Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Tescan MAIA3 Scanning Electron Microscope (SEM) Maintenance

Active

Federal

Response Deadline09/04/2026, 12:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

National Aeronautics And Space Administration → NASA Shared Services CenterView Agency

NAICS

811210 - Electronic and Precision Equipment Repair and MaintenanceView NAICS

Place of Performance

Cleveland, OH, 44135, USA

Set-Aside

NONE

Documents

This scope was carved out of 80NSSC26943435Q.

The full solicitation package (3 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

2026 Service contract for Tescan MAIA3

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 2

subcontract

Response DeadlineSep 4

Submission deadline

Response Deadline

09/04/2026, 12:00:00 PM UTCin about 22 hours

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyNational Aeronautics And Space Administration → NASA Shared Services Center

ContactsNo contacts available

OfficeN/A

Organization / Agency

National Aeronautics And Space Administration → NASA Shared Services Center

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs specialized maintenance and preventive inspections for prime contractors on NASA Shared Services Center projects at the Glenn Research Center. Conducts one planned preventive maintenance inspection, technical adjustments, and calibrations to meet OEM specifications for the Tescan MAIA3 XMU VP FE-SEM (SN 116-0191). Requires factory-trained service engineers. Delivers a fully operational SEM and a completed inspection report.

Similar Contracts

Same NAICS industry code

MURR Replace Existing Uninterruptable Power SupplyThe University of Missouri - Columbia is seeking a contractor to replace an existing Ametek Uninterruptible Power Supply with a modern equivalent. The required replacement should be an Eaton model or a comparable alternative to ensure continued power stability. This project is currently listed as a forecast and was posted on September 2, 2026. Interested parties can coordinate through the primary point of contact, Megan Haslag, or refer to the university's facilities planning and development resources for further details.

University of Missouri - Columbia

POSTED

about 10 hours ago

DEADLINE

*SB/DVBE ONLY* IFPQ 07A6433 Gas Monitoring Equipment Calibration in Los Angeles County

Solicitation # 07A6433

The California Department of Transportation is seeking a certified small business registered with the Department of General Services to provide on-call calibration and repair services for portable gas monitors and analyzers. The selected contractor is responsible for providing all necessary labor, tools, equipment, materials, travel, and incidentals to perform these services within Los Angeles County. This solicitation, identified as IFPQ 07A6433, is specifically set aside for Small Business and Disabled Veteran Business Enterprises. Interested bidders must submit their responses by September 17, 2026. Primary inquiries regarding this opportunity should be directed to Catherine Andersen.

California Department of Transportation

POSTED

about 14 hours ago

DEADLINE

IBM Support Maintenance

Solicitation # SRC0000041413

The State of Ohio Department of Administrative Services is seeking 12 months of onsite 24x7 same day hardware maintenance support for IBM serial number 7815DM0, covering the period from May 14, 2026, to May 15, 2027. This solicitation is strictly limited to Minority Business Enterprise MBE dealers who hold specific state contracts, including RSC024735, RSC021317, RSC021135, 0A1375, and STS033. Eligible suppliers must provide quotes at or below existing contract pricing and include the applicable state contract number within the required response grid. Selection will be based on the lowest responsive and responsible MBE quote, and the state reserves the right to renew the contract for up to three additional one-year terms. All responses must adhere to the State Standard Terms and Conditions, and no additional documentation outside of the provided grid will be considered.

Das500000 Office Of Information Technlgy Socc03

POSTED

DEADLINE

58--RECORDER,SOUND, IN REPAIR/MODIFICATION OF

Solicitation # N0038326QSB44

This sole source procurement, issued by the Department of Defense via Navsup Weapon Systems Support, is for the repair or modification of three sound recorders under NSN 7R-5835-015221023-KB and TDP VER 002. The delivery terms are set as FOB Origin. Due to a lack of sufficient or legible data available to the government, this requirement is restricted to the current source. The acquisition is subject to the World Trade Organization Government Procurement Agreement and various Free Trade Agreements. Prospective contractors must obtain Government Source Approval prior to the award. Applicants who are not already approved sources must submit all required documentation as specified in the NAVSUP WSS Source Approval Brochure along with their proposals, as failure to do so will result in disqualification. The solicitation, identified as N0038326QSB44, has a response deadline of October 13, 2026, and inquiries should be directed to Cody P. Cameron.

Navsup Weapon Systems Support

POSTED

DEADLINE

in about 1 month

J--GC26 - MAINTENANCE OF THREE COPIERS

Solicitation # 140R4026Q0121

The U.S. Department of the Interior, Bureau of Reclamation, Glen Canyon Field Division, is seeking a firm-fixed-price contract for the maintenance, inspection, and repair of three government-owned Xerox VersaLink multifunction devices located at Glen Canyon Dam in Page, Arizona. This total small business set-aside under NAICS 811210 consists of a 12-month base period with four 12-month option years, for a total potential duration of five years and six months. The contractor is required to provide OEM parts and consumables and must maintain a 95 percent monthly uptime standard. Performance requirements include a 60-minute acknowledgment of service calls, a one-business-day on-site response for critical repairs, and a three-business-day response for routine repairs. If a repair is not completed within five business days, the contractor must provide comparable loaner equipment. Recent amendments have modified the contract requirements, changing the preventative maintenance frequency from quarterly to annual and updating the invoicing schedule from quarterly to monthly following completed service calls. The solicitation deadline was extended to September 8, 2026. Award will be based on a best-value tradeoff considering technical approach, past performance, and total aggregate price. Offerors must demonstrate authorization or certification to service Xerox VersaLink equipment and provide at least two past performance references from the last three years. Invoicing is processed electronically through the U.S. Department of the Treasury's Invoice Processing Platform, requiring a signed hard copy from the Contracting Officer's Representative.

Upper Colorado Regional Office

POSTED

DEADLINE

70--INTERFACE UNIT,DATA, IN REPAIR/MODIFICATION OF

Solicitation # N0038326QFC05

Navsup Weapon Systems Support is soliciting a sole source procurement for 39 units of the Interface Unit, Data, identified by NSN 7R-7025-016241529-KB and part number 698258-7. The delivery terms are set as FOB Origin. This acquisition is being pursued as a sole source because the government lacks the necessary technical data to contract with alternative providers. The procurement is subject to the World Trade Organization Government Procurement Agreement and various Free Trade Agreements. Prospective bidders must obtain Government Source Approval prior to the award. Those who are not already approved sources must submit all required documentation as specified in the NAVSUP WSS Source Approval Brochure along with their proposal to be considered for the award. The solicitation, numbered N0038326QFC05, has a response deadline of October 13, 2026. Inquiries regarding this notice should be directed to Casey Brown.

Navsup Weapon Systems Support

POSTED

DEADLINE

in about 1 month

59--SWITCH,RADIO FREQUE, IN REPAIR/MODIFICATION OF

Solicitation # N0038326QBB06

NAVSUP Weapon Systems Support Philadelphia intends to award a sole source contract to Rockwell Collins Inc for the repair of four radio frequency switches, part number 787-6616-001, used in ASN 30 TACAOMO III aircraft. Because Rockwell Collins Inc is the original equipment manufacturer and the government lacks the necessary data rights to utilize other vendors, this procurement is conducted under the authority of 10 U.S.C. 2304(c)(1) and FAR 6.103-1. The contract will have a duration of one year and must comply with UID requirements and Buy American clauses. The solicitation is expected to be issued on September 19, 2026, with a closing date of October 19, 2026, and an anticipated award date in January 2027. While the government intends to negotiate with a single source, other responsible sources may submit capability statements or proposals for consideration. The procurement will be managed electronically via NECO under NAICS code 334419 and PSC 5985, following the procedures prescribed in FAR Part 15.

Navsup Weapon Systems Support

POSTED

DEADLINE

in about 2 months

J--Maintenance Service Contract for SeqStudio Flex 24

Solicitation # 140G0226Q0132

The Department of the Interior, through the Office of Acquisition Grants in Denver, is soliciting a maintenance service contract for a SeqStudio Flex 24-capillary Genetic Analyzer. This opportunity is designated as a total small business set-aside under NAICS code 811210. Interested parties must submit their responses by August 24, 2026, in accordance with solicitation number 140G0226Q0132. The primary point of contact for this requirement is Kekila Keuma.

Ofc Of Acquisition Grants-Denver

POSTED

DEADLINE

Service Maintenance Agreement for GE PET/CT system

Solicitation # 36C25726Q0887

The Department of Veterans Affairs Network Contracting Office 17 is conducting market research via a Sources Sought Notice for a firm-fixed-price service maintenance agreement to support GE PET/CT systems at the Olin E. Teague VA Hospital in Temple, Texas. The intended contract structure consists of a base year followed by four one-year option periods. The scope of work requires comprehensive full-service maintenance, including unlimited corrective maintenance and scheduled preventive maintenance performed according to GE OEM specifications. Key deliverables include 24-hour technical telephone support, the provision of all GE software updates and security patches, and documentation support for ACR/TJC accreditation and annual radiation safety testing. The agreement covers a specific suite of equipment, including the PET DISCOVERY PET/CT710, NM OPTIMA NM/CT 640, FlashPad HD Detector, Definiun 656 HD, AW SERVER, DIMPLEX chiller, MEDRAD MR XPERION, and MR 1.5T SIGNA ARTIST. To ensure quality and safety, all assigned service personnel must be OEM-trained and provide proof of such training. Additionally, the government is requesting letters of authorization from the original equipment manufacturer for qualified sources. This current phase is for informational purposes only to determine the availability of various small business types and large businesses, with responses directed to Oneka Robertson by September 4, 2026.

257-NETWORK Contract Office 17 (36C257)

POSTED

DEADLINE

in about 24 hours

Research Biosafety Cabinet, Laboratory Equipment Certification & Service

Solicitation # 36C25026Q0900

The Department of Veterans Affairs, through the Network Contract Office 10, is soliciting bids for the certification and service of research biosafety cabinets and laboratory equipment at the Cincinnati VA Medical Center. This combined contract, identified by solicitation number 36C25026Q0900, is set aside for Service-Disabled Veteran-Owned Small Businesses under NAICS code 811210. The primary objective is to ensure a safe research environment and maintain regulatory compliance through the recurring certification, calibration, decontamination, and maintenance of critical scientific equipment, including pipettes, centrifuges, fume hoods, biosafety cabinets, and a Nikon AXR Confocal Microscope. Performance will take place in Cincinnati, Ohio, with a response deadline of September 11, 2026. A key requirement of this procurement is strict adherence to Department of Labor Wage Determination rates for the specific county where the medical center is located, as mandated by FAR clause 52.222-41. Qualified technicians must perform these services to support ongoing research activities dedicated to the service of Veterans.

250-NETWORK Contract Office 10 (36C250)

POSTED

DEADLINE

Notice of Intent to Sole Source - Viewpoint Wireless Monitoring

Solicitation # 36C24226Q0967

The Department of Veterans Affairs, specifically the Network Contract Office 02, has issued a notice of intent to sole source a contract for Viewpoint Wireless Monitoring to EOI, Inc., doing business as Medical Resources. This procurement, identified by solicitation number 36C24226Q0967 and NAICS code 811210, will be performed in Bath, New York. Interested parties must submit their responses to Julie Monagan Barnard via email by 3:00 p.m. EST on September 14, 2026. This special notice serves to inform the public of the agency's intent to award the contract to a single source provider.

242-NETWORK Contract Office 02 (36C242)

POSTED

DEADLINE

ABL 90 Annual Maintenance Coverage

Solicitation # N0018926QB131

Solicitation N0018926QB131 is a request for a firm fixed price service contract to provide annual extended maintenance and support for one Radiometer ABL90 Flex Plus analyzer, serial number 393-092R0657N007. The contract is issued by the Navsup Flt Logistics Ctr Norfolk for the Navy Medical Research Unit-San Antonio, located at Fort Sam Houston, Texas. This requirement is designated as a Service-Disabled Veteran-Owned Small Business set-aside. The scope of work includes annual preventative maintenance visits, 24/7 technical phone support, software and firmware upgrades, and the provision of all necessary parts and labor. On-site services must be performed during normal business hours, Monday through Friday, from 8:00 am to 5:00 pm. The period of performance consists of a base period starting September 1, 2026, and ending August 31, 2027, with four additional option periods. Award decisions will be based on the most advantageous offer, primarily considering price, though a tradeoff between price and past performance may be conducted if necessary. Payment will be processed electronically through the Wide Area WorkFlow system. The contractor must adhere to specific security and access requirements for federally controlled facilities and comply with Buy American and trafficking in persons regulations. Inspection and acceptance of services will occur at the destination in Texas, overseen by the Contracting Officer's Representative.

Navsup Flt Logistics Ctr Norfolk

POSTED

DEADLINE

More opportunities from National Aeronautics And Space Administration → NASA Shared Services Center

Same awarding agency

MOOG ENGINEERING MODEL UNIT CASCADE SDU WITH ENCLOSURE

Solicitation # 80NSSC26942587

The NASA Shared Services Center is seeking to procure specialized spacecraft payload-processing development and integration hardware for the NASA Armstrong Flight Research Center in Edwards, California. The requirement consists of one Moog Engineering Model Unit Cascade SDU with Enclosure, one Moog Cascade 2-Slot Chassis, and one Moog Cascade 100 Pin Front Panel Breakout. This procurement is categorized under NAICS code 336413 and will be conducted as a commercial acquisition following FAR Part 12 procedures. NASA intends to award a sole source contract to Moog Inc. under FAR 12.102(a), as Moog Inc. is identified as the only provider of the specific integrated spacecraft-processing architecture compatible with existing NASA systems. The period of performance is established as six months after receipt of award. While the government is currently requesting capability statements by September 4, 2026, to determine if the procurement can be conducted on a competitive basis, it is noted that quotes submitted in response to the notice will not be evaluated by the technical team.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

athenaFlow and EZ Access patient portal Renewal

Solicitation # 80NSSC26942330Q

The NASA Shared Services Center is seeking a capability statement for the renewal of the athenaFlow and EZ Access patient portals. This special notice, identified by solicitation number 80NSSC26942330Q, is focused on services categorized under NAICS code 518210. The place of performance for these services is located in Houston, Texas. Interested companies must submit a capability statement to be considered, as quotes will not be reviewed or accepted at this time. The deadline for responses is September 7, 2026, at 6:00 PM. Primary inquiries and submissions should be directed to Cara Craft.

Computing Infrastructure Providers, Data Processing, Web Hosting, and Related Services

POSTED

DEADLINE

Moog Engineering Model Unit Cascade SDU & Debug Cable

Solicitation # 80NSSC26942609Q

The NASA Shared Services Center, on behalf of the Armstrong Flight Research Center, is seeking the procurement of specialized spacecraft-processing architecture and supporting hardware for payload-processing development and integration. The required equipment includes one Moog Engineering Model Unit Cascade SDU with Enclosure, one Moog Cascade Carrier Debug Cable, and one Moog Cascade 100 Pin Front Panel Breakout. This requirement is for specific integrated hardware rather than generic commercial components. The period of performance is six months after receipt of award, with the place of performance located in Edwards, California. The government intends to award a sole source contract to Moog Inc under FAR 12.102(a), as they have been identified as the sole provider of this equipment. The acquisition will follow FAR Part 12 procedures for commercial products and services and includes the NASA FAR Supplement Clause 1852.215-84 regarding the Ombudsman. While the intent is a sole source award, interested firms may submit capability statements and qualifications to the primary point of contact, Cara Craft, by September 7, 2026, to be considered for a competitive procurement. Quotes will not be accepted or reviewed; only capability statements are requested.

Motor and Generator Manufacturing

POSTED

DEADLINE

VACCO Industries pneumatic tee-type filter

Solicitation # 80NSSC940863Q

Solicitation 80NSSC940863Q is a firm-fixed-price request for quotation issued by the NASA Shared Services Center for a brand-name VACCO Industries pneumatic tee-type filter, part number 24267-630-11 (79K80283-27). The component must be 316 SST with a 25 micron rating and meet specific cleaning standards per KSC-C-123 or ASTM G93, including a full disassembly and reassembly process with a 100A body and 50A element cleaning. These spare parts are required to support Artemis III systems and Exploration Ground Systems at the Kennedy Space Center Propellants and Life Support Services in Orlando, Florida. The contract will be awarded based on the lowest price technically acceptable (LPTA) criteria. To be considered for award, offerors must be registered in the System for Award Management and provide both proof of pricing from the manufacturer and official authorization from the original equipment manufacturer to resell the items. Deliveries are specified as FOB Destination and must include a certificate of conformance. Quotes are due by September 8, 2026, and must include estimated after receipt of order (ARO) timelines and manufacturer lead times.

Other Measuring and Controlling Device Manufacturing

POSTED

DEADLINE

IADS Annual Maintenance and Support Renewal

Solicitation # 80NSSC26941993Q

The NASA Shared Services Center is seeking the IADS Annual Maintenance and Support Renewal for the NASA Armstrong Flight Research Center. This requirement consists of a Year 13 site license renewal and an associated annual economic increase of 4 percent. The period of performance is scheduled from November 1, 2026, to October 31, 2027, with the place of performance located at the Armstrong Flight Research Center in Edwards, California. The procurement is classified under NAICS code 513210 and is governed by the terms of the Site License IADS-NAFRC_SLA01 and the Maintenance and Support Services Addendum. Under the authority of FAR 12.102(a), the government intends to award a sole source contract to Curtiss-Wright DS, Inc., as they have been determined to be the sole provider of these services. While the agency has issued a notice of intent to sole source, interested organizations were invited to submit capabilities and qualifications by September 7, 2026, to determine if competitive procurement should be considered. The primary point of contact for this effort is Cara Craft.

Software Publishers

POSTED

DEADLINE

Purchase of 4 Minus K vibration isolation platforms

Solicitation # 80NSSC26941944Q

The NASA Shared Services Center is seeking quotes for the purchase of four Minus K vibration isolation platforms under solicitation 80NSSC26941944Q. This procurement is designated as a total set-aside for small businesses and falls under NAICS code 334516. The place of performance is located in California, while the contracting office is based in Stennis Space Center, Mississippi. Interested vendors must submit their quotes in PDF format by the deadline of September 9, 2026, at 6:00 PM. The primary point of contact for this requirement is Cara Craft.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

HIGH PERFORMANCE ENGINEERING WORKSTATIONS

Solicitation # 80NSSC26942594

The NASA Shared Services Center is seeking to procure three new, factory-built high-performance engineering workstations for the Distributed Electric Propulsion R&D project at the NASA Glenn Research Center. These systems are required to support computationally intensive nTop topology optimization and ANSYS Fluent analysis of additively manufactured lattice heat exchangers. Each workstation must be based on the Puget Workstation Core Ultra Z890 C121-L configuration, featuring an Intel Core Ultra 7 270K processor, 256 GB of DDR5 memory, and an NVIDIA RTX PRO 6000 Blackwell GPU with 96 GB. The procurement is classified under NAICS code 334111 and will follow FAR Part 12 procedures for commercial items. NASA intends to issue a sole source contract to Puget Systems, as they are identified as the only provider of workstations compatible with existing systems at NASA centers. The contractor must provide lifetime labor and technical support, a minimum three-year parts warranty, and ensure all systems undergo manufacturer burn-in and stress testing prior to shipment. Delivery is required within 30 calendar days after receipt of order to NASA Glenn Research Center, Building 6, Room 200 ws1. This is a schedule-critical procurement, and acceptance is contingent upon the systems being new, free of physical damage, and passing a basic functional power-on check.

Electronic Computer Manufacturing

POSTED

DEADLINE

HSF Funded- DATR: LRO Tracking Controller Repair (Spare)

Solicitation # 80NSSC26941692Q

NASA/NSSC intends to award a sole source contract to L3Harris Interstate Electronics Corporation for the repair of a spare LRO Tracking Controller. This procurement is being conducted under FAR Part 12 for commercial items and services, utilizing NAICS code 541330. The work will be performed at the NASA Armstrong Flight Research Center in California, with the NASA Shared Services Center serving as the procuring entity. Interested organizations may submit their capabilities and qualifications to the primary point of contact, Tracy Bremer, by 4:00 p.m. CST on September 7, 2026. These submissions will be used solely to determine if the procurement should be shifted to a competitive basis. Please note that formal quotes submitted in response to this notice will not be evaluated by the technical end user team.

Engineering Services

POSTED

DEADLINE

SCAPE VENTILATOR CYLINDERS

Solicitation # 80NSSC26941703Q-R1

Solicitation 80NSSC26941703Q-R1 is a firm-fixed-price request for quotation issued by the NASA Shared Services Center for the procurement of 170 carbon composite ventilator cylinders for use with Self-Contained Atmospheric Protective Ensemble operations at the Kennedy Space Center. This requirement is a total small business set-aside under NAICS code 334516. The procurement is necessary to replace existing inventory reaching DOT-mandated retirement thresholds in 2027. The government is seeking cylinders with part number 10128099-SP, featuring a 30-minute duration, 4500 psi working pressure, and a volume of 45 cubic feet, manufactured in accordance with DOT-SP 10915. Technical requirements specify that cylinders must be delivered empty and manufactured within six months of delivery to maximize service life. Compliance with CGA G-7.1 for preparation and CGA-4.1 or ASTM G-93 for cleaning is required, with a certificate of conformance for cleaning results submitted upon delivery. The award will be granted based on the lowest price technically acceptable offer. Quotes must be submitted to Cody Guidry by September 4, 2026, and must include the vendor's SAM CAGE code or UEI, shipping costs, lead time, and warranty or return policy. Delivery is FOB Destination to Orlando, Florida.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

MANNCORP Purchase

Solicitation # 80NSSC26943483Q

The NASA Shared Services Center intends to award a sole source contract to MANNCORP INC for the MANNCORP Purchase under the authority of FAR 12.102(a). This procurement, identified by solicitation number 80NSSC26943483Q, is categorized under NAICS code 334418 and is designated as an 8(a) sole source set-aside. While the NASA Shared Services Center is the procuring entity, the actual performance of the contract will take place at the NASA Goddard Space Flight Center. Interested organizations must submit their capabilities and qualifications in writing to Procurement Specialist McKenzie Hanson by 3:00 p.m. CST on September 7, 2026. These submissions will be used to determine if the procurement will remain sole source or be shifted to a competitive basis. All responses must be written, as oral communications are not permitted, and the acquisition is subject to the NASA FAR Supplement Clause regarding the Center Ombudsman.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE

ACUMENTRICS UPS

Solicitation # 80NSSC26942210

The NASA Shared Services Center is seeking to award a sole source contract to Acumentrics for the procurement of two Uninterruptible Power Supplies (UPS) and associated accessories to support flight research hardware on the NASA PC-12 aircraft at the Armstrong Flight Research Center. This acquisition, categorized under NAICS code 335999, is being conducted as a commercial item procurement per FAR Part 12. The required hardware must feature 1U height for standard 19 inch server racks, 1500 VA/1250 W output capacity with parallel combination capability, and Lithium Iron Phosphate batteries providing 10 minutes of runtime. Technical specifications require certification to MIL-STD-810G, MIL-STD-461F, RTCA/DO-160G, and MIL-HDBK-704-3, and the manufacturer must have a documented history of airworthiness approval at the Armstrong Flight Research Center. The scope of delivery includes the two UPS units and specific accessories, including DC output cables, DC input cables, AC output cables, and a parallel cable, all featuring fungus mitigation. Performance and delivery will be located at the NASA Glenn Research Center in Cleveland, Ohio, with a required period of performance of 30 days after receipt of order. While NASA intends to proceed with a sole source award to Acumentrics, interested organizations were invited to submit capability statements by September 4, 2026, to determine if the procurement should be conducted on a competitive basis.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

DEADLINE

in about 24 hours

Starrco Modular Building

Solicitation # 80NSSC26941007Q

The NASA Shared Services Center is soliciting quotes under RFQ 80NSSC26941007Q for the design, supply, and installation of a 30 by 30 foot pre-engineered, non-load-bearing modular office building to be constructed above a structural steel mezzanine at the Stennis Space Center in Mississippi. The project scope includes the creation of five offices, a conference area, a breakroom appliance counter, and two stairway exits. Technical requirements specify that the mezzanine must be engineered to IBC 2024 standards to support a 125 PSF live load, and wall panels must maintain a Class A flame spread rating. The installation must also include ADA-compliant lever locksets on steel doors and tempered safety glass for windows and vision lites. This is a small business set-aside procurement utilizing a firm-fixed-price contract type. Award will be granted based on the lowest price technically acceptable (LPTA) basis, requiring offerors to demonstrate that all solicitation requirements can be met satisfactorily. Delivery is specified as FOB Destination, and the NASA project manager is responsible for final inspection and approval. Quotes are due by September 3, 2026, at 12 p.m. CT and must be submitted via email to Sara Jusino-Terry. Offerors must be registered in the System for Award Management and comply with U.S. export control laws, including ITAR and EAR regulations.

Prefabricated Wood Building Manufacturing

POSTED

DEADLINE

in about 3 hours