Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Test and Evaluation (T&E) Support

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract provides comprehensive test and evaluation support for the Electromagnetic Aircraft Launch System and Advanced Arresting Gear systems, encompassing experimentation, system performance testing, software testing, and integration testing to ensure operational readiness and technical validation. All activities are focused on assessing and verifying the functionality, reliability, and integration of these critical naval aviation systems within their intended operational environments. The work is performed under a subcontract awarded by the Naval Air Systems Command, part of the Department of Defense, with the primary place of performance located in San Diego. The contract is classified under NAICS code 541380, indicating it pertains to other scientific and technical consulting services. The solicitation was posted on May 4, 2026, and while details such as set-aside status and point of contact are not specified, the scope is strictly limited to technical evaluation and testing support for EMALS and AAG systems without broader procurement or development responsibilities.

General Info

Support testing and evaluation of EMALS and AAG systems for Naval Air Systems Command, San Diego.

Agency

Department Of Defense → Naval Air Systems Command

NAICS

541380 - Testing Laboratories and Services

Place of Performance

San Diego, CA, USA

Set-Aside

NONE

Documents

This scope was carved out of N00019-26-RFPREQ-TPM251-0363.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Advanced Arresting Gear (AAG) Development Engineering Change Proposal (ECP)-I-AAG-0135 Undefinitized Contract Action

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedMay 4

subcontract

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Naval Air Systems Command

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Naval Air Systems Command

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Test and evaluation support including experimentation, system performance testing, computer software testing, and integration testing for EMALS and AAG systems.

Similar Contracts

Same NAICS industry code

Third-Party Inspection and CertificationThis subcontract for Third-Party Inspection and Certification supports the Department of Defense at the Jacksonville Building. The selected provider will perform final inspections and quality validation for prime contractors delivering aviation lighting for the DLA. Responsibilities include conducting functional testing and dimensional inspections using CMM and electrical test equipment to ensure compliance with TDP Rev A Gen 1, culminating in the delivery of certificates of conformance and detailed inspection reports. Critical requirements for this engagement include maintaining CMMC Level 2 certification and coordinating directly with the DCMA for source inspections. The project falls under NAICS code 541380 and is based in Jacksonville, Florida. Interested parties must respond by November 9, 2026.

JACKSONVILLE BLDG

POSTED

about 4 hours ago

DEADLINE

Specialized Testing Laboratory (First Article Test)This subcontract opportunity is for a Specialized Testing Laboratory to perform First Article Testing for prime contractors supporting DLA Weapons Support Land Supplier Operations. The selected provider will be responsible for testing two units using specialized shock and impact testing rigs to verify that performance metrics align with the provided technical data package. The final deliverable for this engagement is a certified FAT Test Report. The project is managed under NAICS code 541380 and will be performed in New Cumberland. Due to the nature of the work, the contractor must have access to ITAR and EAR export-controlled data, and ISO/IEC 17025 certification is preferred. Interested parties must respond by November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 4 hours ago

DEADLINE

First Article Test (FAT) Laboratory ServicesThis subcontract for First Article Test Laboratory Services supports the DLA Weapons Support Nuclear Reactor Program. The selected provider will perform First Article Testing on a single unit of electrical insulation to ensure full compliance with MIL-I-24768/1(1) standards. This process involves utilizing specialized thermal resistance and dielectric testing equipment to validate the component, culminating in the delivery of one validated test unit and a certified First Article Test report. Eligible contractors must hold ISO 9001:2015 or ISO/IEC 17025 certification to qualify for the work. The performance of these services is located at Hill AFB. Interested parties should note the response deadline of November 9, 2026, for this Department of Defense requirement categorized under NAICS code 541380.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 4 hours ago

DEADLINE

Material Testing and Certification LaboratoryThis subcontract for the DLA Weapons Support Land Supply Chain involves providing Material Testing and Certification Laboratory services to perform Production Lot Testing for prime contractors. The primary objective is to validate the quality conformance of O-rings by reviewing material certifications, process operation sheets, and inspection method sheets. Specific technical requirements include verifying asbestos-free composition and ensuring surface imperfections adhere to ISO 3601-3 standards, culminating in the delivery of a comprehensive Test Report. The project is based in Keyport, Washington, and falls under NAICS code 541380. Due to the nature of the technical data handled during the certification process, the contractor must maintain CMMC Level 2 compliance. Interested parties should note the response deadline of November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

First Article Testing (FAT) ServicesThis subcontract for First Article Testing services is issued by the Department of Defense through the DDSP New Cumberland Facility. The selected contractor will perform quality conformance inspection and testing for prime contractors delivering DLA supply contracts, specifically focusing on one prototype unit. Using laboratory equipment, the contractor must verify material specifications, durability, and pressure in strict accordance with MIL-H-24580. The scope of work requires the delivery of a comprehensive test report and one validated First Article unit, with all test results provided to the Engineering Support Activity. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 541380. Performance will take place in New Cumberland, Pennsylvania, with responses due by November 9, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 4 hours ago

DEADLINE

First Article Testing and Inspection ServicesThis subcontract for First Article Testing and Inspection Services involves providing specialized validation for prime contractors supporting Defense Logistics Agency supply contracts. The selected provider will use high-precision metrology equipment, such as optical comparators or CMM, to verify that the dimensions and tolerances of a first-article sample for NSN 5305-01-470-6044 align with required technical data. To qualify, the contractor must maintain an inspection system compliant with ISO 9001 or SAE AS9003 standards. The final deliverables for this engagement include the tested first article unit and a completed FAT certification report. The solicitation was posted on October 28, 2026, with a response deadline of November 5, 2026, under NAICS code 541380.

Defense Logistics Agency

POSTED

about 4 hours ago

DEADLINE

Electrical Testing and Certification LaboratoryThis subcontract opportunity is for an Electrical Testing and Certification Laboratory to provide independent verification and testing of cable assemblies for prime contractors supporting DLA Weapons Support ASC projects. The scope of work involves conducting Product Verification Testing, which includes electrical continuity, voltage withstand, and physical dimension checks. All sampling and inspections must be performed using calibrated measurement tools in accordance with MIL-STD-1916 or ASQ H1331 standards, culminating in the delivery of formal test reports and certifications of compliance. Managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, this requirement is designated as a Total Small Business Set-Aside under NAICS code 541380. The solicitation was posted on October 28, 2026, with a response deadline of November 12, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

Third-Party Quality Conformance InspectionThis subcontract for the DLA Weapons Support Nuclear Reactor Program involves providing third-party quality conformance and critical source inspections for prime contractors. The selected provider will conduct inspections at the point of origin, utilizing precision measurement tools and sampling plans in accordance with MIL-STD-1916 or ASQ H1331 to ensure all technical requirements of the DLA Master List RA001 are met. Key deliverables include the submission of detailed inspection reports and formal quality certification documents. The project is managed by the Department of Defense under NAICS code 541380, with the place of performance located in Jacksonville, Florida. Interested parties must respond by November 9, 2026, regarding this requirement for specialized quality assurance services.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 4 hours ago

DEADLINE

Production Lot Testing and Quality ReportingThis subcontract for Production Lot Testing and Quality Reporting supports the DLA Weapons Support Fluid Handling Division. The selected provider will perform specialized production lot testing and inspections for prime contractors, utilizing pressure testing and leak detection systems. All work must adhere to zero-based sampling plans, specifically MIL-STD-1916, and culminate in the delivery of certified test results and detailed Production Lot Test reports. The project is based in San Diego, California, and falls under NAICS code 541380. Due to the nature of the sensitive data involved, the contractor is required to maintain CMMC Level 2 certification. Interested parties must submit their responses by November 9, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 4 hours ago

DEADLINE

First Article Testing (FAT) and Thread Gaging ServicesThis subcontract opportunity is for the provision of independent laboratory testing and certification services to support prime contractors on DLA Weapons Support ASC projects. The scope of work focuses on conducting First Article Testing and thread gaging for Class 3A and 3B threads to ensure strict compliance with SAE AS8879 Category 1 or MIL-S-7742 standards. The successful provider must deliver a certified First Article Test Report and maintain professional accreditation through either ISO/IEC 17025 or AS9100. Managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, this requirement is designated as a Total Small Business Set-Aside under NAICS code 541380. The place of performance is located at Robins Air Force Base. Interested parties must submit their responses by November 5, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

HazMat Identification and SDS DocumentationThis subcontract opportunity with the Department of Defense at the DDSP New Cumberland Facility involves providing hazardous material identification and documentation services for prime contractors on DLA Troop Support projects. The selected provider will be responsible for identifying hazardous materials in accordance with Federal Standard No. 313 and preparing Safety Data Sheets that comply with 29 CFR 1910.1200(g). Additionally, the contractor must provide hazard warning labels as required by DFARS 252.223-7001 and deliver all completed SDS and HazMat identification lists. The project falls under NAICS code 541380 and will be performed in New Cumberland, Pennsylvania. Interested parties should note that the solicitation was posted on October 28, 2026, with a response deadline of November 9, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 4 hours ago

DEADLINE

Production Lot Test (PLT) and Quality CertificationThis subcontract for the Department of Defense, specifically DLA DIST San Joaquin, involves providing specialized testing and quality assurance validation for prime contractors on DLA supply contracts. The scope of work focuses on executing Production Lot Test requirements in accordance with MIL-STD-1916 or ASQ H1331, Table 1, which includes assigning verification levels for critical, major, and minor attributes. The selected provider must possess JCP Certification to access technical data and maintain the necessary laboratory equipment for gas filter validation. Key deliverables for this engagement include the submission of PLT reports, material certifications, and detailed inspection sheets. The performance of these services will take place in Tracy, California. Interested parties should note the response deadline of November 9, 2026, for this opportunity categorized under NAICS code 541380.

DLA DIST SAN JOAQUIN

POSTED

about 4 hours ago

DEADLINE

More opportunities from Department Of Defense → Naval Air Systems Command

Same awarding agency

P-8A Poseidon APY-10 Field Service Representative (FSR) Support

Solicitation # N00019-26-RFPREQ-APM290-1090

POSTED

about 9 hours ago

DEADLINE

Business Intelligence (BI) & Executive Data StorytellingThis subcontract opportunity with the Naval Air Systems Command under the Department of Defense focuses on Business Intelligence and Executive Data Storytelling for F-35 Joint Program Office projects. The selected provider will perform complex data analysis and develop interactive dashboards using Tableau and Power BI to create visual communication tools and storytelling products tailored for senior executive audiences. Key deliverables include executive briefing reports and ad-hoc analysis of operational data to support prime contractors. The position of performance is located in Arlington, Virginia, and requires personnel to maintain an active Top Secret security clearance. Interested parties should note the response deadline of November 10, 2026, for this effort categorized under NAICS code 541611.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Enterprise Data Architecture & Cloud IntegrationThe Enterprise Data Architecture and Cloud Integration subcontract, issued by the Naval Air Systems Command under the Department of Defense, focuses on designing secure cloud architectures for prime contractors supporting F-35 Joint Program Office projects. The scope of work includes the development of data dictionaries, management of data quality, and the implementation of Attribute-Based Access Control to maintain Authority to Operate compliance across AWS and Azure GovCloud environments. Key deliverables include configured cloud environments and comprehensive enterprise data architecture designs. Due to the sensitive nature of the work performed in Arlington, Virginia, all personnel are required to maintain an active Top Secret security clearance. The solicitation was posted on October 27, 2026, with a response deadline of November 10, 2026, falling under NAICS code 541512.

Computer Systems Design Services

POSTED

DEADLINE

Machine Learning & Predictive Analytics EngineeringThis subcontract, titled Machine Learning and Predictive Analytics Engineering, is issued by the Naval Air Systems Command under the Department of Defense. The project focuses on the development and deployment of production-ready machine learning algorithms to support prime contractors on F-35 Joint Program Office projects. Key objectives include creating solutions for supply-chain optimization, readiness forecasting, and predictive maintenance, utilizing ML engineering pipelines within AWS and Azure GovCloud architectures. The scope of work involves managing CI/CD/CT pipelines and delivering validated source code and predictive models. Due to the nature of the work, an active Top Secret clearance is required. The performance location for this contract is Arlington, Virginia, with a response deadline set for November 10, 2026.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

DEADLINE

F-35 JPO Enterprise Data Science and Analytics Support

Solicitation # N0001927R0054

The Naval Air Systems Command is seeking information for the F-35 JPO Enterprise Data Science and Analytics Support contract, identified by solicitation number N0001927R0054. This effort focuses on the formulation, development, and deployment of production-ready machine learning solutions, including predictive maintenance, readiness forecasting, and supply-chain optimization. The scope includes business intelligence through executive data storytelling and interactive dashboards, as well as the design of secure cloud data architectures using AWS GovCloud, Azure Government, or Snowflake. Technical deliverables must be packaged in security-hardened Docker containers and deployed via Kubernetes or OpenShift, with a requirement for ETL/ELT pipelines to maintain at least 98 percent data completeness and accuracy. The anticipated period of performance consists of one 12-month base period with four 12-month option periods. Work may be performed at contractor facilities, authorized government locations in the National Capital Region, or through approved hybrid arrangements. Due to the sensitive nature of the work, the company must be U.S.-owned and headquartered in the United States, and personnel must possess active Top Secret clearances. Key personnel requirements include a Data Science/Machine Learning Lead, an Enterprise Data Architect, and a Business Intelligence and Analytics Lead. While this is currently a sources-sought RFI and no formal solicitation exists, respondents must be registered in the System for Award Management and fall under NAICS code 541511.

Custom Computer Programming Services

POSTED

DEADLINE

CH-53 FY27 Depot Mods

Solicitation # N00019-26-RFPREQ-APM261-0497

Aircraft Manufacturing

POSTED

DEADLINE

N0001927R1025 E-6B Mercury Depot Maintenance Repair and Overhaul (MRO): Request for Proposal (RFP)

Solicitation # N0001927R1025

The Naval Air Systems Command is soliciting proposals for the E-6B Mercury Depot Maintenance, Repair and Overhaul effort. This will be a single source Indefinite Delivery Indefinite Quantity contract awarded through full and open competition. The anticipated contract structure includes a five-year base ordering period with an option for one additional five-year extension, covering Fiscal Years 2027 through 2036, with the award expected in the fourth quarter of Fiscal Year 2027. Interested offerors must be companies incorporated in the United States and verified via SAM.gov to gain access to the restricted solicitation documents on the PIEE website. Access requires a written request and a certified DD Form 2345. Questions regarding the solicitation are due by November 9, 2026, and final proposals must be submitted by December 11, 2026, though past performance data is encouraged 14 days prior to the deadline.

Aircraft Manufacturing

POSTED

DEADLINE

in about 1 month

P-8A Australian APY-10 Radar Regional Repair Facility

Solicitation # N00019-26-RFPREQ-APM290-0882

The Naval Air Systems Command intends to award a sole source delivery order to The Raytheon Company to establish a regional P-8A APY-10 radar repair and diagnostic capability in Mawson Lakes, South Australia. This initiative supports the United States Navy, Royal Australian Air Force, and approved regional partners. The scope of work includes relocating diagnostic test equipment from Fleet Readiness Center Southeast, establishing repair capabilities for specific Weapon Replaceable Assemblies, providing Field Service Representative support for training and logistics, and procuring a new System Integration Level Test Set and Flight Line Systems Diagnostics system. The contract is being pursued as a sole source procurement because Raytheon is the original designer and manufacturer with the necessary technical data to meet government requirements. The anticipated period of performance runs from the second quarter of fiscal year 2027 through the second quarter of fiscal year 2032. While this is not a request for competitive proposals, the government will consider capability responses for a limited time to determine if a competitive procurement is warranted.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

AN/UPX-50 Common Core Digital Interrogator (CCDI) Productionization

Solicitation # N00019-24-NORFP-TPM213-0037

The Naval Air Systems Command intends to award a sole source, Cost Plus Fixed Fee Basic Ordering Agreement order to BAE Systems Information and Electronic Systems Integration, Inc. for the productionization of the AN/UPX-52 Common Core Digital Interrogator. This project involves transitioning lab-built prototypes into electronics manufacturing environment units, developing unique test equipment and procedures, and integrating the system into existing test equipment. The scope also encompasses Automated Switch-Over production line development and options for CCDI Re-Spin and Unknown Trouble Report corrections. The anticipated total value of the contract is 47 million dollars, with an estimated award date in the fourth quarter of 2026 and a performance period of 32 months. Work will be performed at the BAE Systems facility in Greenlawn, New York. BAE Systems was selected as the sole source because they are the original designer and manufacturer of the related DI systems and possess proprietary technical data not available to the government.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

Distributed Targeting Processor-Networked (DTP-N) Life of Type Buy (LoTB)

Solicitation # N00019-26-RFPREQ-TPM265-0575SYN

The Naval Air Systems Command intends to award a firm-fixed price delivery order to The Boeing Company for a Life of Type Buy of obsolete electronic components for the Distributed Targeting Processor-Networked. This effort supports the F/A-18 and EA-18G Program Office and is expected to begin in August 2027. The work will be performed in Saint Louis, Missouri. This acquisition is being pursued on a sole source basis because Boeing is the original designer and manufacturer of the aircraft and possesses the unique technical expertise required for the project. Consequently, no competitive solicitation will be issued. Interested parties seeking subcontracting opportunities are directed to contact the Boeing Small Business Liaison Officer.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

VH-92A FY28 Spare Parts

Solicitation # N0001926RFPREQAPM2740236

The Naval Air Systems Command intends to award a delivery order and subsequent modifications under Basic Ordering Agreement N00019-23-G-0002 to Sikorsky Aircraft Corporation, a Lockheed Martin company. This non-competitive procurement is for the acquisition of FY28 spare parts and rapid parts procurements to support the VH-92A. The government has identified Sikorsky as the sole source capable of fulfilling the requirement due to their proprietary technical data, expertise, and experience, citing authority under 10 U.S.C. 3204(a)(1) and FAR 6.103-1. While this notice is not a request for competitive proposals, interested parties may submit capability statements within fifteen days of publication for the government to determine if a competitive procurement is warranted. Small businesses seeking subcontracting opportunities are directed to contact Lockheed Martin. The performance of this contract will take place in Stratford, Connecticut, under NAICS code 336413.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Avionics Block III FY27 Retrofit for ACS AMS Generation 5 COMM1 Kits

Solicitation # N00019-26-RFPREQ-TPM265-1047

The Naval Air Systems Command is conducting market research to identify qualified contractors capable of supporting the hardware delivery of Avionics Block III Retrofit Kits and Weapon Replaceable Assemblies for fiscal year 2027. This effort supports F/A-18 F/G, EA-18G, and Foreign Military Sales configurations for the United States Navy and the Royal Australian Air Force. Key hardware requirements include the Advanced Cockpit System, Audio Management System, and Digital Communication System Generation 5. The anticipated contract will be a Firm Fixed Price agreement with a period of performance expected to begin in September 2027. This is currently a sources sought notice for informational purposes and not a formal request for proposal. Interested vendors must submit a one-page capability statement, commercial price lists, lead times, and stock levels to the designated contract specialist by November 10, 2026.

Aircraft Manufacturing

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Quality Testing and Inspection Support (First Article & Batch Testing)

Department Of Commerce Noaa

POSTED

CLOSED

Technical Integration Support for Hygrometers

NASA Shared Services Center

POSTED

CLOSED

Technical Documentation and Compliance Marking

Defense Health Agency Hcd West

POSTED

DEADLINE

5G O-RAN and TSN Performance Testing & Evaluation

Department Of Commerce Nist

POSTED

CLOSED

Safety Program Development and Compliance

US Embassy Rome

POSTED

CLOSED

Non-Destructive Testing (NDT) and Quality Inspection Services

Navsup Weapon Systems Support Mech

POSTED

CLOSED

Gas Quality Assurance and Traceability Documentation

DLA Maritime - Puget Sound

POSTED

CLOSED

Compliance and Certification Management for JMVSS

Commanding Officer

POSTED

CLOSED

FAA-Compliant Aviation Parts Certification & Documentation Services

Aviation Logistics Center (ALC)(00038)

POSTED

CLOSED

Marking and Labeling Compliance Services

W7NR Uspfo Activity Nyang 174

POSTED

CLOSED

Contractor Quality Control and Testing Services

6982AF Central Federal Lands Divisi

POSTED

CLOSED

Aviation Component Testing and Certification Services

Aviation Logistics Center (ALC)(00038)

POSTED

CLOSED

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS