Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

This Government Contract opportunity from Department Of Defense was posted on July 8, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

U.S. Army Space and Missile Defense Command Reagan Test Range (RTR) Reagan Test Range Operations, Sustainment, Improvement, and Engineering (ROSIE)

Closed
W9113M-FY26-ROSIE_IIIFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541715
New
SLED
Sole Source Notice for Alcorn State University Product Development Center (PDC)Alcorn State University is conducting a sole source procurement for professional consulting services through its Product Development Center in Lorman, Mississippi, under solicitation number 9210-27-R-RFIN-00001, with a response deadline of August 10, 2026. The contract, valued at $138,000, involves a twelve-month engagement with Donald & Associates Consulting Group to deliver an integrated suite of services including strategic planning, food manufacturing system implementation, regulatory compliance with HACCP, GMP, SSOP, and OSHA standards, product commercialization, branding, grant development, workforce training, operational documentation, and knowledge transfer. The procurement is justified under FAR 6.302-1 as a sole source due to the vendor’s proprietary methodology, integrated implementation framework, and unique alignment with the university’s institutional goals, eliminating the possibility of competition without duplication of effort or fragmentation of services. Payment is structured as monthly installments of $11,500 based on performance milestones and formal acceptance of deliverables by the university, with no options, extensions, or alternative pricing tiers included. The place of performance is exclusively at the Alcorn State University Product Development Center in Lorman, MS, and all services are to be delivered on-site. Mertha George serves as the primary point of contact for procurement matters and payment coordination, located at 1000 ASU Dr #509, Lorman, MS 39096. Objections to the sole source determination must be submitted by the deadline and may be appealed to the Public Procurement Review Board. No formal contract clauses from the Federal Acquisition Regulation, list of attachments, packaging requirements, evaluation factors, or vendor representations and certifications are included in the documentation, consistent with the nature of the procurement being a non-competitive justification rather than a competitive solicitation. The funding originates from the university’s state appropriation, and while the solicitation references an RFx number and agency code, no specific accounting lines or payment office banking details are provided.
ALCORN STATE UNIVERSITY

POSTED

2 days ago

DEADLINE

in 22 days
NAICS: 541715
New
Federal
NRL Robotics Industry DayThe Naval Research Laboratory is seeking industry partners to participate in a site visit and demonstration focused on the commissioning and upgrading of an existing robotic system to a desired future state, with the goal of enhancing operational capabilities. This effort is being conducted under solicitation number N0017326RFIGF12, issued as a sources-sought notice with no set-aside designation, and is open to all qualified contractors. The event is scheduled with a response deadline of August 3, 2026, and all interested parties must register in advance to attend. The work is expected to take place at the NRL facility in Washington, D.C., with all performance conducted at the specified location. Participation requires adherence to Department of Defense security protocols, including completion of the SECNAV 5512/1 form, which mandates identity verification, background checks including NCIC screenings, and biometric data collection for base access. Applicants must provide proof of citizenship or legal alien status, and all personnel require approval prior to entering the installation. Point of contact for inquiries and registrations is Graham W.J. Fisher, with Ryan Wheelock as secondary contact, both reachable through official Navy email addresses and phone numbers. All submissions and registrations must be completed by the stated deadline to be considered for potential future contract opportunities.
Naval Research Laboratory

POSTED

2 days ago

DEADLINE

in 15 days
NAICS: 541715
New
Federal
Infrared Focal Plane ArraysThe Defense Advanced Research Projects Agency is seeking information on the current state of infrared focal plane arrays and alternative technologies operating in the 3 to 14 micrometer wavelength range, with a focus on both staring and scanning configurations for advanced sensing applications across terrestrial, maritime, air, and space platforms. The request aims to evaluate key performance parameters including FPA size, number of systems required, and total procurement cost to understand trade-offs between area coverage, capability, and affordability. This is not a solicitation for proposals or funding; it is purely a market research effort to inform potential future program development by gathering data on industry capabilities, emerging innovations, and technical benchmarks. Responses are due by August 14, 2026, and should be directed to the designated point of contact at DARPA-SN-26-94@darpa.mil. The notice was posted on July 17, 2026, under the NAICS code 541715 and is administered by the Department of Defense in Arlington, Virginia. While no contract awards are anticipated as a result of this inquiry, the collected insights will support strategic planning for next-generation infrared sensor systems that could be incorporated into future DARPA initiatives. All submissions will be used solely for research and analysis purposes, with no obligation on the part of the government to proceed with procurement based on the responses received.
Defense Advanced Research Projects Agcy

POSTED

2 days ago

DEADLINE

in 26 days
NAICS: 541715
New
Federal
Research and Development Efforts for High Performance ComputingThe U.S. Naval Research Laboratory is modifying its existing Task Order N0017320F2029 with Arcfield to continue specialized Research, Development, Testing, and Evaluation services on a sole-source basis, citing statutory authority that confirms Arcfield is the only responsible offeror capable of meeting the agency's unique requirements. This bridge action extends the period of performance by six months, from 29 July 2026 through 28 January 2027, to ensure uninterrupted support for the Information Technology Division located in Washington, DC. The work focuses on enhancing end-to-end computer network performance across the entire enterprise, encompassing all layers of the network stack including displays, graphical user interfaces, data management, storage systems, security protocols, and governing policies, spanning from the tactical edge to the High Performance Networking Center. The contract remains under the NAICS code 541715 for Scientific Research and Development Services, with no set-aside provisions, and is managed by the Department of Defense through the Naval Research Laboratory. Proposals are due by 20:00 Eastern Time on 27 July 2026, and performance will occur at the laboratory’s facility in Washington, DC, with primary point of contact being Connor Murphy and secondary contact Sonya Diaz De Leon. This modification ensures sustained technical expertise and operational continuity critical to advancing naval high-performance computing capabilities without disruption.
Naval Research Laboratory

POSTED

2 days ago

DEADLINE

in 8 days
NAICS: 541715
New
Federal
RADIOLOGICAL OR NUCLEAR MEDICAL COUNTERMEASURE PRODUCT DEVELOPMENT SUPPORT (PDS)The solicitation 75N93026R00005 seeks support for the development of medical countermeasures against radiological and nuclear threats, specifically targeting advancement toward FDA approval or licensure for acute radiation syndrome and delayed effects of acute radiation exposure. This is an Indefinite Delivery, Indefinite Quantity (IDIQ) contract anticipated to be awarded for a seven-year period beginning on or about July 1, 2027, with no options included in the base contract, although individual task orders may carry term and quantity options. The work will involve a broad range of activities from early research through post-marketing support, including administrative and technical support, development and testing of animal models and new approach methodologies, non-clinical studies for IND/NDA/BLA submissions, chemistry, manufacturing and control support, and Phase I clinical studies. The contractor must possess and demonstrate compliance with Good Laboratory Practice, current Good Manufacturing Practice, and Good Clinical Practice standards, along with adequate scientific and technical personnel, facilities, equipment, and project management capabilities. Collaboration with the National Institute of Allergy and Infectious Diseases, the Food and Drug Administration, and other organizations with existing medical countermeasures is required. Evaluation of proposals will focus on the technical approach and methodology, organizational experience in developing medical countermeasures against radiological and nuclear agents, and the adequacy of personnel, facilities, and compliance systems. Proposals must be submitted online through the NIAID electronic Contract Proposal Submission website by August 31, 2026; submissions via email or fax are prohibited. The solicitation is not set aside for any socioeconomic category and falls under NAICS code 541715, with the National Institutes of Health, through NIAID, serving as the procuring agency based in Bethesda, Maryland. Point of contact for questions includes Karen Telphia and Robert Corno, and the full solicitation is available on SAM.gov.
National Institutes Of Health Niaid

POSTED

2 days ago

DEADLINE

in about 1 month
NAICS: 541715
New
Federal
Commercial Solutions Opening (CSO) Department of the Air Force (DAF) Cost and Software Data Reporting (CSDR) Support and Curation.The Air Force District of Washington, acting on behalf of the Air Force Cost Analysis Agency, has launched a Commercial Solutions Opening to identify commercial technologies and services that advance the Department of the Air Force’s Cost and Software Data Reporting mission. The solicitation targets innovative solutions in automation, advanced analytics, and artificial intelligence or machine learning to improve CSDR planning, verification and validation, compliance support, data curation, metadata tagging, and data quality preparation. Offerors must leverage mature commercial capabilities that align with government-approved platforms and strict data protection standards. This is a two-stage process, beginning with White Paper submissions due by July 27, 2026, after which selected applicants will be invited to submit full proposals. The government reserves the right to award one or more firm-fixed-price contracts based on proposal quality, mission alignment, and funding availability. This acquisition is exclusively reserved for small businesses, with no set-aside for other categories, and is classified under NAICS code 541715 for research and development in the physical, engineering, and life sciences. The solicitation number is FA701426SCS01, posted on July 17, 2026, and responses must be submitted by 5:00 p.m. Eastern Time on July 27, 2026. The contracting office is located at Andrews AFB, Maryland, with primary and secondary points of contact available for inquiries. Performance location details are unspecified, but work will support federal CSDR requirements, and all submissions must comply with the regulatory framework under R-DFARS 212.70.
FA7014 Afdw Pk

POSTED

2 days ago

DEADLINE

in 8 days
NAICS: 541715
New
Federal
Laboratory Microwave Tissue Sample Processing System and Paraffin Processing KitThe USDA-ARS CDPG Grape Breeding Lab in Parlier, California, is seeking a laboratory microwave tissue sample processing system and a paraffin tissue processing application kit to support critical histological workflows for grape breeding research, including microscopy, histology, immunolabeling, and paraffin embedding to analyze tissue structure and disease response. The required equipment is the PELCO BioWave Pro+ Laboratory Microwave Tissue Sample Processing System, model #36700, featuring a 2.45 GHz microwave frequency, 90-750 watts of magnetron power, 15A/115VAC electrical requirements, a built-in vacuum system, integrated magnetic stirring, and a Report/Protocol Manager application, along with the配套 Paraffin Processing Kit, model #36500-40, which includes the PELCO ColdSpot Plus, TissueVac vacuum chamber with 58 cassette holder, Bubbler Probe, HistoWave cassette system for 24 cassettes, and a paraffin heating tile. The contractor must deliver one complete system to the specified address in Parlier, CA, no later than September 1, 2026. Offers must be submitted as a firm fixed price quotation on company letterhead, including all costs such as shipping, the place of manufacture, and must be valid for at least 60 days after submission. Bidders are required to submit a completed SF-1449 form with all line items priced, a current SAM.gov Unique Entity ID, and a capability statement or technical documentation proving compliance with all specifications. All responses must be emailed to Katelyn Nelson at Katelyn.nelson@usda.gov with the exact solicitation title and number as the email subject, and submissions are due by 12:00 PM CST on July 27, 2026. Questions must be submitted no later than 9:00 AM CST on July 22, 2026, using the same subject line requirement. The solicitation number is 1232SA26Q0656, classified under NAICS code 541715, and the contracting office is based in Beltsville, MD. No contract clauses, evaluation factors, inspection criteria, or security requirements are specified beyond the stated deliverables and submission requirements.
USDA Ars Afm Apd

POSTED

2 days ago

DEADLINE

in 8 days
NAICS: 541715
New
Federal
Trusted and Elastic Military Platforms and Electronic Warfare (EW) System Technologies (TEMPEST)The Air Force Research Laboratory, through the AFRL/RY Sensors Directorate, has issued an Advanced Research Announcement titled Trusted and Elastic Military Platforms and Electronic Warfare (EW) System Technologies (TEMPEST) under solicitation FA8650-20-S-1958, with an estimated total program value of $808,505,000 and individual awards ranging from $1,000,000 to $200,000,000. This initiative seeks to advance cybersecurity, open system architecture, avionics, sensor technologies, and multi-domain capabilities for manned, unmanned, autonomous, and remotely piloted platforms, including ISR, EW, and munitions systems. The effort focuses on eight technical areas: assessing platform cyber security, developing cyber-hardened and cyber-resilient platforms, enabling agile system architecture, advancing open system architecture standards, modeling and simulation of RF and electronic systems, and measuring sensor performance in contested environments. Proposals are solicited through a series of future calls under an umbrella contract structure anticipating FAR-based cost-reimbursement, IDIQ, multiple award fair opportunity, and Other Transaction (OT) awards under 10 U.S.C. 4022 or 4023, with OT proposals exempt from FAR clauses. The program requires submission of white papers and full proposals with technical, management, and cost sections formatted in Arial 10-point, double-spaced, with no password protection, and must be valid for 180 days. Security risk and funding availability serve as mandatory pass/fail gates; proposals failing either will be declined. Technical merit is the paramount evaluation factor, followed by cost realism, with peer or scientific review and alignment to agency needs determining best-value selection. Offerors must comply with strict export control, security, and program protection requirements, including ITAR/EAR compliance, Top Secret classification readiness, and protection of Critical Program Information per DoDI 5200.39, with certified DD Form 2345 and DFARS 252.225-7048 required where applicable. All contractors must adhere to AFI 10-701 OPSEC standards, submit to security risk reviews using AFRLI 61-113, complete certifications including CAGE and DUNS numbers, and ensure key personnel are not engaged in foreign talent programs. Safety compliance with MIL-STD 882E and AFI 9
FA2377 USAF Afmc Afrl Pzl Afrl Ryks

POSTED

2 days ago

DEADLINE

in 9 months
NAICS: 541715
New
Federal
IARPA Solutions MarketplaceThe IARPA Solutions Marketplace is a long-term open-call initiative led by the Intelligence Advanced Research Projects Activity in partnership with The Applied Research Institute to accelerate the discovery, evaluation, and procurement of innovative solutions for the Intelligence Community. Designed to streamline access to cutting-edge research, development, prototyping, testing, and sustainment capabilities, the Marketplace serves as a centralized platform where government entities can search, review, compare, and rapidly acquire technologies, software, services, and other solutions from a diverse range of providers including industry, academia, and individual innovators. It removes traditional procurement barriers by enabling direct engagement and negotiation through agile acquisition pathways, ensuring timely delivery of mission-critical capabilities. Solicitations under this initiative are open indefinitely until July 31, 2027, with no set-aside restrictions and are governed under NAICS code 541715 for research and development in the physical, engineering, and life sciences. The program is managed by the IARPA Contracting Office under the Office of the Director of National Intelligence, with all performance taking place in Washington, DC. Interested parties may submit solutions via the posted online portal, and inquiries should be directed to the designated point of contact emails. Participation provides a unique opportunity for innovators to connect directly with IC stakeholders and rapidly transition promising technologies into operational use.
Iarpa Contracting Office

POSTED

2 days ago

DEADLINE

in about 1 year
NAICS: 541715
New
Federal
CWS Engineering Services/Contractor Logistics Support (Sole Source to Invariant Corporation)All communication regarding this solicitation must be directed via email to Scott Alexander at scott.alexander@dla.mil, with no telephone requests accepted. Requests must include the solicitation number SPRRA2-26-R-SP01 in the subject line, along with the requester’s full name, title, telephone number, email address, company name, address, and CAGE code. This acquisition is a sole-source procurement under FAR 6.302-1(a)(1) exclusively for Invariant Corporation, CAGE code 1T4T8, due to the unavailability of competitively obtainable technical data, inability to economically source alternatives, and the inability to create adequate specifications for open competition. The contract will be placed under the existing Indefinite Delivery Requirements Type Contract SPRRA2-24-D-0010 to support the Tactical Aviation and Ground Munitions Project Office by providing personnel, support, and services for the Containerized Weapon Support, CWS-Advance Precision Kill Weapon System, and Serenity programs. Only prequalified firms that can produce the specified items may respond, and foreign entities must route all inquiries through their respective embassies. The response deadline is August 1, 2026, though the solicitation date may shift, but will not close before this date. The NAICS code is 541715, and the contracting office is located at Redstone Arsenal, Alabama, under the Department of Defense.
Al DLA Aviation At Huntsville

POSTED

2 days ago

DEADLINE

in 13 days

AI Contract Overview

Show more

The U.S. Army Space and Missile Defense Command is providing a special notice regarding the anticipated follow-on requirement for Reagan Test Range Operations, Sustainment, Improvement, and Engineering (ROSIE), identified by solicitation number W9113M-FY26-ROSIE_III. This notice is strictly for informational and acquisition planning purposes and does not constitute a solicitation, request for proposal, or any form of commitment from the U.S. Government to issue a contract or award business. No responses are required or requested, and any voluntary submissions will not be returned or compensated. The government has not yet approved the requirement for solicitation and retains the right to modify or cancel the acquisition plan at any time. The anticipated acquisition strategy, pending final approval, is to use the GSA OASIS+ contract vehicle under Special Item Number 60513 for Unrestricted services, categorized under NAICS code 541715 for Enterprise Solutions. If approved, all future acquisition information will be published through the GSA OASIS+ ordering platform, and vendors are encouraged to monitor that channel for updates. The government acknowledges the value of industry feedback from prior engagements and continues to use input to shape the final requirements. The point of contact for inquiries is Tiffany N. Kimbrough, with operations centered at Redstone Arsenal, Alabama, and place of performance at Kwajalein. Any proprietary, sensitive, or classified information should not be submitted, and the government assumes no liability for damages resulting from improper submissions.

General Info

Anticipated ROSIE III contract via GSA OASIS+ for Reagan Test Range support, no solicitation yet, info only.

Agency

Department Of Defense → W6QK Acc-RsaView Agency

NAICS

541715 - Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)View NAICS

Place of Performance

KWAJALEIN, MH-KWA, MHL

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed
Posted

special-notice

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W6QK Acc-Rsa
Contacts2 people available
OfficeREDSTONE ARSENAL, AL, 35898-5000, USA
Organization / Agency
Department Of Defense → W6QK Acc-Rsa
View Agency Profile
Office AddressREDSTONE ARSENAL, AL, 35898-5000, USA
Contacts

Full Description

Show more

This is a Special Notice only. This notice is issued solely to provide interested vendors with information regarding the anticipated Reagan Test Range (RTR) Operations, Sustainment, Improvement, and Engineering (ROSIE) Follow-On requirement. This notice is not a Solicitation, Request for Proposal (RFP), Request for Quotation (RFQ), Request for Information (RFI), or a request for capability statements.


The anticipated requirement has not been approved for solicitation at this time. This notice is provided for informational purposes only and does not constitute a commitment by the U.S. Government to issue a solicitation or award a contract.


No responses are requested or required under this Special Notice.


Acquisition Planning


Based on current market research, the Government's recommended acquisition strategy is to solicit the anticipated requirement through the General Services Administration (GSA) One Acquisition Solution for Integrated Services Plus (OASIS+) contract vehicle under Special Item Number (SIN) 60513, OASIS+ Unrestricted (UR) – NAICS 541715 Exception 3 - Enterprise Solutions.



This acquisition strategy remains subject to final Government approvals and may change prior to the release of any solicitation.



Should the requirement be approved, the Government anticipates posting all future acquisition information through the applicable GSA OASIS+ ordering platform. Interested vendors should monitor OASIS+ for future notices and solicitation information related to this requirement.


Industry Engagement


The Government appreciates the valuable feedback received from industry in response to the previous ROSIE Request for Information (RFI). Industry participation has been instrumental in refining the acquisition strategy and remains an important factor in the development of the final ROSIE requirement.


Disclaimer


This announcement is for informational and acquisition planning purposes only.


No responses are requested or required under this Special Notice. Any information voluntarily submitted to the Government in response to this notice will not be returned.


The U.S. Government will not pay for any information submitted or compensate respondents for any costs incurred in preparing or submitting information in response to this notice.


Respondents shall not submit proprietary, source-selection sensitive, competition-sensitive, or classified information. The Government shall not be liable for, nor incur any consequential damages resulting from, the submission of improperly identified proprietary information.


This notice shall not be construed as a commitment by the Government to issue a solicitation, award a contract, or reimburse any costs associated with responding to this notice.


Should the OASIS+ acquisition strategy be approved, additional information, will be provided through the appropriate GSA OASIS+ acquisition Channels.

More opportunities from Department Of Defense → W6QK Acc-Rsa

Same awarding agency

NAICS: 336413
New
Federal
AH-64 Apache Spares Buy for the Manifold, Oil Filter - Nose GearboxThe Contractor is required to supply all necessary resources including labor, materials, equipment, and data to procure the Manifold Oil Filter – Nose Gearbox for the AH-64 Apache, identified by NSN 1615-01-616-1842 and Part Number 7-511325340-001, with an estimated quantity range of seven to thirty-five units. Delivery is expected at a rate of one unit per month, though early full delivery is permitted, and the final delivery location remains undetermined. Although classified as a non-critical safety item, the Government does not own the technical data package for this part, nor can it acquire the rights to use, develop, or reverse engineer the data; only four approved manufacturers are currently authorized to produce this component: The Boeing Company, Pall Aeropower Corp., Purolator Facet Inc., and Jamica Bearings Company Inc. The acquisition will proceed under Simplified Procedures for Noncommercial Acquisitions per RFO Part 13, resulting in a Firm Fixed Price Indefinite Delivery Indefinite Quantity contract with a five-year performance period composed of five priced ordering periods. Offerors must submit their most favorable terms upfront, as the Government will evaluate quotes and award without discussion. This is a presolicitation notice only, not a request for quotes, and formal submissions will only be accepted after the official solicitation is released on SAM.gov, to which all potential offerors must be registered to participate. The solicitation number is W58RGZ-26-Q-0010, with a posted date of July 17, 2026, and a response deadline of July 31, 2026, managed by the Department of Defense through the Redstone Arsenal office.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

2 days ago

DEADLINE

in 12 days
View Details
NAICS: 336414
New
Federal
Project Manager, Short and Intermediate Effectors for Layered Defense Maneuver-Short Range Air Defense Increment 3, Next Generation Short Range Interceptor ProductionThe U.S. Army’s Project Manager for Short and Intermediate Effectors for Layered Defense, under the Maneuver Short Range Air Defense (M-SHORAD) program, is issuing a Request for Information (RFI) to gather industry input on the production of the Next Generation Short Range Interceptor (NGSRI), a surface-to-air missile system designed to replace the Stinger and counter evolving aerial threats including rotary and fixed-wing aircraft and unmanned systems. This RFI, extended to July 26, 2026, is explicitly not an invitation to bid or a promise to issue a future contract; it serves solely as market research to evaluate industry capabilities, production readiness, and technical solutions for a planned production run of 11,000 missiles and 2,200 Control Launch Assemblies beginning in FY28. Responses must include detailed information on corporate structure, past experience in guided missile manufacturing, production capabilities, risk mitigation strategies, supply chain management, and cost and schedule estimates aligned with the Army’s production timeline, with proposed unit costs based on a ten-year horizon and assumptions around low-rate initial production volumes. All submissions must be unclassified, mark proprietary content clearly, and include a white paper not exceeding 20 pages. Respondents are required to address comprehensive technical and programmatic elements including integration of logistics support, training materials, total package fielding, and Full Material Release processes. The RFI seeks information on manufacturing readiness levels, achievable minimum and maximum production rates, retrofitting costs for compatibility with existing Stinger launcher platforms, and data rights for technical documentation. Companies must identify their business size under NAICS code 336414, specify any small business certifications, and disclose subcontractor involvement, particularly with non-traditional defense contractors or disadvantaged businesses. Responses must be sent via email to designated Army contracting officials by the deadline, with no phone inquiries permitted. The government will use all received submissions to assess industry capacity and inform future acquisition decisions, reserving the right to seek clarifications and emphasizing that no reimbursement will be provided for response costs. All information submitted becomes government property and will not be returned.
Guided Missile and Space Vehicle Manufacturing

POSTED

3 days ago

DEADLINE

in 7 days
View Details
NAICS: 541715
New
Federal
Army Advanced Manufacturing (AdvM) Commercial Solutions Opening (CSO)The U.S. Army Contracting Command – Redstone Arsenal is soliciting innovative commercial solutions through the Army Advanced Manufacturing (AdvM) Commercial Solutions Opening (CSO) numbered W9124P26SC001 to strengthen the Army’s Organic Industrial Base and extend advanced manufacturing capabilities to the tactical edge. This continuous solicitation leverages multiple federal authorities including 10 U.S.C. § 3458, 10 U.S.C. § 4022, Revolutionary FAR Overhaul 6.101(b)(3), and the Employee Stock Ownership Pilot Program to facilitate flexible, non-traditional acquisition pathways for cutting-edge technologies. The focus is on proposals that close critical capability gaps, enhance manufacturing readiness, and improve efficiency across the Army’s industrial and operational ecosystems, with an emphasis on scalable, commercially viable products and processes. Responses are accepted through two mechanisms: direct submission to general Areas of Interest or in response to time-limited Calls for Solutions, both of which are detailed in the governing documentation. All submissions must align with the requirements outlined in the Army AdvM CSO document, with the Active Capability Gap mailbox referenced in Section 4.1. The Government retains the right to update the CSO at any time, replacing prior versions with conformed revisions clearly highlighted in yellow to ensure transparency. Requests for Information posted under this solicitation serve solely for market research and do not obligate the Government to issue a follow-on Call for Solutions. The solicitation remains open indefinitely until formally canceled, but individual Calls for Solutions will have specific submission deadlines. Primary point of contact for inquiries is Stephanie Dillon at usarmy.redstone.acc.mbx.acc-rsa-advm-cso@army.mil, and all participants are urged to monitor the official SAM.gov portal for updates and amendments.
Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

4 days ago

DEADLINE

N/A
View Details
NAICS: 332216
New
Federal
Purchase of Tool Kit, AircraftThe U.S. Department of Defense, through the Office of W6QK Acc-Rsa located at Redstone Arsenal, Alabama, is seeking to procure a tool kit for aircraft under a total small business set-aside contract identified as W58RGZ-26-Q-0004 Amendment 0004. This solicitation is exclusively reserved for small businesses as defined by the Small Business Administration, per FAR 19.5, and falls under the NAICS code 332216, which pertains to industrial mold and die manufacturing. The opportunity was posted on July 14, 2026, with a firm deadline for responses by August 17, 2026, at 11:00 p.m. Eastern Time. The place of performance has not been specified beyond the agency’s location, and delivery is expected to support military aircraft maintenance and operational readiness. Aysia Young serves as the primary point of contact for this procurement, reachable via email at aysia.l.young.civ@army.mil or by phone at 520-851-9942, with Edward A. Peterson listed as the secondary contact at edward.a.peterson4.civ@army.mil or 520-674-8710. Interested small business vendors must submit proposals in accordance with the terms outlined in the amendment and adhere to all federal acquisition regulations. All communications and submissions should be directed to the designated contacts, and further details on requirements, specifications, and evaluation criteria can be accessed through the official SAM.gov portal using the provided UI link.
Saw Blade and Handtool Manufacturing

POSTED

5 days ago

DEADLINE

in 29 days
View Details
NAICS: 334513
New
Federal
Temperature BathsThe U.S. Army TMDE Activity is seeking a brand-name or equivalent procurement of three temperature bath units under a Firm-Fixed-Price contract, designated as a Total Small Business Set-Aside under FAR 19.5, with the NAICS code 334513. The requirement calls for one Fluke Model 6055 High Temperature Bath, capable of operating between 200°C and 550°C at 60Hz/220VAC, and two Fluke Model 7340-16 Compact Temperature Baths, operating between -40°C and 150°C at 60Hz/115VAC, to replace aging calibration equipment at the Army Physical Standards Labs located in Building 5435 at Redstone Arsenal, Alabama. Delivery must be made to the specified address with all units required to be fully functional and ready for immediate deployment. The solicitation, numbered PANRSA26P0000033423949, was posted on July 14, 2026, with responses due by July 29, 2026, and is open exclusively to small businesses certified under the Small Business Administration’s program. There are no specified delivery timelines, FOB terms, or contract options outlined, and no formal pricing, CLIN structure, or contract value is provided. While technical specifications are tightly defined by model number and performance parameters, no formal inspection criteria, packaging standards such as MIL-STD-129, or acceptance testing procedures are detailed. The evaluation methodology is not stated, though the Firm-Fixed-Price nature suggests a potential Lowest Price Technically Acceptable approach. Point of contact for delivery is Matthew Watts, and inquiries may be directed to Wanda Little or Portia Sampson, though no Contracting Officer, COR, or COTR is formally identified. No representations, certifications, or submissions from offerors are included in the documentation, and no special requirements for security clearances, OCI, or key personnel are indicated. Payment procedures, invoicing methods, and accounting data such as TAS or AAC are unspecified, and the solicitation does not provide instructions on proposal format, page limits, media acceptable for submission, or whether electronic submission through a federal portal is required.
Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

5 days ago

DEADLINE

in 10 days
View Details
NAICS: 336413
New
Federal
Overhaul of the Wiring Harness, BranchedThe U.S. Army Contracting Command-Redstone Arsenal is conducting market research under solicitation W58RGZ-26-R-0078 to identify qualified sources capable of manufacturing and supplying 78 units of the UH-60 Wiring Harness, Branched, designated by NSN 6150-01-463-9806 and part number 406876-01. This is not a solicitation for proposals, and no funding is available for response preparation; responses are voluntary and do not obligate the government to award a contract. The requirement is classified under NAICS code 336413 with a small business size standard of 1,250 employees, and the Product Service Code is 6150. Contractors must demonstrate the ability to obtain proprietary data from BAE Systems, as the government does not hold the necessary design rights, and must prove they can meet all special tooling and test equipment requirements either through physical possession, confirmed requisitions, subcontracting, or a detailed plan to develop equivalent tools. Interested parties must submit a capabilities statement of no more than ten pages in Microsoft Word or PDF format to Contract Specialist Mariel Chambers by 5:00 p.m. Central Time on July 31, 2026, with the solicitation number clearly indicated. Submissions must include organizational details, point of contact information, and tailored documentation proving technical and operational capacity, including any intended teaming or subcontracting arrangements. All submitted information marked as proprietary will be protected by the government. Additionally, contractors must be System for Award Management (SAM) registered and approved for providing spares to the government, with Subcontractor Authorization Request (SAR) submissions directed to the ALC SAR Inbox. Responses must not include classified material, and no feedback or evaluations will be provided on submissions.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

6 days ago

DEADLINE

in 12 days
View Details
NAICS: 811210
New
Federal
MAINT & Repair/Replace LetterkennyThe U.S. Army TMDE Activity is seeking a small business contractor to perform maintenance, repair, and replacement of environmental control systems at the TMDE Support Center located at Letterkenny Army Depot in Chambersburg, Pennsylvania. The work includes replacing four indoor evaporators (with existing metal structures retained), four condensing units, and rooftop units installed via crane, along with upgrading the control systems by replacing existing temperature and humidity controllers with PLC controllers housed in new 24x24 NEMA enclosures. A stand-alone PC with VT SCADA software must be provided to monitor, trend, and store data, and the PLCs must be programmed to replicate existing HVAC control parameters. New control panels will be installed to interface with existing equipment, and full startup support and operator training are required. Additionally, the contractor must deliver a written summary of laboratory conditions, including deficiencies and recommended repairs, along with a record of environmental certification. The contract is a firm-fixed-price vehicle under a total small business set-aside, with NAICS code 811210, and requires the original equipment provider who installed the systems during prior renovations to perform the work. Delivery of all items and completion of services must occur within 30 days of order placement, with overall performance expected within twelve months of award. All proposals must be submitted via email by the revised deadline of July 20, 2026, and must include full company information, CAGE code, Unique Entity Identifier, and detailed technical representations confirming compliance with all specified requirements. Offers must clearly state unit and total pricing, any discounts, and confirm adherence to the 30-day delivery schedule. Proposals will be evaluated on a pass/fail basis against minimum technical requirements, with award based on best value combining price and technical capability. Contractors must comply with FAR clause 52.204-9 for personal identity verification of personnel and adhere to Department of Defense security protocols, including NCIC-III and Terrorist Screening Database adjudication for non-CAC holders. The government will provide workspace, storage, and access to equipment at no additional cost. The Force Protection Condition may require changes to security procedures during performance, and all work must occur during normal business hours, Monday through Friday, 0730–1630, unless otherwise scheduled with the government point of contact, Michael Hershey. Quotes received after the deadline or lacking required documentation will be rejected without review.
Electronic and Precision Equipment Repair and Maintenance

POSTED

6 days ago

DEADLINE

in 1 day
View Details