This Solicitation opportunity from Department Of Defense was posted on May 5, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

TUBE ASSY

Closed

SPE4A5-26-T-113PFederal

Submission Closed05/13/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336413

New

DIBBS

SHIELD, HEAT, AIRCRAFThe contract pertains to the procurement of heat shields specifically designed for aircraft, identified by the National Stock Number 2840-01-319-4889. The purchase request indicates a quantity of 10 units to be acquired under solicitation number SPE4A5-26-T-209F. The solicitation was posted on June 3, 2026, with responses due by June 11, 2026. This solicitation is managed by the Defense Logistics Agency within the Department of Defense, representing a federal government procurement effort. While no specific location details for the place of performance or office address are provided, the contract is a standard solicitation without set-aside restrictions or designated NAICS code. The procurement aims to fulfill the military's need for quality heat shielding components tailored for aircraft, ensuring operational safety and performance. Additional details and submission information are accessible through the provided government contracting platform link.

Defense Logistics Agency

POSTED

DEADLINE

GLAND, TAIL ROTOR HYThe contract involves the procurement of ten units of a component identified as the GLAND, TAIL ROTOR HY, with the National Stock Number 1650-01-179-7294. This solicitation, numbered SPE4A5-26-T-199D, was issued by the Defense Logistics Agency under the Department of Defense. The contract posting date was June 1, 2026, and the response deadline for submissions was June 9, 2026. The procurement is categorized under a federal organization type and does not specify any set-aside requirements or North American Industry Classification System code. The contract's specifics, including delivery location and point of contact details, are not delineated within the available data. The contract aims to facilitate the acquisition of parts necessary for tail rotor hydraulic systems, supporting military or defense-related aviation maintenance or operations. The solicitation is publicly accessible through the Defense Logistics Agency’s online portal, indicating transparency and standard federal procurement procedures.

Defense Logistics Agency

POSTED

DEADLINE

FUSELAGE SECTIONThe contract involves the procurement of ten fuselage sections, identified by the NSN/Part Number 1560-00-066-3022, under Purchase Request 7012147535. The solicitation, issued by the Defense Logistics Agency within the Department of Defense, is designated as SPE4A4-26-T-0153 and was posted on June 15, 2026. Interested parties were required to submit their responses by the deadline of June 23, 2026. This procurement is categorized as a federal solicitation without a specified set-aside type or NAICS code. The contract does not specify detailed location information for performance or office addresses. It aims to meet defense logistics needs for critical aircraft components, reflecting the department's ongoing requirements for maintaining and supporting military aviation assets.

Defense Logistics Agency

POSTED

DEADLINE

RIB, STIFFENER, AIRCRThe contract involves the procurement of six units of "RIB, STIFFENER, AIRCR," identified by the National Stock Number (NSN) 1560-01-648-1373. The solicitation number is SPE4A7-26-T-501W, issued by the Defense Logistics Agency under the Department of Defense. The solicitation was posted on June 15, 2026, with a response deadline of June 23, 2026. This is a federal solicitation without any specified set-aside or NAICS code details. The place of performance and office address are not detailed in the contract data. The contract pertains to the acquisition of components likely used in aircraft structural applications, as indicated by the item title. Interested parties could access the solicitation and related documents through the Defense Logistics Agency's official procurement website.

Defense Logistics Agency

POSTED

DEADLINE

BULKHEAD, AIRCRAFTThis contract involves the procurement of a single aircraft bulkhead, identified by NSN/Part Number 1560-01-663-8957, under the purchase request number 7017092553. The solicitation for this item is designated SPE4A6-26-T-92H5 and was posted on June 15, 2026. Interested parties were required to submit their responses by June 23, 2026. The contract is managed by the Defense Logistics Agency, a component of the Department of Defense, reflecting its federal government affiliation. The contract type is a solicitation, indicating that the government invited offers to supply the specified aircraft bulkhead. There is no set-aside designation or NAICS code provided, suggesting open competition or unspecified industrial classification. The place of performance and office address details are not listed, but the contract is marked for performance within the United States. The solicitation and related documents are accessible through the Defense Logistics Agency's online platform for vendor engagement.

Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 7 days

AI Contract Overview

This contract pertains to the procurement of 12 units of a TUBE ASSEMBLY, identified under NSN 1680-01-600-3686 and part number 449-001-167-103, manufactured by Bell Textron Inc. The contract number SPE4A5-26-T-113P was issued by the Department of Defense’s ASC Supplier OEM Division. Delivery is required within 171 days from the order with a required ship date of November 1, 2026, and a final delivery date no later than July 10, 2028. The items will be delivered FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at the destination. The packaging must comply with MIL-STD-2073-1E and MIL-STD-129 marking requirements with specific attention to DLA packaging standards, and palletization protocols are mandated under contract provisions. The contract incorporates several technical and quality requirements in accordance with the DLA Master List and relevant defense acquisition regulations, including tailored higher-level quality requirements and stipulations for sampling inspection methods according to MIL-STD-1916 or comparable standards. This contract also addresses cybersecurity requirements with a CMMC Level 2 Self-Assessment mandate and includes provisions for the removal of government identification from non-accepted supplies as per DFARS guidelines. Additionally, Item Unique Identification is not required per the customer’s request. The contract is managed with strict quality assurance controls categorizing attributes into critical, major, and minor with corresponding acceptance quality levels, ensuring compliance with all applicable standards. The primary point of contact is Kay Bates, reachable via email or phone for coordination related to contract execution.

General Info

Procurement of 12 tube assemblies from Bell Textron; delivery by July 2028; strict quality and cybersecurity requirements.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment Manufacturing View NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE4A5-26-T-113P.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed

PostedMay 5

Solicitation

Response DeadlineMay 13

Deadline has passed

Submission Closed

05/13/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION

Contacts1 person available

OfficeUS

Organization / Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Office AddressUS

Contacts

Kay Bates

contact@example.gov

+1 (555) 000-0000

Full Description

TUBE ASSY
TUBE ASSY
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
CRITICAL APPLICATION ITEM
BELL TEXTRON INC 97499 P/N 449-001-167-103
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
SPE4A5-26-T-113P
SECTION B
PR: 7016644425 PRLI: 0001 CONT’D
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016644425 0001 EA 12.000
NSN/MATERIAL:1680016003686
DELIVERY (IN DAYS):0171
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:33 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:BE OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:11/01/2026 Original Required Delivery Date:07/10/2028
SPE4A5-26-T-113P NSN/Part Number: 1680-01-600-3686 Quantity: 12 EA Purchase Request: 7016644425QTY: 12 Delivery: 171 days ADO