Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Travel, Installation, Testing, and Commissioning of AFM System

Active

International

Response Deadline08/18/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the on-site installation, calibration, testing, and commissioning of an atomic force microscopy system at the National Research Council of Canada facility in Ottawa. The work requires specialized technical expertise to ensure the system is fully operational and meets all performance specifications upon completion. This is a subcontract under the Government of Canada, classified under NAICS code 811212, pertaining to other commercial and industrial machinery and equipment repair and maintenance. The solicitation was posted on July 23, 2026, with a response deadline of August 18, 2026, requiring all proposals to be submitted by that time. All activities must be performed at the designated NRC facility in Ottawa, and the successful bidder must provide personnel capable of handling high-precision scientific equipment under strict environmental and operational conditions.

General Info

On-site installation and commissioning of atomic force microscope at NRC Ottawa by qualified personnel under government subcontract.

Agency

Government of Canada → National Research Council of CanadaView Agency

NAICS

811212 - Computer and Office Machine Repair and MaintenanceView NAICS

Place of Performance

CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 23

subcontract

Response DeadlineAug 18

Submission deadline

Response Deadline

08/18/2026, 07:00:00 PM UTCin 21 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyGovernment of Canada → National Research Council of Canada

ContactsNo contacts available

OfficeN/A

Organization / Agency

Government of Canada → National Research Council of Canada

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

On-site installation, calibration, testing, and commissioning of the AFM system at the NRC facility in Ottawa.

Similar Contracts

Same NAICS industry code

4-Year Advanced Exchange Maintenance for Vertex 25EI SystemThe contract provides for four years of ongoing maintenance and support services specifically for the Vertex 25EI system, with a focus on advanced exchange of defective units to ensure minimal downtime and continuous operational readiness. This arrangement guarantees that any malfunctioning components will be promptly replaced with fully functional units through an advanced exchange process, eliminating the need for traditional repair cycles and significantly reducing service disruption. The maintenance services are designed to sustain the system’s performance over the full contract term, covering diagnostic support, troubleshooting, and hardware replacement as necessary, all aligned with the high reliability standards required for critical applications. The contract is classified as a subcontract under NAICS code 811212, which pertains to electronic and precision equipment repair and maintenance. It is administered by the Department of Veterans Affairs through the 245-NETWORK Contract Office 5 (36C245), and the opportunity was posted on July 27, 2026, with responses due by July 31, 2026. Although specific performance locations and point of contact details are not provided, the scope implies nationwide support capabilities to meet the needs of the agency's distributed infrastructure. The terms are structured to ensure uninterrupted system availability, emphasizing proactive service delivery and rapid component turnover.

245-NETWORK Contract Office 5 (36C245)

POSTED

about 21 hours ago

DEADLINE

On-Site Preventive Maintenance and Technical Support Services for DSCThe contract outlines ongoing on-site preventive maintenance, remote diagnostics, troubleshooting, and technical support services for a DSC instrument following its installation. This includes timely software updates and replacement of sensors as needed to ensure optimal instrument performance and reliability. Services are expected to be delivered consistently after installation, with the provider responsible for maintaining system functionality through proactive and reactive technical interventions. The contract is classified as a subcontract, with the University of Southern Mississippi identified as the organizing agency under the Mississippi office. It is categorized under NAICS code 811212, indicating it pertains to commercial and industrial machinery and equipment repair and maintenance. The solicitation was posted on July 26, 2026, with a response deadline of August 12, 2026, and is accessible via the Mississippi Department of Finance and Administration’s contract bidding portal. The place of performance and point of contact details are not specified, suggesting the location and primary liaison may be determined upon award.

UNIVERSITY of SOUTHERN MISSISSIPPI

POSTED

DEADLINE

Quality Assurance and Statistical Sampling InspectionThe contract requires comprehensive quality assurance services including first article inspections, in-process quality checks, and final acceptance testing conducted through statistical sampling methods mandated by MIL-STD-1916 or ASQ H1331. All inspection activities must adhere strictly to these standards to ensure product conformity and reliability, with accurate documentation of test results and calibrated equipment records maintained throughout the process. Non-conformance reports must be systematically generated and managed to track, analyze, and resolve deviations from specification. This subcontract is classified under NAICS code 811212 and is issued by the Department of Defense through the AVIATION SUPPLY CHAIN ESOC BUYS organization. The solicitation was posted on July 26, 2026, with responses due by August 3, 2026, and performance is expected to take place under the oversight of a defense supply chain entity. While specific location details are not provided, the work is tied to defense aviation supply chain operations requiring rigorous compliance with federal quality protocols and traceable documentation practices.

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Marking and Labeling ServicesThe contract requires the application of compliant marking and labeling to unit packages and shipments in strict accordance with MIL-STD-129R, ensuring all external and internal documentation meets military specifications for visibility, durability, and traceability. This includes the use of standardized barcoding systems, the specialized marking code ZZ for unique identification requirements, and precise labeling of component lead finishes as defined by IPC/JEDEC J-STD-609A to ensure material compatibility and reliability in defense applications. All work must be executed with precision to support logistics, inventory control, and field readiness across the Department of Defense supply chain. The contract is classified as a subcontract under NAICS code 811212 and is issued by the Active Devices Division of the Department of Defense, with performance required at a location in San Diego, California, ZIP 92136-3581. Responses are due by August 6, 2026, and the solicitation is active as of July 26, 2026. There is no stated set-aside designation, and the contract is accessible via the DIBBS platform for qualified subcontractors to review and submit proposals. Compliance with all technical standards and timelines is mandatory to meet operational requirements and ensure seamless integration into military logistics systems.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

MIL-STD-129 Marking and LabelingThis contract requires strict adherence to MIL-STD-129 for the application of external shipment and storage labels on military cargo, ensuring all required data elements—such as NSN, quantity, CLIN, and hazard classifications—are accurately and clearly marked. Labeling must meet国防部’s technical and regulatory standards to ensure proper identification, handling, and traceability throughout the supply chain, particularly for items requiring special handling due to hazardous material content. The work is classified as a small business set-aside under the SBA program, meaning only eligible small businesses may bid, and the effort is tied to the NAICS code 811212, which covers repair and maintenance services. Performance of this contract is designated to occur at New Cumberland, Pennsylvania, with a zip code of 17070-5002, and bids must be submitted by the response deadline of August 3, 2026. The contract falls under the subcontract category and is managed by the ASC SUPPLIER OPER OEM DIVISION within the Department of Defense. The solicitation, identified by the reference number SPE4A526T308R, was posted on July 26, 2026, and all labeling activities must comply fully with MIL-STD-129 specifications without exception to meet defense logistics requirements.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Item Unique Identification (IUID) and Barcoding ServicesThe contract requires the application of durable Data Matrix barcodes compliant with MIL-STD-130 for Item Unique Identification on each unit, ensuring full machine readability and resistance to environmental stressors such as heat, moisture, abrasion, and chemical exposure. The work must be performed with precision to meet federal military standards for permanence and legibility, supporting traceability and inventory management across the Department of Defense supply chain. All barcodes must be permanently affixed directly to the item or its immediate component, leaving no room for ambiguity or degradation during operational use. This is a total small business set-aside subcontract under NAICS code 811212, managed by the ASC SUPPLIER OPER OEM DIVISION within the Department of Defense. The solicitation was posted on July 26, 2026, with a response deadline of August 3, 2026, and performance will be centered at the specified location in New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. Participation is restricted to small businesses certified under the Small Business Administration’s set-aside program, and interested parties must submit proposals through the DIBBS platform using the provided reference number SPE4A526T308R.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Production Test and Inspection ServicesThe contract requires the provision of ongoing production testing and inspection services for bolt units to ensure adherence to specified quality standards, including the execution of quality control sampling and the accurate documentation of all inspection results. The work is governed under a subcontract classified as a Total Small Business Set-Aside, exclusively available to small businesses, and falls under the NAICS code 811212 for industrial and commercial machinery and equipment repair and maintenance. The solicitation was posted on July 26, 2026, with a response deadline of August 3, 2026, and is managed by the Nuclear Reactor Program under the Department of Defense. Performance of the contract is required to take place in San Diego, California, with a specified ZIP code of 92136-3581. All activities must align with federal procurement regulations and support the stringent quality assurance demands of defense-related applications.

NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Military Marking and Bar-Coding ServicesThis contract requires the application of permanent MIL-STD-129 compliant markings and barcodes to cable assemblies and their packaging, ensuring adherence to military standards for identification and traceability. The barcodes must be formatted using either GS1 DataBar or Code 128 symbology, with strict requirements for data content, placement, and verification to guarantee accuracy and scannability throughout the supply chain. All marking must be durable and resistant to environmental conditions encountered during storage, transportation, and field use. The work is scoped under the NAICS code 811212 and is classified as a subcontract opportunity posted by the ASC Commodities Division of the Department of Defense. The solicitation is open for responses until August 3, 2026, with performance expected to take place at New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. There is no set-aside designation specified, and while point of contact information is not provided, bidders must access the DIBBS portal via the given link to obtain full details and submit proposals in compliance with the requirements outlined in the solicitation.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Military Shipment Marking & LabelingThis contract requires the application of MIL-STD-129 compliant markings on military shipments, including the use of Special Marking Code 32, hazard labels in accordance with DFARS 252.223-7001, and 2D Data Matrix barcodes to ensure proper identification and handling. All labeling must meet stringent Department of Defense standards for visibility, durability, and data accuracy to support logistics and safety protocols across the supply chain. The work is to be performed at a designated location in New Cumberland, Pennsylvania, with a zip code of 17070-5002, and is classified as a subcontract under a total small business set-aside, meaning only businesses certified as small by the SBA are eligible to bid. The solicitation was posted on July 26, 2026, with a response deadline of August 6, 2026, and is managed by the Fluid Handling Division of the Department of Defense under NAICS code 811212, which pertains to industrial and military equipment repair and maintenance services.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Military-Compliant Marking and SerializationThis contract requires the application of unit- and case-level labeling in strict compliance with Military-Compliant Marking and Serialization standards, specifically adhering to Medical Marking Standard No. 1. The labeling must include standardized identifiers such as the National Stock Number, Unit Identification Code, and appropriate handling codes on all medical supply packages to ensure traceability and operational readiness across the defense supply chain. All work must be performed at the designated place of performance in Fort Bragg, North Carolina, with a response deadline of August 3, 2026, and the solicitation is categorized as a subcontract under NAICS code 811212. The contracting agency is the Department of Defense through the Medical Supply Chain Pharm FSA, indicating this effort supports military medical logistics operations with precise compliance requirements for serialization and marking.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

DEADLINE

Military-Compliant Labeling and Bar-Coding ServicesThe contract requires precise application of shipment and storage labels aligned with MIL-STD-129 standards, ensuring all military shipments are properly marked for identification, tracking, and compliance. This includes generating and affixing barcodes for automated logistics systems, as well as implementing specialized markings for hazardous materials under STO ZD072 and labeling for radioactive substances to meet rigorous safety and regulatory protocols. The work must be performed at the New Cumberland location with a zip code of 17070-5002, where all labeling activities must adhere strictly to Department of Defense specifications to support operational readiness and supply chain integrity. The solicitation is issued as a subcontract under NAICS code 811212, with a response deadline of August 6, 2026, and was posted on July 26, 2026. The contracting office is the DDSP New Cumberland Facility under the Department of Defense, and all performance must occur at the specified location. While no set-aside type is designated, bidders must demonstrate capability in executing military-compliant labeling processes with attention to detail, accuracy, and adherence to federal standards for hazardous and radioactive material handling. Full compliance with labeling, coding, and marking requirements is mandatory for contract award and continued performance.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Government Inspection & Acceptance CoordinationThe contract requires coordination of government inspection and acceptance activities at the origin, encompassing the submission of documentation through the Wide Area WorkFlow system, management of all required paperwork, and timely reporting of any non-conformances. This effort is critical to ensuring compliance with federal standards and timely delivery of accepted goods or services under the terms of the subcontract. The work is focused on supporting the Department of Defense’s Active Devices Division with performance centered in New Cumberland, Pennsylvania, at the designated ZIP code 17070-5002. This is a total small business set-aside under FAR 19.5, classified under NAICS code 811212, and is available exclusively to small business concerns as defined by the SBA. The solicitation was posted on July 26, 2026, with responses due by August 6, 2026. The nature of the contract is a subcontract, indicating it is part of a larger procurement structure managed by a prime contractor. All activities must be executed in alignment with government inspection protocols and documentation standards, with an emphasis on accuracy, traceability, and adherence to regulatory requirements to facilitate smooth acceptance and payment processes.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

More opportunities from Government of Canada → National Research Council of Canada

Same awarding agency

Unable to decompose sub-opportunities due to system unavailabilityThe contract opportunity, posted on July 24, 2026, with a response deadline of August 7, 2026, is classified as a subcontract under the National Research Council of Canada, part of the Government of Canada. The place of performance is designated as the National Capital Region, though no specific city, state, or postal code is provided. The solicitations number, NAICS code, set-aside type, and organization type are not available, and no point of contact information is listed. Attempts to decompose potential sub-opportunities or identify supplier roles have been hindered by system unavailability, preventing the retrieval of detailed prime contract information or associated subcontract opportunities. The official tender notice can be accessed through the Canada Buys portal, but no further contractual terms, scope, or requirements are currently obtainable due to technical limitations.

POSTED

DEADLINE

Security Professional Services – Level 3The contract titled Security Professional Services – Level 3 is a subcontract issued by the National Research Council of Canada under the Government of Canada, seeking cybersecurity expertise to support migration projects. Services required include providing expert guidance on cybersecurity practices, conducting risk assessments, ensuring compliance with applicable standards, and implementing security controls throughout the migration lifecycle. The work is scoped to occur within the National Capital Region (NCR), and the solicitation is open for responses until August 12, 2026, with postings beginning on July 24, 2026. The contract falls under the NAICS code 541690, which categorizes it as other scientific and technical consulting services. There is no set-aside designation specified, and while the exact point of contact and physical address details are not provided, the opportunity is accessible via the Canada Buys portal.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Technical Architecture and Systems Design – Level 3The contract seeks a Level 3 technical architecture and systems design partner to support the Mercury Program migration efforts by delivering detailed technical architecture designs, comprehensive system integration planning, and a forward-looking technology roadmap. The work requires expertise in aligning complex system components, ensuring seamless interoperability, and defining scalable infrastructure strategies to transition legacy systems to modernized platforms. The contractor will be expected to provide actionable insights and structured planning that guide the program’s long-term technological evolution, with a focus on stability, security, and future-readiness. The opportunity is classified as a subcontract under NAICS code 541512, issued by the National Research Council of Canada on behalf of the Government of Canada, with performance required within the National Capital Region. The solicitation was posted on July 24, 2026, and responses must be submitted no later than August 12, 2026. While no set-aside provisions or specific eligibility criteria are outlined, the nature of the work implies a need for proven experience in federal migration projects, cloud-native systems, and enterprise architecture frameworks. Potential bidders should note the absence of a designated point of contact and should rely on the official Canadian Buys portal for full submission details.

Computer Systems Design Services

POSTED

DEADLINE

Business Analysis Services – Level 3The contract titled Business Analysis Services – Level 3 is a subcontract issued by the National Research Council of Canada under the Government of Canada, aimed at supporting system migration initiatives through comprehensive business process analysis, requirements gathering, stakeholder interviews, and detailed documentation. The work is to be performed in the National Capital Region and requires a high level of expertise, indicated by the Level 3 designation, to ensure accurate alignment of business needs with technical system upgrades. The solicitation was posted on July 24, 2026, with a response deadline of August 12, 2026, and falls under NAICS code 541611, which classifies it as management consulting services including business process analysis and related advisory activities. Contractors must demonstrate the ability to engage effectively with diverse stakeholders, translate complex operational requirements into actionable specifications, and produce high-quality documentation to facilitate seamless system transitions. There is no set-aside designation specified, allowing eligible subcontractors to compete without restriction based on business size or ownership characteristics.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Project Management Support – Level 3The contract seeks senior-level project management support for the successful delivery of a migration project encompassing comprehensive planning, execution, monitoring, and stakeholder coordination. The scope requires experienced professionals to oversee end-to-end project lifecycle activities, ensuring alignment with organizational objectives and timely delivery within the National Capital Region. As a subcontract under the Government of Canada, the work involves close collaboration with federal entities and adherence to public sector standards and governance frameworks. The North American Industry Classification System code 541611 indicates the focus is on management consulting services, specifically tailored to project management. Responses are due by August 12, 2026, and potential bidders must be prepared to demonstrate proven expertise in managing complex migration initiatives in a government environment.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

FurnitureThis procurement under solicitation number 25-58244 B is issued by the National Research Council of Canada for the purchase, delivery, and installation of office furniture at Building M-38, 1200 Montreal Road, Ottawa, Ontario, with a required delivery and installation date of October 2, 2026. The requirement is solicited exclusively through the PWGSC Furniture for Workspaces Supply Arrangement (SA) # E60PQ-140003/D or E60PQ-140003/PQ, limiting participation to pre-qualified supply arrangement holders. The scope encompasses Product Categories 1 through 6, including work station systems, work surfaces, filing and storage products, ancillary items such as monitor arms, power modules, and cable troughs, and collaborative products including meeting and collaborative tables, with specific quantities outlined for each line item. All products must conform to the mandatory technical specifications in Annex A and comply with the ANSI/BIFMA e3 Furniture Sustainability Standard at minimum Level 2, alongside the Government of Canada Workplace Fit-up Standards. Offerors must submit fully completed technical and financial offers in separate electronic attachments, restricted to a maximum size of 10MB, with no zip files, links, or paper submissions permitted. Financial information must be contained solely within the financial offer; inclusion of pricing in the technical submission results in disqualification. Two mandatory pass/fail gates require submission of detailed drawings and specifications for NRC verification against Annex A and confirmation of the ability to meet the October 2, 2026, delivery deadline. Offers are evaluated on the lowest price basis, with contract awards made on a per-category basis. Security requirements governed by the attached Security Requirements Checklist (SRC) apply, and contractors must comply with site-specific health and safety plans. Offerors must certify ongoing compliance with all qualification certifications under the SA, including integrity provisions, employment equity, product conformance, and price certification per Part 6B of the SA. Failure to truthfully complete certifications or provide requested verification may result in an offer being deemed non-responsive or contract default. All communications must be directed to the designated contracting authority, and inquiries must be submitted at least three business days prior to the closing deadline of July 22, 2026. Invoices must be sent via email to the designated NRC invoice address, and payment may be processed by credit card if the supplier’s SA permits it. The requirement is

Furniture Retailers

POSTED

DEADLINE

Fiber Laser Cutter for Aluminum and CopperThe National Research Council Canada is seeking a high-precision, enclosed fiber-laser cutting system specifically designed to reliably cut aluminum and copper for battery prototype components, under solicitation number 26-58021. The system must feature a fiber-type laser with a minimum power rating of 3000W and a 10:1 operational turn-down ratio, capable of cutting 0.16-inch aluminum and 1/8-inch copper at a minimum speed of 1 meter per minute. The work area must range between 400x300mm and 635x635mm, with a Z-axis of at least 50mm and positioning precision of 0.1mm or better. Key system requirements include an auto-tracking laser head, fully enclosed operation area, integrated gas assist support for oxygen, nitrogen, and air, and an active protection system to manage back-reflected laser energy. The contract encompasses delivery, installation, commissioning, and training, with all components to be delivered to the NRC Building U91 at 2320 Lester Road, Ottawa, Ontario. Offers must comply with Incoterms® 2020 Delivery at Place (Vancouver, BC) and include all shipping, customs, and duty costs. The acquisition is restricted to Canadian suppliers under the Policy on Reciprocal Procurement and subject to multiple free trade agreements. Submission of proposals is strictly electronic, with offers divided into three separate email attachments labeled Technical Offer, Financial Offer, and Forms—including the Offer Submission Form and Offeror Declaration Form—each not exceeding 10MB total and with no compressed files or external links permitted. Offers must be received by 2 PM EDT on July 27, 2026, and signed by an authorized representative. Mandatory technical criteria, identified with the terms “must” or “mandatory,” are detailed in Annex F and form a pass/fail gate; only offerors meeting all such criteria will be invited to submit sample cuts for verification. Financial offers must adhere to the Basis of Payment outlined in Annex D and clearly separate applicable taxes. Payment terms specify a 30-day period for undisputed invoices, with a 15% withholding for non-resident contractors unless waived by the Canada Revenue Agency. The Contractor must establish an accounting system allowing Canada to identify contract records and must provide all invoices to nrc.invoice-facture.cnrc@nrc-cnrc.gc.ca with full expenditure details, contract number,

Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

DEADLINE

Mercury Program Project SupportThe National Research Council of Canada is seeking qualified professional services to support the delivery of migration projects under the Mercury Program on an as-needed basis to meet shifting operational demands. This solicitation, identified by number 26-58070, was posted on July 24 2026 with a response deadline of August 12 2026 and is open to vendors capable of providing specialized expertise in project support activities critical to the success of the Mercury Program. The work will be performed primarily within the National Capital Region with no specific set aside designation and the contracting authority is Ryan Neumeyer who can be contacted via email or phone for further information. Services are intended to be delivered flexibly in response to real time needs rather than under a fixed schedule or volume.

Other Management Consulting Services

POSTED

DEADLINE

26-58113 Universal Testing Machine with non-contact Extensometer for polymer researchThe National Research Council of Canada is seeking a Universal Testing Machine equipped with a non-contact extensometer for polymer research through a selective procurement process set aside exclusively for Indigenous suppliers under the federal Procurement Strategy for Indigenous Business. The equipment must meet ASTM and ISO standards for measuring tensile and flexural properties of polymer films, sheets, composites, and molded products. Delivery, installation, commissioning, and training must be completed by the end of February 2027 at the NRC’s facility in Winnipeg, Manitoba. Only invited Indigenous businesses are eligible to bid, and selection will be based on compliance with mandatory technical criteria and the lowest aggregate price. All bids must be submitted electronically to the designated NRC address by 2 PM EDT on August 7, 2026, and may be in either official language of Canada. The contract is governed by the Government of Canada’s Integrity Regime and tied to the GSIN N6640 under UNSPSC 41100000 for laboratory equipment. The procurement is accessible only through the Government Electronic Tendering Service, and amendments or responses to inquiries will be communicated directly to invited bidders only; no third-party notifications are guaranteed. The National Research Council emphasizes strict adherence to the set-aside provisions and requires bidders to be registered in the Indigenous Business Directory to qualify for consideration. The contract will be awarded to the single lowest-priced compliant Indigenous bidder, with no exceptions. Melody Ellis, Team Leader of Procurement and Contracting Services, serves as the primary point of contact for all inquiries and must be engaged directly for procedural clarification. Bidders are reminded that Canada assumes no liability for information sourced from external websites or for oversight resulting from reliance on third-party notification services.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

Two (2) Highspeed (15000 fps) CamerasThe National Research Council of Canada is seeking to procure two high-speed cameras capable of recording at 15,000 frames per second through Solicitation 26-58112, with delivery required in Ottawa, Ontario. This procurement is restricted exclusively to suppliers already pre-qualified under Supply Arrangement E60PV-19EQUI for Laboratory and Scientific Equipment, Parts and Accessories, Services and Supplies, and only those suppliers have been invited to submit bids. The solicitation follows a selective tendering process under a competitive procurement strategy that awards the contract to the lowest compliant bid. The notice is published on the Government Electronic Tendering Service for 40 calendar days, with responses due by August 10, 2026, and all bids must comply with a range of international trade agreements including CETA, CPTPP, WTO-AGP, and several bilateral free trade agreements to which Canada is a party. Suppliers not holding the specified supply arrangement are ineligible, and any submissions from non-qualified vendors will not be considered. The award will be made to the responsive bidder with the lowest aggregate price who meets all mandatory technical requirements. Interested parties who are not yet qualified may apply to join Supply Arrangement E60PV-19EQUI by downloading the solicitation document from CanadaBuys and submitting a proposal in accordance with its requirements. All inquiries and submissions should be directed to Helen Tran, Senior Procurement Officer at the National Research Council.

Photographic Equipment and Supplies Merchant Wholesalers

POSTED

DEADLINE

Packaging and Secure Shipment of High-Value Scientific EquipmentThe contract pertains to the secure packaging and shipment of a high-value atomic force microscopy system, requiring full compliance with domestic and international standards to ensure the equipment's protection throughout transit. This subcontract involves specialized handling procedures designed to safeguard sensitive scientific instrumentation from physical damage, environmental stress, and operational disruption during transportation, whether shipped domestically or internationally. The vendor must demonstrate technical expertise in securing fragile, precision-engineered devices and ensure all packaging materials and methods meet or exceed industry benchmarks for scientific equipment logistics. The opportunity is issued by the National Research Council of Canada under the Government of Canada and is categorized under NAICS code 484220, indicating it relates to truck transportation of specialized freight. The solicitation was posted on July 23, 2026, with a strict response deadline of August 18, 2026, at 7:00 PM Eastern Time. Interested parties must submit proposals prior to the deadline, and performance of the contracted services will be executed without specified geographic restrictions, though the equipment's origin and destination are implied to involve Canadian federal research facilities. No set-aside provisions are designated, and all eligible contractors may respond to the tender.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Inspection and Certification of Electrical and Safety ComplianceThe contract requires the electrical inspection and safety certification of an installed AFM system by an authority recognized by the Chief Electrical Inspector, ensuring full compliance with applicable electrical and safety standards. This subcontract is issued under the NAICS code 238210, indicating it relates to electrical contracting services, and is managed by the National Research Council of Canada as part of the Government of Canada’s procurement process. The work must be completed in accordance with official regulatory requirements, and the certifying body must hold the necessary authorization to validate the system’s safety and electrical integrity. The solicitation was posted on July 23, 2026, with a response deadline of August 18, 2026, allowing interested parties sufficient time to prepare and submit proposals. The place of performance and specific location details are not provided, suggesting the work may be conducted at multiple or unspecified sites under the jurisdiction of the National Research Council of Canada. There is no set-aside designation, meaning the opportunity is open to all eligible contractors without preference for small businesses or other categories. The point of contact information is omitted, and all communications and submissions must follow the official tender portal linked in the notice.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE