Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Supply of Helicopter Transmission Lubricating Oil

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the supply and delivery of 24 quarts of military-grade lubricating oil specifically formulated for helicopter transmissions, adhering to the National Stock Number NSN 9150012092684. The product must be delivered to Fort Campbell, Kentucky, no later than July 28, 2026, ensuring full compliance with military specifications for performance and safety under operational conditions. The item falls under NAICS code 324191, indicating classification within other petroleum and coal products manufacturing, and is managed under a subcontract arrangement by the Defense Logistics Agency on behalf of the Department of Defense. The delivery timeline is critical to support readiness and maintenance schedules for rotorcraft assets based at the installation, and failure to meet the deadline could impair mission readiness. All materials must meet stringent defense standards without deviation, and the contract is part of broader logistical efforts to maintain aviation infrastructure.

General Info

24 quarts military-grade lubricating oil to Fort Campbell by July 28, 2026, per NSN 9150012092684

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

324191 - Petroleum Lubricating Oil and Grease ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 17

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply and delivery of 24 quarts of military-grade lubricating oil for helicopter transmissions, compliant with NSN 9150012092684, to Fort Campbell, KY by July 28, 2026.

Similar Contracts

Same NAICS industry code

LUBRICATING OIL, ENGINE

Solicitation # SPE4A5-26-T-316E

This contract pertains to the procurement of engine lubricating oil conforming to MIL-PRF-2104N and designated by NSN 9150015429479 with part number 15W-40. The product must contain a minimum of 25% re-refined oil content, and the contractor must provide certification of this composition to the contracting officer upon request. The item is classified as a commercial off-the-shelf (COTS) product with a shelf life of 36 months, extendable under Type II (Code 7) requirements, and must comply with all applicable Department of Defense technical and quality standards referenced in the DLA Master List. Packaging, marking, and shipping adhere strictly to MIL-STD-2073-1E, MIL-STD-129, and MIL-STD-290H, with no paper labels permitted; containers must be new, unused, internally compatible, and marked with barcodes and special shelf-life coding as specified. Each unit of issue is a 25-liter pail, and the contract requires delivery of 21 units FOB destination within 162 days. Quality assurance protocols mandate that a two-gallon sample of each production lot, accompanied by the contractor’s analytical data, be sent within four days of packaging to the Army Petroleum Center without cost to the government. Inspection and acceptance occur at the destination, where any defective item discovered after shipment may result in rejection of the entire lot, excluding damage incurred in transit. Sampling follows MIL-STD-1916 or an equivalent zero-based plan, with specified critical, major, and minor attributes assigned verification levels or AQLs. Hazardous communication standards require approved Safety Data Sheets and OSHA-compliant labeling to be reviewed by technical personnel prior to contract award, with copies submitted to the DLA Aviation HMIRS office. The product must originate from qualified manufacturers listed on the QPL for 2104, 15W40, and all packaging and shipment procedures align with DLA’s procurement packaging requirements and hazardous materials handling guidelines. The delivery address is located in Tracy, California, with an original required ship date of January 17, 2027, and no variance in quantity is permitted.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 15 hours ago

DEADLINE

GREASE, AIRCRAFT

Solicitation # SPE4A5-26-T-316J

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 15 hours ago

DEADLINE

Supply of Aviation Grease SHC 100 (NSN 9150014812125)

Defense Logistics Agency

POSTED

DEADLINE

HYDRAULIC FLUID, PET

Solicitation # SPE2DS-26-T-280N

The contract specifies the procurement of petroleum-based hydraulic fluid for use in all A-DEC chairs, requiring the fluid to include a noise-reducing additive and be supplied in 16 fluid ounce bottles, with the unit of issue being each. The product is identified by NSN 9150-01-594-0940, and the quantity requested is one unit. Bidders must clearly state the source and part number of the product being offered. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition type. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed prior to return. Delivery is required within 20 days of award, and the solicitation falls under NAICS code 324191, issued by the Department of Defense’s Medical Supply Chain Medical Surgical Family Support Facility. The solicitation number is SPE2DS-26-T-280N, posted on July 28, 2026, with responses due by August 3, 2026, and the point of contact is Marc Canalichio at the provided email and phone number.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

GREASE, FOOD PROCESSING

Solicitation # SPE4A0-26-T-4077

This contract specifies the procurement of a commercial off-the-shelf grease formulated for food processing equipment, identified by NSN 9150-01-604-3862 and part number OPTILEB GR 823-2 from Castrol Industrial Inc. The product is supplied in containers, each containing 37 to 39 pounds, with a single unit of issue required under the contract. The grease has no shelf life limitation and must comply with all applicable technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, including packaging, labeling, and hazardous communication standards. All safety data sheets and hazard warning labels must be reviewed and approved by technical personnel prior to contract award, with approved documents submitted to the DLA Aviation HMIRS office. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels or AQLs based on criticality. Packaging must conform to MIL-STD-2073-1E and marking to MIL-STD-129, with palletization adhering to DLA packaging guidelines. The item is to be delivered FOB destination within five days, with no variance allowed in quantity, and inspection and acceptance occur at the destination. The contract number is SPE4A0-26-T-4077, issued by the Department of Defense for use by the Aviation Supply Chain ESOC Buys office, with performance located in Raytown, Missouri.

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

RFQ-171-260000000416-1 | CCL-PUB-8 MILEAP CHILD CARE CENTER LICENSING RULE BOOK

Solicitation # RFQ-171-260000000416-1

The contract pertains to the production and delivery of the CCL-PUB-8 MILEAP Child Care Center Licensing Rule Book by the Michigan Department of Technology, Management and Budget (DTMB), with solicitation number RFQ-171-260000000416-1. Responses are due by July 31, 2026, and submission must occur electronically through the state’s Sigma portal. Although the contract does not specify an estimated value or detailed pricing structure, it mandates the delivery of a final product in PDF format along with all associated source files including fonts, images, and revision history. The deliverable must comply with state-specific licensing rules and be free of defects in material and workmanship. Title and risk of loss transfer to the State of Michigan upon delivery to its designated location at 7461 Crowner Dr., Lansing, MI 48913 under F.O.B. destination, inside delivery terms. Inspection and acceptance are solely the responsibility of the State, and non-conforming items must be corrected at the vendor’s expense within ten days or face rejection. The contractor is required to adhere to a range of legal, operational, and administrative obligations including compliance with Michigan’s Prevailing Wage Act and Elliott-Larsen Civil Rights Act, prohibition of subcontracting without prior approval, and full transfer of intellectual property rights to the State. Vendors must ensure all produced materials do not infringe upon third-party rights and must certify they are not participating in any boycott prohibited under U.S. federal law. Packaging must meet specified hardwood pallet standards with defined dimensions and weight limits, and each carton must be clearly labeled with commodity number, purchase order, and piece counts. Electronic funds transfer is the sole method of payment, requiring vendor registration through the Michigan Sigma VSS portal. The contract includes indemnification clauses, force majeure provisions, and surviving obligations post-termination, but omits formal evaluation factors, award methodology, COR/COTR designations, and detailed accounting codes. No CAGE code, UEI certification, or socioeconomic status representations are required beyond the boycott compliance affirmation. All contractual terms are governed by Michigan state law, with no reference to federal military standards or typical FAR clause numbering.

POSTED

DEADLINE

in about 8 hours

LUBRICATING OIL, ENGINE

Solicitation # SPE4A6-26-T-09JP

This contract specifies the procurement of lubricating oil for engine applications under solicitation SPE4A6-26-T-09JP, with a commercial off-the-shelf (COTS) item identified by NSN 9150004871165 and part number HF825, supplied by LANXESS CORPORATION or TENNECO CHEMICALS INC. The item is classified as a TYPE 2 (CODE 9) with a shelf life of 60 months, extendable, and requires compliance with DLA packaging requirements, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with special marking code 33 indicating shelf life tracking. The unit of issue is pound (LB), with a total quantity of 6 pounds to be delivered FOB destination within 155 days, subject to a 10% quantity variance. Inspection and acceptance occur at the destination, and supply chain traceability documentation must be retained by the contractor in accordance with DLA Directive Procurement Note C03 from August 2016. The product must meet technical and quality standards referenced in the DLA Master List, including hazardous communication requirements that mandate approved Safety Data Sheets and OSHA hazard warning labels prior to contract award, with copies submitted to the DLA Aviation HMIRS office. Although FAA airworthiness approval is applicable, unique item identification is not required per customer request. Sampling must follow MIL-STD-1916, ASQ H1331, or equivalent zero-based plans with zero non-conformances unless otherwise specified. The contract includes strict configuration control and preservation requirements per RQ002, RQ017, RQ018, and RQ046, and adherence to FAA bare item marking standards. Contractual data requirements are governed by CDRL-FAACERTCOM-25015, and all materials must be palletized according to DLA packaging guidelines. The solicitation was issued on July 23, 2026, with responses due by July 31, 2026, and the point of contact is Shameka Edwards of the Department of Defense’s ASC Commodities Division.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

in about 20 hours

LUBRICATING OIL, GEA

Solicitation # SPE4A6-26-T-09HT

This contract specifies the procurement of lubricating oil for gear applications under the NSN 9150016796600, identified as a commercial off the shelf item, with a unit of issue measured in quarts. The supplier, IMPERIAL OIL CO INC, must deliver 27 quarts with a delivery timeline of 169 days FOB destination, where inspection and acceptance also occur at the destination. The item carries a Type 2 shelf life of 24 months, extendable, and is subject to strict packaging standards per MIL-STD-2073-1E and marking requirements in accordance with MIL-STD-129, including the special marking code 33 for shelf life identification. Packaging and palletization must comply with DLA’s packaging requirements, and hazardous material handling is governed by IP025, requiring SDS and OSHA-compliant hazard warning labels that must be reviewed and approved by technical personnel prior to contract award, with copies submitted to the DLA Aviation HMIRS office. Sampling and quality assurance follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required in the sample lot unless otherwise specified. Attributes are to be classified as critical, major, or minor, with corresponding verification levels or AQLs, and unspecified attributes default to major. The contract incorporates technical and quality requirements from the DLA Master List referenced via R and I numbers, including provisions for removal of government identification from non-accepted supplies and hazardous communication standards. The purchase request number is 7017572507, and the solicitation number SPE4A6-26-T-09HT was issued on July 23, 2026, with responses due by July 31, 2026. Quantity variance is strictly zero percent, and all documentation, including unit of issue conversions, must align with DLA’s authorized standards. The point of contact for this solicitation is Briana Covington of the Department of Defense’s ASC Commodities Division.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

in about 20 hours

Solid Film Lubricant Supply and DeliveryThe contract entails the supply and delivery of fifty containers of military-grade solid film lubricant, identified by NSN 9150012602534, to Subic Bay in the Philippines. The procurement is conducted under DPAS-rated FOB Destination terms, meaning the supplier bears full responsibility for transportation costs and risks until the goods arrive at the designated destination. This agreement falls under NAICS code 324191, classifying it within the petroleum and coal products manufacturing sector, and is executed as a subcontract through the Defense Logistics Agency under the Department of Defense. The posting date of the contract is July 21, 2026, indicating planned future execution, and the specific delivery point is clearly defined to ensure logistical compliance. The contract references a DIBBS award record, suggesting formal documentation and tracking through U.S. military procurement systems.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Outboard Motor Grease (NSN 9150016042761)The contract pertains to the procurement and delivery of ten containers of military-specification outboard motor grease designated by NSN 9150016042761, to be delivered to Camp Humphreys in South Korea. The product must fully comply with all applicable National Stock Number and Department of Defense logistics standards to ensure interoperability and readiness within U.S. military operations. The procurement is executed as a subcontract under the authority of the Defense Logistics Agency, operating under the Department of Defense, and falls under NAICS code 324191, indicating classification within the petroleum and coal products manufacturing sector. The contract was posted on July 21, 2026, and the place of performance is clearly defined as Camp Humphreys, though specific address details are not provided. Delivery and compliance requirements are critical to meeting operational needs in a forward-deployed military environment.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Aircraft Grease (NSN 9150009355851)The contract involves the supply and delivery of two cans of aircraft grease identified by NSN 9150009355851, fully compliant with Defense Logistics Agency specifications for formulation, packaging, and marking. The material must meet all applicable military standards to ensure suitability for use in aviation systems and is destined for delivery to Tinker Air Force Base. This subcontract falls under NAICS code 324191, indicating classification within other petroleum and coal products manufacturing. The contract is issued under the Department of Defense through the Defense Logistics Agency, with no set-aside provisions applied. The solicitation was posted on July 21, 2026, and the performance location is tied to Tinker AFB, though specific city or state details are not provided. The contractual obligations require strict adherence to DLA packaging and labeling protocols to facilitate proper handling and inventory management within the military supply chain.

Defense Logistics Agency

POSTED

DEADLINE

Engine Lubricating Oil Supply and DeliveryOne drum of NSN-compliant engine lubricating oil is to be supplied and delivered to Whiteman Air Force Base in Missouri under a subcontract awarded by the Defense Logistics Agency on behalf of the Department of Defense. The contract requires strict adherence to traceable shipping protocols and proper marking standards to ensure full accountability and compliance with military specifications. The item falls under NAICS code 324191, which categorizes it as other petroleum and coal products manufacturing, reflecting its specialized industrial origin. Delivery must meet all operational and logistical requirements set by the military supply chain, with no flexibility in content, labeling, or documentation. The contract was posted on July 21, 2026, and is part of a broader effort to maintain readiness through timely and accurate procurement of essential lubricants.

Defense Logistics Agency

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Solicitation # SPE7MC-26-T-159P

Industrial Valve Manufacturing

POSTED

about 15 hours ago

DEADLINE

Solicitation # SPE8E6-26-T-3940

POSTED

about 15 hours ago

DEADLINE

Solicitation # SPE8ES-26-T-2477

Adhesive Manufacturing

POSTED

about 15 hours ago

DEADLINE

MARKER, IDENTIFICATION

Solicitation # SPE8E6-26-T-3939

Paper Bag and Coated and Treated Paper Manufacturing

POSTED

about 15 hours ago

DEADLINE

VALVE, BUTTERFLY

Solicitation # SPE7MC-26-T-159J

Industrial Valve Manufacturing

POSTED

about 15 hours ago

DEADLINE

Solicitation # SPE3SE-26-Q-0420

POSTED

about 15 hours ago

DEADLINE

PRODUCTION LOT TESTING

Solicitation # SPE7L7-26-T-4507

The U.S. Department of Defense through DLA Land and Maritime is seeking quotes for 33 units of NSN 6140013854191, a storage battery, with delivery required to the Taiwan Army. The solicitation specifies two line items: 32 units to be delivered within 140 days after award and one additional unit to be delivered within 20 days after award. All responsible sources may submit a quote provided it is received electronically before the deadline. The solicitation, identified as SPE7L726T4507, was posted on July 30, 2026, with responses due by August 10, 2026. The procurement falls under NAICS Code 335910 for battery manufacturing and is classified as a combined solicitation with no set-aside restrictions. The contracting office is located in Columbus, Ohio, and inquiries must be directed via email to the point of contact listed in the solicitation document, with additional information accessible through the DIBBS portal.

Battery Manufacturing

POSTED

about 15 hours ago

DEADLINE

TIRE, PNEUMATIC, VEHI

Solicitation # SPE7L7-26-T-4498

Tire Manufacturing (except Retreading)

POSTED

about 15 hours ago

DEADLINE

VALVE, SAFETY RELIEF

Solicitation # SPE7MC-26-T-159Q

Industrial Valve Manufacturing

POSTED

about 15 hours ago

DEADLINE

TAPE, REFLECTIVE

Solicitation # SPE8E5-26-Q-0367

POSTED

about 15 hours ago

DEADLINE

Solicitation # SPE7MC-26-T-159N

The contract specifies the procurement of a valve assembly identified by NSN 4820-01-659-2086 and part numbers 0391023, 20841303, and LF909M1QT-Z2 1-1/2IN, supplied by Watts Regulator Co, with a single unit requirement and a firm delivery deadline of 20 days after award. Delivery is FOB destination, with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and DLA’s packaging requirements, with marking adhering strictly to MIL-STD-129 and no special markings required. Palletization and containerization follow specified codes, and shipment must use traceable transport methods; parcel post is prohibited. The delivery address is the USS HARVEY C BARNUM JR (DDG 124) at FPO AE 09591-0100, with a physical shipping address in Norfolk, Virginia. The contract is issued under solicitation SPE7MC-26-T-159N with a response deadline in August 2026 and a required delivery date of July 28, 2026. All technical and quality standards are governed by the DLA Master List referenced in the document, and the contract enforces strict compliance with defense information and supply identification protocols, including the removal of government identifiers from non-accepted items. The contract is managed by the Defense Logistics Agency, with point of contact Paula McClary, and falls under NAICS code 332911 for other fabricated metal product manufacturing.

Industrial Valve Manufacturing

POSTED

about 15 hours ago

DEADLINE

CORROSION RESISTANT

Solicitation # SPE8ES-26-T-2475

This contract specifies the procurement of a corrosion-resistant, chemically treated aluminum coating classified as Type II, Form VI, and Method D, delivered in applicator pens containing 12 units per box. The product is designed for low electrical resistance applications and must comply with MIL-DTL-81706B Rev B dated February 7, 2024, and be sourced from a manufacturer approved on the Qualified Products List QPL-81706-16. The coating is a shelf-life item with a 12-month lifespan, and all delivered units must retain at least 85% of their shelf life at the time of government receipt. Packaging and marking must adhere to MIL-STD-129R, including batch or lot numbers and special code 33 indicating Type II shelf-life status. Hazardous material handling requires compliance with OSHA’s revised Hazard Communication Standard, mandating submission of Safety Data Sheets and labels aligned with 29 C.F.R. 1910.1200 prior to contract award, along with employee training on these requirements. The product must be shipped in original manufacturer containers without chemical or physical interaction that compromises integrity, and palletization must follow DLA packaging guidelines. Delivery is FOB destination with no quantity variance allowed, inspection and acceptance occur at the destination, and the required delivery date is July 31, 2026. The NSN is 8030015609106, with two identical line items totaling two boxes, and all shipments must be marked and transported according to MIL-STD-2073-1E and IP025 requirements for hazardous materials, destined to a U.S. military facility in Yokosuka, Japan.

Adhesive Manufacturing

POSTED

about 15 hours ago

DEADLINE