Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

SWITCH, WAVEGUIDE

Active
SPE7M5-26-T-366DFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of a SWITCH, WAVEGUIDE with NSN 5985-01-091-7804 and part number 153-188-0001, under solicitation SPE7M5-26-T-366D, requiring one unit to be delivered FOB origin within 111 days with no variance allowed in quantity. The item is designated as a critical application component and must comply with all DLA Master List of Technical and Quality Requirements referenced by R and I numbers, which supersede other standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 for marking and labeling, and if the item is hazardous per FED-STD-313, it must be packaged in accordance with TQ requirement IP025; otherwise, commercial packaging per ASTM D3951 is acceptable, although DLA requirements take precedence. Palletization must follow RP001 DLA Packaging Requirements. Delivery must be made to the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of February 3, 2026, and an original delivery deadline of April 2, 2026. Inspection and acceptance occur at the destination. The contractor must perform a Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment and adhere to DLA’s handling of covered defense information. The unit of issue is each (EA), and the purchase request number is 7013271884. Point of contact is Lea Dawn Robertson, and the contract falls under NAICS code 334220, issued by the Department of Defense’s Active Devices Division.

General Info

Procure one SWITCH WAVEGUIDE NSN 5985-01-091-7804, FOB origin, deliver by April 2, 2026, to New Cumberland, PA, with CMMC Level 2 compliance.

Agency

Department Of Defense → ACTIVE DEVICES DIVISIONView Agency

NAICS

334220 - Radio and Television Broadcasting and Wireless Communications Equipment ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE7M5-26-T-366D.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ACTIVE DEVICES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ACTIVE DEVICES DIVISION
View Agency Profile
Office AddressUS
Contacts
Lea Dawn Robertson
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
SWITCH,WAVEGUIDE
SWITCH,WAVEGUIDE
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD002, COVERED DEFENSE INFORMATION APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment
CRITICAL APPLICATION ITEM
MICROWAVE DEVELOPMENT LABORATORIES, 01456 P/N 153-188-0001
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7013271884 0001 EA 1.000
NSN/MATERIAL:5985010917804
DELIVERY (IN DAYS):0111
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
SPE7M5-26-T-366D
SECTION B
PR: 7013271884 PRLI: 0001 CONT’D
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:02/03/2026 Original Required Delivery Date:04/02/2026
SPE7M5-26-T-366D NSN/Part Number: 5985-01-091-7804 Quantity: 1 EA Purchase Request: 7013271884QTY: 1 Delivery: 111 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334220
New
SLED
Wireless Project
Solicitation # 094-26
Lincoln Electric System

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334220
New
DIBBS
FUSE, CARTRIDGE
Solicitation # SPE7M0-26-T-027Z
The contract is for the procurement of one cartridge fuse identified by NSN 5920-00-296-1527 and part number MB01-8 from Cooper Bussmann, LLC, classified as a commercial off-the-shelf item. Delivery is required within five days under FOB origin terms with no tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must comply with DLA’s Master List of Technical and Quality Requirements, superseding ASTM D3951, and must adhere to MIL-STD-129 labeling standards with palletization following RP001 guidelines. Hazardous material packaging must meet IP025 if applicable per Fed-Std-313, and the use of ozone-depleting chemicals is strictly prohibited. The shipment must be sent via the fastest traceable means, excluding parcel post, to the specified delivery point in Raleigh, North Carolina. The contract reference is SPE7M0-26-T-027Z, with an original required delivery date of July 7, 2026, and the primary point of contact is Audrey Acuna. Unit of issue is each, and all documentation must align with DoD authorized units as defined in the official DLA reference.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334220
New
DIBBS
ANTENNA
Solicitation # SPE7M5-26-T-365Z
This contract, issued under solicitation number SPE7M5-26-T-365Z, pertains to the procurement of two diamond antennas with NSN 5985-01-717-2043, supplied by AFP Industries Inc and Diamond Antenna & Microwave Corporation under part number D220R. The delivery is required within 20 days of contract award, with FOB origin terms and no variance allowed in quantity—exactly two units must be delivered. Inspection and acceptance both occur at the destination, with packaging mandated to comply with MIL-STD-2073-1E, including specific preservation, wrapping, and containment standards, and marking required to meet MIL-STD-129 without any special identification codes. Packaging and palletization must adhere to DLA’s standard procurement requirements, and shipment must be traceable—parcel post is strictly prohibited. The delivery address is the Distribution Management Office at Camp Lejeune, North Carolina, with specific reference codes and freight identifiers provided for logistics tracking. The original required delivery date is December 12, 2025, and technical and quality standards are governed by the DLA Master List referenced in the contract. The contract is classified under NAICS code 334220, managed by the Department of Defense’s Active Devices Division, with Matthew Stanko as the primary point of contact.
ACTIVE DEVICES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334220
New
DIBBS
AMPLIFIER, RADIO FRE
Solicitation # SPE7M1-26-Q-1320
The contract solicitation is for an AMPLIFIER, RADIO FRE with NSN/Part Number 5996-01-337-1120, requesting a quantity of two units under Purchase Request 7015536734. The solicitation, identified by number SPE7M1-26-Q-1320, was posted on August 3, 2026, with a response deadline of August 18, 2026. It is issued by the Defense Logistics Agency under the Department of Defense and classified as a federal solicitation without a specified set-aside type or NAICS code. The place of performance and office address information are not provided, and the point of contact details are empty. Interested parties must submit responses via the DIBBS portal using the provided UI link before the deadline.
Defense Logistics Agency

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334220
New
DIBBS
TELEVISION SET
Solicitation # SPE4A7-26-T-608J
This contract governs the procurement of 166 television sets identified by NSN 5820-01-652-3863 and part number PN-E759 from SHARP ELECTRONICS CORP, classified as a commercial off-the-shelf item. The television sets must comply with technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on acquisition size. Packaging must conform to MIL-STD-2073-1E and DLA packaging requirements, including specific preservation methods, material codes, and labeling per MIL-STD-129, with a fragile marking designation. The items are to be delivered FOB origin within 134 days of the contract award, with no tolerance for quantity variance, and inspected and accepted at the destination facility in New Cumberland, Pennsylvania. Sampling for quality assurance follows MIL-STD-1916 or equivalent zero-based plans, with critical, major, and minor attributes assigned verification levels or AQLs as specified; unspecified attributes default to major. The contractor must also complete a Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment. Delivery is mandated by October 17, 2025, with the original required delivery date set for February 24, 2026, and transportation logistics are governed by DLA procedural notes.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334220
New
DIBBS
BASE, ANTENNA SUPPOR
Solicitation # SPE7M5-26-T-347L
The contract pertains to the procurement of five antenna support bases, identified by NSN 5985-01-621-3702, under solicitation SPE7M5-26-T-347L, issued by the Department of Defense’s Active Devices Division through the Defense Logistics Agency. Delivery is required within 168 days of government direction, with an original required delivery date of January 23, 2027, and a need ship date of January 19, 2027. All items must be delivered FOB destination to the DLA Distribution facility at 2083 Normandy Drive, Door 113 to 134, New Cumberland, PA 17070-5002, with inspection and acceptance occurring at the destination. The quantity is fixed at five units with no variance allowed. Packaging must adhere strictly to DLA Master List of Technical and Quality Requirements, which supersede commercial standards. Non-hazardous items must be packaged per ASTM D3951, while hazardous materials, as defined by FED-STD-313, must comply with TQ requirement IP025. All packaging, including palletization, must conform to RP001 and be marked and labeled in accordance with MIL-STD-129, including standardized barcoding. Hazardous materials require compliance with the Hazard Communication Standard (29 CFR 1910.1200), and any item containing radioactive material above 0.002 microcuries per gram or 0.01 microcuries per item must be disclosed in writing prior to delivery. The unit of issue is each, with a proposed price of $5.00 per unit, though the total contract value is not finalized. Payment will be processed through WAWF, and compliance with a suite of FAR and DFARS clauses is mandatory, including those covering trafficking in persons, employment eligibility, sustainable products, security of government work product, whistleblower rights, former official compensation restrictions, and NIST SP 800-171 cybersecurity controls. The offeror must possess a valid Unique Entity Identifier and CAGE code and must disclose any provision of covered defense telecommunications equipment or services. The contract includes deviation-based clause alternatives and applies to a simplified acquisition, with the DLA Master List revision as of the solicitation issue date controlling. No option quantities or indefinite-delivery terms are specified.
ACTIVE DEVICES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334220
New
DIBBS
SUPPLEMENTARY KIT, R
Solicitation # SPE4A7-26-T-608N
This contract is for the procurement of a Supplementary Kit for Radio and Television Communication Equipment under NSN 5820-01-627-8968, with a quantity of 2,000 units to be delivered within 20 days of award. The solicitation, identified as SPE4A7-26-T-608N, was posted on August 3, 2026, with responses due by August 11, 2026, and is managed by the Department of Defense’s ASC Supplier Oper AE and AF Division. Technical and quality requirements referenced in the document are drawn from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The contract mandates strict compliance with DLA packaging standards, Cybersecurity Maturity Model Certification Level 2 through a certified third-party assessment organization, and tailored higher-level quality requirements applicable to both manufacturers and non-manufacturers. The supplier must furnish a Certificate of Quality Compliance for each manufacturing lot, adhering to the Supplemental Quality Assurance Provision, and provide one physical copy with each delivery while uploading an electronic version to the iRAPT system via the Receiving Report attachment tab. For government-inspected shipments, the certificate must be available for review at the point of acceptance and may be used by government representatives to approve the WAWF receiving report if all documentation is properly submitted. Configuration changes require formal deviation requests through Edgewood’s Chemical, Biological Center process, and all items must be marked per physical identification standards, though Item Unique Identification is not required per customer directive under DFARS 252.211-7003(c)(1)(i). Non-accepted supplies must have all government identification removed, and all data and documentation costs are included in the unit price. The place of performance is Fort Carson, Colorado, with Renee Bynum as the primary point of contact.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334220
New
DIBBS
BASE, ANTENNA SUPPORT
Solicitation # SPE7M5-26-T-366P
The contract specifies the procurement of 16 units of a BASE, ANTENNA SUPPORT with NSN 5985-01-493-6875 and part number 7030583-1 under solicitation SPE7M5-26-T-366P, with a unit price of $16.00 and a total price of $256.00. Delivery is required FOB origin within 157 days, with no variance allowed in quantity, and inspection and acceptance occur at the destination. The item is classified as a commercial item per FAR Part 2.101, and all packaging must comply with DLA Master List of Technical and Quality Requirements, which override ASTM D3951; non-hazardous items must be commercially packaged per ASTM D3951 while hazardous items must meet Fed-Std-313 and TQ requirement IP025. All packaging and labeling must follow MIL-STD-129 and palletization must adhere to RP001. The specified delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, and the required delivery date is January 19, 2027, with an original required date of January 4, 2027. Cybersecurity Compliance requires a CMMC Level 2 Self-Assessment, and all technical and quality obligations referenced by R or I numbers are governed by the DLA Master List in effect on the applicable date. The Unit of Issue is each (EA), and transportation details must follow DLAD Proc Note C19 and C20.
ACTIVE DEVICES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334220
New
DIBBS
ADAPTER, CONNECTOR
Solicitation # SPE7M5-26-T-340P
The contract is for the procurement of 620 units of an adapter and connector item identified by NSN 5935-00-739-2242, with a delivery requirement of 168 calendar days from the award date, and a need ship date of January 19, 2027, with an original required delivery date of January 22, 2027. The item must conform to technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, and the specification includes multiple vendor part numbers such as UG-349A/U, R191419, RT510-073.00, Q 5 3142 7065, J01008A0824, and 33BNC-N-50-1, indicating interchangeability among approved suppliers. The use of Class I ozone-depleting substances in any manufacturing or processing step is strictly prohibited unless prior written approval from the contracting officer is obtained, though this restriction does not apply to commercial items as defined in FAR 11.001 or to part-number-only items. Packaging must comply with MIL-STD-2073-1E using a unit pack code U, with preservation method 41 (clean and dry), no cushioning, and individual wrapping. Marking must adhere to MIL-STD-129 with no special marking code, and bare item marking per RQ017 is required. All items must be palletized according to DLA Packaging Requirements for Procurement (RP001). Delivery is FOB origin with inspection and acceptance occurring at the destination, and the delivery address is the DLA Distribution DDSP New Cumberland Facility in New Cumberland, Pennsylvania. Invoicing is mandatory through Wide Area WorkFlow (WAWF), and the contracting officer has not specified a unit or total price in the CLIN. The solicitation number is SPE7M5-26-T-340P, issued on August 3, 2026, with proposals due by August 6, 2026, and must be submitted electronically via the DLA Internet Bid Board System. The contract incorporates numerous FAR and DFARS clauses including those related to equal opportunity, trafficking in persons, employment eligibility verification, sustainable products, hazardous material identification, authorization and consent, unenforceability
ACTIVE DEVICES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334220
New
DIBBS
ANTENNA
Solicitation # SPE7M5-26-T-365X
The contract is for the procurement of four antennas identified by NSN 5985-01-412-9036 under solicitation SPE7M5-26-T-365X, with a deadline for responses on August 14, 2026, and a required delivery within 71 days after award. The requirement is governed by DLA packaging standards and incorporates technical and quality specifications referenced in the DLA Master List of Technical and Quality Requirements, which must be accessed online and applied according to revision dates tied to the solicitation or award timeline. The contractor must submit a complete data package covering both the approved part and any alternate part, and must comply with protocols for removing government identification from non-accepted supplies. The solicitation is issued by the Department of Defense’s Active Devices Division, with performance located in New Cumberland, Pennsylvania, 17070-5002, and primary point of contact is Matthew Stanko, reachable via email and phone. The NAICS code 334220 indicates this falls under communications equipment manufacturing, and all submissions must adhere to the structured procurement framework outlined by the Defense Logistics Agency.
ACTIVE DEVICES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334220
New
Federal
Software-Defined Radio (SDR) and Modem IntegrationThe contract seeks software-defined radio solutions designed to advance digitization and waveform processing for satellite communications, ensuring full compatibility with the U.S. Air Force Battle Network requirements. The focus is on integrating modern SDR and modem technologies that enable secure, agile, and interoperable SATCOM capabilities in contested environments, with an emphasis on hardware and software that can dynamically adapt to evolving military communication protocols and spectral challenges. The solution must support rapid reconfiguration, encrypted data transit, and seamless integration with existing and future battlefield command and control architectures. The opportunity is structured as a subcontract under the Department of Defense, managed by FA8691 Aflcmc Wink Sensors, with performance expected to center in Colorado Springs. The solicitation was posted on August 3, 2026, and responses are due by August 18, 2026, under NAICS code 334220, which pertains to communications equipment manufacturing. While no set-aside designation or point of contact is specified, the technical scope demands proven expertise in military-grade SDR development, waveform engineering, and adherence to DoD network standards, requiring bidders to demonstrate technical maturity, system validation capabilities, and experience in supporting high-intensity operational scenarios.
FA8691 Aflcmc Wink Sensors

POSTED

about 23 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334220
New
Federal
Supply of A-MLS Capable Single Ear Dynamic HeadsetsThe contract calls for the supply of two single-ear dynamic aviation headsets featuring an XLR 4-pin connector, a dynamic microphone, a boom switch, and A-MLS capability, with performance requirements matching or exceeding those of the Clear-Com CC-300-X4 model. These headsets are intended for use in aviation environments where reliable audio communication and noise reduction are critical, and the inclusion of A-MLS ensures compatibility with advanced military communication systems. All components must meet strict technical and durability standards to support operational readiness in high-stress conditions. This is a small business set-aside subcontract under NAICS code 334220, issued by the Department of Defense under the FA4861 99 Cons Lgc agency, with performance required at Indian Springs, Nevada, 89018. The solicitation was posted on August 3, 2026, and responses must be submitted by August 17, 2026, at 5:00 p.m. The contract is structured to prioritize procurement from small businesses, aligning with SBA guidelines, and the absence of a designated point of contact suggests submissions should follow standard federal procurement protocols for this type of solicitation.
FA4861 99 Cons Lgc

POSTED

about 23 hours ago

DEADLINE

in 13 days
View Details

More opportunities from Department Of Defense → ACTIVE DEVICES DIVISION

Same awarding agency

NAICS: 334419
New
DIBBS
Electrical Grounding Strip Manufacturing and SupplyThe contract entails the manufacture and delivery of a single electrical grounding strip identified by NSN 5999-01-738-6818, which must adhere strictly to all applicable military standards for packaging, marking, and documentation. Delivery is required within 20 days after contract award, with terms specified as FOB Destination, meaning the supplier assumes responsibility for all costs and risks until the item reaches the designated delivery point. The item is classified under NAICS code 334419, indicating it falls within the category of other electronic component manufacturing, and the solicitation is structured as a subcontract under the Department of Defense, specifically managed by the Active Devices Division. The place of performance is listed as FPO with a ZIP code of 34091, suggesting delivery to a military postal address, likely for overseas or deployed operations. The solicitation was posted on August 3, 2026, with a response deadline of August 17, 2026, leaving a two-week window for offer submission.
Other Electronic Component Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 13 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance & Safety Data Sheet (SDS) ManagementThe contract requires the provision of comprehensive regulatory compliance services for hazardous materials, with a primary focus on the preparation, validation, and ongoing maintenance of Safety Data Sheets in strict alignment with OSHA 29 CFR 1910.1200, DFARS 252.223-7001, and MIL-STD-129 standards. This includes ensuring all documentation meets federal requirements for hazard communication, material handling, and labeling, particularly for defense-related operations and supply chains. The work must support accurate, current, and compliant SDS documentation across all phases of product lifecycle management, with an emphasis on regulatory accuracy and audit readiness. The contract is classified as a subcontract under NAICS code 541690, with a response deadline of August 14, 2026, and performance to be conducted at a designated location in Dulles, Virginia, with a zip code of 20166-7629. It is issued by the Active Devices Division under the Department of Defense, indicating a direct connection to defense logistics and procurement activities. The services are critical to ensuring compliance across military and civilian supply chains, and contractors must demonstrate expertise in federal hazardous materials regulations and experience with DoD-specific documentation protocols.
Other Scientific and Technical Consulting Services

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 488999
New
DIBBS
International Freight and Delivery Logistics (FOB Origin)The contract entails the coordination and execution of international freight and delivery logistics for shipments destined to Israel, with all responsibilities beginning at the origin point under FOB terms. The contractor is required to manage comprehensive export documentation and strictly adhere to Department of Defense compliance requirements throughout the transportation process. This subcontract is classified under NAICS code 488999, indicating it involves other support activities for air, rail, and water transportation, and is issued by the Active Devices Division of the Department of Defense. The solicitation was posted on August 3, 2026, with responses due by August 14, 2026, and the place of performance is tied to the origin point of shipment and final delivery in Israel, with no specific location details provided beyond the destination country. The contract does not specify a set-aside type or point of contact, and all participation must align with DOD regulatory and security protocols.
All Other Support Activities for Transportation

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance and LabelingThis contract requires compliance with OSHA’s Hazard Communication Standard 29 CFR 1910.1200 and applicable DFARS clauses for the identification, classification, and labeling of hazardous components. The work involves ensuring all chemical substances and mixtures used or handled under the subcontract are accurately assessed for health and physical hazards, properly classified according to GHS standards, and labeled with standardized hazard statements, pictograms, and precautionary information. The contractor must maintain documentation that supports the classification process and aligns with federal regulatory requirements for defense-related supply chains. The contract is issued under NAICS code 541690 for other scientific and technical consulting services and is structured as a subcontract within the Department of Defense’s Active Devices Division. It is open for response until August 14, 2026, with the solicitation posted on August 3, 2026. Performance location details are unspecified, but the work is expected to support defense material handling and supply chain integrity. All deliverables must meet stringent compliance benchmarks to ensure workplace safety and regulatory alignment across DoD operations.
Other Scientific and Technical Consulting Services

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 561910
New
DIBBS
Military Marking and Labeling ServicesThe contract pertains to the application of military-compliant markings and labels in accordance with MIL-STD-129, requiring precise implementation of data matrix barcodes, handling instructions, and hazardous material warnings to ensure proper identification and safety throughout the supply chain. This work is essential for compliance with Department of Defense standards and must be executed with accuracy to support logistics, storage, and transportation of military equipment and supplies. The solicitation is issued as a subcontract under NAICS code 561910, indicating it falls within miscellaneous business support services, and is managed by the Active Devices Division within the Department of Defense. The opportunity was posted on August 3, 2026, with a firm response deadline of August 14, 2026, and performance will occur at an unspecified location governed by defense logistics requirements. Although no specific place of performance or point of contact is provided, the work will be conducted under the auspices of the Defense Logistics Agency and must adhere to all regulatory and technical specifications tied to military labeling protocols. Interested parties are directed to the DIBBS portal for full solicitation details.
Packaging and Labeling Services

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 561910
New
DIBBS
Military-Compliant Packaging and PreservationThe contract requires the packaging of delivered connectors in strict compliance with MIL-STD-2073-1E standards for preservation, handling, and transport, ensuring all materials and methods used are officially approved for military applications. This effort is focused on maintaining the integrity and functionality of the connectors throughout storage and transit by adhering to rigorous environmental and procedural controls outlined in the standard. The work must be performed under the specifications mandated by the Department of Defense’s Active Devices Division and is classified as a subcontract under NAICS code 561910, which covers support services for packaging and preservation. Proposals must be submitted by the stated deadline of August 14, 2026, and the solicitation was posted on August 3, 2026. There are no set-aside designations or specified geographic restrictions for performance, and the physical location of performance is not defined in the provided details. The contract is accessible through the DIBBS platform under solicitation number SPE7M526T365U, and while no point of contact is listed, bidders are expected to follow all federal and military packaging protocols without deviation. The success of this contract hinges on flawless execution of preservation techniques and documentation aligned with military-grade logistics requirements.
Packaging and Labeling Services

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335312
New
DIBBS
Manufacturing of Electrical Receptacle ConnectorsThe contract requires the fabrication and assembly of ten units of military-spec electrical receptacle connectors meeting the National Stock Number 5935016645750 and all associated technical and performance standards. These connectors must adhere to stringent defense-grade specifications to ensure reliability, durability, and interoperability in operational environments. The work is structured as a subcontract under the NAICS code 335312, which classifies it within the electrical equipment manufacturing sector, and is managed by the Active Devices Division within the Department of Defense. The solicitation was posted on August 3, 2026, with a response deadline of August 14, 2026, giving potential bidders a defined window to submit proposals. The place of performance and point of contact details are not specified, but the contract is accessible via the DIBBS portal for full documentation and submission. There is no set-aside designation or procurement preference indicated, meaning the opportunity is open to all qualified suppliers capable of meeting the technical and production requirements.
Motor and Generator Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 484220
New
DIBBS
Logistics and Delivery to DLAThe contract requires the final shipment and delivery of packaged resistors to the Defense Logistics Agency through established logistics channels, utilizing DLA’s Vendor Shipment Module and AMPS registration to ensure compliance with federal supply protocols. All deliveries must be routed to Hill Air Force Base, specifically to the zip code 84056-5734, and must adhere strictly to DLA’s procedural and documentation standards to facilitate seamless receipt and inventory integration. This subcontract, classified under NAICS code 484220 for truck transportation, is issued by the Active Devices Division within the Department of Defense and carries a response deadline of August 14, 2026, with the solicitation posted on August 3, 2026. Contractors must confirm their AMPS registration status and validate logistics pathways in advance to avoid delivery delays or contract noncompliance.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 561990
New
DIBBS
Packaging and Labeling Services for Defense ElectronicsThe contract requires the provision of packaging and labeling services for resistor units in strict compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for labeling, ensuring all units meet Department of Defense standards for durability, traceability, and uniformity. Hazard communication labels and Safety Data Sheets must be included wherever applicable, aligning with regulatory requirements for safe handling and transport of defense electronics components. The work is to be performed at Hill Air Force Base with a zip code of 84056-5734, and all deliverables must be ready to support military logistics and inventory systems without deviation. This subcontract is issued under NAICS code 561990 and is managed by the Active Devices Division under the Department of Defense. The solicitation was posted on August 3, 2026, with a mandatory response deadline of August 14, 2026. All proposers must demonstrate full capability to meet the technical specifications, including compliance with military standards for both internal packaging integrity and external labeling accuracy. Failure to adhere to any requirement may result in rejection, and successful contractors must be prepared to support ongoing defense supply chain operations with consistent, auditable quality.
All Other Support Services

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334418
New
DIBBS
Manufacture and Supply of Fixed Wire ResistorsThe contract calls for the manufacture and delivery of seven fixed wire resistors with the National Stock Number 5905010619055, manufactured to meet the technical, packaging, and marking standards set by the Defense Logistics Agency, including adherence to J-STD-609 and RP001 specifications. All units must be produced and packaged in strict compliance with these military-grade requirements to ensure interoperability and quality assurance for defense applications. The place of performance is designated as Hill Air Force Base with ZIP code 84056-5734, indicating where the finished product must be delivered or where operational integration is expected. The solicitation, issued under the NAICS code 334418 for other electronic component manufacturing, is classified as a subcontract and was posted on August 3, 2026, with responses due by August 14, 2026. The contracting activity is managed by the Active Devices Division within the Department of Defense, and the opportunity is accessible through the DIBBS platform under solicitation reference SPE7M526T365M.
Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541690
New
DIBBS
Hazard Communication & SDS Compliance SupportThe contract requires the preparation and submission of Safety Data Sheets and hazard warning labels for electronic components, ensuring full compliance with OSHA 29 CFR 1910.1200, DFARS, and Federal Standard No. 313. This work involves accurately documenting chemical hazards, proper classification, and clear labeling of materials to meet federal regulatory standards for workplace and defense supply chain safety. All deliverables must align with the specific formatting, content, and dissemination requirements mandated by these regulations to support safe handling, storage, and usage across military and contractor environments. This subcontract is issued by the Active Devices Division under the Department of Defense with a place of performance designated as FPO, ZIP 96663. It is classified under NAICS code 541690 for other scientific and technical consulting services, indicating a need for specialized regulatory and technical expertise. The solicitation was posted on August 3, 2026, with responses due by August 14, 2026, and is available through the DIBBS system. While no set-aside type is specified, the contract is intended for qualified subcontractors capable of delivering compliant hazard communication documentation under defense supply chain requirements.
Other Scientific and Technical Consulting Services

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 488999
New
DIBBS
Military-Compliant Packaging and Labeling ServicesThis contract requires the provision of military-compliant packaging, preservation, kitting, palletization, and labeling services for electronic components in accordance with DLA RP001, MIL-STD-129, and MIL-STD-2073-1E standards to support military logistics operations. All work must adhere strictly to Department of Defense specifications to ensure compatibility with military supply chain requirements, including proper labeling, unitization, and environmental protection of sensitive electronic parts during transit and storage. The services are intended for shipment via military channels and must meet rigorous durability, traceability, and compliance benchmarks to facilitate seamless handling at military facilities. The contract is classified as a subcontract with a NAICS code of 488999 and is being managed by the Active Devices Division under the Department of Defense. The place of performance is designated as FPO with a ZIP code of 96663, indicating delivery to a military post office location, typically for overseas or expeditionary use. Responses are due by August 14, 2026, with the solicitation posted on August 3, 2026. Interested parties must submit proposals through the DIBBS platform using the provided link to be considered for award, and compliance with all military packaging and labeling regulations is non-negotiable for contract fulfillment.
All Other Support Activities for Transportation

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details