Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

TEST PAPER, CHLORINE

Active
SPE2DH-26-T-5823Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of chlorine test strips, labeled as INSTA-TEST STRIPS, designed to provide instant measurements for free chlorine ranging from 0 to 10 ppm, bromine from 0 to 20 ppm, alkalinity from 0 to 180 ppm, pH from 6.8 to 8.4, and total hardness from 50 to 800 ppm. Each unit is packaged as 50 strips per bottle, blister-carded, with 12 bottles per case totaling 600 strips, and the unit of issue is a single package containing 600 strips. All packaging must comply with commercial standards as outlined in the procurement document, ensuring each unit is sealed in a container that protects against damage or breakage, and shipped in suitable exterior containers capable of safe delivery via common carrier at the lowest possible rate to the designated delivery point on Joint Base Lewis McChord, 98433-5000. Materials must be marked in accordance with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and copies of this standard are available through DLA Troop Support. The solicitation incorporates technical and quality requirements from the DLA Master List, with the applicable revision determined by the solicitation or award date depending on acquisition size. Government identification must be removed from non-accepted supplies, and the contract is identified by solicitation number SPE2DH-26-T-5823, NSN 6640-01-566-7340, with a delivery requirement of five days after award.

General Info

Procurement of INSTA-TEST STRIPS for chlorine, bromine, alkalinity, pH, and hardness, 600 strips per case, delivered to Joint Base Lewis McChord in 5 days.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIIN FSHView Agency

NAICS

333998 - All Other Miscellaneous General Purpose Machinery ManufacturingView NAICS

Place of Performance

BLDG 9640 S L STREET BAY F, JOINT BASE LEWIS MCCH, WA, 98433-5000, US

Set-Aside

NONE

Documents

(1)

SPE2DH-26-T-5823.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIIN FSH
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIIN FSH
View Agency Profile
Office AddressUS
Contacts
Tina Vu
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
TEST PAPER,CHLORINE
TEST PAPER, CHLORINE, INSTA-TEST STRIPS, 600S
SHALL HAVE THE FOLLOWING CHARACTERISTICS:
SHALL MEASURE FREE CHLORINE 0 TO 10 PPM<(>,<)>
BROMINE 0 TO 20 PPM, ALKALINITY 0 TO 180 PPM<(>,<)>
PH 6.8 TO 8.4 AND TOTAL HARDNESS 50 TO 800 PPM
WITH INSTANT RESULTS.
SHALL BE SUPPLIED 50 STRIPS PER BOTTLE, BLISTER
CARDED, WITH 12 BOTTLES PER CASE; TOTAL 600
STRIPS.
.
UNIT OF ISSUE PACKAGE (600 EA/PG)
.
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
SPE2DH-26-T-5823
SECTION B
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
ADEQUATE DATA FOR THE NSN/Part Number: 6640-01-566-7340 Quantity: 1 PG Purchase Request: 7017752035QTY: 1 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333998
New
DIBBS
SKID, PLATFORM
Solicitation # SPE8EF-26-T-1567
The contract is for the procurement of 2,243 units of a SKID, PLATFORM identified by NSN 3990-01-484-6521 under solicitation SPE8EF-26-T-1567, with a total price of $2,243.00 per unit. Delivery is required FOB origin within 167 days of the contract award, with inspection and acceptance points both set at the destination. All supplies must comply with the DLA Master List of Technical and Quality Requirements, which take precedence over other standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with wooden pallets and containers constructed from heat-treated wood certified by an ALSC-recognized agency, marked clearly and visibly. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required unless otherwise stated, and critical, major, and minor attributes must be verified at levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Oak and chestnut wood must be bark-free, square-edged, or have a moisture content of no more than 20 percent. The contractor is responsible for inspecting each shipment for compliance. Deliveries must be sent to DLA Distribution Red River in Texarkana, Texas, with an original required delivery date of February 5, 2027, and a need ship date of February 1, 2027. The unit of issue is each, with no variance allowed in quantity.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333998
New
DIBBS
LIFTER ASSEMBLY
Solicitation # SPE7M2-26-T-6025
The LIFTER ASSEMBLY is a defense-related item with the NSN 1720-00-994-6267, requested in a quantity of two units under Purchase Request 7017227143, with a delivery deadline of 131 days after delivery order. The item is subject to stringent export control regulations under either ITAR or EAR, meaning its technical data cannot be disclosed to foreign persons, including foreign nationals employed by U.S. companies or subsidiaries, without prior authorization from the Department of State or Department of Commerce. Distribution of this technical data is restricted to DLA contractors who hold valid US/Canada Joint Certification Program certification, have completed required training on handling DOD export-controlled data, and have been formally approved by DLA to access such information. The solicitation, identified as SPE7M2-26-T-6025, was posted on August 5, 2026, with responses due by August 17, 2026, and falls under NAICS code 333998. Performance of the contract is designated for New Cumberland, Pennsylvania, 17070-5002, and the primary point of contact is Alisha Blanton of the Department of Defense’s Nuclear Reactor Program, reachable via email and phone. The contract is managed through the DLA and fully subject to DFARS 252.225-7048 regarding export control compliance.
NUCLEAR REACTOR PROGRAM

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333998
New
DIBBS
BRACKET, CYLINDER ST
Solicitation # SPE8E9-26-T-3323
The contract pertains to the procurement of a BRACKET, CYLINDER ST with NSN 4210-01-141-4027 and part number 52427, supplied by TYCO FIRE PRODUCTS LP. A total of 27 units are required at a unit price of $27.00, resulting in a total contract value of $729.00. Delivery is scheduled to occur within 167 days from the contract date, with FOB origin terms and inspection and acceptance points set at the destination. All packaging must conform to MIL-STD-2073-1E and MIL-STD-129, with no special marking required, and palletization must adhere to DLA packaging requirements. The item is classified as a commercial item, and all technical and quality specifications referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled based on the acquisition type and solicitation timeline. The delivery address is the DLA Distribution DDSP New Cumberland Facility in New Cumberland, PA, and the shipment must comply with DLA transportation notes C19 and C20 for freight and first destination handling. The required ship date is February 1, 2027, and the original delivery deadline is April 16, 2027. The solicitation was issued under contract number SPE8E9-26-T-3323, with a response deadline of August 17, 2026, and is managed by the Department of Defense’s Construction & Equipment MRO Service I under NAICS code 333998.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333998
New
DIBBS
COALESCING PLATE AS
Solicitation # SPE7M1-26-T-227C
The contract is for the procurement of seven coalescing plate assemblies with part number 6051700-G2 and NSN 4330014863398, issued under solicitation SPE7M1-26-T-227C by the Department of Defense’s Maritime Supply Chain. Delivery is required within 168 days of contract award, with shipment to be made FOB origin and final inspection and acceptance to occur at the destination facility in New Cumberland, Pennsylvania. The units must be packaged in strict compliance with MIL-STD-2073-1E and MIL-STD-129, using specified packaging materials and methods, and palletized according to DLA’s packaging requirements. The contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for approved exemptions such as batteries, fluorescent lights, sensors, weapon systems, and specific chemical reagents, with portable devices containing mercury requiring shock-proof construction and secondary containment per NAVSEA 5100-003D. The unit of issue is each, with zero variance allowed in quantity, and the total contract value is $49.00 at a unit price of $7.00 per unit. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions referenced as of the solicitation issue date, and special handling and shipping instructions are defined by DLA Procurement Notes C19 and C20.
MARITIME SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 333998
New
DIBBS
HEAD, SPRINKLER, FIRE
Solicitation # SPE8E6-26-T-4007
The contract solicitation SPE8E6-26-T-4007 is for the procurement of four fire sprinkler heads, part number 2-1/2 in. SCF70W brass, identified by NSN 4210-01-386-3436, to be supplied by BETE FOG NOZZLE, LLC from Greenfield, Massachusetts. The total contract value is $16.00, with a unit price of $4.000 per item. Delivery is required within 167 days of the award date, with an original delivery target of November 15, 2026, and a need ship date of February 1, 2027, under FOB Origin terms, meaning title and risk transfer to the Government upon release from the contractor’s facility. All supplies must be delivered to the DLA Distribution facility at New Cumberland, Pennsylvania, where inspection and acceptance will occur. Packaging must adhere strictly to MIL-STD-2073-1E and DLA Packaging Requirements (RP001), with unit containers designated as D3, preservation method set to clean/dry, and no preservation material used. Marking must follow MIL-STD-129 with no special marking required, and all shipments must be barcoded and labeled for automated processing. Mercury and mercury-containing compounds are strictly prohibited in the sprinkler heads unless exempted for functional use in instruments, sensors, controls, or required chemical reagents under NAVSEA 5100-003D, with portable items containing mercury requiring shock-proof enclosures and a secondary containment boundary. The contract incorporates numerous FAR and DFARS clauses applying to trafficking in persons, employment eligibility, sustainable products, hazardous material identification, cybersecurity safeguards, subcontracting, payment acceleration for small businesses, and prohibitions on mercury, hexavalent chromium, and items sourced from communist Chinese military companies. The use of WAWF is mandatory for all payment requests and receiving reports. Compliance with the DLA Master List of Technical and Quality Requirements is mandatory, and offerors must provide complete Safety Data Sheets for any hazardous materials and submit hazard warning labels prior to award. All submissions must be made electronically through the DIBBS portal by August 17, 2026, and offerors must be registered in SAM.gov with valid UEI and CAGE codes. The award methodology is implied to be Lowest Price Technically Acceptable, though
DDSP NEW CUMBERLAND FACILITY

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333998
New
DIBBS
NEEDLE, DISSECTING
Solicitation # SPE2DH-26-T-5821
The contract specifies the procurement of curved dissecting needles made of steel, each 2 inches long with sharp points and sized at 36S, intended for use with the 08-955 holder. The unit of issue is a package containing 36 needles per pack, with a total order quantity of three packs. The item is identified by NSN 6640-01-181-3173 and is part of a solicitation issued under SPE2DH-26-T-5821, with a response deadline of August 12, 2026, and a required delivery date within 20 days after award. The acquisition falls under NAICS code 333998 and is managed by the Department of Defense through the Medical Supply Chain FSH office, with delivery required to Fort Campbell, Tennessee. Compliance with technical and quality standards is mandatory, as referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must adhere to commercial standards, with each unit sealed in protective containers and shipped in exterior containers suitable for safe transport via common carrier at the lowest rate. All items must be marked in accordance with Medical Marking Standard No. 1, replacing MIL-STD-129, and copies of this standard are available through DLA Troop Support. The contract also includes provisions for the removal of government identification from non-accepted supplies and indicates that covered defense information may apply, requiring adherence to applicable cybersecurity and data handling protocols. The primary point of contact for inquiries is Tina Vu, reachable via email and phone provided in the contract data.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 333998
New
DIBBS
REDUCER, HOSE, FIRE F
Solicitation # SPE8E6-26-T-3992
The contract specifies the procurement of a fire fighting hose reducer, part number 13218E0470-42, constructed from cast or forged brass in accordance with MIL-DTL-52404C, featuring a 2.5-inch National Hose internal thread with swivel and a 1.5-inch National Hose external thread. Plating is not required, and first article testing is mandatory with two units submitted for testing under government quality assurance representative observation, as dictated by MIL-C-52404C and referenced quality assurance provisions. The item is governed by strict inspection and acceptance protocols at origin, with sampling to comply with MIL-STD-1916 or comparable zero-based plans, and non-conformances not permitted unless otherwise specified. Packaging must adhere to MIL-STD-2073-1E and marking must follow MIL-STD-129, with no special marking requirements. The contract includes a separate line item for the first article test unit priced at $1.00, which is non-reimbursable if the test requirement is waived, and the main procurement line item for 11 units at $11.00 each totaling $121.00, with delivery required within 227 days FOB origin to the DLA New Cumberland facility. All technical and quality requirements referenced are incorporated via the DLA Master List, including specific provisions for casting and forging assistance requests if tooling is unavailable to the contractor. The drawing and specification control revisions are detailed and dated, with the governing standard being MIL-DTL-52404C, and the product classified as Type XV, Class D. The contract explicitly prohibits government identification removal from non-accepted supplies and includes protections for covered defense information. Delivery is restricted to the specified origin point with zero variance allowed in quantity, and transportation logistics are governed by specific DLA procedural notes. The solicitation number is SPE8E6-26-T-3992, with a response deadline in August 2026 and a required delivery date set for April 2027.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333998
New
DIBBS
SEAL, TAMPER PROOF
Solicitation # SPE8E6-26-T-4062
The contract solicitation SPE8E6-26-T-4062, issued by the Department of Defense through DLA Dist San Joaquin, seeks the procurement of 252 tamper-proof seals identified by NSN 4210014461015 under a Women-Owned Small Business set-aside. The item, designated as SEAL, TAMPER PROOF, is priced at $252.000 per unit for a total contract value of $63,504.00, with a fixed quantity and zero variance allowance. Delivery is required FOB Origin within 69 days of order, to the designated receiving warehouse at Tracy, California, with both inspection and acceptance occurring at the destination. Packaging and labeling must strictly comply with MIL-STD-129 for marking and barcoding, and palletization must follow DLA’s RP001 Packaging Requirements. Packaging methodology is contingent on hazard classification per FED-STD-313: non-hazardous items must meet ASTM D3951 unless superseded by a higher-priority requirement from the DLA Master List of Technical and Quality Requirements, which governs all compliance. Hazardous material, if applicable, must adhere to TQ requirement IP025. All packaging must reflect the specified Unit of Issue (MX) and Quantity per Unit Pack (QUP:001) as mandated by the contract. The solicitation incorporates a suite of FAR and DFARS clauses including Authorization and Consent (52.227-1), Unenforceability of Unauthorized Obligations (52.232-39), Accelerated Payments to Small Business Subcontractors (52.232-40), Safeguarding Covered Contractor Information Systems (52.240-93), Postaward Small Business Program Representation (52.219-28), Notification of Potential Safety Issues (252.246-7003), and Transportation of Supplies by Sea (252.247-7023), with deviations and alternates explicitly noted. Offerors must be SBA-certified as a Women-Owned Small Business and provide valid Unique Entity ID and CAGE codes, with mandatory electronic submission through the DIBBS portal by August 17, 2026. Invoicing is exclusively through the Wide Area WorkFlow system, and compliance with the Buy
DLA DIST SAN JOAQUIN

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333998
New
DIBBS
COUPLING ASSEMBLY, HOSE
Solicitation # SPE8E9-26-T-3300
The contract is for the procurement of four coupling assemblies, hose, fire fighting, identified by NSN 4210-00-368-2904 and part number 502, manufactured by Service Brass and Aluminum Foundry in Phoenix, AZ. Each coupling is brass with both ends female, featuring a 2-1/2 inch NH swivel interface with eight flat lugs and must be marked in accordance with MIL-STD-130 Section 5.3.1. Configuration control follows MIL-STD-973, excluding specific subparts. The product must not contain intentionally added mercury or mercury-containing compounds, except for limited functional uses such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or NAVSEA-specified reagents; portable devices containing mercury must be shockproof with a secondary containment boundary per NAVSEA 5100-003D. All packaging, marking, and shipping must comply with MIL-STD-2073-1E and MIL-STD-129, with no special marking required, and palletization must adhere to DLA packaging requirements. Delivery is scheduled for 167 days after award, with FOB origin terms, zero variance allowed in quantity, and inspection and acceptance occurring at the destination. The shipment must be sent to the DLA Distribution facility in New Cumberland, PA, under the parcel post address provided, and transportation instructions follow DLAD Proc Notes C19 and C20. The original required delivery date is October 27, 2026, with a needed ship date of February 1, 2027. The solicitation was issued under SPE8E9-26-T-3300 with a response deadline of August 17, 2026, and is governed by technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with covered defense information potentially applicable. The unit of issue is each (EA), and the contract falls under NAICS code 333998 with the Department of Defense as the contracting agency.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333998
New
DIBBS
TIE DOWN, CARGO, VEHICLE
Solicitation # SPE8EF-26-T-1575
This contract is for the procurement of 260 units of cargo vehicle tie-downs under the NSN 3990-01-619-7774 and part number 592736, issued by the Defense Logistics Agency through solicitation SPE8EF-26-T-1575. The requirement is set as a total small business set-aside, with delivery due 167 days after award, no later than February 1, 2027, and must be shipped FOB origin with zero variance in quantity. All items must comply with the DLA Master List of Technical and Quality Requirements, which supersede ASTM D3951 packaging standards, and must be labeled and packaged according to MIL-STD-129, with palletization following DLA Packaging Requirements. The unit price is $260.00 per unit, totaling $67,600.00, and inspection and acceptance occur at the destination. The supplies are to be delivered to the DDSP New Cumberland Facility in Pennsylvania, with transportation governed by specific DLA procedural notes C19 and C20. Government identification must be removed from non-accepted supplies, and the contract incorporates provisions for covered defense information. The point of contact for inquiries is Russell Keiser, and the NAICS code is 333998.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 15 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333998
New
DIBBS
TUBE ASSEMBLY, FIRE
Solicitation # SPE8E6-26-T-3991
The contract is for the procurement of two tube assemblies for a fire extinguishing system, identified by part number 65506-09014-042 and NSN 4210000895252, to be supplied by ROTAIR AIRCRAFT CORP to SIKORSKY AIRCRAFT CORP. The item must conform to stringent technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, which supersede commercial packaging standards such as ASTM D3951. All packaging and labeling must comply with MIL-STD-129 and DLA’s packaging requirements, with hazardous material handling governed by FED-STD-313 and TQ requirement IP025 if applicable. The item must be marked in accordance with MIL-STD-130N for U.S. military property identification and is subject to Covered Defense Information protocols. The supplier must meet Cybersecurity Maturity Model Certification Level 2 self-assessment requirements, and the delivery is FOB origin with no variance allowed in quantity. Inspection and acceptance occur at the destination, with a required delivery date of February 1, 2027, and a lead time of 167 days from the contract award. The unit of issue is each, with a total contract value based on the specified quantity. The contract is issued under solicitation SPE8E6-26-T-3991 with performance directed to DLA Distribution in San Diego, California, and procurement is restricted due to proprietary or insufficient data for competitive bidding.
SAN DIEGO

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333998
New
DIBBS
BRACKET, FIRE EXTINGUIS
Solicitation # SPE8E6-26-T-4002
The contract is for 54 fire extinguisher brackets with NSN 4210-01-147-6483, designated as a critical application item, specifically designed for use with the ANSUL Sentry Model 2013, 20-pound dry chemical extinguisher. The item manufacturer is TYCO FIRE PRODUCTS LP with part number 30937, and it must be painted red. All supplies must comply with DLA packaging requirements and MIL-STD-2073-1E for preparation, including packaging method 10, dry climate control, and use of standard unit containers and intermediate containers. Packaging and marking must follow MIL-STD-129 with no special marking required. The contract prohibits the intentional addition of mercury or mercury-containing compounds in any hardware or supply, except for approved functional uses such as batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, and chemical reagents specified by NAVSEA; portable devices containing mercury must include shock-proof construction and a secondary containment boundary as per NAVSEA 5100-003D. Delivery is FOB origin with zero variance allowed in quantity, inspection and acceptance occur at destination, and the required delivery date is 76 days from the solicitation, with a need ship date of November 2, 2026, and original delivery date of November 4, 2026. The item is shipped to DLA Distribution at the New Cumberland facility in Pennsylvania, and transportation guidelines are governed by DLAD Proc Notes C19 and C20. The solicitation number is SPE8E6-26-T-4002, issued under a federal acquisition program with NAICS code 333998, and responses are due by August 17, 2026.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIIN FSH

Same awarding agency

NAICS: 325991
New
DIBBS
Dental Utility Wax SupplyThe contract calls for the supply of two boxes totaling 160 units of red dental utility wax with a diameter of 3/16 inch, all of which must meet federal standards for packaging, labeling, and shipment. This requirement is part of a subcontract under the NAICS code 325991, and the solicitation is managed by the Department of Defense through its Medical Supply Chain FSH organization. The opportunity was posted on August 5, 2026, with a response deadline of August 12, 2026, and all deliveries are expected to comply fully with applicable regulatory requirements. While specific performance locations and point of contact details are not provided, the solicitation can be accessed via the DIBBS platform for further participation details.
Custom Compounding of Purchased Resins

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 483110
New
DIBBS
U.S.-Flag Ocean Transportation ServicesThe contract calls for ocean freight delivery services utilizing U.S.-flag commercial vessels to transport medical supplies in strict compliance with the Cargo Preference Act and FAR 252.247-7025, ensuring that all shipments are carried on vessels owned or operated by U.S. citizens as required by federal law. The contractor must provide full support for waiver requests and maintain comprehensive documentation to verify compliance, including vessel details, shipping routes, and cargo manifests, to meet Department of Defense auditing and reporting obligations. All services must be performed with an end destination of Pascagoula, Mississippi, with a firm deadline for responses set for August 12, 2026. This is a subcontract under the Medical Supply Chain FSH agency, classified under NAICS code 483110 for ocean transportation of cargo. The procurement is managed by the Department of Defense and requires adherence to stringent regulatory standards governing the use of domestic-flagged vessels for government-funded shipments. While no set-aside provisions are specified, the subcontractor must be capable of executing international or domestic ocean freight operations with full legal and logistical support for cargo preference compliance. The solicitation is accessible through the DIBBS system and requires detailed proof of vessel eligibility, operational capacity, and documentation systems to ensure uninterrupted supply chain continuity for critical medical materials.

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 541620
New
DIBBS
Radioactive Materials Notification and Special HandlingThe contract requires strict adherence to MIL-STD-129 and Department of Transportation regulations for the identification, labeling, and advance notification of shipments containing radioactive materials that exceed established regulatory thresholds. All vendors must ensure proper labeling and documentation to facilitate safe handling, transportation, and tracking of these high-risk materials throughout the supply chain. The work is tied to nuclear medical supply operations, demanding precision in compliance with federal safety and security protocols to prevent regulatory violations and ensure the protection of personnel and the public. Performance is centered in Pascagoula, Mississippi, with a zip code of 39568, and the contract is issued under the NAICS code 541620, indicating it relates to scientific and technical consulting services within the Department of Defense’s Medical Supply Chain FSH. The solicitation was posted August 5, 2026, and responses are due by August 12, 2026. This is a subcontract opportunity, and all proposers must demonstrate proven capability in handling regulated radioactive shipments, including knowledge of specialized packaging, placarding, shipping papers, and advance coordination with transport and receiving authorities.
Environmental Consulting Services

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 561990
New
DIBBS
Medical Item Packaging and Marking ServicesThe contract pertains to the packaging and labeling of medical supplies in strict compliance with Medical Marking Standard No. 1, requiring precise barcoding, preservation measures, and adherence to unit pack requirements to ensure traceability, safety, and regulatory alignment. All work must be executed to meet the rigorous standards expected for military and defense medical logistics, with an emphasis on accuracy, durability, and consistency across all labeled items. The solicitation is classified as a subcontract under NAICS code 561990, with a response deadline of August 12, 2026, and a posted date of August 5, 2026. Performance is designated for Pascagoula, Mississippi, 39568, under the oversight of the Department of Defense through the Medical Supply Chain FSH office. This opportunity is open to qualified subcontractors capable of delivering compliant packaging solutions in a timely and efficient manner to support critical defense medical supply operations.
All Other Support Services

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Handling and Labeling ComplianceThe contract pertains to regulatory compliance services focused on the identification, documentation, and labeling of hazardous materials shipments in accordance with federal and military standards. The work is tied to the Department of Defense’s Medical Supply Chain FSH and requires strict adherence to established protocols for handling dangerous goods, ensuring all shipments meet safety and regulatory requirements during transport and storage. The scope encompasses accurate classification, proper labeling, and complete recordkeeping to support audit readiness and operational compliance across military logistics networks. Performance is required at the location in Pascagoula, Mississippi, with a ZIP code of 39568. The opportunity is structured as a subcontract under NAICS code 541690, which covers other scientific and technical consulting services, and is open for response until August 12, 2026. The solicitation was posted on August 5, 2026, and bidders must be prepared to demonstrate expertise in hazardous materials regulations, experience with DoD supply chain requirements, and the ability to deliver compliant documentation and labeling systems reliably under rigorous oversight.
Other Scientific and Technical Consulting Services

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332999
New
DIBBS
Supply of Bronze Strainer for General Purpose SterilizerThe contract calls for the manufacture and delivery of a bronze strainer designed for use in general purpose sterilization equipment, with strict compliance required to DLA technical standards and federal packaging regulations. The component must meet precise engineering and material specifications to ensure functionality and safety within medical sterilization environments, and delivery is expected to the designated performance location in Pascagoula, Mississippi, with a zip code of 39568. The solicitation is classified as a subcontract under NAICS code 332999, indicating it falls under miscellaneous manufacturing, and is issued by the Department of Defense through the Medical Supply Chain FSH organization. Bidders must submit proposals by the response deadline of August 12, 2026, with the solicitation posted on August 5, 2026. All submissions must adhere to federal packaging and labeling protocols, and the successful contractor will be responsible for ensuring the strainer’s material integrity, dimensional accuracy, and compatibility with existing sterilization systems. Although no set-aside designation is specified, the contract is tied to a U.S. government agency and governed by defense supply chain requirements, making adherence to quality control protocols and timely delivery critical for award consideration.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339114
New
DIBBS
POINT, ENDODONTIC
Solicitation # SPE2DH-26-T-5820
Absorbent paper points for endodontic use, fine grade, are supplied in cell packages containing 40 cells of 5 points each, with a total of 200 points per package, which is the unit of issue. The item is identified by NSN 6520-00-904-1978 and is subject to strict technical and quality requirements as defined in the DLA Master List of Technical and Quality Requirements, which governs compliance for both simplified and large acquisitions. Packaging must adhere to DLA specifications, and all supplies must be labeled with the date of manufacture, expiration or retest date, and contract or lot number in accordance with the latest revision of MMS1A. The item has a non-extendable shelf life of 48 months, with no more than seven months elapsed from the date of manufacture to delivery to the government. Government identification must be removed from any non-accepted supplies, and covered defense information may apply. Bidders are required to specify the source and part number being offered. The solicitation, issued by the Department of Defense under the Medical Supply Chain FSH, has a response deadline of August 12, 2026, and requires delivery within five days of award to JBER, AK, 99506-4400.
Dental Equipment and Supplies Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 423450
New
DIBBS
BATTERY, ANALYZER, RECHA
Solicitation # SPE2DH-26-T-5815
The contract pertains to the procurement of two rechargeable batteries specifically designed for use with the ISTAT Analyzer, identified by NSN 6630-01-526-4098 and listed under the broader description of Battery, Analyzer, Rechargeable. Each unit must be packaged in a sealed commercial container that ensures protection against damage or breakage during transit, and all units must be shipped in suitable commercial exterior containers that guarantee safe and cost-effective delivery to the point of delivery specified in the contract, which is Fort Campbell, ZIP 42223-5000. All packaging and marking must strictly comply with Medical Marking Standard No. 1, which supersedes any reference to MIL-STD-129, and bidders are required to specify the source and part number of the battery being offered. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and the revision in effect at the time of solicitation issuance controls compliance. The contract is subject to DLA packaging standards and rules regarding removal of government identification from non-accepted supplies. The unit of issue is each, with a total quantity of two units required, and delivery must be completed within 20 days of the award date. The solicitation, issued under SPE2DH-26-T-5815, was posted on August 5, 2026, with responses due by August 12, 2026, and is managed by the Department of Defense’s Medical Supply Chain FSH with Tina Vu as the primary point of contact.
Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334515
New
DIBBS
ANALYZER, BLOOD GLUCOSE
Solicitation # SPE2DH-26-T-5819
The contract is for the procurement of Prodigy Pocket Blood Glucose Analyzer Kits, blue in color, which are compact, lightweight, and designed for ease of use without requiring manual coding— Simply inserting a test strip automatically powers the device. The meter requires only a small blood sample, enabling convenient alternate site testing for patients, and delivers accurate results in seven seconds. It stores up to 120 test results with date and time stamps and provides seven, fourteen, and twenty-eight day averages for trend tracking. Each unit is supplied as a kit, with a total quantity of eleven kits ordered under NSN 6630-01-690-1933, and delivery is required within twenty days after award. Packaging must comply with Medical Marking Standard No. 1, replacing all references to MIL-STD-129, with each unit sealed in a protective container and shipped in commercial exterior packaging suitable for safe delivery via common carrier at the lowest cost. The procurement is governed by DLA technical and quality requirements referenced in the DLA Master List, and applicable defense information handling protocols apply. The solicitation number is SPE2DH-26-T-5819, issued on August 5, 2026, with a response deadline of August 12, 2026, and the point of performance is Fort Campbell, with Tina Vu listed as the primary point of contact.
Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339114
New
DIBBS
TESTER, PULP, DENTAL
Solicitation # SPE2DH-26-T-5826
The contract is for a Digitest 3 Pulp Vitality Tester, a 9-volt dental device used to assess pulp vitality in teeth, supplied as a complete unit including four autoclavable probe tips—standard long, standard short, labial, and lingual—as well as a ground wire with clip and a 9-volt battery. The unit is identified by NSN 6520-01-706-0601 and is to be delivered in a single quantity to a military address in APO, with a delivery window of 20 days from award. Technical and quality specifications referenced in the DLA Master List of Technical and Quality Requirements apply, and the supplier must comply with DLA packaging standards and requirements for removing government identification from non-accepted items. The solicitation, issued under SPE2DH-26-T-5826, has a response deadline of August 12, 2026, and is governed by NAICS code 339114 for dental equipment manufacturing. The contracting activity falls under the Department of Defense, through the Medical Supply Chain FSH, with Tina Vu as the primary point of contact. The product is classified with potential covered defense information applicability, requiring adherence to relevant data security protocols.
Dental Equipment and Supplies Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334516
New
DIBBS
TUBING, LYSE, ANALYZE
Solicitation # SPE2DH-26-T-5629
The contract specifies the procurement of one unit of tubing for lysing and analyzing in hematology systems, manufactured by Beckman Coulter Inc. with part number 6805686 and NSN 6630-01-525-5546, under solicitation SPE2DH-26-T-5629. The item is classified as a regulated medical device by the FDA and requires the contracting official to submit a referral via EBS with full bidder and manufacturer details for validation. All packaging must comply with commercial standards and the Medical Marking Standard No. 1, which replaces MIL-STD-129, ensuring proper labeling, protection from damage, and safe delivery via common carrier to the destination at the lowest cost. The delivery is FOB destination within 20 days, with no tolerance for quantity variance, and inspection and acceptance occur upon arrival. The item is subject to DLA’s Master List of Technical and Quality Requirements and applicable defense information handling protocols. The unit of issue is one each, priced at $1.00, with the point of performance listed as Fort Bliss, Texas, and primary contact information provided for inquiries.
Analytical Laboratory Instrument Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details