Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, December 9 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Truck Mounted Attenuator (TMA) Manufacturing

Open

State & Local

Response Deadline11/30/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the manufacture and supply of complete Truck Mounted Attenuator units for prime contractors working on MaineDOT safety equipment projects. The units must be fabricated to MASH NCHRP-350, TL-3 standards to support speeds up to 62.5 mph, utilizing side impact protection and progressive stage crushing. Technical specifications require the use of 5/8 inch steel mounting plates and powder-coated polyester energy absorbing cushions. To ensure quality and safety, the manufacturer must perform 100 percent weld inspections and x-ray verification before delivering fully assembled and tested units. This opportunity is managed under the State of Maine's Motor Transport agency with a response deadline of November 30, 2026.

General Info

Agency

State of Maine → Motor Transport

NAICS

332312 - Fabricated Structural Metal Manufacturing

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of 17D 261112-068.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Crash Attenuator to Create a Master Agreement

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 12

subcontract

Response DeadlineNov 30

Submission deadline

Response Deadline

11/30/2026, 09:00:00 PM UTCin 17 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyState of Maine → Motor Transport

ContactsNo contacts available

OfficeN/A

Organization / AgencyState of Maine → Motor Transport

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufactures and supplies complete Truck Mounted Attenuator units for prime contractors on MaineDOT safety equipment projects. Fabricates units to MASH NCHRP-350, TL-3 standards for speeds up to 62.5 mph using progressive stage crushing and side impact protection. Performs 100% weld inspection and x-ray verification. Uses powder-coated polyester energy absorbing cushions and 5/8" steel mounting plates. Delivers fully assembled and tested TMA units.

Similar Contracts

Same NAICS industry code

Recycling Container Supply & ManagementThis subcontract involves the supply and management of recycling containers for prime contractors working on California Department of Corrections and Rehabilitation projects. The selected provider is responsible for the delivery, installation, and ongoing maintenance of 3-Yard Tilt Bins and 40-Yard Roll-off Bins at designated institution locations. All containers must feature hinged lids and segregation compartments, constructed from either plastic or metal in accordance with specific schematic requirements. The opportunity is categorized under NAICS code 332312 and is managed by the state of California. Interested parties must submit their responses by the deadline of December 16, 2026. This contract ensures that CDCR facilities are equipped with the necessary infrastructure to handle waste segregation and recycling efficiently across various project sites.

California Department of Corrections & Rehabilitation

POSTED

about 10 hours ago

DEADLINE

in about 1 month

Custom Brackets, Mounts, and Hardware Fabrication

OC Public Works

POSTED

about 15 hours ago

DEADLINE

Miscellaneous Metal Fabrications

Capital Buildings Projects

POSTED

about 15 hours ago

DEADLINE

in about 1 month

Metal Fabrications Supplier/Installer

Capital Buildings Projects

POSTED

about 15 hours ago

DEADLINE

Gasket Supply (NSN 5330011926349)This subcontract involves the manufacture or sourcing of 108 specialized gaskets for prime contractors supporting the Defense Logistics Agency Weapons Support Strategic Acquisition Program Directorate. The required components are identified by NSN 5330011926349 and Woodward HRT Inc Part Number 26000211. The contractor must ensure all units are completed, marked, and packaged in strict accordance with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements under RP001. This procurement falls under NAICS code 332312 and is managed through the Department of Defense.

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 18 hours ago

DEADLINE

Aluminum Windshield Center Retainer ManufacturingThis subcontract opportunity, managed by the DLA Weapons Support Strategic Acquisition Program Directorate under the Department of Defense, involves the fabrication and supply of aluminum alloy metal molding for windshield center retainers. The selected provider will manufacture these components to meet the specific requirements of NSN 2590-01-188-3225 and the DLA Master List of Technical and Quality Requirements. All finished products must be packaged according to ASTM D3951, marked per MIL-STD-129, and palletized following RP001 standards for delivery to prime contractors. The procurement is designated as a Total Small Business Set-Aside under NAICS code 332312. Interested parties must submit their responses by November 27, 2026, following the posting date of November 12, 2026. This contract focuses on the precise delivery of specialized metal molding to support ongoing DLA supply chain operations.

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 18 hours ago

DEADLINE

Supply of COVER LOWER (NSN 4810-01-4687590)This subcontract involves the procurement of 31 units of the COVER LOWER component, identified by Part Number 7250060 and NSN 4810-01-4687590, for the DLA Weapons Support Nuclear Reactor Program under the Department of Defense. The selected provider is responsible for manufacturing or sourcing the hardware to meet strict technical specifications and ensuring all items are packaged in accordance with MIL-STD-2073-1E standards for delivery to a designated government facility. The opportunity is designated as a Women-Owned Small Business Set-Aside under NAICS code 332312. Interested parties must submit their responses by November 27, 2026, following the posting date of November 12, 2026.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 18 hours ago

DEADLINE

Supply of Access Covers (NSN 5340007058039)This subcontract involves the fabrication and supply of 153 specialized access covers under NSN 5340007058039 for the Department of Defense Land Supply Chain. The contractor is required to manufacture these units according to strict technical specifications using ISO 9001:2015 quality systems, with packaging and marking adhering to MIL-STD-2073-1E and MIL-STD-129 standards. Performance of the contract will take place in Tracy, California. To ensure the security of ITAR and EAR technical data, the provider must maintain CMMC Level 2 and NIST SP 800-171 compliance, as well as certification through the US/Canada Joint Certification Program. The procurement falls under NAICS code 332312 and is intended to support prime contractors fulfilling Defense Logistics Agency supply requirements.

LAND SUPPLY CHAIN

POSTED

about 18 hours ago

DEADLINE

Corrosion Preventive Anode SupplyThis subcontract with the Department of Defense DLA Weapons Support Nuclear Reactor Program involves the manufacture or sourcing of 1,196 corrosion preventive anodes. The supplier is responsible for ensuring all units meet specific NSN and FSC technical specifications and must adhere to strict packaging, marking, and palletization standards according to MIL-STD-129, MIL-STD-2073-1E, and RP001 DLA requirements. The use of additive manufacturing is permitted provided it undergoes an ESA evaluation. The contract is categorized under NAICS code 332312 and requires delivery of the total unit count FOB Origin. Performance for this contract is centered in Bremerton, Washington. Interested parties must have responded by the deadline of November 23, 2026.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 18 hours ago

DEADLINE

Mounting Plate Fabrication and Supply (NSN 5340012646860)This subcontract involves the fabrication and supply of mounting plates for prime contractors supporting the Defense Logistics Agency Weapons Support Strategic Acquisition Program Directorate. The contractor is responsible for producing plates according to NSN 5340012646860 and specific government drawings, ensuring that all components are free of mercury content. Quality control must be maintained through sampling and inspection in accordance with MIL-STD-1916 or ASQ H1331. Additionally, the contractor must adhere to MIL-STD-129 for marking and MIL-STD-2073-1E and RP001 for packaging requirements prior to the delivery of the finished mounting plates.

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 18 hours ago

DEADLINE

Cold Drawn Round Steel Bar SupplyThis subcontract involves the supply of cold drawn round steel bars to prime contractors supporting the Defense Logistics Agency. The scope of work requires the sourcing or manufacture of steel bars with a 1018/1020 composition, specifically featuring a 2.000 inch diameter and lengths ranging from 18 to 20 feet. The contractor is responsible for delivering 20.000 feet of the specified metal bars along with a mandatory Certificate of Quality Compliance for every shipment sent to the customer or DLA depot. This procurement falls under NAICS code 332312 and is managed through the Department of Defense.

Defense Logistics Agency

POSTED

about 18 hours ago

DEADLINE

Engine Accessory Bracket Manufacturer/SupplierThis subcontract involves the manufacture and supply of 286 engine accessory brackets, specifically identified by NSN 5342012529503, for prime contractors supporting DLA supply contracts. The supplier is responsible for ensuring all units meet strict technical specifications and must possess a valid CAGE code and UEI to be eligible. Performance will take place in Anniston, with deliveries handled FOB Origin in accordance with First Destination Transportation program requirements. Managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, the contract falls under NAICS code 332312. The solicitation was posted on November 12, 2026, with a response deadline of November 20, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 18 hours ago

DEADLINE

More opportunities from State of Maine → Motor Transport

Same awarding agency

Heavy Equipment Delivery (FOB Destination)This subcontract for Heavy Equipment Delivery involves the transport and delivery of completed TMA units for prime contractors working on MaineDOT safety equipment projects. The scope of work requires the hauling of equipment weighing up to 2,000 lbs using specialized trailers or flatbed trucks to Augusta and various other locations throughout the state of Maine. The selected provider must maintain standard DOT registration and commercial hauling insurance to ensure the safe delivery of units to designated destination points. This opportunity is categorized under NAICS code 484220 and is managed through the State of Maine.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Reflective Safety Tape and Marking SupplyThis subcontract for Reflective Safety Tape and Marking Supply involves the provision and application of high-grade reflective safety markings for prime contractors working on MaineDOT safety equipment projects. The scope of work specifically requires the application of diamond grade reflective tape to the rear of TMA units and V-pattern reflective tape to the sides, ensuring all markings strictly adhere to MUTCD rear marking standards and NHTSA side V-pattern requirements. Managed under the State of Maine's Motor Transport agency, the contract focuses on delivering visibility solutions that meet both federal and state safety standards. Interested parties must note the response deadline of November 30, 2026, for this project categorized under NAICS code 339999.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

TMA LED Lighting and Electrical AssemblyThe TMA LED Lighting and Electrical Assembly subcontract involves the supply and installation of comprehensive electrical lighting systems and control boxes for prime contractors working on MaineDOT safety equipment projects. The scope of work includes the installation of rubber-mounted LED exterior lighting, marker lamps, and stop/turn signals, all utilizing ICC-compliant wiring to ensure safety and regulatory adherence. The technical requirements specify the integration of electrical controls into a non-conductive handheld box and the installation of a non-fender mounted light bar. The final deliverable is a fully wired and functional LED lighting system integrated into the Truck Mounted Attenuator. This project is managed under the State of Maine's Motor Transport agency with a response deadline of November 30, 2026.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

DEADLINE

Crash Attenuator to Create a Master Agreement

Solicitation # 17D 261112-068

Solicitation RFQ 17D 261112-068 is a request for a Master Agreement to provide Truck Mounted Attenuators (TMA) for the State of Maine, specifically for the Motor Transport agency. The contract is scheduled for an initial performance period from January 1, 2027, to December 31, 2027, with the possibility of four extension periods. Bids must be submitted via the Advantage Vendor Self Service portal by November 30, 2026. The award will be based on a Best Value determination, prioritizing technical compliance with specifications, price, and delivery timelines, while considering the bidder's past performance over the last five years. Technical requirements specify that the TMA must weigh no more than 1,975 lbs, with a maximum width of 8 feet and a transport length of 7 feet 9 inches. The equipment must meet or exceed MASH NCHRP-350, TL-3 standards for speeds up to 62.5 mph when mounted to a minimum 15,000 lb host vehicle. Safety features must include diamond grade reflective tape on the rear and V-pattern reflective tape on the sides, with all electrical controls housed in a non-conductive handheld box. All units must be delivered FOB Destination, with MaineDOT Fleet Service conducting final inspections within 15 days of delivery to ensure the use of new parts and 100% inspected welds. Payment is handled via check, EFT, or procurement card, with orders over $5,000 requiring a Delivery Order through AdvantageME.

Other Motor Vehicle Parts Manufacturing

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Toolbox Installation

Citywide Administrative Services

POSTED

DEADLINE

Steel Signpost Supplier

POSTED

DEADLINE

RFP-GENE-270000000209-2 | Bleachers

Solicitation # RFP-GENE-270000000209

Genesee School District

POSTED

DEADLINE

Apparatus Body and Compartment Fabrication

Burke County Board of Commissioners

POSTED

DEADLINE

RFI for METROBUS SHELTER REPLACEMENT

Solicitation # WMATA-0000009350

Washington Metropolitan Area Transit Authority

POSTED

CLOSED

over 3 years ago

Window Treatments and Associated Services

Solicitation # 005-RFB-3217-2027

Department of Administrative Services

POSTED

DEADLINE

HSR25-29R1 Invitation for Bids OCS Components

Solicitation # HSR25-29

High Speed Rail Authority

POSTED

DEADLINE

Structural Steel Fabrication & Installation

Virginia Department of Transportation

POSTED

DEADLINE

in about 1 month

Structural Steel Supply

Virginia Department of Transportation

POSTED

DEADLINE

in about 1 month

Structural Steel Fabrication

Virginia Department of Transportation

POSTED

DEADLINE

in about 1 month

8" Standard ML Steel Pipe Supply

Alameda County Water District

POSTED

DEADLINE

in about 11 hours

OCS Pole and Structural Component Fabrication

High Speed Rail Authority

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Get full access

Join 750+ contractors already using CLEATUS