This Subcontract opportunity from Texas was posted on February 4, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Technical Compliance and Quality Assurance Support

Closed

State & Local

Submission Closed02/11/2026, 02:00:00 PM CST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541380

New

RFQ#9783 Respirable Crystalline Silica Exposure Assessment

Solicitation # RFQ#9783

Management & Training Corporation (MTC) is soliciting bids under RFQ#9783 for a subcontracting opportunity to conduct a Respirable Crystalline Silica Exposure Assessment at the Edison Job Corps Center in Edison, New Jersey. The project requires a qualified industrial hygiene consultant to evaluate the Brick Trade training program, specifically focusing on 27 potentially exposed students and instructors involved in activities such as fire clay mixing and brick cutting. The scope of work includes performing site assessments, implementing a personal breathing-zone air sampling plan, and comparing results against OSHA permissible exposure limits and action levels. Deliverables consist of a written report, laboratory results, exposure calculations, and a prioritized corrective action plan for reducing exposures. This is a fee-for-service contract awarded on a best-value basis. Interested offerors must submit a lump sum bid, a completed supplier packet including Form W-9 and self-certification, proof of insurance, and three professional references by November 6, 2026. The solicitation is open to various small business set-asides, including VOSB, SDVOSB, WOSB, and HUBZone. Awardees must comply with Service Contract Labor Standards for Middlesex County, New Jersey, and adhere to strict federal guidelines regarding the protection of sensitive information and the Buy American Act. First-tier subcontractors with contracts exceeding 45,000 dollars must also provide disclosures regarding government debarment or suspension.

POSTED

DEADLINE

Emergency Final Cost Air Qual Test Z0320 Rochelle

Solicitation # B-54783

Solicitation B-54783 is an emergency procurement issued by the State of Illinois under the Property Management agency, specifically the BOPM41640 office. The contract is titled Emergency Final Cost Air Qual Test Z0320 Rochelle, indicating a requirement for air quality testing services located in Rochelle, Illinois. The solicitation was posted on November 5, 2026, with a response deadline set for November 24, 2026. The procurement process is managed by Scott Eldridge and Gina Jacaway, who serve as the Purchaser and State Purchasing Officer, respectively. While the solicitation is active, specific details regarding the statement of work, pricing, evaluation factors, and contract clauses are not currently detailed in the provided documentation. Interested parties can access further information through the Illinois BidBuy portal.

BOPM41640 - Property Management

POSTED

DEADLINE

Geotechnical Laboratory TestingThis subcontract for Geotechnical Laboratory Testing involves providing specialized analysis of soil and rock samples for prime contractors working on University of Connecticut facility projects. The scope of work focuses on evaluating physical and mechanical properties, specifically shear strength, plasticity, and consolidation, ensuring all procedures adhere to ASTM International standards. The selected provider will be responsible for delivering comprehensive laboratory test results and detailed data sheets. Managed by DAS Procurement for the state of Connecticut, this opportunity falls under NAICS code 541380. The solicitation was posted on November 5, 2026, with a response deadline set for December 8, 2026. Interested parties can find further information through the CTSource Bid Board.

POSTED

DEADLINE

Environmental Laboratory ServicesThis subcontract for Environmental Laboratory Services supports prime contractors on Bridgeport Board of Education projects managed by BOE Maintenance in Connecticut. The selected provider must be an accredited environmental laboratory capable of performing chemical and particulate analysis on lead, asbestos, and PCB samples. Using specialized laboratory equipment, the contractor will analyze samples provided by field teams and deliver detailed analysis reports and test results. The opportunity is categorized under NAICS code 541380. Interested parties must submit their responses by the deadline of December 1, 2026. Further details regarding the solicitation can be accessed through the Bridgeport procurement portal.

POSTED

DEADLINE

Construction Inspection and Quality AssuranceThis subcontract for Construction Inspection and Quality Assurance involves providing site inspection and material testing services for prime contractors working on South Dakota Department of Game, Fish and Parks projects. The primary focus is conducting quality assurance for soil, steel, and concrete during the construction of a fish barrier. To ensure technical accuracy and safety, the contract requires that all work be performed by certified construction inspectors under the oversight of a Professional Engineer. The selected provider is responsible for delivering detailed inspection reports and formal certifications confirming that the construction complies with all design plans. This opportunity is issued by the South Dakota State Government under NAICS code 541380. Interested parties must submit their responses by the deadline of December 17, 2026.

South Dakota State Government

POSTED

DEADLINE

Materials and Compaction TestingThis subcontract opportunity involves providing independent materials and compaction testing services for prime contractors working on municipal roadway projects in Utah. The selected consultant will be responsible for performing field testing of asphalt and base course compaction, as well as material quality verification, utilizing nuclear density gauges. All findings must be documented and delivered through formal compaction and material test reports. To be eligible, the contractor must be a qualified independent testing consultant approved by the project owner. This procurement falls under NAICS code 541380. Interested parties must submit their responses by the deadline of November 19, 2026.

POSTED

DEADLINE

Geotechnical and Subsurface Investigation ServicesThis subcontract for Geotechnical and Subsurface Investigation Services supports the Telfair Wheeler Airport Authority in Georgia. The scope of work involves performing subsurface explorations and detailed soil analysis to assist prime contractors with critical infrastructure projects, specifically focusing on runway rehabilitation and the construction of new hangars. The selected provider will be responsible for conducting soil borings and delivering comprehensive geotechnical engineering reports. These deliverables must include professional soil stability recommendations to ensure the structural integrity of the airport improvements. The solicitation was posted on November 5, 2026, with a response deadline of December 7, 2026, falling under NAICS code 541380.

Telfair Wheeler Airport Authority

POSTED

DEADLINE

Accredited Environmental Testing LaboratoryThis subcontract opportunity, managed by DAS Procurement for the State of Connecticut, seeks an accredited environmental testing laboratory to provide analytical services for prime contractors working on Colchester Housing Authority residential projects. The selected provider will be responsible for performing laboratory analysis on samples for mold, lead, radon, asbestos, and PCBs, ensuring all results are delivered as certified reports. To qualify, the laboratory must maintain specific accreditations required by federal guidelines and the State of Connecticut for chemical and biological analysis. Interested parties should note the response deadline of November 19, 2026, and refer to NAICS code 541380 for the scope of work.

POSTED

DEADLINE

Third-Party Source Inspection and Quality CertificationThis subcontract for Third-Party Source Inspection and Quality Certification supports prime contractors on DLA Weapons Support ASC projects. The selected provider will perform source inspections and quality verification at manufacturer facilities, utilizing precision measurement tools to ensure strict compliance with MS35764H and MIL-DTL-45912C standards. Additionally, the contractor is responsible for validating SAE AS9003/ISO 9001 systems and ensuring packaging meets MIL-STD-2073-1E, MIL-STD-129, and MIL-STD-130N requirements, culminating in the delivery of signed inspection reports and quality certifications. Managed by the Department of Defense under NAICS code 541380, the performance of this contract is centered in Tracy, California. The solicitation was posted on November 5, 2026, with a response deadline of November 13, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

First Article Testing (FAT) and Quality ValidationThis subcontract for the DLA Weapons Support Active Devices Division involves performing First Article Testing and quality validation for prime contractors. The scope of work requires validating manufactured units against TDP Rev A Gen 1 and verifying zero-based sampling results in accordance with MIL-STD-1916 or ASQ H1331. To ensure full compliance with QAP 16236, the provider must utilize precision metrology and electrical testing equipment, ultimately delivering a certified First Article Test Report. The project is categorized under NAICS code 541380 and will be performed in New Cumberland. Interested parties should note the response deadline of November 16, 2026, for this Department of Defense requirement.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

DEADLINE

First Article Test (FAT) and Quality Validation ServicesThis subcontract for First Article Test and Quality Validation Services supports prime contractors on DLA Weapons Support ASC aerospace projects. The selected provider will perform First Article Testing to validate initial production units by verifying critical, major, and minor attributes in accordance with MIL-STD-1916 or ASQ H1331. All work must be conducted using calibrated Measurement and Test Equipment per RT001, and the contractor is required to maintain CMMC Level 2 certification to ensure secure access to technical data. The project is managed by the Department of Defense under NAICS code 541380, with performance taking place at Hill AFB. The primary deliverables include a completed First Article Test Report and a formal certification of compliance. Interested parties must respond by November 13, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

First Article Testing and Validation ServicesThis subcontract for First Article Testing and Validation Services supports the Department of Defense through the DLA Weapons Support LSO Combat Vehicles and Armament. The project involves performing and documenting First Article Testing for prime contractors on aircraft component projects, specifically focusing on the validation of duct assemblies. The selected provider will use precision testing equipment to verify that the first production unit meets all technical drawings and government specifications, ensuring overall manufacturing process capability. The contract is designated as a Total Small Business Set-Aside under NAICS code 541380, with performance taking place in New Cumberland. The primary deliverables include a certified First Article Test report and the validated first production unit. Interested parties must respond by November 16, 2026.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 23 hours ago

DEADLINE

in 10 days

AI Contract Overview

The Technical Compliance and Quality Assurance Support subcontract, issued by Dallas Area Rapid Transit in Texas, focuses on ensuring that all supplied components adhere to strict technical specifications. The primary objective of the agreement is to verify fitness for use through rigorous testing, detailed documentation, and strict warranty compliance. Interested parties must submit their responses by February 11, 2026, following the posting date of February 4, 2026. This opportunity falls under NAICS code 541380 and is managed through the Dallas Area Rapid Transit procurement portal.