This Government Contract opportunity from Department Of Defense was posted on August 5, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Supply of Specialty Pins

Closed

Federal

Submission Closed08/07/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332321

New

Federal

Bldg 1 Mechanical Room Door Upgrade

Solicitation # FA251726QA048

The Department of Defense is seeking a contractor for the Bldg 1 Mechanical Room Door Upgrade project located in Colorado Springs, Colorado. The scope of work involves replacing exterior and interior mechanical room doors as well as an auditorium control booth door, along with the installation of motion detectors and badge readers at designated locations. This solicitation, identified by number FA251726QA048, is designated as a total small business set-aside under NAICS code 332321. Interested parties must submit their responses by September 17, 2026. Primary coordination for this requirement is managed by Armand Galindez at the Peterson SFB office.

FA2517 21 Cons Bldg 350

POSTED

DEADLINE

DOOR, METAL, MARINE STRU

Solicitation # SPE7M4-26-T-394S

Solicitation SPE7M4-26-T-394S is a request for quotations issued by the Department of Defense, DLA Land and Maritime, Fluid Handling Division, for the procurement of one interior structural metal marine door, identified by NSN 2040-00-912-6749. The requirement specifies a delivery period of 168 days after receipt of the order, with shipping terms set as FOB Origin and the final delivery destination located at DLA Distribution San Diego, California. Inspection and acceptance will occur at the destination in accordance with FAR 52.246-2, utilizing sampling methods from MIL-STD-1916 or ASQ H1331, Table 1, with a requirement of zero non-conformances for acceptance. The contract is subject to strict export controls under ITAR and EAR, requiring contractors to have an approved US/Canada Joint Certification Program certification and complete specific DLA training to access technical data. Packaging must comply with MIL-STD-2073-1E and RP001 DLA packaging requirements, while marking must adhere to MIL-STD-129. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment. Offerors must comply with the Buy American Act and the Berry Amendment, and the solicitation provides a price evaluation preference for certified HUBZone small business concerns. Quotations are due by September 21, 2026, via the DIBBS system.

FLUID HANDLING DIVISION

POSTED

DEADLINE

DOOR, ACCESS, UTILITY

Solicitation # SPE7L1-26-T-10Z9

Solicitation SPE7L1-26-T-10Z9 is a request for quotations issued by the DLA Land and Maritime Land Supply Chain for the procurement of 17 utility access doors, identified by NSN 5340016482478. The items are defined by Army drawings and must adhere to TDP Rev C Gen 3 and specific reference drawings, including a requirement to use DCSC Drawing 16236 CS-2300-0001 for paint finishing in place of Army drawing specifications. The contract is a simplified acquisition with a delivery period of 208 days, establishing a required delivery date of May 28, 2027, with shipping terms set as FOB Origin. The procurement includes strict quality and technical standards, requiring manufacturer inspection systems to comply with ISO 9001 or SAE AS9003. Packaging must follow MIL-STD-129 and RP001, with specific hazardous material labeling required per the Hazard Communication Standard if applicable. Key evaluation factors include a total prohibition on items produced via additive manufacturing and a price evaluation preference for certified HUBZone small businesses. The contract also incorporates the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information. Inspection and acceptance will occur at the origin, and payment must be processed electronically through the Wide Area WorkFlow system.

POSTED

DEADLINE

Solicitation # SPE7L1-26-T-08X8

This contract is for the procurement of 371 units of rod end clevises, identified by NSN 5340-00-664-7597 and part number MS35812-11. The items must be manufactured according to the current revision of the applicable part standards, specifically NASM35812 Revision 3 and MIL-DTL-45918A. The contract specifies a delivery timeframe of 168 days after order, with a required delivery date of May 19, 2027, and a need ship date of March 9, 2027. Delivery is FOB Origin, with inspection and acceptance occurring at the destination, the DLA Distribution New Cumberland facility in Pennsylvania. The agreement mandates strict adherence to DLA technical and quality requirements, including MIL-STD-130N for identification marking and MIL-STD-129 for general marking. Packaging must comply with MIL-STD-2073-1E and RP001. Quality assurance will be managed through sampling methods such as MIL-STD-1916 or ASQ H1331. Additionally, the contract prohibits the use of Class I ozone-depleting chemicals and requires compliance with covered defense information regulations and configuration change management protocols.

POSTED

DEADLINE

Solicitation # SPE4A6-26-T-28PB

This contract is for the procurement of 90 light lenses, identified by NSN 6210-00-067-8385 and part number LC15CN3. The items must adhere to technical specifications MIL-DTL-3661/15D and MIL-DTL-3661E. Delivery is required within 171 days, with a required delivery date of December 26, 2026, and a need ship date of March 9, 2027. The shipment is to be delivered FOB Origin to the DLA Distribution facility in New Cumberland, Pennsylvania. The agreement mandates strict quality and safety standards, including a general prohibition on the intentional use of mercury or mercury-containing compounds, except where functionally required. Quality assurance and sampling must follow MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the origin. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements, specifically noting that items are fragile.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE7M5-26-T-489T

This contract solicitation, identified as SPE7M5-26-T-489T, is issued by the Department of Defense Active Devices Division for the procurement of three light emitting diodes. The specific part number is LED-BL-150W-1227-F-BLK-PIGTAIL from Larson Electronics, LLC, associated with National Stock Number 5980-01-700-3993. The procurement falls under NAICS code 332321 and requires compliance with the Buy American Act and DLA Master List technical and quality requirements. Delivery is required within 168 days after the order, with a need ship date of March 9, 2027, and an original required delivery date of May 10, 2027. The items are to be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California. Packaging and marking must adhere to MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements RP001. Inspection and acceptance will take place at the destination.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

USNS COMFORT A-60 Fire Doors

Solicitation # N3220526Q7261

The Department of Defense, through MSCHQ Norfolk, has issued solicitation N3220526Q7261 for the procurement of two A-60 rated fume tight fire doors for the USNS COMFORT. These doors must include both right-hand and left-hand reverse swing configurations with stainless steel matte finishes. The contract requires a delivery date of February 19, 2027, with responses due by September 16, 2026. This acquisition is being pursued as a non-competitive procurement under the Simplified Acquisition Threshold. Deansteel Machinery Company has been identified as the sole responsible source to ensure compliance with ABS/USCG approved T-ALT requirements and to maintain standardization with the USNS Mercy. This specific sourcing strategy is intended to avoid significant procurement delays that would result from using alternative suppliers.

POSTED

DEADLINE

Solicitation # SPE4A6-26-T-28CK

This contract, identified by solicitation number SPE4A6-26-T-28CK, is issued by the Department of Defense ASC Commodities Division for the procurement of one incandescent turn signal lamp. The item is identified by NSN 6240-01-718-9826 and corresponds to Deere and Company part number AM133169. The required delivery date is September 2, 2026, with a delivery timeframe of 10 days after receipt of order. Shipping is designated as FOB Origin, with inspection and acceptance occurring at the destination, which is the 0087 CS BN CO A Composite at Fort Stewart, Georgia. The procurement is subject to strict technical and quality requirements, including DLA packaging standards, physical identification marking, and specific sampling methods according to MIL-STD-1916 or ASQ H1331. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with a specific requirement for fragile marking. The contract specifies a zero percent quantity variance and mandates shipment via the fastest traceable means, explicitly prohibiting the use of parcel post. This item is designated as a critical application item and requires adherence to the DLA Master List of Technical and Quality Requirements.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Maritime Weathertight Door & Hatch Fabrication

Sflc Procurement Branch 3(00040)

POSTED

DEADLINE

Aluminum Parts/Components Supplier

POSTED

DEADLINE

CGC OAK WATER TIGHT DOORS, HATCHES, SCUTTLES RENEWAL

Solicitation # 70Z08526Q0027652

The United States Coast Guard Deputy Commandant for Systems, acting for the Surface Forces Logistics Center, is soliciting a firm-fixed-price service contract for the fabrication of watertight and non-watertight doors, hatches, and scuttles for the CGC OAK. All work must be performed on-site at the vessel's homeport in Newport, Rhode Island. This acquisition is a 100 percent total small business set-aside under NAICS code 332321 for metal door manufacturing, with a corresponding product service code of 2040 for marine hardware and hull items. The government will award the contract to the responsible offeror providing the lowest evaluated price among those who pass the technical capability and past performance evaluations. Technical capability is assessed on a pass/fail basis based on the offeror's understanding of the work statement and adherence to specifications. Past performance is evaluated based on satisfactory completion of similar work within the last three years, though those with no relevant experience will be considered neutral. All quotes must be all-inclusive and submitted electronically to the designated points of contact.

Sflc Procurement Branch 2(00085)

POSTED

DEADLINE

Solicitation # 70Z04026Q60268Y00

The U.S. Coast Guard Surface Forces Logistics Center is seeking quotes for a Firm Fixed Price Purchase Order to acquire five specific maritime hardware items, including various sizes of RWTQA scuttles, a RWTI hatch, and WTQA doors. All items must be manufactured according to specific NAVSEA drawings. The contract is a Small Business Set Aside and will be awarded based on best value, considering the ability to meet the full requirement, adherence to the timeframe, and price. All deliveries must be completed by December 29, 2026, and shipped FOB Destination to Baltimore, Maryland, using military-standard packaging and marking. Vendors must have an active SAM.gov registration to be eligible. Payments are set at NET 30 and must be processed through the IPP system. Total costs must include all delivery and freight charges.

Sflc Procurement Branch 3(00040)

POSTED

3 days ago

DEADLINE

in 12 days

AI Contract Overview

The contract involves the supply of specialized pins including cotter, dowel, tapered, spring, hairclip, linchpin, roll, and ejector pins, which are critical for mechanical assembly and alignment in hangar door systems. These components are essential for ensuring precise function and safety in naval maintenance and operational environments. The solicitation is designated as a Small Business Set Aside under the SBA program, meaning only small businesses are eligible to bid, promoting economic opportunity within qualified enterprises. The NAICS code 332321 categorizes this procurement under Metal Crown, Cap, Pin, and Clip Manufacturing, indicating the technical specificity of the required components. The opportunity was posted on August 5, 2026, with a response deadline of August 7, 2026, at 7:00 PM, indicating a very short turnaround time for submissions. The procurement is classified as a subcontract and is managed by the Naval Supply Systems Command Fleet Logistics Center Puget Sound, under the Department of Defense. The place of performance and organizational address details are not provided, suggesting the work may be distributed or delivered to multiple locations as needed. Bidders must ensure their products meet exacting military and mechanical standards for reliability and durability in high-stress settings. The official link for further details is accessible through the SAM.gov portal.