Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Supply of Fixed Resistor Network (NSN 5905-01-236-6558)

Active

Federal

Response Deadline09/21/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Department Of Defense → ACTIVE DEVICES DIVISIONView Agency

NAICS

334413 - Semiconductor and Related Device ManufacturingView NAICS

Place of Performance

USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7M5-26-T-464V.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

RESISTOR NETWORK, FIXED

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 8

subcontract

Response DeadlineSep 21

Submission deadline

Response Deadline

09/21/2026, 05:00:00 PM UTCin 12 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ACTIVE DEVICES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ACTIVE DEVICES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies fixed resistor networks for prime contractors on Defense Logistics Agency (DLA) supply contracts. Sources component NSN 5905-01-236-6558 and performs specialized handling, packaging, and processing for Electrostatic Discharge (ESD) sensitive devices. Utilizes Method of Preservation GX for individual packaging. Delivers one unit of the verified resistor network.

Similar Contracts

Same NAICS industry code

QPL Electrical Shielding Gasket Supplier

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 20 hours ago

DEADLINE

Supply of Lead Acid Storage Batteries (NSN 6140-01-600-9507)

Defense Logistics Agency

POSTED

about 20 hours ago

DEADLINE

Supply of Aviation-Grade Indicator Lamps (Piece Number 20)

ASC COMMODITIES DIVISION

POSTED

about 20 hours ago

DEADLINE

Manufacturing of Light Assembly, Indicator (NSN 6210-00-336-5873)

ASC COMMODITIES DIVISION

POSTED

about 20 hours ago

DEADLINE

MICROCIRCUIT, DIGITA

Solicitation # SPE7M5-26-T-465H

This contract is for the procurement of four digital microcircuits, specifically part number CD4010BF from Renesas Electronics America Inc, under NSN 5962-01-021-3629. The acquisition is governed by Federal Supply Class 5962 and requires strict adherence to quality and technical standards, including the use of qualified suppliers and the maintenance of comprehensive supply chain traceability documentation. A critical requirement is the submission of DLA Land and Maritime Form 918 and supporting traceability or test reports for approval by the contract administrator at least 15 days prior to the delivery date; shipment is prohibited until written authorization is received. The contract mandates rigorous packaging and marking standards to prevent damage and ensure authenticity. This includes compliance with IPC/JEDEC J-STD-609 for lead finish identification and MIL-PRF-81705 for electrostatic discharge and electromagnetic interference protection. All items must be delivered FOB Origin to DLA Distribution DDWO in Columbus, Ohio, with a required delivery window of 70 days. Failure to provide the correct documentation within the packaging or shipping without prior authorization may result in the government withholding payment.

ACTIVE DEVICES DIVISION

POSTED

about 20 hours ago

DEADLINE

SEMICONDUCTOR DEVICE, D

Solicitation # SPE7M5-26-T-464W

This contract, identified as solicitation SPE7M5-26-T-464W, is for the procurement of 20 units of a semiconductor diode device, specifically NSN 5961-01-343-4481. The item is associated with CAES Systems LLC part number 3451940-1 and Semtech Corporation part number SS6763. Delivery is required within five days after the order, with the shipping destination located in San Antonio, Texas. The contract specifies FOB Origin terms with inspection and acceptance occurring at the destination. The procurement is subject to rigorous quality and technical standards, including the DLA Master List of Technical and Quality Requirements and specific mandates for supply chain traceability documentation. Compliance with MIL-STD-1916 or ASQ H1331 is required for sampling, and packaging must adhere to MIL-STD-2073-1E and MIL-DTL-19491. Additionally, the contractor must follow IPC/JEDEC J-STD-609 for lead finish marking and labeling. The item is classified as a qualified item under the Qualified Suppliers List of Distributors and Qualified Testing Suppliers List for Federal Supply Classes 5961 and 5962.

ACTIVE DEVICES DIVISION

POSTED

about 20 hours ago

DEADLINE

Solicitation # SPE7M5-26-T-464X

This contract is for the procurement of one commercial off the shelf transistor, identified by NSN 5961-00-161-3462 and part number MPSA05. The item is designated as a critical application item and must be sourced from qualified suppliers for Federal Supply Classes 5961 and 5962. Delivery is required within 20 days after the order, with the final destination being the Taiwan Army Zuo-Ying Ammunition Sub in Kaohsiung City. The contractor must adhere to strict quality and technical requirements, including the maintenance of supply chain traceability documentation and compliance with MIL-STD-129 for marking. Specific packaging and labeling standards apply, including IPC/JEDEC J-STD-609 for lead finish identification and MIL-DTL-19491 for semiconductor devices. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds in the hardware, preservation, and packaging.

ACTIVE DEVICES DIVISION

POSTED

about 20 hours ago

DEADLINE

Robotic Control System and Teach Pendant

FDA Office Of Acq Grant Svcs

POSTED

DEADLINE

Replacement Parts Supply for Night Vision Viewers

Navsup Weapon Systems Support

POSTED

DEADLINE

Ballistic Protection Installation

Dcasdivision Of Municipal Supply Service

POSTED

DEADLINE

59--MICROCIRCUIT,MEMORY

Solicitation # SPE7M526T464U

DLA Land And Maritime is soliciting quotes for the procurement of two memory microcircuits under solicitation number SPE7M526T464U. The approved source for this item is 66935 031-01610-036, and the delivery is required at DLA Distribution DDWO within 150 days after the order is placed. This is a combined solicitation under NAICS code 334413, with quotes due by September 18, 2026. All submissions must be made electronically via the provided link, as hard copies of the solicitation and technical drawings are not available. Interested parties should direct inquiries to the buyer listed in the solicitation document or through the DIBBS portal.

DLA Land And Maritime

POSTED

DEADLINE

59--FUSE,CARTRIDGE

Solicitation # SPE7M126U5719

DLA Land and Maritime is soliciting quotes for the procurement of cartridge fuses under NSN 5920008230751. This request for quotation may result in an automated Indefinite Delivery Contract with a one year term or a maximum aggregate value of 350,000.00 dollars. The contract includes a guaranteed minimum quantity of 65 units, with an initial line item requirement for 438 units to be delivered within 78 days after the order is received. The items are designated as qualified products list items and will be shipped to various CONUS and OCONUS DLA depots. All quotes must be submitted electronically by the deadline of September 22, 2026. This procurement falls under NAICS code 334413 and is managed by the office located in Columbus, Ohio.

DLA Land And Maritime

POSTED

DEADLINE

More opportunities from Department Of Defense → ACTIVE DEVICES DIVISION

Same awarding agency

Supplier of Electrical Plug Connectors (NSN 5935-01-312-3963)

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 20 hours ago

DEADLINE

Electronic Shielding Gasket Supplier

Electronic Connector Manufacturing

POSTED

about 20 hours ago

DEADLINE

CONNECTOR, PLUG, ELEC

Solicitation # SPE7M5-26-T-465S

This solicitation, issued by the Department of Defense Active Devices Division under solicitation number SPE7M5-26-T-465S, is for the procurement of 20 electrical plug connectors identified by NSN 5935-01-312-3963. The contract requires delivery within 20 days after receipt of the order, with the place of performance located in Newport, Massachusetts. Due to the nature of the technical data associated with this item, the contract is subject to strict export controls under ITAR and EAR regulations. Access to this data is limited to DLA contractors who possess an approved US/Canada Joint Certification Program certification and have completed the required training and questionnaires. Compliance with DFARS 252.225-7048 is mandatory to ensure that technical data is not disclosed to unauthorized foreign persons or entities.

Electronic Connector Manufacturing

POSTED

about 20 hours ago

DEADLINE

RESISTOR NETWORK, FIXED

Solicitation # SPE7M5-26-T-464V

This contract is for the procurement of one fixed film resistor network, identified by NSN 5905012366558, under solicitation SPE7M5-26-T-464V. The item must adhere to the technical specifications of MIL-PRF-83401/2H(4) and is subject to the Qualified Products List or Qualified Manufacturers List. Delivery is required within 20 days, with FOB origin for delivery, inspection, and acceptance. Strict environmental and safety compliance is required, including a prohibition on Class I ozone-depleting substances and the intentional addition of mercury. The supplier must follow DLA packaging requirements, specifically utilizing MIL-PRF-81705 for electrostatic discharge and electromagnetic interference protection to prevent damage to leads and terminals. Marking must comply with MIL-STD-129, and palletization must follow RP001 standards.

Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 20 hours ago

DEADLINE

HEATER, THERMAL RELEASE

Solicitation # SPE7M5-26-Q-1005

This solicitation, issued by the Department of Defense Active Devices Division under solicitation number SPE7M5-26-Q-1005, is for the procurement of two thermal release heaters identified by NSN 5999-00-504-9681. The contract requires delivery within 136 days after the order is placed and specifies performance in New Cumberland, Pennsylvania. The agreement incorporates specific technical and quality standards as defined in the DLA Master List, including requirements for packaging, physical item marking, and the removal of government identification from non-accepted supplies. Because no existing data is available, any alternate offeror must provide a complete data package covering both the approved and alternate parts.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 20 hours ago

DEADLINE

SHIELDING GASKET, ELECT

Solicitation # SPE7M5-26-T-465F

This contract is for the procurement of five electronic shielding gaskets, identified by NSN 5999-01-178-8286 and part number 7608716. The order is issued by the Department of Defense Active Devices Division under solicitation SPE7M5-26-T-465F, with a required delivery date of September 1, 2026, and a delivery window of 20 days. The items are to be delivered FOB destination to the USS John P Murtha LPD 26. Compliance requires adherence to the DLA Master List of Technical and Quality Requirements, specifically regarding packaging, physical identification, and configuration change management. Sampling must follow MIL-STD-1916 or ASQ H1331, with zero non-conformances required for acceptance. Packaging must comply with MIL-STD-129 and RP001, with hazardous materials following TQ requirement IP025 or non-hazardous items following ASTM D3951.

Electronic Connector Manufacturing

POSTED

about 20 hours ago

DEADLINE

ETHERNET TRANSCEIVER

Solicitation # SPE7M526R0025

Solicitation SPE7M5-26-R-0025 is a procurement request by the Department of Defense, specifically DLA Land and Maritime, for 68 units of Ethernet Transceivers under NSN 1285-01-628-4149. The requirement specifies various approved part numbers from Lockheed Martin Corporation and Mercury Systems, Inc. This is a Firm Fixed Price contract with a delivery timeline of 274 days after the order is placed. The point of contact for this acquisition is Amy Plymale-Hillis. The contract stipulates that inspection and acceptance will occur at the destination, with shipping handled as FOB Origin. Delivery is directed to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Packaging and marking must comply with MIL-STD-129, MIL-STD-2073-1E, and DLA packaging requirements for procurement. Additionally, the contract incorporates specific technical and quality requirements, including configuration change management and the removal of government identification from non-accepted supplies.

Other Electronic Component Manufacturing

POSTED

about 20 hours ago

DEADLINE

FUSE, CARTRIDGE

Solicitation # SPE7M5-26-T-465L

This contract solicitation, identified as SPE7M5-26-T-465L, is issued by the Department of Defense Active Devices Division for the procurement of cartridge fuses under NSN 5920-01-507-9428. The requirement consists of 310 packages, with an established delivery timeframe of 65 days after receipt of order. Approved part numbers include Mersen USA EP Corp ATQR20, Cooper Bussmann LLC FNQ-R-20, and Littelfuse Inc KLDR020. The items are to be delivered FOB Origin to DLA Distribution San Diego, with both inspection and acceptance occurring at the destination. The procurement is subject to specific technical and quality requirements, including DLA packaging standards RP001 and hazardous materials shipping guidelines IP025. A strict prohibition is placed on the intentional addition of mercury or mercury-containing compounds, with limited exceptions for specific functional components as defined by NAVSEA. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129. The solicitation falls under NAICS code 335313 and requires adherence to the DLA Master List of Technical and Quality Requirements.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 20 hours ago

DEADLINE

MICROCIRCUIT, LINEAR

Solicitation # SPE7M5-26-T-464Y

This contract, solicitation number SPE7M5-26-T-464Y, is issued by the Department of Defense Active Devices Division for the procurement of 10 units of a linear microcircuit, specifically Analog Devices part number LTC4211IMS#PBF (NSN 5962-01-631-1095). The delivery is set for 147 days after receipt of order, with a required delivery date of April 19, 2027, and shipping is designated FOB Origin to DLA Distribution DDWO in Columbus, Ohio. The procurement is subject to stringent quality and traceability requirements under Federal Supply Class 5962. The contractor must provide a completed DLA Land and Maritime Form 918 and unredacted traceability or test documentation at least 15 days prior to the delivery date. Shipment is prohibited until the contract administrator provides written confirmation that the documentation is adequate. Additionally, the contractor must adhere to CMMC Level 2 self-assessment standards and strict packaging requirements, including MIL-PRF-81705 for ESD and EMI protection and IPC/JEDEC J-STD-609 for lead finish marking. Surplus items are explicitly not acceptable for this procurement.

Other Building Material Dealers

POSTED

about 20 hours ago

DEADLINE

GASKETING MATERIAL,

Solicitation # SPE7M5-26-T-465M

This solicitation, SPE7M5-26-T-465M, is issued by the Department of Defense Active Devices Division for the procurement of 150 units of conductive gasketing material, identified by NSN 5999-01-540-6235. The contract is a total small business set-aside under NAICS code 444180. Approved manufacturers include Parker-Hannifin Corporation and Raytheon Company, both utilizing part number X7063439. Delivery is required within five days after the order, with shipping designated as FOB Origin and the final destination being the Tooele Army Depot in Utah. The procurement is subject to strict technical and quality requirements, including DLA packaging standards and a prohibition on the use of Class I ozone-depleting substances during manufacturing or testing. All marking and packaging must comply with MIL-STD-129 and MIL-STD-2073-1E. Contractors proposing part number changes or superseding items must provide manufacturer documentation for approval by the Product Specialist or Engineering Support Activity. Inspection and acceptance will occur at the destination, and the original required delivery date is set for April 6, 2026.

Other Building Material Dealers

POSTED

about 20 hours ago

DEADLINE

FILTER ELEMENT, AIR CON

Solicitation # SPE7M5-26-T-464Z

This contract, identified by solicitation number SPE7M5-26-T-464Z, is a federal procurement issued by the Department of Defense for one air conditioning filter element assembly. The item is identified by NSN 4130-01-687-2719 and part number 78209-21801-102, manufactured by Sikorsky Aircraft Corporation. The procurement is managed under purchase request 7018185566 with a required delivery date of September 2, 2026, and a delivery timeframe of 20 days after the order is placed. The contract specifies that delivery, inspection, and acceptance will occur at the destination, with shipping addresses provided for both parcel post and freight in Okinawa, Japan. Compliance with DLA packaging requirements RP001 and marking standards MIL-STD-129 is mandatory, along with the removal of government identification from non-accepted supplies per RQ011. The solicitation was posted on September 8, 2026, with a response deadline of September 21, 2026, and falls under NAICS code 334419.

Other Electronic Component Manufacturing

POSTED

about 20 hours ago

DEADLINE

CONNECTOR, RECEPTACLE, E

Solicitation # SPE7M5-26-T-465A

This solicitation, issued by DLA Land and Maritime under contract number SPE7M5-26-T-465A, is a Request for Quotations for electrical receptacle connectors, specifically identified by NSN 5935-00-855-3824. The procurement includes items from manufacturers such as Ideal Precision Meter Co and Winchester Interconnect Corporation. The contract specifies a delivery requirement of five days from the order date, with an original required delivery date of September 4, 2026. The items are to be delivered FOB Origin, with inspection and acceptance occurring at the destination. Shipping must be conducted via the fastest traceable means, and the use of parcel post is strictly prohibited. Technical and quality requirements are governed by the DLA Master List, which takes precedence over standard commercial packaging like ASTM D3951. Packaging must comply with MIL-STD-129 for marking and labeling, and specific protocols apply if the material is deemed hazardous under FED-STD-313. Sampling for quality assurance must follow MIL-STD-1916 or ASQ H1331, with specific verification levels assigned to critical, major, and minor attributes. This acquisition falls under NAICS code 334417 and is managed by the Active Devices Division of the Department of Defense. Quotes are due by September 21, 2026, and the procurement may be a candidate for automated award.

Electronic Connector Manufacturing

POSTED

about 20 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS