Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Systems Engineering & Technical Documentation

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract under the title Systems Engineering & Technical Documentation encompasses a broad range of technical services essential to the full system lifecycle, including requirements management, technical documentation, configuration management, and support for technical reviews. These services are critical for ensuring accurate, consistent, and traceable engineering practices across all phases of development, integration, and sustainment. The work involves close collaboration with technical teams to produce and maintain high-quality documentation, enforce configuration control, and facilitate structured reviews that uphold system integrity and compliance. This is a subcontract awarded by the Naval Air Warfare Center Air Division, part of the Department of Defense, operating under NAICS code 541330 for engineering services. The contract is set to be posted on July 28, 2026, with performance expected to occur at a location designated as 0, though specific city or state details are not provided. The nature of the work suggests involvement in complex defense systems requiring stringent technical oversight and documentation standards, with the subcontractor expected to deliver reliable support that aligns with federal and military engineering protocols.

General Info

Subcontract for defense systems engineering and technical documentation to support lifecycle compliance and reviews.

Agency

Department Of Defense → Naval Air Warfare Center Air DivisionView Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

0, MD, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 28

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Naval Air Warfare Center Air Division

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Naval Air Warfare Center Air Division

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Requirements management, technical documentation, configuration management, and support for technical reviews across the system lifecycle.

Similar Contracts

Same NAICS industry code

Construction Management Services IDIQThe Port of Seattle is seeking qualified firms to provide Construction Management services under an Indefinite-Delivery, Indefinite-Quantity (IDIQ) contract to support major construction projects across various phases including planning, design, construction, and closeout. These services will encompass a range of delivery methods such as Design Build, Progressive Design Build, and other alternative project delivery formats, with the primary goal of ensuring projects adhere to authorized schedules, budgets, and quality standards. The contract is intended to streamline oversight and coordination for the Port’s extensive capital improvement initiatives, requiring technical expertise in managing complex infrastructure developments. Primary point of contact for this opportunity is Hala Rabbo, who can be reached via email or phone, with additional support available from Project Manager Ann Davidson. The solicitation is classified under NAICS code 541330, which designates architectural, engineering, and related services. Although the contract is currently posted as a forecast with no official solicitation number or set-aside details, interested parties are encouraged to monitor the provided UI link for updates and future formal solicitations. The performance location will be at various Port of Seattle facilities and project sites, with no specific city or state specified in the metadata, indicating broad geographic scope across Port operations.

Construction Management

POSTED

about 1 hour ago

DEADLINE

Retro-Commissioning, TAB, Controls, and Regulatory Support IDIQThe consultant will deliver retro-commissioning, test/adjust/balance, controls, and regulatory support services across Seattle-Tacoma International Airport’s facilities and infrastructure systems, ensuring optimal performance in a continuous 24/7/365 operational environment. The scope includes identifying and correcting deficiencies in mechanical, HVAC, plumbing, lighting, Direct Digital Controls, smoke control, and fire protection systems to enhance efficiency, comfort, reliability, and lifespan while maintaining compliance with safety and regulatory standards. Services are delivered through Service Directives and require close collaboration with Aviation Facilities and Infrastructure to meet project deliverables. Work will be managed under an Indefinite-Delivery/Indefinite-Quantity contract, with the Port of Seattle’s Aviation Facilities and Infrastructure team as the primary point of contact. The procurement is classified under NAICS code 541330, reflecting professional, scientific, and technical services related to engineering. Key contacts include Jason Gates as the primary point of contact and Jim Farris as the project manager, both reachable through the Port of Seattle’s official communications. The solicitation was posted on July 31, 2026, with performance expected to occur at the airport location, though specific geographic details are not defined in the provided data.

Aviation Facilities & Infrastructure

POSTED

about 1 hour ago

DEADLINE

Quality Assurance and Inspection Services (Sub-tier Support)The contract entails providing independent quality assurance and inspection services as a sub-tier support to ensure compliance with DLA and MIL-STD standards across multiple stages of manufacturing and delivery. Key responsibilities include conducting first article inspections to validate initial production samples, performing in-process checks to maintain consistent quality during production, and executing final acceptance testing to confirm that end products meet all technical and performance specifications. Additionally, the contractor is required to review all associated documentation for accuracy and completeness and to systematically track, report, and manage non-conformances to ensure timely resolution and prevent recurrence. The work must be executed with precision and adherence to federal defense procurement standards, ensuring that all deliverables are traceable, auditable, and fully compliant with applicable military specifications. This subcontract is issued under NAICS code 541330 and is associated with the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The solicitation was posted on July 31, 2026, with responses due by August 31, 2026. Although specific location details and point of contact information are not provided, performance is expected to align with the needs of the defense supply chain, likely involving coordination with prime contractors and defense manufacturing facilities. Participation requires demonstrated expertise in military quality systems and the ability to operate independently within a highly regulated environment, ensuring that all inspection and assurance activities support mission-critical defense outcomes.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 13 hours ago

DEADLINE

in about 1 month

Government First Article Testing (FAT) SupportThis contract supports Government-conducted Factory Acceptance Testing for up to two units, requiring the contractor to ensure full site access, provide comprehensive documentation, and deliver test-ready units ready for evaluation. The effort is tied to the Government’s First Article Testing process and demands coordination to meet all technical and procedural requirements necessary for successful FAT execution. The work is classified as a subcontract under a Total Small Business Set-Aside, meaning only small businesses as defined by the SBA are eligible to respond. The North American Industry Classification System code 541330 designates the scope as engineering services, aligning with technical support and testing services for defense-related systems. The contract was posted on July 31, 2026, with a response deadline of August 28, 2026, and is administered by the Department of Defense under the ASC SUPPLIER OPER AE AND AF DIV. The place of performance and point of contact details are not specified, indicating potential flexibility or site-specific arrangements to be determined post-award.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 13 hours ago

DEADLINE

Quality Assurance and Inspection ServicesThe contract seeks third-party quality assurance support to ensure full compliance with ISO 9001:2015 standards, MIL-STD-1916 sampling procedures, and zero-defect acceptance criteria specifically for government inspection readiness. The service provider will be responsible for implementing and verifying quality control processes that align with these rigorous standards to prepare for and pass formal military and government inspections. Attention must be paid to systematic documentation, traceability, and defect prevention across all stages of production or service delivery to meet the zero-defect mandate. This is a subcontract under the NAICS code 541330, issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with a response deadline of August 31, 2026. The place of performance and specific location details are not provided, indicating flexibility in where services may be rendered as long as compliance requirements are met. Proposals must demonstrate proven experience in supporting defense-related quality systems, with clear methodologies for auditing, sampling, and defect resolution that align with federal inspection protocols. All activities must be designed to ensure uninterrupted readiness for government evaluation at any time.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 13 hours ago

DEADLINE

in about 1 month

Advance Notice: N6660426R3107 Code 45 Structural Modeling, Acoustics, Shock, and Hydrodynamics (SMASH) services

Solicitation # N6660426R3107

Nuwc Division Newport

POSTED

about 18 hours ago

DEADLINE

DMS Tech Manual Updates

Solicitation # N64498-26-RFPREQ-PD-42-0187

The Naval Surface Warfare Center, Philadelphia Division is seeking to update Technical Manuals for the LCS 6-38 class of ships under a sole-source procurement from Defense Maritime Systems, the Original Equipment Manufacturer, due to their exclusive knowledge and capability to perform the work. The contract will be issued as a Firm-Fixed-Price Basis of Agreement under FAR 6.302-1, with no competitive bidding, and services will be performed at the contractor’s facility in Chesapeake, Virginia. The effort is classified under NAICS code 541330 with a small business size standard of 1,250 employees and falls under Product Service Code R425. All offerors must be registered in the System for Award Management, and proposals must include both technical and price components. The solicitation, identified as N64498-26-RFPREQ-PD-42-0187, was posted on July 31, 2026, with a response deadline of August 14, 2026. The work is managed by the Department of Defense through the NSWC Philadelphia Division office located in Philadelphia, Pennsylvania. Primary point of contact is Taylor Sloan, reachable via phone or email, with Michael R. Sommeling listed as secondary contact. The requirement is not set aside for small businesses, and the procurement follows a presolicitation process leading to formal RFP issuance in August 2026, aligning with the anticipated timeline for contract award and execution.

Nswc Philadelphia Division

POSTED

about 18 hours ago

DEADLINE

C1AZ--657A4-26-123, Correct Structural Deficiencies and Renovate Building 8

Solicitation # 36C25526R0163

The U.S. Department of Veterans Affairs is seeking qualified Service-Disabled Veteran-Owned Small Business (SDVOSB) architectural and engineering firms to respond to a pre-solicitation notice for Project 657A4-26-123, which aims to correct structural deficiencies and renovate Building 8 at the John J. Pershing VA Medical Center in Poplar Bluff, Missouri. This effort is restricted exclusively to SDVOSB firms verified in the SBA’s certification database, and proposals must be submitted via a completed Standard Form 330, including detailed resumes of key personnel, organizational charts, a design quality management plan, and a compliance certification under VAAR 852.219-75 limiting subcontracting to no more than 50% of government payments to non-SDVOSB entities. The project involves a comprehensive site investigation to determine whether renovation or full demolition and reconstruction of the 8,000-square-foot building is the most cost-effective solution, with any new structure required to match the original footprint and square footage. Design work must adhere to all current VA standards, federal codes for life safety, structural integrity, and physical security, and comply with VHA Construction Publications. Selection will be based on six evaluation criteria in descending importance: professional qualifications of the proposed team, specialized experience in healthcare and similar facility projects, capacity to perform the work within the required 365-day design timeline without compromising ongoing commitments, documented past performance on government and private sector projects, accuracy in construction cost estimating, and a clean record of claims, terminations, or litigation related to engineering services. Firms must submit the SF330 electronically by August 21, 2026, and must be actively registered in the System for Award Management (SAM), certified in the SBA database, and compliant with E-Verify and EPLS requirements to ensure all personnel are eligible for federal contracts. The anticipated construction contract value is between $10 million and $20 million, with the design phase to be performed under a Firm Fixed Price contract. No additional project details or solicitation documents are available at this time, and inquiries must be sent exclusively via email to the designated contracting personnel. The NAICS code is 541330, with a size standard of $25.5 million, and no reimbursement will be provided for proposal preparation costs.

255-NETWORK Contract Office 15 (36C255)

POSTED

about 18 hours ago

DEADLINE

Mid-Atlantic Regional Maintenance Center (MARMC) Technical and Professional Services

Solicitation # N5005426R0006

This solicitation seeks technical and professional support services for the Mid-Atlantic Regional Maintenance Center in Norfolk, Virginia, under the Seaport-NxG Multiple Award Contract, with all bids restricted to service-disabled veteran-owned small businesses. The requirement is administered by the Department of Defense through the Mid Atlantic Reg Maintenance Ctr, with the solicitation number N5005426R0006 and a NAICS code of 541330 for scientific and technical consulting services. All responses must include the offeror’s active Seaport-NxG contract number, and submissions are governed by the full terms of the Seaport-NxG IDIQ contract, with only task order-specific clauses expanded in this document. The deadline for proposals is August 3, 2026, at 6:00 PM EST, following an amendment that extended the deadline for questions to July 17, 2026, and incorporated PIEE language. Attachments required for submission include the QASP, DD254, multiple CDRLs specifying status and end-of-task reporting, a staffing plan, past performance references, a price proposal, and the SF1408-14f form. Point of contact for inquiries includes Cindy T. Sampson and Jake Grady, both affiliated with the Navy. The place of performance is fixed in Norfolk, Virginia, and while the estimated contract value and detailed evaluation criteria are not available due to system limitations, the structure and documentation requirements indicate a rigorous oversight framework for contractor performance and deliverables.

Mid Atlantic Reg Maintenance Ctr

POSTED

about 18 hours ago

DEADLINE

Industry Day - Advanced Payload Integration Capabilities for Future Submarines

Solicitation # N00024-26-R-6250

The U.S. Navy, through the Director, Submarine Programs, is hosting a classified Industry Day on September 29–30, 2026, at Systems Planning and Analysis in Alexandria, Virginia, to gather specialized technical input on payload integration for future submarine platforms. This event targets industry partners capable of addressing complex challenges in logistics, stowage, command and control, platform integration, safety, and lifecycle design for advanced payloads, with emphasis on operability during underway conditions and seamless compatibility with host submarine systems. Participation is restricted to U.S. citizens with active SECRET or higher clearances, and no interim clearances will be accepted. The Government is not soliciting formal proposals, and attendance does not imply future contracting obligations, but seeks actionable concepts and engineering solutions from qualified vendors. Registration requires a two-step process by August 28, 2026: first, an email submission to the Navy point of contact with organizational details and participant names—capped at three per company—and a request for a breakout session if desired; second, a formal Visit Authorization Request submitted through DISS using the SPA SMO code 7L563. All attendees must present valid government-issued photo ID upon arrival and comply with strict facility security protocols, including a complete ban on electronic devices, wearable technology, and recording equipment within the venue. Limited secure storage is available, but attendees are advised to leave prohibited items in their vehicles. Medical devices with Bluetooth functionality require prior approval. The event will include government and shipbuilder briefings on Day 1 and one-on-one technical discussions with government and contractor personnel on Day 2, focusing exclusively on specific, viable technical innovations to enable next-generation submarine payload capabilities.

POSTED

about 18 hours ago

DEADLINE

Project Engineering, Manufacturing, and Science Services (PEMSS)

Solicitation # 80ARC027R0001-ID

NASA Ames Research Center

POSTED

about 18 hours ago

DEADLINE

C1DA--A/E Services Renovate Outpatient Clinics to PACT

Solicitation # 36C26126R0065

261-NETWORK Contract Office 21 (36C261)

POSTED

about 18 hours ago

DEADLINE

More opportunities from Department Of Defense → Naval Air Warfare Center Air Division

Same awarding agency

Static Torque Transducer

Solicitation # N0042126Q1308

The U.S. Government, through the Naval Air Warfare Center Air Division, is soliciting a firm fixed-price quotation for a Static Torque Transducer under solicitation number N0042126Q1308, with a strict submission deadline of Thursday, August 6, 2026, at 11:30 AM EST. This is a brand name procurement exclusively for STURTEVANT RICHMONT, as authorized by FAR Part 13.106-1(b), meaning only quotes for this specific brand will be considered. Offerors must provide complete technical details within their submission, as evaluation will be based solely on the information provided, and the award will go to the lowest aggregate firm fixed-price quote. In the event of equal bids, a random drawing witnessed by at least three individuals will determine the winner, with full documentation retained in the contract file. Submissions must include FOB terms, shipping costs, CAGE code, small business status, estimated delivery date, and a copy of the pricelist if available. The procurement is tax exempt and intended for performance at Patuxent River, Maryland. All responses must be sent via email to JaNae Lester at janae.a.lester.civ@us.navy.mil. The NAICS code for this procurement is 334515, and no set-aside designation is specified. No alternative brands or substitute products will be accepted; adherence to the named product and all required submission elements is mandatory for consideration.

Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

about 18 hours ago

DEADLINE

SOLE SOURCE NOTIFICATION: LMB North America, Inc. Brand Name Voltigeur Fans

Solicitation # N0042126Q1307

Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

about 18 hours ago

DEADLINE

Specialized Packaging and Labeling for Sensitive EquipmentThe contract requires specialized packaging, labeling, and logistics preparation for sensitive nozzle components to comply with Department of Defense shipping standards, including full adherence to WAWF and DoDAAC requirements. The work involves ensuring all components are secured, labeled, and documented according to military specifications to support secure and traceable transportation within the defense supply chain. The place of performance is identified with a zip code of 20670, indicating the work must be executed in proximity to the Naval Air Warfare Center Air Division’s operational area. This subcontract opportunity, posted on July 30, 2026, has a response deadline of August 5, 2026, and is classified under NAICS code 493190, which pertains to other support activities for transportation. The contracting authority is the Department of Defense through the Naval Air Warfare Center Air Division, signaling the need for a vendor capable of handling sensitive military hardware with precision and regulatory compliance. The absence of a solicitation number and point of contact suggests the solicitation may be internal or part of a broader program, requiring potential bidders to rely on the SAM.gov link for further details and submission guidelines.

Other Warehousing and Storage

POSTED

DEADLINE

Corrosion-Resistant Coating or Surface TreatmentThe contract seeks subcontractors to apply passivation, electropolishing, or physical vapor deposition coatings to nozzle components intended for use in high-moisture environments, with the goal of significantly improving their resistance to corrosion and enhancing long-term durability. The work is critical to maintaining performance and operational reliability in demanding aerospace and naval systems, where exposure to moisture can drastically reduce component lifespan. All proposed treatments must meet stringent technical standards to ensure consistent quality and compatibility with existing hardware. The solicitation is open for responses until August 5, 2026, and is classified as a subcontract under NAICS code 332813, indicating a focus on metal coating, heat treating, and related services. The place of performance is designated as 20670, associated with the Naval Air Warfare Center Air Division under the Department of Defense. While no set-aside provisions or specific point of contact are detailed, applicants must ensure alignment with defense-grade specifications and readiness to deliver within the specified timeframe to support mission-critical capabilities.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

DEADLINE

Precision Nozzle Component ManufacturingThe contract calls for the manufacture of high-precision metal nozzle components designed for use in ultrasonic spray systems, demanding stringent dimensional tolerances and the use of corrosion-resistant materials to ensure durability and performance in demanding environments. The work must meet exacting engineering specifications to support critical applications, likely related to defense or aerospace systems, given the involvement of the Naval Air Warfare Center Air Division. All components must be fabricated to exact standards without deviation, and the supplier is expected to have proven expertise in precision metalworking and material selection suitable for harsh operational conditions. The opportunity is structured as a subcontract under the NAICS code 332999 for other fabricated metal product manufacturing, with a response deadline of August 5, 2026, and was posted on July 30, 2026. Performance is to be carried out at a location with the ZIP code 20670, associated with the Department of Defense’s Naval Air Warfare Center. There is no set-aside designation specified, meaning the contract is open to all eligible contractors regardless of business size or category. Potential bidders must prepare technical and commercial proposals addressing capability, quality control, material certification, and production timelines to meet the technical demands of the requirement.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Ultrasonic Spray System

Solicitation # N0042126Q1305

The U.S. Government, through the Naval Air Warfare Center Air Division, is issuing a sole source solicitation for an ultrasonic spray system under contract number N0042126Q1305, leveraging authority under FAR Part 13.106-1(b) to procure directly from Spraying Systems Co. on a firm fixed-price basis, requiring all offerors to submit their best and final quotes by August 5, 2026, at 4:00 PM EST via email to JaNae Lester. The procurement is tax exempt and does not allow for price negotiation after submission, meaning initial offers must fully reflect both technical acceptability and competitive pricing. All responses must include FOB terms, shipping costs, CAGE code, small business status, estimated delivery date, and a copy of any applicable pricelist to be considered. The Government has designated the place of performance as Patuxent River, Maryland, and all materials must be directed to JaNae Lester at the Naval Air Warfare Center in Building 441. While the solicitation is structured as a sole source opportunity, interested parties are still required to submit their capabilities and pricing by the deadline to allow the Government to evaluate whether other sources could meet the requirement. The NAICS code 333912 identifies the procurement under industrial machinery manufacturing, and no set-aside designation is applied, meaning all eligible vendors may respond but the Government currently intends to award without competition unless superior alternatives are presented before the deadline.

Air and Gas Compressor Manufacturing

POSTED

DEADLINE

Logistics & Sustainment SupportThe contract is for logistics and sustainment support focused on anti-submarine warfare systems, requiring the development of comprehensive logistics plans, spare parts provisioning strategies, maintenance procedures, and training materials to ensure operational readiness of deployed systems. This work is critical to sustaining the long-term effectiveness of ASW capabilities through structured support infrastructure that covers supply chain management, maintenance workflows, and personnel training. The effort is scoped as a subcontract under the Department of Defense, specifically managed by the Naval Air Warfare Center Air Division, and falls under the NAICS code 488410, which pertains to other support activities for air transportation, indicating a focus on technical and logistical backend support rather than direct operations. Performance of the work is expected to occur at an unspecified location, with no specific city or state designated in the contract data, but the overarching responsibility lies with a federal defense entity overseeing maritime aviation systems.

Motor Vehicle Towing

POSTED

DEADLINE

Technical Writing & CDRL ManagementThe contract pertains to the production and management of technical documentation required under Contract Data Requirements Lists, encompassing the development of reports, user manuals, and other data deliverables essential for compliance and operational readiness. This subcontract is aligned with the NAICS code 541921, indicating specialized technical writing and documentation services, and is issued under the Naval Air Warfare Center Air Division, part of the Department of Defense, with performance expected in an unspecified location. The requirement focuses on ensuring all technical materials are accurately produced, properly formatted, and submitted in accordance with federal documentation standards and contractual obligations. The solicitation was posted on July 28, 2026, and while no set-aside designation or point of contact is specified, the emphasis is on delivering high-quality, compliant technical content that supports defense system operations. The scope demands a thorough understanding of CDRL requirements, meticulous attention to detail in documentation lifecycle management, and the ability to interface with technical teams to extract and translate complex system information into clear, usable documentation for end users and regulatory bodies.

Photography Studios, Portrait

POSTED

DEADLINE

Test & Evaluation (T&E) Support for ASW SystemsThe contract supports the planning and execution of ground and flight tests for anti-submarine warfare sensor and mission systems, encompassing comprehensive data collection, analysis, and reporting to validate system performance under operational conditions. It involves end-to-end test and evaluation activities aligned with naval aviation requirements, ensuring that sensor capabilities meet mission-critical standards for submarine detection and tracking. The work is being performed under a subcontract arrangement, with the Naval Air Warfare Center Air Division serving as the overseeing agency within the Department of Defense, and the testing is anticipated to occur at undisclosed locations with no specific city or state identified as the place of performance. The North American Industry Classification System code 541320 indicates the scope pertains to scientific and technical consulting services, emphasizing high-level engineering analysis and systems evaluation rather than manufacturing or procurement.

Landscape Architectural Services

POSTED

DEADLINE

Cybersecurity for Naval Avionics SystemsThe contract pertains to the implementation and validation of cybersecurity controls specifically tailored for mission-critical avionics and data systems used by the U.S. Navy, ensuring full compliance with Department of Defense standards. The work will focus on securing the integrity, confidentiality, and availability of avionics infrastructure essential to naval operations, with an emphasis on rigorous testing, vulnerability assessments, and adherence to federal cybersecurity frameworks applicable to defense systems. As a subcontract, this effort supports broader Defense Department objectives and is aligned with the NAICS code for computer systems design services. The performance location is designated broadly under the Naval Air Warfare Center Air Division, indicating that the work may occur across multiple secure defense facilities or contractor sites under strict oversight. The contract was posted in July 2026 and is part of the Department of Defense's ongoing initiative to harden airborne electronic systems against evolving cyber threats. No set-aside provisions are specified, and while no point of contact details are provided, the scope demands advanced technical expertise in cybersecurity engineering, embedded systems protection, and DoD compliance frameworks such as NIST SP 800-53 and RMF. All deliverables must be validated to ensure operational readiness and protection of sensitive national security data.

Computer Systems Design Services

POSTED

DEADLINE

Embedded Software Development for AvionicsThe contract involves the development and testing of real-time, safety-critical embedded software for avionics systems used in airborne mission platforms, focusing on sensor data processing and mission-critical functions that operate under demanding environmental conditions. The work is required to meet rigorous standards for reliability and performance, with software designed to function in high-integrity aerospace environments where failure is not an option. The subcontract supports advanced avionics capabilities essential for naval air operations, including sensor fusion, flight control, and real-time decision support systems that operate within strict timing constraints. The effort is classified under NAICS code 541512 for custom computer programming services and is sponsored by the Naval Air Warfare Center Air Division under the Department of Defense. Performance is expected to occur at an unspecified location, with no set-aside provisions or procurement preferences indicated. The contract was posted on July 28, 2026, and is structured as a subcontract, suggesting it is part of a broader program managed by a prime contractor. All software deliverables must be thoroughly validated and verified to ensure operational safety and mission success under dynamic airborne conditions.

Computer Systems Design Services

POSTED

DEADLINE

Sensor Systems Engineering & DevelopmentThe contract involves the research, design, and development of advanced sensor systems including sonar, radar, electro-optical/infrared, and electronic warfare technologies specifically tailored for the detection and tracking of submarines. This effort is being conducted as a subcontract under the Naval Air Warfare Center Air Division, part of the Department of Defense, and falls under the NAICS code 541715 for research and development in the physical, engineering, and life sciences. The work is focused on enhancing naval capabilities through cutting-edge sensor innovation, targeting undersea threats with integrated multi-spectral and electronic sensing solutions. The contract was posted on July 28, 2026, with no specified set-aside provisions or geographic limitations beyond the general performance location noted as 0, indicating potential flexibility in execution sites.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

DEADLINE