the contracting office is the ASC Supplier Oper AE and AF Division within the Department of Defense. All delivered items must be ready for immediate integration into military systems, with no deviation from the stated technical and administrative requirements.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 16 hours ago

DEADLINE

Precision Manufacturing of Threaded Tapered Pins (Critical Application Item)The contract requires the manufacture and supply of precision-machined tapered threaded pins designated as P/N AN386-3-16A and NSN 5315-00-265-9892, classified as a Critical Application Item due to their essential role in military systems. All components must strictly comply with applicable military specifications, ensuring dimensional accuracy, material integrity, and performance under demanding operational conditions. Rigorous quality control protocols are mandated, including full traceability of raw materials through every production stage, with documentation verifying origin, processing, and inspection results. Each unit must undergo inspection and certification to confirm adherence to technical requirements and avoid any risk of nonconformance. The solicitation, issued under the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, is structured as a subcontract and falls under NAICS code 332721 for machine shops. The response deadline is set for July 21, 2026, with the posting date on July 17, 2026. Place of performance details are unspecified, but the requirement for traceability and origin inspection implies that manufacturing and inspection activities must occur within approved facilities capable of meeting defense standards. The lack of a set-aside designation suggests this opportunity is open to all qualified suppliers, with the emphasis squarely on technical compliance, documentation rigor, and proven capability in producing mission-critical aerospace and defense hardware.

Precision Turned Product Manufacturing

POSTED

about 16 hours ago

DEADLINE

Specialized Material Supply and ProcessingThe contract calls for the supply of alloy steel and corrosion-resistant materials alongside specialized processing services including heat treatment, plating, anodizing, and welding, all requiring full documentation, certification, and traceability to ensure compliance with stringent quality standards. The materials and services are intended to meet precise technical specifications critical for defense and aerospace applications, with all work subject to rigorous inspection and adherence to industry-approved protocols. Issued under the NAICS code 332813 for forge shops and foundries, this subcontract is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with responses due by July 24, 2026. The work is expected to be performed without geographic restriction specified, and all deliverables must be accompanied by comprehensive records verifying material origins, processing steps, and final inspections to ensure full accountability and readiness for military use.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 16 hours ago

DEADLINE

First Article Testing and Certification ServicesThe contract solicits independent testing and certification services for the first article unit, requiring comprehensive dimensional inspection, material verification, and nondestructive testing in compliance with ASTM-E1417 standards. The work must be performed to.validate conformance to technical specifications prior to formal acceptance, with all findings and documentation submitted to Hill Air Force Base. This subcontract is categorized under NAICS code 541380, indicating it falls within the scientific and technical consulting services sector, and is issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The solicitation was posted on July 17, 2026, with a response deadline of July 24, 2026, requiring proposers to submit their offerings within this seven-day window. Performance is expected to be conducted in accordance with federal contracting requirements, though the specific place of performance and point of contact details are not provided.

Testing Laboratories and Services

POSTED

about 16 hours ago

DEADLINE

Precision Manufacturing of Quick Release Pin ReceptacleThe contract calls for the precision machining and production of a quick release pin receptacle designated by NSN 5342-01-049-0333, manufactured to strict military specifications with full compliance to all applicable effectivity bullets and MIL-STD-130 marking requirements. The component must meet all first article inspection criteria to ensure dimensional accuracy, material integrity, and functional performance in demanding operational environments. Production must be executed under a subcontracting arrangement, with adherence to defense procurement protocols governing quality assurance, traceability, and documentation. The solicitation was posted on July 17, 2026, with a response deadline of July 24, 2026, and falls under NAICS code 332721 for metal forging and stamping. The contracting organization is the ASC SUPPLIER OPER AE AND AF DIV within the Department of Defense, indicating direct relevance to military supply chain operations. Although no specific place of performance or point of contact is detailed, the requirement implies that all work must be performed by qualified suppliers capable of meeting defense-grade manufacturing standards and delivering fully compliant hardware on schedule.

Precision Turned Product Manufacturing

POSTED

about 16 hours ago

DEADLINE

Supply of Blind Rivets (NSN 5320-00-883-9393)The contract entails the manufacture and delivery of exactly 70 units of a specific blind rivet identified by NSN 5320-00-883-9393, under a firm fixed-price arrangement, ensuring cost certainty for both parties. All items must comply with mandatory military packaging and labeling specifications to meet Department of Defense standards for readiness and logistics. The work is procured as a subcontract under NAICS code 332999, indicating it falls under other miscellaneous fabricated metal product manufacturing, and is managed by the ASC SUPPLIER OPER AE AND AF DIV under the broader Department of Defense. The solicitation was posted on July 17, 2026, with responses required by July 21, 2026, establishing a tight, four-day window for submission. The place of performance and point of contact details are not specified, but the official solicitation is accessible via the DIBBS platform for further procurement details.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 16 hours ago

DEADLINE

Domestic and International Freight LogisticsThe contract involves the transportation of manufactured units from their origin to designated government destinations, encompassing both domestic trucking and potential international ocean freight services. All logistics operations must strictly comply with U.S. cargo preference laws, ensuring compliance with federal requirements for the use of U.S.-flagged vessels and domestic carriers where applicable. The work is classified as a subcontract under NAICS code 484220, which pertains to truck transportation for moving goods, and is issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. Responses are due by July 19, 2026, with the solicitation posted on July 17, 2026, and all performance activities are tied to government-controlled endpoints without specified geographic limitations.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 16 hours ago

DEADLINE

Specialized Packaging and PreservationThis contract mandates the application of military-compliant preservation and packaging standards in strict accordance with MIL-STD-2073-1E and MIL-STD-129R, ensuring that all items are protected for long-term storage and transportation under demanding conditions. The required procedures include vacuum sealing to eliminate moisture and contaminants, the inclusion of appropriate desiccants to maintain low humidity levels within packaging, and the placement of Type I (Code U) shelf-life labels that clearly indicate the expiration and storage requirements for the preserved items. These measures are essential to maintain the operational readiness and integrity of defense-grade equipment and components throughout their designated service life. The contract is structured as a subcontract under the NAICS code 326199, which corresponds to other plastic product manufacturing, and is managed by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense. The solicitation was posted on July 17, 2026, with a firm response deadline of July 19, 2026, indicating a tight turnaround for qualified vendors to submit proposals. The place of performance and point of contact details are unspecified, leaving full responsibility for logistics and coordination to the subcontractor. Compliance with all technical specifications and labeling requirements is mandatory, and failure to meet these standards may result in rejection of delivered goods or contract termination.

All Other Plastics Product Manufacturing

POSTED

about 16 hours ago

DEADLINE