Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

Technical Data Package (TDP) Development and Compliance Services

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the development and validation of Technical Data Packages (TDPs) to ensure that Non-Destructive Testing (NDT) systems comply with government inspection standards and meet all contractual requirements. This work is a subcontract opportunity under the Department of Defense, specifically associated with the W6QK Acc Wva agency office. The primary place of performance is in Watervliet, with the relevant NAICS code classified as 541330, which pertains to engineering services. The solicitation was posted on April 16, 2026, with a response deadline set for September 30, 2027, at 8:00 PM. While there is no specified set-aside type or organization type, the scope emphasizes stringent compliance to government standards, indicating the importance of precision and accuracy in delivering technical documentation for NDT systems. Interested parties can obtain additional details and review the full contract opportunity via the provided official link.

General Info

Development and validation of NDT Technical Data Packages for DoD compliance in Watervliet.

Agency

Department Of Defense → W6QK Acc WvaView Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

Watervliet, NY, 12189, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W6QK Acc Wva
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Defense → W6QK Acc Wva
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Develop and validate Technical Data Packages to ensure NDT systems meet government inspection standards and contractual requirements.

Similar Contracts

Same NAICS industry code

NAICS: 541330
New
SLED
Construction Management Services IDIQThe Port of Seattle is seeking qualified firms to provide Construction Management services under an Indefinite-Delivery, Indefinite-Quantity contract for major construction projects across various phases including planning, design, construction, and closeout. The scope encompasses support for multiple delivery methods such as Design Build, Progressive Design Build, and other alternative delivery models, ensuring projects are executed within authorized schedules, budgets, and quality standards. The contract is forecasted to be solicited with a NAICS code of 541330, indicating professional services in architectural and engineering activities. Point of contact for inquiries is Hala Rabbo, with additional support available from Project Manager Ann Davidson. All performance will occur at Port of Seattle locations, and firms interested in participating should monitor the official portal for upcoming solicitation details.
Construction Management

POSTED

about 6 hours ago

DEADLINE

N/A
View Details
NAICS: 541330
New
SLED
Retro-Commissioning, TAB, Controls, and Regulatory Support IDIQThe consultant will deliver retro-commissioning, test/adjust/balance, controls, and regulatory support services across Seattle-Tacoma International Airport’s facilities and infrastructure systems, operating within a demanding 24/7/365 environment. The primary focus is on identifying and resolving performance deficiencies in mechanical, HVAC, plumbing, lighting, Direct Digital Controls, smoke control, and fire protection systems to enhance efficiency, reliability, comfort, and lifespan, while ensuring full compliance with safety and regulatory mandates. Work will be executed through Service Directives and requires close collaboration with Aviation Facilities and Infrastructure to meet agreed-upon deliverables. The contract is structured as an IDIQ vehicle under NAICS code 541330, managed by the Port of Seattle’s Aviation Facilities & Infrastructure division. Point of contact for the opportunity is Jason Gates, with Jim Farris serving as Project Manager, and all communications and performance are centered at the airport. The forecast was posted on July 22, 2026, and the work will occur entirely at the airport location, with no geographic or organizational set-asides specified. The contract mechanism enables flexible, task-based engagement under a single sourcing framework to support ongoing operational improvements.
Aviation Facilities & Infrastructure

POSTED

about 6 hours ago

DEADLINE

N/A
View Details
NAICS: 541330
New
SLED
TxDOT Aviation Division- Notice to ConsultantsThe Texas Department of Transportation is soliciting proposals through RFQ26ALLTFLD00013 for services related to the Littlefield Taylor Brown Municipal project, with the notice posted on July 21, 2026, and a response deadline of August 12, 2026. This solicitation is directed toward consultants and is issued under the state and local government (SLED) category, with all performance expected to occur within Texas. Debra Woodruff of the TxDOT Aviation Division serves as the primary point of contact, reachable via email at debra.woodruff@txdot.gov or phone at 512-423-9722. Interested parties must submit responses through the Texas SmartBuy portal before the stated deadline to be considered. The solicitation does not specify a set-aside type or NAICS code, indicating open competition for qualified firms seeking to provide aviation-related consulting services for this municipal infrastructure initiative.
Texas Department of Transportation

POSTED

about 16 hours ago

DEADLINE

in 21 days
View Details
NAICS: 541330
New
SLED
Site Planning and Feasibility StudiesThe City of Issaquah is seeking qualified firms to conduct comprehensive site planning and feasibility studies for potential park facilities, requiring detailed site assessments, topographic analysis, access evaluations, and identification of environmental constraints. Contractors will be responsible for preliminary engineering tasks including conceptual layouts and feasibility analyses to determine viable options for park development, ensuring alignment with local regulations and natural resource protections. The work involves collecting and interpreting site data to support informed planning decisions and deliverables that form the foundation for future park construction. This subcontract opportunity is open for responses until August 14, 2026, with a North American Industry Classification System code of 541330, indicating professional architectural and engineering services. The contract is not designated for any specific set-aside program and is available to eligible firms capable of delivering technical expertise in land analysis and infrastructure planning. All work will be performed in support of public park projects within the City of Issaquah, Washington, and interested parties must submit proposals through the public procurement portal by the stated deadline.
City of Issaquah

POSTED

about 19 hours ago

DEADLINE

in 23 days
View Details
NAICS: 541330
New
SLED
RFQ PARKS- On-Call Civil Engineering Consultants for Parks & Recreation ProjectsThe City of Issaquah Parks and Community Services Department is seeking to establish an on-call arrangement with up to two civil engineering consulting firms to provide flexible, project-specific engineering services for parks and recreation initiatives. These services may support capital projects or address ad hoc technical needs, with work authorized through individual task orders that outline scope, timing, and compensation. There is no guarantee of work volume or hours, as task orders are issued solely at the City’s discretion based on evolving needs. The contract structure is designed to ensure access to a range of civil engineering specialties while maintaining agility for short-term or urgent requirements. Firms interested in participating must respond to the solicitation, designated as Parks 07.21.2026 Civil Engineering, with submissions due by August 14, 2026. The opportunity is open to qualified consultants through a competitive process overseen by the City of Issaquah in Washington State, with Robin Spear serving as the primary point of contact. All work will be performed within the State of Washington, and the Professional Services Agreement, including the task order format in Attachment C, governs the terms of engagement. Participation does not constitute a commitment or ongoing obligation from the City, and firms should understand that work is awarded solely on a case-by-case basis.
City of Issaquah

POSTED

about 19 hours ago

DEADLINE

in 23 days
View Details
NAICS: 541330
New
SLED
RFP 161001 Staunton TOC Building VeronaThe contract involves the demolition of a two-story house and shed in the Staunton district to make way for a new Traffic Operations Center Building in Verona, Virginia, which will support VDOT’s operational needs, communications systems, and critical traffic management functions. The selected architecture and engineering firm will be responsible for delivering full design services including comprehensive site and building plans, coordinating with the Department of Environmental Quality for all necessary permitting and regulatory approvals, and providing continuous construction administration and inspection support until project completion. The project is positioned to enhance infrastructure capabilities for traffic operations in the region and requires strict adherence to VDOT standards and timelines. The solicitation, identified as RFP-122707 under the title RFP 161001 Staunton TOC Building Verona, was posted on July 21, 2026, with proposals due by August 20, 2026. It is issued by the Virginia Department of Transportation under the SLED category and requires performance in Verona, Virginia. Joshua Saunders of VDOT serves as the point of contact for inquiries, reachable via phone or email. While no set-aside type or NAICS code is specified, the project demands a qualified A&E firm capable of managing complex regulatory processes and delivering mission-critical infrastructure under tight deadlines. All details and submissions must be directed through the official vendor portal linked in the solicitation.
Virginia Department of Transportation

POSTED

about 19 hours ago

DEADLINE

in 29 days
View Details
NAICS: 541330
New
DIBBS
Quality Assurance & First Article Testing (FAT) ServicesThe contract seeks independent verification and documentation of First Article Testing compliance to ensure that production processes and initial samples meet specified technical and quality requirements. This includes comprehensive inspection planning, execution of sample testing according to approved procedures, and the generation of a formal First Article Test report that validates conformance to contract specifications. The work is critical for validating manufacturing readiness and ensuring consistency before full-scale production begins, with all activities requiring strict adherence to established quality assurance protocols. This is a subcontract under the NAICS code 541330, relating to engineering services, and is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The solicitation is open for responses until August 20, 2026, and performance will be carried out in alignment with defense-specific quality standards. While no specific location or set-aside details are provided, the nature of the work indicates a focus on supply chain assurance for defense-related components, requiring qualified vendors with demonstrated expertise in aerospace or defense manufacturing compliance and formal reporting processes.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 20 hours ago

DEADLINE

in 29 days
View Details
NAICS: 541330
New
SLED
Plumbing Engineering ServicesThe contract seeks qualified providers to deliver comprehensive plumbing engineering services for the design of sanitary, storm, and domestic water systems, encompassing fixture layout, piping configuration, and full compliance with applicable plumbing codes. The work is required to meet technical standards and regulatory requirements to ensure safe, efficient, and code-compliant infrastructure for municipal projects under the jurisdiction of the City of Columbus in Ohio. The solicitation is structured as a subcontract opportunity, with no set-aside classifications specified, and is targeted at firms with expertise in civil and mechanical plumbing design. Responses must be submitted by August 20, 2026, following the posting date of July 21, 2026, and the work will be performed within the geographic boundaries of the City of Columbus. The North American Industry Classification System code for this contract is 541330, indicating it falls under architectural and engineering services. All proposals should demonstrate technical proficiency in plumbing system design and proven experience in municipal infrastructure projects. The opportunity is publicly accessible through the BonfireHub platform, and no point of contact information is provided within the public posting.
City Of Columbus

POSTED

about 20 hours ago

DEADLINE

in 29 days
View Details
NAICS: 541330
New
SLED
Electrical Engineering ServicesThe contract for Electrical Engineering Services involves the design of power distribution, lighting, fire alarm, and emergency electrical systems, with requirements to coordinate closely with architectural and structural elements to ensure seamless integration across all building systems. The work is intended to support infrastructure development under a subcontract arrangement, where technical precision and interdisciplinary collaboration are essential to meet safety, efficiency, and code compliance standards. The solicitation was posted on July 21, 2026, with a response deadline of August 20, 2026, and is assigned the NAICS code 541330, indicating it falls under engineering services for electrical systems. The contracting entity is the City of Columbus, Ohio, though specific location details and point of contact information are not provided in the data. All work is expected to be performed in alignment with the city’s infrastructure goals, and interested parties must submit proposals prior to the stated deadline to be considered for award.
City Of Columbus

POSTED

about 20 hours ago

DEADLINE

in 29 days
View Details
NAICS: 541330
New
SLED
Mechanical (HVAC) Engineering ServicesThe contract under the title Mechanical HVAC Engineering Services involves the comprehensive design of heating, ventilation, and air conditioning systems for a project under the City of Columbus in Ohio. It requires detailed engineering work including the selection of appropriate equipment, layout and sizing of ductwork, and adherence to energy efficiency standards aligned with ASHRAE guidelines and applicable local building codes. The scope focuses on ensuring systems are technically sound, code-compliant, and optimized for performance and sustainability. The opportunity is classified as a subcontract with a NAICS code of 541330, indicating professional engineering services, and is open for responses until August 20, 2026. All work must be performed in accordance with the requirements specified by the City of Columbus, though specific location details within the city are not provided. The posting was made on July 21, 2026, and interested parties can access further information through the provided online portal.
City Of Columbus

POSTED

about 20 hours ago

DEADLINE

in 29 days
View Details
NAICS: 541330
New
SLED
Structural Engineering ServicesThe contract titled Structural Engineering Services seeks qualified firms to provide structural design for foundations, framing, and load-bearing systems that fully comply with applicable seismic and safety codes, ensuring the structural integrity of upcoming projects. The work must be seamlessly integrated with architectural and MEP disciplines to support coordinated project delivery, emphasizing collaboration and technical alignment across all engineering domains. Services are expected to meet high standards of precision and code adherence without deviation, with deliverables tailored to support construction readiness and regulatory approval processes. This subcontract opportunity, posted on July 21, 2026, by the City of Columbus in Ohio, has a response deadline of August 20, 2026, and is classified under NAICS code 541330 for architectural and engineering services. The place of performance and point of contact details are unspecified, but the procurement is accessible via BonfireHub, indicating a competitive bidding process open to eligible subcontractors. There is no set-aside designation, and the contract is open to all qualified responders without geographic or size-based restrictions beyond standard subcontracting qualifications.
City Of Columbus

POSTED

about 20 hours ago

DEADLINE

in 29 days
View Details
NAICS: 541330
New
DIBBS
Quality Inspection and Acceptance SupportThe contract requires the execution of pre-shipment inspections using either MIL-STD-1916 or ASQ H1331 zero-based sampling plans to guarantee zero non-conformances for critical product attributes, ensuring the highest level of quality before delivery. This inspection process is stringent and designed to detect any deviations in essential characteristics, with non-compliance resulting in rejection of the shipment. The work is positioned as a subcontract under the NAICS code 541330 and is managed by the Department of Defense through its Maritime Supply Chain division, with performance required at the designated location in New Cumberland, Pennsylvania, 17070-5002. All responses must be submitted by the deadline of July 24, 2026, and the solicitation was posted on July 21, 2026, indicating a narrow window for proposal submission. The emphasis on zero defects reflects the mission-critical nature of the supplied goods, likely supporting defense or operational systems where failure is not an option. The contract does not specify set-aside status or point of contact details, and all information is accessible via the DIBBS portal under the referenced solicitation number.
MARITIME SUPPLY CHAIN

POSTED

about 20 hours ago

DEADLINE

in 2 days
View Details

More opportunities from Department Of Defense → W6QK Acc Wva

Same awarding agency

NAICS: 221310
New
Federal
Water Treatment Service at the Watervliet Arsenal, Watervliet NY
Water Supply and Irrigation Systems

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 332111
New
Federal
Conventional Tube Forgings per Drawing # 13122585, Revision New, for 155mm M775 Cannon, for the Watervliet ArsenalThe U.S. Army Contracting Command - Warren at Watervliet Arsenal is conducting a market survey to identify qualified manufacturers capable of producing M776 Conventional Tube Forgings according to Drawing #13122585 Rev New, with an approximate length of 254.25 inches. This notice is strictly for information gathering and does not represent a solicitation, request for proposal, or commitment to award a contract. No funds have been authorized or appropriated for this effort, and participation is entirely voluntary with no financial reimbursement for any costs incurred. Submitted materials, including company brochures and tailored capability statements, must detail manufacturing capabilities, sub-tier vendor dependencies, and be marked as proprietary if applicable. All submissions will be reviewed exclusively by Army personnel and kept confidential, but will not be returned. Responses must be submitted via email within seven days of the notice’s publication date, with required information including the company’s full address, primary point of contact name, phone number, and email. The designated point of contact is Amanda Robinson of ACC-WRN at Watervliet Arsenal, New York. The NAICS code associated with this effort is 332111, and there is no set-aside classification. The government will use the information provided to assess industry capability and interest before determining future procurement actions. Submission of information does not guarantee consideration for a future contract opportunity, and all data shared becomes the property of the U.S. Government.
Iron and Steel Forging

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 332710
New
Federal
HOWITZER CONTROL LEVER PER DRAWINGThis solicitation is a total small business set-aside for the procurement of levers per drawing number 11583608 for the 155mm M284 cannon, with two separate contract line item numbers. CLIN 0001 requires first article approval for 219 units, while CLIN 0002 waives first article approval for another 219 units. Both line items require compliance with the Contract Data Requirements List (DD Form 1423) and associated general data drawings, along with mandatory inspection. To be eligible for award, respondents must be verified small businesses with an active System for Award Management (SAM) registration and hold a current, valid Joint Certification Program (JCP) certification. Only small businesses meeting these criteria may access the technical drawings. All communication must be conducted via email only, with no phone inquiries permitted. The solicitation is managed by the Department of Defense, specifically the Office of W6QK Acc Wva in Watervliet, New York, and is identified by solicitation number W911PT26QA110 under NAICS code 332710. The response deadline is August 3, 2026, at 8:00 PM Eastern Time, and all submissions must be directed to the primary point of contact, Giuseppe Tropiano, via email at giuseppe.tropiano.civ@army.mil.
Machine Shops

POSTED

2 days ago

DEADLINE

in 12 days
View Details
NAICS: 238220
Federal
Water Strainer Inspection and Cleaning at Watervliet Arsenal, NYThe contract solicitation W911PT26QA097 seeks a total small business set-aside for the inspection and cleaning of seven water meter strainers located at Watervliet Arsenal in New York, under Project Number 26PW018. The work involves servicing 8-inch Sensus OMNI Fireline Water Meter assemblies in Buildings 40, 110, 120, 125, 130, 135, and Back Flow 4 (Siberia), requiring full labor, supervision, materials, tools, equipment, and transportation to pump out valve vaults, inspect and replace damaged strainer mesh, and verify pressure integrity without exterior leaks. All work must adhere to OSHA and Watervliet Arsenal confined space entry standards using Form 385-17-E, and must comply with UFGS 33 61 13.19, UFGS 33 11 00, NFPA 70, and the Watervliet Arsenal Instructions for Contractors. Contractors must submit a comprehensive Work Plan, Safety Plan, and Project Schedule, along with signed Lockout/Tagout and Asbestos Notification Acknowledgement Records, and a final inspection report including before/after photos and meter numbers within seven days of completion. The contract is a firm fixed-price arrangement, with performance required between August 1 and September 30, 2026, and delivery completion within 30 calendar days from the lead time event. All equipment and materials must be free from asbestos, mercury, chromium/lead paint, Class I Freon, and PCBs, with proper labeling on original packaging, and all mobilized property must carry weather-resistant labels displaying the contractor’s name, point of contact details, and project number. All offerors must be registered in SAM.gov and currently certified as a small business under NAICS code 238220, with annual representations and certifications updated within the last 12 months. Compliance with numerous FAR and DFARS clauses is mandatory, including prohibitions on inverted domestic corporations, convict labor, foreign-made unmanned aircraft systems, and required internal confidentiality agreements. Contractors must use WAWF for electronic invoicing and payment requests, with specific DoDAAC codes assigned for processing, and must have a designated electronic business point of contact in SAM.gov. On-site personnel must sign a non-disclosure agreement regarding Watervliet Arsenal technology prior
Plumbing, Heating, and Air-Conditioning Contractors

POSTED

8 days ago

DEADLINE

in about 7 hours
View Details
NAICS: NA
Federal
Unable to Decompose Subcontract OpportunitiesAccess to the prime contract data was denied due to an authentication error, preventing any identification or structuring of subcontract opportunities. The solicitation, titled "Unable to Decompose Subcontract Opportunities," was posted on July 8, 2026, with a response deadline of July 22, 2026, and is categorized as a subcontract under the Department of Defense, specifically linked to the agency designation W6QK Acc Wva. The place of performance is in Watervliet, New York, with a ZIP code of 12189, though no specific city, state, or country details beyond that are provided. No NAICS code, set-aside type, organization type, or point of contact information is available due to the restricted access, and the associated SAM.gov link remains inaccessible without proper authentication credentials.

POSTED

14 days ago

DEADLINE

in about 7 hours
View Details
NAICS: 333517
Federal
Sodick Sinker Electrical Discharge Machine for the Watervliet ArsenalA single Sodick Sinker Electrical Discharge Machine is being procured for the Watervliet Arsenal under Solicitation Number W911PT26QA106, with delivery, installation, and training fully included as specified in Manufacturing Engineering Work Group Specification #06-26-3419, Revision dated April 20, 2026. The equipment is essential for precision manufacturing operations and must comply with all technical and procedural requirements outlined in the referenced specification. The solicitation was posted on July 8, 2026, with responses due by July 22, 2026, and is classified under NAICS code 333517 for industrial machinery manufacturing. The contract is managed by the Department of Defense through the W6QK Acc Wva office located in Watervliet, New York, with performance required at the Watervliet Arsenal facility with a zip code of 12189. Amanda Robinson of the U.S. Army is the primary point of contact for inquiries and can be reached via email or phone provided in the solicitation documents.
Machine Tool Manufacturing

POSTED

14 days ago

DEADLINE

in about 7 hours
View Details
NAICS: 541715
Federal
U.S. Army Contracting Command – Watervliet Arsenal (ACC-WVA) Organic Industrial Base (OIB) Modernization Commercial Solutions Opening (CSO)The U.S. Army Contracting Command – Watervliet Arsenal is conducting a continuously open Commercial Solutions Opening (CSO) under the authority of Section 1823 of the National Defense Authorization Act for Fiscal Year 2026, which amended Title 10, Section 3458, and is implemented through DFARS Subpart 212.70. This CSO, identified by solicitation number W911PT26SC001 and posted on sam.gov, remains active until September 30, 2027, with the possibility of extension, and is designed to rapidly identify and acquire innovative commercial products, technologies, and services to modernize the Organic Industrial Base at Watervliet Arsenal and Benet Laboratories. The initiative focuses on integrating legacy analogue manufacturing systems with modern digital capabilities, enhancing modeling and simulation for faster decision-making, and ensuring timely delivery of critical materiel to the soldier. Proposals are sought across four specific Areas of Interest: Advanced Cannon Technology to eliminate hexavalent chromium in production, Test Inspection Equipment for improved non-destructive testing, Electrical Infrastructure upgrades at Building 120 to support increased power demands, and Chromium Plating Facility Conversion to repurpose the site into a tooling storage and inspection area. The process follows a three-phase approach—Submission of a Written Solution Brief, Presentation/Pitch (if invited), and Request for a Commercial Solution Proposal—with all submissions governed by FAR Part 12, classifying resulting acquisitions as commercial items and requiring fixed-price contracts, including fixed-price incentive fee structures. Offerors must possess a valid Unique Entity ID and maintain an active SAM.gov profile, be determined responsible by the Contracting Officer, and not be suspended or debarred. All proposals must be unclassified, with no confidential markings, and must be submitted in two separate volumes: a technical volume containing the work plan, technical approach, staffing, and deliverables without cost data, and a price volume providing a rough order of magnitude price for evaluation. Evaluation criteria prioritize relevancy to the Area of Interest, technical merit, innovation, and risk assessment across technical maturity, schedule, business viability, and intellectual property, with awards contingent upon funding, negotiation success, and alignment with program priorities. Proposal preparation costs are not recoverable, awarded contracts must use Wide Area Work Flow for invoicing, and the period of performance for any proposed solution generally does not exceed 12 months unless otherwise noted in the specific Area of Interest.
Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

22 days ago

DEADLINE

in about 1 year
View Details
NAICS: 6112
Federal
MACHINIST APPRENTICESHIP TRAINING FOR WATERVLIET ARSENAL EMPLOYEESThe MACHINIST APPRENTICESHIP TRAINING FOR WATERVLIET ARSENAL EMPLOYEES is a sole-source solicitation issued by the Department of Defense through the Army Contracting Command ACC-WVA, targeting Hudson Valley Community College for the delivery of machinist apprenticeship training to employees at the Watervliet Arsenal in New York. The contract includes a base period with the possibility of three additional option years and was initiated following a sources sought notice in June 2024 that received no responses, though the agency remains open to capability statements or proposals from any responsible sources. Award will be contingent upon the offeror maintaining an active System for Award Management registration with current representations and certifications. All solicitation documents and amendments will be issued electronically via the SAM.gov website under solicitation number W911PT26QA096, with no hard copies provided. Prospective offerors must regularly monitor the SAM.gov portal for updates, as the government will not maintain a mailing list or provide individual notifications of amendments. Failure to review and respond to any amendments before the deadline of July 24, 2026, at 6:30 PM Eastern Time may result in rejection of the offer. The primary point of contact for inquiries is Maria DeCrescenzo, with secondary support from Joseph Pokrentowski, and the place of performance is confirmed as Watervliet, New York, 12189.
Junior Colleges

POSTED

about 1 month ago

DEADLINE

in 2 days
View Details
NAICS: 811212
Federal
UII/2D Data Matrix Labeling and Marking ServicesThis contract involves the application and verification of Unique Item Identification (UII) using 2D Data Matrix symbols on containers in full compliance with MIL-STD-130 and ISO/IEC 16022 standards. The work requires precise marking procedures to ensure each container is uniquely and durably identified with machine-readable data that meets Department of Defense requirements for traceability and inventory management. The service is being procured as a small business set-aside under the SBA program, exclusively available to total small businesses, and is classified under NAICS code 811212 which pertains to industrial and commercial machinery and equipment repair and maintenance. The contract is linked to the Department of Defense via the agency name W6QK Acc Wva and has a place of performance identified with a zip code of 12189. Although solicitation details and point of contact information are not provided, the posting date indicates this opportunity was made publicly available in May 2026, targeting vendors capable of delivering high-accuracy labeling services that adhere strictly to military and international marking standards. The scope focuses on ensuring containers used in defense logistics systems are properly labeled with verified 2D Data Matrix symbols to support lifecycle tracking, accountability, and operational readiness.
Computer and Office Machine Repair and Maintenance

POSTED

2 months ago

DEADLINE

N/A
View Details
NAICS: 423320
Federal
Military-Grade Crating Materials SupplyThe contract is for the supply of specialized materials including kiln-dried lumber, moisture-resistant plywood, foam liners, and steel strapping to support the fabrication of military-spec containers. These materials must meet stringent performance standards to ensure durability, environmental resistance, and structural integrity under demanding operational conditions. The solicitation is a total small business set-aside under SBA guidelines, restricting eligibility exclusively to small businesses as defined by the Small Business Administration, and is classified under NAICS code 423320 for lumber and other construction materials merchant wholesalers. Performance of the contract is designated to occur at a location with zip code 12189, and the contracting entity is the Department of Defense under the office designation W6QK Acc Wva. The nature of the agreement is a subcontract, indicating it supports a broader defense contracting effort, likely involving assembly, packaging, or logistics systems for military use. All materials must comply with military specifications without explicit detailing, and the procurement is aimed at ensuring supply chain resilience through small business participation. The listing was posted on May 11, 2026, and interested parties can access further details through the provided SAM.gov link.
Brick, Stone, and Related Construction Material Merchant Wholesalers

POSTED

2 months ago

DEADLINE

N/A
View Details
NAICS: 321920
Federal
Precision Wood Container Manufacturing for Military ArtilleryThe contract entails the manufacture of thirty wooden containers specifically designed to house M284 Howitzer 155mm cannon tubes, adhering strictly to military specifications that demand high durability, resistance to moisture, and standardized marking protocols to ensure operational readiness and logistical traceability. The containers must be constructed using materials and methods that withstand harsh environmental conditions and handling during transport and storage, with no compromise to structural integrity or protective capabilities. This is a small business set-aside subcontract under the SBA program, with the NAICS code 321920 indicating the focus on other wood product manufacturing. The awarding agency is the Department of Defense, operating through W6QK Acc Wva, and the work is to be performed at a location with the zip code 12189. The solicitation was posted on May 11, 2026, and is exclusively available to small businesses meeting the criteria of a total small business set-aside, ensuring opportunities for qualified smaller manufacturers to participate in critical defense supply chain roles.
Wood Container and Pallet Manufacturing

POSTED

2 months ago

DEADLINE

N/A
View Details
NAICS: 811212
Federal
Mobile NDT System Calibration and Field Support ServicesThe contract focuses on providing calibration, maintenance, and technical support services for portable Non-Destructive Testing (NDT) systems used at Watervliet Arsenal and other Department of Defense locations. It is a subcontract opportunity associated with the NAICS code 811212, which covers electronic and precision equipment repair and maintenance. The work will be primarily conducted at Watervliet, with the ZIP code 12189 indicated as the place of performance. Issued by the Department of Defense under the office identified as W6QK Acc Wva, the contract is open until September 30, 2027, allowing interested parties ample time to submit their responses. The services required are integral for maintaining operational readiness and ensuring the reliability of NDT systems deployed in various DoD settings, emphasizing ongoing support and technical expertise for sensitive defense equipment.
Computer and Office Machine Repair and Maintenance

POSTED

3 months ago

DEADLINE

in about 1 year
View Details