Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Supply of Electrical Cable Assembly (NSN: 5930-01-596-3848, Part No: C1848)

Active

Federal

Response Deadline08/10/2026, 05:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract obligates the supplier to provide 12 units of a specific electrical cable assembly identified by NSN 5930-01-596-3848 and Part No C1848, with all units requiring compliance with military standards for packaging, labeling, and test certifications. The delivery must be completed to the place of performance in Curtis Bay, Maryland, 21226, and includes full documentation to ensure each assembly meets the required operational and inspection criteria. The solicitation is structured as a subcontract under NAICS code 335931 and is managed by the Sflc Procurement Branch 2 under the Department of Homeland Security. Proposals must be submitted by August 10, 2026, at 5:00 AM, following the posting of the opportunity on August 5, 2026, with no set-aside classification specified, leaving eligibility open to all qualified respondents.

General Info

Supplier to provide 12 NSN 5930-01-596-3848 cable assemblies to Curtis Bay, Maryland, by August 10, 2026, meeting military standards.

Agency

Department Of Homeland Security → Sflc Procurement Branch 2(00085)View Agency

NAICS

335931 - Current-Carrying Wiring Device ManufacturingView NAICS

Place of Performance

Curtis Bay, MD, 21226, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 5

subcontract

Response DeadlineAug 10

Submission deadline

Response Deadline

08/10/2026, 05:00:00 AM UTCin 4 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Homeland Security → Sflc Procurement Branch 2(00085)

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Homeland Security → Sflc Procurement Branch 2(00085)

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply and delivery of 12 units of a specified electrical cable assembly, including packaging, labeling, and test certifications per military standards.

Similar Contracts

Same NAICS industry code

Special-Purpose Electrical Cable Assembly ManufacturingA single custom electrical cable assembly, identified by NSN 6150-01-496-5544 and part number 93006A9001-1, is to be manufactured and delivered in accordance with military drawing specifications and applicable technical standards. The work falls under NAICS code 335931, classifying it as the manufacture of other electrical equipment and components, and is issued as a subcontract by the ASC Commodities Division under the Department of Defense. The solicitation was posted on August 5, 2026, with a firm response deadline of August 20, 2026, and the contract will be managed through the DIBBS platform. Performance location and point of contact details are not specified, and no set-aside classification applies to this requirement.

ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

RETAINER, ELECTRICAL

Solicitation # SPE7M5-26-Q-0839

The contract pertains to the procurement of 13 electrical retainers with NSN 5935-01-466-5336 under solicitation SPE7M5-26-Q-0839, issued by the Defense Logistics Agency’s Active Devices Division. The delivery is required within 134 days after award, and responses must be submitted by August 19, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. Specific requirements include the removal of government identification from non-accepted supplies, physical marking of bare items, and strict adherence to export control regulations under ITAR or EAR, which restrict the disclosure of technical data to foreign persons, regardless of location, and impose obligations on both U.S. and foreign-owned entities. Access to controlled technical data is restricted to contractors authorized by DLA who hold a valid US/Canada Joint Certification Program certification, have completed mandatory training on handling DOD export-controlled data, and have passed the DLA Export-Controlled Technical Data Questionnaire. The place of performance is designated as Anniston, Alabama, with Andrew Bracken listed as the primary point of contact.

ACTIVE DEVICES DIVISION

POSTED

about 10 hours ago

DEADLINE

CABLE ASSEMBLY, SPEC

Solicitation # SPE4A6-26-Q-1282

The contract is for a specialized electrical cable assembly identified by NSN 6150-01-326-0282, with a requirement for ten units to be delivered within 324 days of award. Technical and quality obligations are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the acquisition type and timing of solicitation amendments. Cybersecurity compliance mandates CMMC Level 2 certification through a certified third-party assessment organization, and packaging must adhere to DLA-specific standards. The item includes controlled technical data subject to ITAR or EAR regulations, restricting disclosure to foreign persons regardless of location and requiring compliance with DFARS 252.225-7048. Access to this data is limited to contractors with approved US/Canada Joint Certification Program status, verified completion of DOD export control training, and formal DLA authorization. Inspection and acceptance occur at origin, non-accepted items must have government identification removed, and physical marking of bare items is required. The solicitation, issued under SPE4A6-26-Q-1282, was posted on August 5, 2026, with responses due by August 20, 2026, and is managed by the Department of Defense’s ASC Commodities Division, with Marcita Robinson as the primary point of contact.

ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

CABLE ASSEMBLY, POWE

Solicitation # SPE4A6-26-T-12UK

The contract is for the procurement of eight cable assemblies, power, electrical, identified by NSN 5995-01-702-3934, under solicitation SPE4A6-26-T-12UK, issued by the Defense Logistics Agency’s ASC Commodities Division. Delivery is required within 170 days of award, and the solicitation opened on August 5, 2026, with a response deadline of August 13, 2026. The item is subject to stringent technical and quality requirements incorporated from the DLA Master List of Technical and Quality Requirements, including physical identification and bare item marking, packaging standards per DLA guidelines, and rules for removing government identification from non-accepted supplies. Inspection and acceptance must occur at the manufacturer’s origin, and sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances tolerated unless otherwise specified, with critical, major, and minor attributes assigned specific verification levels or AQLs. The technical data associated with this item is subject to export controls under ITAR or EAR, restricting access to authorized parties only—contractors must hold valid US/Canada Joint Certification Program certification, complete mandatory DOD export control training, and obtain DLA approval to handle the data. The place of performance is New Cumberland, Pennsylvania, and all technical and compliance obligations are enforced under applicable DFARS provisions including 252.225-7048.

ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

CABLE ASSEMBLY, SPEC

Solicitation # SPE4A6-26-T-12SN

The contract is for a cable assembly identified by NSN 5995-01-660-3439 and part number WHS-01554, with a quantity of three units, to be delivered under solicitation SPE4A6-26-T-12SN. Delivery is required within 170 days from the award date, with a firm delivery date of January 31, 2027, and an original required delivery date of March 30, 2027. The items must be delivered FOB origin, with no tolerance for quantity variance, and inspected and accepted at the destination. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including marking per MIL-STD-129 with no special marking codes, and palletization as specified. The material has no shelf life restriction but is designated as a critical application item and subject to cybersecurity maturity model certification (CMMC) Level 2 self-assessment requirements. The supplier must adhere to stringent quality assurance protocols, including zero-defect sampling under MIL-STD-1916 or comparable zero-based plans unless otherwise directed, with attributes classified as critical, major, or minor and assigned corresponding verification levels or AQLs. Technical and quality requirements referenced in this contract are sourced from the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation or award date depending on acquisition size. Documentation for source approval is required, and government identification must be removed from non-accepted supplies. The cable assembly is procured under the DoD authorized unit of issue, with pricing and logistics details aligned to the provided purchase request and delivery address at the DLA Distribution facility in New Cumberland, Pennsylvania. Transportation is governed by specific DLA procedural notes, and all work must be performed by a certified supplier, Crystal Group, Inc., with full compliance expected across cybersecurity, packaging, marking, and inspection standards. The solicitation was posted on August 5, 2026, with responses due by August 13, 2026, under a federal acquisition framework with NAICS code 335931.

ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

Solicitation # SPE7M2-26-Q-0722

This contract specifies the procurement of terminal lugs identified by NSN 5940-01-054-6295 and part number MS21004-4, with a total quantity of 684 packing groups, each equivalent to 100 units, for a total of 68,400 individual terminals. The item is designated as a commercial item and is subject to qualification through the Qualified Products List or Qualified Manufacturers List. Technical compliance is governed by SAE AS21004F Revision F dated 12/01/2023 and SAE AS7928 Revision C dated 05/01/2019, with configuration changes requiring formal Engineering Change Proposal requests. The product must be free from intentional addition of mercury or mercury-containing compounds, with limited exceptions for specific functional uses in batteries, lighting, instruments, weapon systems, or chemical reagents, and all exempt items must meet stringent containment and shock-proofing standards per NAVSEA 5100-003D. Delivery is set for 167 days after contract award, with FOB origin and inspection and acceptance points at destination. Pricing is firm fixed, with zero tolerance for quantity variance. Packaging must adhere strictly to MIL-STD-2073-1E and DLA packaging requirements, including use of approved materials, methods, and marking in accordance with MIL-STD-129 and ISO/IEC 16388 barcoding standards. The item is classified as critical application and subject to covered defense information protocols. The contract specifies the DLA distribution facility in New Cumberland, Pennsylvania, as the delivery point and includes detailed transportation protocols under DLAD Proc Notes C19 and C20. The solicitation, issued by the Department of Defense’s Nuclear Reactor Program, was posted on August 5, 2026, with responses due by August 12, 2026, and the material is required for delivery no later than April 6, 2027.

NUCLEAR REACTOR PROGRAM

POSTED

about 10 hours ago

DEADLINE

FUSE, CARTRIDGE

Solicitation # SPE7M5-26-T-368G

The contract is for the procurement of five cartridge fuses with NSN 5920-01-646-3582 under solicitation SPE7M5-26-T-368G, issued by the Department of Defense’s Active Devices Division. Delivery is required within 20 days after contract award, and responses must be submitted by August 17, 2026. The solicitation is subject to the DLA Packaging Requirements and incorporates all technical and quality specifications listed in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions. The alternate offeror must provide a complete data package including detailed information for both the approved and alternate parts. The place of performance is listed as FPO with zip code 96694, and the primary point of contact is Matthew Stanko, reachable via email and phone provided. The NAICS code 335931 indicates classification under Electrical Equipment and Component Manufacturing, and no set-aside type is specified. All government identification must be removed from non-accepted supplies per applicable regulations.

ACTIVE DEVICES DIVISION

POSTED

about 10 hours ago

DEADLINE

BATTERY POWER SUPPLY

Solicitation # SPE7LX-26-U-9315

The contract is for the procurement of a Battery Power Supply, identified by NSN 6130016095744 and part number OFM-2060-A1 manufactured by Intelligent Manufacturing Solutions, 6FQM4. This is a commercial item classified as a critical application item under an Indefinite Delivery Contract (IDC) below the Simplified Acquisition Threshold, with a one-year performance period. The estimated annual quantity is 40 units, but the government is not obligated to purchase the full amount; a guaranteed minimum of six units applies once the contract becomes binding. Delivery must be made FOB origin within 127 days of order receipt, with inspection and acceptance occurring at the destination. The item must comply with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements, with special marking code 00 indicating no special marking is required, and palletization must adhere to DLA’s RP001 packaging requirements. Sampling and acceptance are governed by MIL-STD-1916 or ASQ H1331 Table 1 using a zero-defects approach; critical, major, and minor attributes must meet verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes treated as major. The solicitation is restricted to small businesses and prohibits the submission of used, reconditioned, remanufactured, or former government surplus items. Quotes must remain valid for a minimum of 90 days. The contractor must comply with a comprehensive set of clauses including safeguarding covered defense information, cyber incident reporting, prohibition of hexavalent chromium, restrictions on covered telecommunications equipment, NIST SP 800-171 assessment requirements, and Buy American and Berry Amendment mandates with a reduced threshold of $150,000. Payment must be processed electronically through the Wide Area Workflow system, and all hazardous materials must be identified with accompanying Safety Data Sheets meeting 29 CFR 1910.1200 requirements. The contractor is required to maintain current representations in the System for Award Management and must not provide covered telecommunications equipment. All quotations must be submitted by August 20, 2026, via the DIBBS portal, with the primary point of contact being Theodore Misiolek of the DLA Land and Maritime Strategic Acq Program Directorate in

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 10 hours ago

DEADLINE

CABLE ASSEMBLY, SPECIAL

Solicitation # SPE4A6-26-Q-1281

This contract is for a single unit of a special-purpose electrical cable assembly identified by NSN 6150-01-496-5544, with a delivery deadline of 220 days after contract award. The technical and quality requirements governing this item are defined by the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment supersedes it. The assembly must comply with DLA packaging standards, require removal of government identification from non-accepted supplies, and be physically marked per specified identification protocols. Components within the assembly must be sourced from qualified manufacturers listed on approved Qualified Products Lists or Qualified Manufacturers Lists, and procurement must adhere to the referenced procurement note H02. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331, Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0, respectively. Zero non-conformances are required unless otherwise stated, and manufacturers may choose either attribute or variable inspection methods under MIL-STD-1916. Technical data associated with this item is subject to export controls under ITAR or EAR, restricting disclosure to foreign persons regardless of location, and DFARS 252.225-7048 is applicable. Access to this controlled data is limited to contractors with approved US/Canada Joint Certification Program certification, completion of required DOD export control training, and prior authorization from DLA. The solicitation was issued on August 5, 2026, with responses due by August 20, 2026, under solicitation number SPE4A6-26-Q-1281, managed by the Department of Defense’s ASC Commodities Division, and point of contact is Marcita Robinson.

ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

Supply of Electrical Connectors (NSN: 5930-01-687-7940 to C2944)The contract calls for the supply of six units each of five additional electrical connector types designated C2940 through C2944, all of which must meet OEM compliance standards to ensure functional and operational integrity. Each connector must be properly packaged to safeguard against damage during transit and delivered to the U.S. Coast Guard facility located in Curtis Bay, Maryland, with the ZIP code 21226. The solicitation is classified as a subcontract under NAICS code 335931, which pertains to other electrical equipment and component manufacturing, and is managed by the Sflc Procurement Branch 2 under the Department of Homeland Security. The opportunity was posted on August 5, 2026, with a strict response deadline of August 10, 2026, at 5:00 a.m., leaving a narrow window for qualified suppliers to submit proposals. All deliverables must align with federal procurement requirements, and failure to meet compliance, packaging, or delivery specifications may result in disqualification.

Sflc Procurement Branch 2(00085)

POSTED

about 15 hours ago

DEADLINE

Supply of Electrical Connectors (NSN: 5930-01-687-7939, Part No: C2939)The contract involves the supply of six military-grade electrical connectors identified by NSN 5930-01-687-7939 and Part No C2939, with strict requirements for full traceability, secure packaging, and compliant labeling as specified in the contract terms. All units must meet military specifications and be delivered with documentation ensuring authenticity and lineage throughout the manufacturing and supply chain. Performance is mandated to occur in Curtis Bay, Maryland, with a zip code of 21226, and the work is classified as a subcontract under NAICS code 335931. The solicitation was posted on August 5, 2026, and responses are due by August 10, 2026, at 5:00 AM Eastern Time. The contracting activity is managed by the SFLC Procurement Branch 2 under the Department of Homeland Security, with no set-aside designation applied.

Sflc Procurement Branch 2(00085)

POSTED

about 15 hours ago

DEADLINE

Supply of Electrical Connectors (NSN: 5930-01-687-7938, Part No: C2938)The contract requires the supply and delivery of six units of a specified electrical connector identified by NSN 5930-01-687-7938 and part number C2938, with full documentation and appropriate packaging as mandated for commercial items. All deliverables must comply with Federal Acquisition Regulations, ensuring adherence to quality, testing, and documentation standards expected for government procurement. The item is to be delivered to a designated place of performance in Curtis Bay, Maryland, with a zip code of 21226. The solicitation was posted on August 5, 2026, with a firm response deadline of August 10, 2026, at 5:00 a.m., under a subcontract classification. The procurement falls under NAICS code 335931, which pertains to other electrical equipment and component manufacturing, and is managed by the Sflc Procurement Branch 2 within the Department of Homeland Security. No set-aside type is designated, and the contract is open to any qualified commercial supplier capable of meeting the technical and regulatory requirements. The contract opportunity is accessible via the SAM.gov portal for potential bidders.

Sflc Procurement Branch 2(00085)

POSTED

about 15 hours ago

DEADLINE

More opportunities from Department Of Homeland Security → Sflc Procurement Branch 2(00085)

Same awarding agency

Supply of Electrical Connectors (NSN: 5930-01-687-7937, Part No: C2937)The contract pertains to the supply and delivery of six high-reliability electrical connectors, fully aligned with original equipment manufacturer specifications and military packaging standards, identified by NSN 5930-01-687-7937 and part number C2937. These connectors are critical components intended for use in defense or government operational systems requiring stringent performance and durability under demanding environments. The solicitation, classified as a subcontract, falls under NAICS code 335931 for other electrical equipment and component manufacturing and is managed by the Sflc Procurement Branch 2 within the Department of Homeland Security. Delivery must be completed at the place of performance located in Curtis Bay, Maryland, with a zip code of 21226. Responses are due by August 10, 2026, at 5:00 a.m., with the opportunity posted on August 5, 2026, and must adhere to all applicable military and OEM compliance protocols including packaging, labeling, and testing requirements as implied by the specified standards.

Current-Carrying Wiring Device Manufacturing

POSTED

about 15 hours ago

DEADLINE

Solicitation # 70Z08526N30102B00

The United States Coast Guard Surface Forces Logistics Center is soliciting quotes for a range of specialized electrical and mechanical components, all exclusively manufactured by ALLIED SYSTEMS COMPANY INC with CAGE code 60848. Only the OEM or its authorized distributors may submit proposals, and bidders must provide a formal letter from ALLIED SYSTEMS COMPANY INC verifying their authorized distributor status. No substitutions are permitted without explicit approval from USCG SFLC technical experts, and all items must strictly adhere to the specified part numbers and National Stock Numbers. The order includes nine line items consisting of cable assemblies, filter elements, an absolute encoder, a gasket, and a wire rope assembly, with quantities ranging from 4 to 20 units per item, totaling 72 units across all items. All items must be individually packaged per MIL-STD-2073-I E Method 10 using weather-resistant materials, waterproof barriers, bubble wrap, and ASTM-D5118 fiberboard boxes, with desiccant conforming to MIL-D-3464 Type II or III and labeling in compliance with MIL-STD-129R. Specific items like the encoder and wire rope assembly have additional packaging requirements including rigid shipping containers and wooden crates with internal securing methods to prevent damage during transit. The final delivery address is the USCG SFLC Receiving Room in Baltimore, MD, with shipping included in the total price. Quotes must be submitted via email no later than August 10, 2026, to Carlos Diaz Garcia, with technical inquiries directed to Jake Redden. The solicitation is open to all eligible parties but restricts participation to those with direct OEM authorization to ensure component integrity and operational reliability for Coast Guard systems.

Overhead Traveling Crane, Hoist, and Monorail System Manufacturing

POSTED

about 15 hours ago

DEADLINE

Solicitation # 70Z08526Q30101B00

The Antonnia solicitation, identified by number 70Z08526Q30101B00, was posted on August 5, 2026, with a response deadline of August 19, 2026, at 4:00 PM ET. It is issued under the North American Industry Classification System code 334290 and does not involve any small business set-aside provisions. The contracting office is the Sflc Procurement Branch 2 within the Department of Homeland Security, located in Alameda, California, with a zip code of 94501. The place of performance has not been specified in the provided data. Primary point of contact is Stephanie Garity, reachable at 410-762-6496 or stephanie.a.garity@uscg.mil, with secondary contact Chad Ball at 571-607-2534 or chad.a.ball@uscg.mil. The solicitation is accessible online via the SAM.gov portal for further details and submissions.

Other Communications Equipment Manufacturing

POSTED

about 15 hours ago

DEADLINE

Electronic Engine Control Regulator SupplyThe contract calls for the supply of five electronic engine control regulators with the national stock number 2990 01-662-8147, specifically designed for use in marine propulsion systems. These units must include built-in EMI/RFI shielding and demonstrate environmental durability to withstand the harsh operational conditions typical of maritime environments. The requirement is issued as a subcontract under NAICS code 334511, which classifies it within the electronic components manufacturing sector. The solicitation was posted on August 4, 2026, with responses due by August 18, 2026, and is managed by the SFLC Procurement Branch 2 under the Department of Homeland Security. While no specific point of contact or physical location details are provided, the performance location is broadly tied to the agency’s operational needs, and the procurement is open to eligible subcontractors without a specified set-aside designation. Interested parties must submit proposals through the official SAM.gov portal linked in the solicitation.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

Piston Assembly SupplyThe contract entails the supply of twelve piston assemblies designated by NSN 2815-01-587-2024, intended for use in hydraulic or engine systems where compliance with original equipment manufacturer or remanufactured specifications is mandatory. These components must meet stringent performance and quality standards to ensure operational integrity in mission-critical applications. The solicitation is classified as a subcontract under NAICS code 333618, which corresponds to other engine equipment manufacturing, and is managed by the Sflc Procurement Branch 2 under the Department of Homeland Security. The opportunity was posted on August 4, 2026, with a firm response deadline of August 18, 2026, at 4:00 PM, allowing potential vendors limited time to submit proposals. No set-aside provisions are specified, meaning the contract is open to any qualified supplier regardless of business size or certification status. The place of performance and point of contact details are not provided, and the official solicitation can be accessed via the provided SAM.gov link for additional submission requirements and technical specifications.

Other Engine Equipment Manufacturing

POSTED

DEADLINE

O-Ring and Sealing Components SupplyThe contract calls for the supply of 400 O-rings identified by NSN 5331-01-647-8573, specifically designed for use in hydraulic or pneumatic systems where resistance to fuel, oil, and seawater is critical. These components must meet stringent material and performance standards to ensure reliability in harsh operating environments. The solicitation is structured as a subcontract under NAICS code 326220, which pertains to plastic profile and shape manufacturing, indicating the supplier is expected to have expertise in producing sealed elastomeric components to military or industrial specifications. The contract was posted on August 4, 2026, with responses due by August 18, 2026, providing a two-week window for submission. The contracting entity is the Sflc Procurement Branch 2 under the Department of Homeland Security, and while the physical place of performance and point of contact details are not specified, the requirement implies delivery to a U.S. government facility or operational location where these sealed components will be integrated into critical systems. All proposals must demonstrate compliance with technical requirements for fluid resistance and dimensional accuracy, and suppliers must be prepared to provide certification of material composition and quality assurance documentation upon request.

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

DEADLINE

Spacer and Locking Hardware SupplyThe contract titled Spacer and Locking Hardware Supply seeks the provision of precision fasteners including plate spacer nuts, self-locking hex nuts, and machine thread plugs, all of which are critical components for mechanical and structural applications within federal operations. The procurement is classified as a subcontract under NAICS code 332722, indicating it falls within the category of screw, nut, and bolt manufacturing, and is administered by the Sflc Procurement Branch 2 under the Department of Homeland Security. The solicitation was posted on August 4, 2026, with a firm deadline for responses set for August 18, 2026, at 4:00 PM, leaving potential vendors a limited window to prepare and submit compliant proposals. The place of performance and point of contact details are not specified, and no set-aside designation is indicated, meaning the opportunity is open to all qualified suppliers regardless of business size or category. Bidders must ensure their offerings meet the exacting standards required for aerospace, defense, or critical infrastructure uses given the nature of the components and the involved agency.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

Zinc Rod Anode SupplyThe contract is for the supply of 200 OEM zinc rod anodes identified by NSN 5340-01-615-6596, intended for use in marine corrosion protection systems. These anodes are critical components in safeguarding metal structures from electrolytic degradation in saltwater environments, ensuring the longevity and integrity of vessels and offshore infrastructure. The procurement is issued as a subcontract under the NAICS code 332996, which pertains to other fabricated metal product manufacturing, indicating the specialized nature of the anode production process. The solicitation was posted on August 4, 2026, with a response deadline of August 18, 2026, at 4:00 PM, giving potential suppliers a two-week window to submit proposals. The contracting agency is the Sflc Procurement Branch 2 under the Department of Homeland Security, though specific details regarding the place of performance or point of contact are not provided. Interested parties must respond through the official SAM.gov portal linked in the posting, and while no set-aside classification is specified, the nature of the item suggests qualification standards related to military or federal-grade manufacturing compliance are likely required.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

DEADLINE

ANODE,CORROSION PRE

Solicitation # 70Z08526Q30099B00

The contract is for an anode used in corrosion prevention and is solicited under number 70Z08526Q30099B00 by the Department of Homeland Security through the Sflc Procurement Branch 2. The solicitation was posted on August 4, 2026, with a response deadline of August 18, 2026, at 4:00 PM Eastern Time. There is no set-aside designation applied to this procurement, meaning it is open to all eligible contractors without restriction based on business size or category. The North American Industry Classification System code is 331491, indicating the product falls under other fabricated metal product manufacturing. The office responsible is located in Alameda, California, with a ZIP code of 94501, and the point of contact for primary inquiries is Stephanie Garity, reachable at 410-762-6496 or stephanie.a.garity@uscg.mil, with Chad Ball as the secondary contact at 571-607-2534 or chad.a.ball@uscg.mil. The place of performance has not been specified in the provided data, and interested parties must access the full solicitation details through the SAM.gov portal link provided.

Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding

POSTED

DEADLINE

Supply of Electrical Cable Assembly (NSN… | CLEATUS