Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Third-Party Inspection and Sampling Services

Active

Federal

Response Deadline11/02/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Third-Party Inspection and Sampling Services supports the DLA Weapons Support Nuclear Reactor Program. The selected provider will perform independent quality assurance and verification for prime contractors, utilizing calibrated precision measurement and gauging tools to ensure zero-nonconformance. Work involves executing sampling plans according to MIL-STD-1916 or ASQ H1331 and verifying strict adherence to MS19068C and MIL-DTL-21337A standards. The contractor must hold ISO 9001 or AS9100 certification and is responsible for delivering detailed inspection reports and certifications of conformance. Performance will take place in New Cumberland, Pennsylvania. Interested parties must respond by November 2, 2026, under NAICS code 541380.

General Info

Third-party inspection and sampling services for DLA Nuclear Reactor Program in Pennsylvania.

Agency

Department Of Defense → DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

NAICS

541380 - Testing Laboratories and Services

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7M2-27-T-0303.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

NUT, PLAIN, ROUND

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 21

subcontract

Response DeadlineNov 2

Submission deadline

Response Deadline

11/02/2026, 05:00:00 PM UTCin 11 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs independent quality assurance and verification for prime contractors on DLA Weapons Support Nuclear Reactor Program projects. Executes sampling plans following MIL-STD-1916 or ASQ H1331 to verify zero-nonconformance and adherence to MS19068C and MIL-DTL-21337A. Utilizes calibrated precision measurement and gauging tools. Requires ISO 9001 or AS9100 certification. Delivers inspection reports and certification of conformance.

Similar Contracts

Same NAICS industry code

RFB 2027-2029 Magnetic Rope Testing at Cannon Mountain

Solicitation # 620ab69e-b8ee-4b85-8c97-59ad786962a0

The New Hampshire Department of Natural and Cultural Resources is seeking a contractor to provide non-destructive electromagnetic wire rope testing and inspection services for the Cannon Mountain Aerial Tramway and Peabody Express for the 2027-2029 period. The scope of work requires the contractor to provide all labor, equipment, and resources to test four aerial tramway track cables and the complete length of the Peabody Express detachable lift haul rope. Key deliverables include detailed written inspection reports documenting test results, detected deterioration, wire breaks, loss of metallic area, and recommendations for corrective actions or follow-up monitoring. The contract is a fixed-budget arrangement with the award based on the lowest cost. Bids must be submitted by November 16, 2026, at 2:00 PM EST. Eligible vendors must be registered with the NH Bureau of Purchase and Property and, if applicable, be in good standing with the NH Secretary of State. Required insurance includes comprehensive general liability of at least $1,000,000 per occurrence and $2,000,000 aggregate, as well as workers compensation. Services are to be performed between 7:00 A.M. and 4:00 P.M., with the state requiring ten days advance notice for scheduling. Invoices are submitted monthly and paid within thirty days upon the state's satisfaction and acceptance of the work.

Department Of Natural & Cultural Resources

POSTED

DEADLINE

NDT and Quality Inspection ServicesThis subcontract for NDT and Quality Inspection Services supports prime contractors on DLA Aviation fuel valve projects for the Department of Defense. The scope of work involves performing critical quality assurance and non-destructive testing, specifically utilizing Fluorescent Penetrant Inspection, Magnetic Particle Inspection, and hydrostatic pressure testing. All work must be conducted using calibrated equipment by certified NDT technicians to ensure technical compliance. The selected provider is responsible for delivering detailed inspection reports and certifications of conformance. This opportunity is categorized under NAICS code 541380 and is associated with DLA Aviation in Oklahoma City. The response deadline for this requirement is November 21, 2026.

Ok DLA Aviation At Oklahoma City

POSTED

about 5 hours ago

DEADLINE

in about 1 month

Specialized Inspection and Testing ServicesThe Specialized Inspection and Testing Services subcontract involves providing independent quality assurance and non-destructive testing for prime contractors on Department of the Navy projects. The scope of work focuses on conducting visual inspections of weld joints according to MIL-STD-2035 and performing dimensional inspections per DI-MDTI-808089B utilizing precision measuring instruments and CMM. Qualified providers must hold Certified Weld Inspector credentials to deliver essential documentation, including conformance inspections, final assembly dimensional reports, and weld joint visual inspection reports. This opportunity is managed by the Navsup Weapon Systems Support Mech under the Department of Defense, with a response deadline set for December 23, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 5 hours ago

DEADLINE

Calibration and Certification Services for Pneumatic Test SetThis subcontract for the Department of Defense involves providing calibration and certification services for pneumatic test sets supporting Navsup Weapon Systems Support projects. The selected contractor will be responsible for the final testing, inspection, and precision calibration of gauges, valves, and sensors. All work must be performed using NIST-traceable standards and precision pressure testing equipment in strict accordance with ANSI/NCSL Z540.3 or ISO-10012-1 standards. The primary deliverables for this engagement include the provision of detailed calibration certificates and a certified Ready For Issue inspection report. This opportunity falls under NAICS code 541380, with a response deadline set for November 23, 2026.

Navsup Weapon Systems Support

POSTED

about 5 hours ago

DEADLINE

in about 1 month

First Article Testing (FAT) & Validation ServicesThis subcontract for First Article Testing (FAT) and Validation Services supports prime contractors on Army Contracting Command Detroit Arsenal projects. The scope of work involves performing independent testing and validation, specifically focusing on airflow, vibration, noise, and stress testing, as well as dimensional inspections against the Technical Data Package. To execute these tasks, the contractor will utilize specialized equipment including wind tunnels, vibration tables, and precision Coordinate Measuring Machines. The selected provider must hold ISO/IEC 17025 accreditation and DD 2345 certification to ensure technical compliance. Key deliverables for this engagement include the submission of a First Article Test Report and a formal certification of compliance. This opportunity is categorized under NAICS code 541380 and is managed through the Department of Defense.

POSTED

about 5 hours ago

DEADLINE

NDT and Mechanical Testing for Special Emphasis FastenersThis subcontract involves providing non-destructive and destructive mechanical testing for special emphasis fasteners on behalf of prime contractors for Navsup Weapon Systems Support Mech shipboard projects. The scope of work includes performing liquid penetrant inspections and wedge tensile testing in strict accordance with T9074 AS-GIB-010/271, MIL-DTL-1222, and ASTM-F606 standards. To qualify, the contractor must maintain ISO/IEC 17025 accreditation and utilize ISO 10012 calibrated tools. Deliverables for this engagement consist of certified test reports and certification data submitted via DD Form 1423. The opportunity is categorized under NAICS code 541380 and is managed by the Department of Defense.

Navsup Weapon Systems Support Mech

POSTED

about 5 hours ago

DEADLINE

CSI Certification and Data Reporting ServicesThis subcontract for CSI Certification and Data Reporting Services involves providing specialized inspection and certification for prime contractors working on US Navy Critical Safety Item projects. The scope of work requires the verification of critical characteristics according to the Technical Data Package and the application of DI-MISC-80678 data requirements. The selected provider is responsible for preparing Certification and Data Reports and submitting all necessary information through the Electronic Contractor Data Submission system using PKI Digital Certificates. Final deliverables include a validated Certificate of Compliance and a completed Certified Data Report. This effort is managed under the Department of Defense via the Navsup Weapon Systems Support Mech.

Navsup Weapon Systems Support Mech

POSTED

about 5 hours ago

DEADLINE

First Article Testing and Validation (Nuclear C Seal)This subcontract for the Department of Defense and Navsup Weapon Systems Support Mech involves the first article testing and validation of nuclear C seals. The selected contractor will perform both destructive and non-destructive testing to verify that material properties and dimensional accuracy align with TDP Version 002 and IRPOD requirements. All work must be conducted using certified NDE tools and adhere strictly to MIL-I-45208 quality standards. The primary objective of the contract is to produce certified test reports and supporting data necessary for the submission of DD Form 1423. This opportunity falls under NAICS code 541380, with a response deadline set for November 23, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 5 hours ago

DEADLINE

in about 1 month

Countermeasure Receiver RFI Testing and CertificationThis subcontract for Navsup Weapon Systems Support involves providing final performance testing and inspection services for prime contractors. The scope of work focuses on the RFI certification of Countermeasure Receivers, utilizing calibrated measurement tools and specialized test tooling. Additionally, the contractor is responsible for conducting dimensional readings in accordance with 46 CFR 51 and creating sequential process diagrams. To be eligible, the contractor must hold ISO 9001 or SAE AS9100 certification. The primary deliverables for this engagement are the RFI Certification and a Final Inspection Report. This opportunity falls under NAICS code 541380 and is managed by the Department of Defense.

Navsup Weapon Systems Support

POSTED

about 5 hours ago

DEADLINE

NDT and Hydrostatic Testing Services for Level I ComponentsThis subcontract involves providing independent non-destructive testing and hydrostatic pressure testing for shipboard valve projects supporting the Department of Defense via NAVSUP Weapon Systems Support Mechanicsburg. The selected provider will perform ultrasonic, X-ray, or dye penetrant inspections along with pressure chamber testing to certify Special Emphasis Level I integrity. Key deliverables include the provision of certified test reports and formal compliance certifications. To be eligible, the contractor must hold ISO/IEC 17025 and ISO 10012 accreditations and maintain a Confidential security clearance. The opportunity falls under NAICS code 541380, with a response deadline set for November 23, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 5 hours ago

DEADLINE

in about 1 month

Non-Destructive Testing (NDT) ServicesThis subcontract for Non-Destructive Testing (NDT) Services involves providing specialized hull and structural inspections for prime contractors working on USCG vessel projects. The scope of work focuses on conducting ultrasonic thickness measurements and side-scan ultrasonic testing of hull plating to ensure structural integrity. The selected provider will be responsible for delivering comprehensive thickness measurement data and detailed inspection reports. Managed by the Department of Homeland Security under agency CG-SEA-C21, the work is designated for performance in Santa Barbara, California. The opportunity falls under NAICS code 541380, with a response deadline set for November 16, 2026.

POSTED

about 5 hours ago

DEADLINE

Aviation Component Testing and Inspection Services

Navsup Weapon Systems Support

POSTED

about 5 hours ago

DEADLINE

in about 1 month

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

Same awarding agency

MIL-SPEC Packaging and Palletization ServicesThis subcontract involves providing military-grade packaging and marking services for prime contractors supporting the DLA Weapons Support Nuclear Reactor Program. The scope of work requires the packaging and marking of 15 units in strict accordance with MIL-STD-2073-1E and MIL-STD-129, with palletization performed per DLA requirement RP001. To ensure compliance, the contractor must utilize MIL-SPEC preservatives, specialized wrap, and industrial marking equipment. The completed units are to be delivered FOB Origin to DLA Distribution DDSP New Cumberland, located in New Cumberland, Pennsylvania. This project falls under NAICS code 488510 and is managed by the Department of Defense. Interested parties should note the response deadline of November 2, 2026.

Freight Transportation Arrangement

POSTED

about 24 hours ago

DEADLINE

Precision Nut Manufacturing (MS19068-081)This subcontract involves the precision manufacturing of 15 plain round nuts for the DLA Weapons Support Nuclear Reactor Program. The fabrication process must adhere to basic specification MS19068C and reference specification MIL-DTL-21337A using precision machining equipment. Strict quality controls are mandated, including a zero-nonconformance standard, a prohibition on intentional mercury, and a ban on unauthorized additive manufacturing. The contractor is required to maintain DFARS 252.204-7012 compliance and hold either SAE AS9003 or ISO 9001 inspection systems. Performance will take place in New Cumberland, Pennsylvania. The response deadline for this opportunity is November 2, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 24 hours ago

DEADLINE

MIL-SPEC Opaque Packaging and PreservationThis subcontract for the DLA Weapons Support Nuclear Reactor Program involves providing specialized packaging and preservation services for O-rings. The contractor is responsible for individually packaging units in accordance with SAE AMS2817 and utilizing opaque bags to prevent UV ray exposure as mandated by MIL-DTL-117. All general preparation for delivery must adhere to MIL-STD-2073-1E to ensure the components are ready for shipment. The project is managed under the Department of Defense and will be performed in Bremerton, Washington. Interested parties must respond by November 2, 2026, regarding this requirement categorized under NAICS code 488410.

Motor Vehicle Towing

POSTED

about 24 hours ago

DEADLINE

Manufacturer of High-Specification O-Rings (NSN 5331003226397)This subcontract involves the precision manufacture and supply of 8,765 O-rings, identified by NSN 5331003226397, for the DLA Weapons Support Nuclear Reactor Program. The project prohibits the use of additive manufacturing and requires the contractor to maintain a quality management system compliant with SAE AS9100 standards and an active registration in the System for Award Management. The selected manufacturer must deliver the finished units FOB Origin within 105 days of the order. Performance for this Department of Defense contract is centered in Bremerton, Washington, under NAICS code 339993.

Fastener, Button, Needle, and Pin Manufacturing

POSTED

about 24 hours ago

DEADLINE

Supply of Electromagnetic Relays (NSN 5945-01-357-4243)This subcontract involves the supply of 25 electromagnetic relays for prime contractors under the DLA Weapons Support Nuclear Reactor Program. The contractor is responsible for manufacturing or sourcing relays that strictly adhere to the technical specifications for NSN 5945-01-357-4243. All items must be packaged according to RP001 DLA Packaging Requirements for Procurement, and any components produced via additive manufacturing are subject to ESA evaluation. The contract falls under NAICS code 335314 and is managed by the Department of Defense. Performance of the contract will take place in New Cumberland, Pennsylvania. The solicitation was posted on October 21, 2026, with a response deadline set for November 2, 2026.

Relay and Industrial Control Manufacturing

POSTED

about 24 hours ago

DEADLINE

Domestic Metal Stock SupplierThis subcontract under the DLA Weapons Support Nuclear Reactor Program involves the sourcing and delivery of certified raw metal stock for prime contractors. The supplier is responsible for providing materials specifically for the production of NSN 5310-00-141-1795 flat washers, ensuring all stock meets the strict requirements of the Buy American Act and the Berry Amendment. To verify domestic origin and material grade, the supplier must provide comprehensive Mill Test Reports upon delivery to the manufacturer. The project falls under NAICS code 331110 and is managed by the Department of Defense. Performance for this contract is centered in Tracy, California. Interested parties should note the response deadline of November 2, 2026, for this domestic metal stock supply opportunity.

Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

about 24 hours ago

DEADLINE

Manufacturer of Flat Washers (NSN 5310-00-141-1795)This subcontract involves the manufacture and supply of 17,110 flat washers under NSN 5310-00-141-1795 for the DLA Weapons Support Nuclear Reactor Program. The contractor is responsible for fabricating these components according to Navy Identified Critical Safety Item protocols and must maintain an SAE AS9100 certified quality management system. All deliverables must adhere to the Buy American Act and the Berry Amendment, with packaging and marking following MIL-STD-2073-1E and MIL-STD-129 standards. The project is managed by the Department of Defense and will be performed in Tracy, California. Interested parties must submit their responses by November 2, 2026. The contract falls under NAICS code 332722 and serves prime contractors supporting critical nuclear reactor program infrastructure.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 24 hours ago

DEADLINE

Industrial Nameplate SupplierThis subcontract opportunity is for an industrial nameplate supplier to provide etched or printed nameplates for prime contractors supporting the DLA Weapons Support Nuclear Reactor Program under the Department of Defense. The selected supplier will be responsible for fabricating 1,616 nameplates featuring the specific text LOCKED CLOSED, utilizing either metal or composite materials. All deliverables must strictly adhere to DLA Technical and Quality Requirements. The project is categorized under NAICS code 332999, with the place of performance located in New Cumberland. Interested parties must submit their responses by the deadline of November 2, 2026.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 24 hours ago

DEADLINE

MIL-SPEC Rivet SupplierThis subcontract opportunity is issued by the Department of Defense under the DLA Weapons Support Nuclear Reactor Program for the procurement of round head rivets. The selected supplier will be responsible for manufacturing or distributing rivets that strictly adhere to the material and dimensional requirements of military standards, specifically meeting MIL-R-5674 as a replacement for MIL-R-1150. The total quantity required must be sufficient to support 1,616 valve assemblies. The contract falls under NAICS code 333613 and specifies New Cumberland as the place of performance. Interested parties must submit their responses by November 2, 2026. This requirement is designed to support prime contractors operating on DLA supply contracts to ensure the integrity and standardization of critical hardware components.

Mechanical Power Transmission Equipment Manufacturing

POSTED

about 24 hours ago

DEADLINE

Locking Device Valve Manufacturer/SupplierThis subcontract involves the manufacture and supply of 1,616 complete Locking Device Valve assemblies for prime contractors supporting the DLA Weapons Support Nuclear Reactor Program. Each assembly must include a round head rivet, a plain flat washer, and a Locked Closed nameplate. All components must strictly adhere to the DLA Master List of Technical and Quality Requirements, with specific compliance required for rivets under MIL-R-5674. The project is categorized under NAICS code 336310 and will be performed in New Cumberland, Pennsylvania. Interested parties must respond by November 2, 2026, to fulfill the requirements of this Department of Defense procurement effort.

Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

about 24 hours ago

DEADLINE

MIL-SPEC Packaging and Freight Services

Motor Vehicle Towing

POSTED

about 24 hours ago

DEADLINE

Circuit Breaker Locking Device Supplier

Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 24 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS