This Solicitation opportunity from Government of Canada was posted on May 19, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

U6318-266961, Acquisition of Liquified Gas Meter Testing and Proving Trailer

Closed

WS5528576662International

Submission Closed05/12/2026, 02:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334519

New

DIBBS

METER, SPECIAL SCALEThe contract is for the procurement of six special scale meters identified by NSN 6625-01-503-0148 under solicitation number SPE7M1-26-T-233L, issued by the Defense Logistics Agency on behalf of the Department of Defense. The solicitation was posted on July 26, 2026, with a response deadline of August 6, 2026, indicating a short procurement window for potential vendors to submit bids. The item is categorized as a federal requirement with no set-aside designation, meaning any qualified contractor may compete for the award. The place of performance and point of contact information are not specified, suggesting the delivery location and coordination details will be determined post-award. The offering is accessible through the DIBBS system for authorized participants to review and respond to the request.

Defense Logistics Agency

POSTED

DEADLINE

INDICATOR, CARBON MONOXThe contract pertains to the procurement of two INDICATOR, CARBON MONOX units with NSN/Part Number 6665-20-001-8480, issued under solicitation number SPE7M1-26-T-232H by the Defense Logistics Agency on behalf of the Department of Defense. The solicitation was posted on July 26, 2026, with a response deadline of August 6, 2026, indicating a brief window for prospective vendors to submit proposals. The item is classified as a federal procurement with no specific set-aside designation, and the place of performance and office address details are not provided, though the contracting agency is based in the United States. Interested parties must respond via the official DIBBS portal using the provided UI link before the deadline to be considered for award.

Defense Logistics Agency

POSTED

DEADLINE

TIMER, INTERVALThe contract is for the procurement of two Interval Timers with the NSN/Part Number 6645-01-212-9474, solicited under SPE4A6-26-T-09PY by the Defense Logistics Agency, a component of the Department of Defense. The solicitation was posted on July 26, 2026, with a response deadline of August 3, 2026, and is classified as a federal acquisition action with no set-aside designation applied. The item is intended for use by a federal entity, though the specific place of performance and point of contact details are not provided. All inquiries and submissions must be directed through the official DIBBS portal linked in the solicitation, where full documentation and requirements are available to potential respondents.

Defense Logistics Agency

POSTED

DEADLINE

SYNCHRO, RECEIVERA solicitation has been issued by the Defense Logistics Agency under the Department of Defense for nine Synchro, Receiver units identified by NSN 5990-00-234-8944. The solicitation, numbered SPE7M5-26-T-353J, was posted on July 26, 2026, with a response deadline of August 6, 2026. The procurement is classified as a federal opportunity with no specific set-aside designation, indicating it is open to all eligible contractors. The place of performance and office address details are not specified, but the contracting activity is based in the United States. Interested parties must submit responses through the official DIBBS platform prior to the deadline to be considered for award.

Defense Logistics Agency

POSTED

DEADLINE

SCALE, WEIGHINGThe contract solicitation is for a scale weighing device identified by NSN 6670-01-657-2981, with a single unit requested under purchase order 7017574019. Issued by the Defense Logistics Agency under the Department of Defense, the solicitation bears the number SPE4A6-26-T-09RE and was posted on July 26, 2026, with responses due by August 3, 2026. The procurement is classified as a federal solicitation with no specific set-aside type designated, indicating it is open to all eligible contractors. The place of performance and office address details are not specified, but the contract is administered within the United States. All technical and logistical requirements for the scale are expected to be defined within the full solicitation document accessible via the provided DIBBS portal link.

Defense Logistics Agency

POSTED

DEADLINE

INDICATOR, DIGITAL DThe contract solicitation is for two digital indicator units identified by NSN 6625-01-562-4580, issued under solicitation number SPE7M1-26-T-232W by the Defense Logistics Agency under the Department of Defense. The request, identified by purchase request number 7017528056, is intended to fulfill a federal procurement need and is open for responses through August 6, 2026, with submissions due by 5:00 PM Eastern Time. The solicitation was posted on July 26, 2026, and no set-aside classification or NAICS code is specified, indicating it is open to all eligible contractors. The place of performance and agency office address details are not provided, but the contract is administered under U.S. federal jurisdiction. Interested parties can access further details via the provided DIBBS portal link.

Defense Logistics Agency

POSTED

DEADLINE

66--TRANSMITTER,RATE OFThe U.S. Department of Defense, through DLA Aviation, is seeking quotes for 20 units of NSN 6680015395947, a TRANSMITTER, RATE OF, to be delivered to W1A8 DLA DISTRIBUTION within 89 days after award. The procurement is conducted under solicitation SPE4A526T309D, which is a combined solicitation issued as a Request for Quote with no hard copies available. Only electronic submissions are accepted, and all responsible sources may respond if their quotes are received prior to the deadline of August 3, 2026. The approved source for this item is specified as 1MU21 60380G523N REV GG, though no specifications, plans, or drawings are provided. This acquisition is set aside entirely for small businesses under the SBA program, with the NAICS code 334519 indicating it falls under other communications equipment manufacturing. The contracting office is located in Richmond, Virginia, and all inquiries must be directed via email to the point of contact listed in the solicitation document, accessible through the provided SAM.gov link.

POSTED

DEADLINE

66--CAISSON GAGEThe government intends to procure 70 units of NSN 3H-6685-017341193-D4, identified as a CAISSON GAGE, under a non-competitive solicitation authorized under FAR 6.302-1, with delivery directed to the Portsmouth Naval Shipyard in Kittery, Maine. All interested parties may submit proposals, quotations, or capability statements within 45 days of the synopsis publication or 30 days if under an existing Basic Ordering Agreement, but this notice does not constitute a request for competitive bids. The Government retains full discretion to determine whether to proceed with a sole-source award based on responses received. The procurement is managed by the Naval Supply Systems Command Weapon Systems Support, with the primary point of contact being Noelle M. Smith, available by phone or email through the official Navy domain. The solicitation was posted on July 25, 2026, and responses are due by August 10, 2026, with the contracting office located in Mechanicsburg, Pennsylvania.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Precision Manufacturing of Control Dial UnitsThe contract entails the precise manufacture and delivery of 33 military-specification control dial units identified by NSN 5355-01-324-4564, with stringent requirements for quality assurance and quality control throughout the production process. Full traceability of materials, components, and manufacturing steps is mandatory, ensuring adherence to MIL-STD-2073-1E for packaging and preservation and MIL-STD-129 for labeling and marking standards. All units must meet exacting military performance and durability specifications without deviation, and documentation must accompany each lot to verify compliance at every stage. The work is classified as a subcontract under NAICS code 334519, indicating specialized manufacturing of other communication equipment, and is managed by the Department of Defense's Land Supply Chain organization. The solicitation opened on July 24, 2026, with a firm deadline for responses set for July 29, 2026, leaving a narrow window for qualified manufacturers to submit proposals. There is no set-aside designation specified, meaning eligibility is open to all qualified suppliers regardless of business size or status. Performance location details are not provided, implying flexibility in manufacturing site selection as long as all deliverables meet the required standards and timelines. Access to the full solicitation details is available through the DIBBS portal using the provided link, and all submissions must align with the Defense Logistics Agency’s procedural requirements for military procurement. Delivery timelines and inspection protocols are implied to be governed by the referenced military standards, with non-compliance resulting in rejection of the entire lot.

POSTED

DEADLINE

THERMOMETER, INDICATINGThe contract issued under solicitation number SPE4A6-26-T-07BM by the ASC Commodities Division of the Department of Defense seeks three indicating capillary tube thermometers with bulb, identified by NSN 6685-01-253-0784 and manufacturer part number 90C01-6383. Delivery is required 97 days after order placement, with a need ship date of October 30, 2026, and shall be made FOB origin to the designated receiving facility in Tracy, California. The item is classified as a critical application item, and no variance in quantity is permitted. Inspection and acceptance occur at the destination point, with full compliance required to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, including a special designation indicating “Delicate instrument.” The packaging must adhere to DLA’s RP001 requirements and explicitly prohibit the use of mercury or mercury compounds in preservation, packaging, and marking, with limited exceptions for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and NAVSEA-specified reagents—all of which must include a secondary containment boundary per NAVSEA 5100-003D. Sampling for quality assurance must follow MIL-STD-1916 or ASQ H1331, Table 1, or an equivalent zero-based plan; acceptance criteria require zero non-conformances unless otherwise specified. Attributes are to be assigned verification levels of VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 for critical, major, and minor characteristics respectively. The contractor must comply with extensive regulatory requirements including DFARS 252.223-7001 for hazardous material labeling, applicable OSHA Hazard Communication standards, and mandatory electronic submission via WAWF for payment and receiving reports. All offers must be submitted electronically through the DIBBS portal, and the acquisition falls under simplified procedures with no bidset available. Compliance with FAR clauses on trafficking, employment eligibility, sustainable products, cybersecurity, mercury prohibition, whistleblower rights, small business representation, and prohibited procurement from communist Chinese military companies is mandatory. The contractor must also provide safety data sheets, adhere to unique entity identifier and CAGE code requirements, and ensure all hardware avoids unintended contact with mercury, except as explicitly permitted under strict containment protocols.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

GAGE, PRESSURE, DIAL INDThe contract is for the procurement of 13 units of a pressure dial indicating gage, identified by NSN 6685012372558 and manufacturer part number EA24-3PPP-EWB0, under solicitation SPE4A5-26-T-292Y, with a total contract value of $169.000 at $13.000 per unit. Delivery is scheduled for 158 days after the order date, with a required ship date of December 30, 2026, and FOB origin terms. The item must be delivered to the DLA Distribution facility at New Cumberland, Pennsylvania, with inspection and acceptance occurring at the destination. Packaging must strictly comply with MIL-STD-2073-1E and RP001 DLA Packaging Requirements, including preservation method 10 (clng/dry:1), unit container E5, outer protective item M, and pack code U. All items must be marked in accordance with MIL-STD-129, including a special marking code of 05 for delicate instruments and a temporary tag affixed to each unit that displays the contract number, NSN, manufacturer’s part number, and rated accuracy, if available. Mercury and mercury-containing compounds are strictly prohibited in the product, packaging, preservation, and marking, except for functional uses in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or chemical analysis reagents specified by NAVSEA; in such cases, portable devices must include a second boundary of containment as per NAVSEA 5100-003D. Sampling and quality acceptance follow MIL-STD-1916 or ASQ H1331 Table 1, using zero non-conformances unless otherwise specified, with critical, major, and minor attributes assigned AQLs of 0.1, 1.0, and 4.0 respectively. Technical and quality requirements referenced by R or I numbers are drawn from the DLA Master List of Technical and Quality Requirements. The contractor must comply with cybersecurity and safeguarding provisions including 252.204-7012 and 252.240-7997, and must use Wide Area WorkFlow (WAWF) for invoicing. Contract clauses cover payment, changes, inspection, default, safeguarding of information, and prohibition of unauthorized obligations, with

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

METER, FLOW RATE INDThe contract pertains to the procurement of one flow rate indicator meter with NSN 6680-01-398-1885 under solicitation SPE4A6-26-T-06ZQ, issued by the ASC Commodities Division of the Department of Defense for delivery to Whiteman Air Force Base, Missouri. Delivery is required within 20 days after award, with FOB origin terms placing responsibility on the contractor for packaging, labeling, and transportation to the point of origin, where title and risk transfer to the government. The contract mandates strict compliance with the DLA Master List of Technical and Quality Requirements, which override applicable industry standards like ASTM D3951 where conflicts arise. Packaging and marking must adhere to MIL-STD-129, including barcoding, hazard labeling per OSHA’s Hazard Communication Standard, and adherence to RP001 for DLA-specific packaging. Inspection and acceptance occur at the destination, with sampling governed by MIL-STD-1916 or ASQ H1331 Table 1, requiring zero non-conformances for acceptance unless otherwise specified, and assigning verification levels of VII, IV, and II to critical, major, and minor attributes respectively. The supplier must comply with DFARS and FAR clause deviations effective February 2026, including cybersecurity requirements under NIST SP 800-171, prohibitions on covered defense telecommunications, hazardous material reporting, and restrictions on hexavalent chromium. Electronic invoicing through Wide Area Workflow (WAWF) is mandatory, and all subcontracting activity for commercial products or services must follow deviation-included clauses. Offerors must provide valid UEI and CAGE codes and affirm representations regarding small business status, socioeconomic eligibility, and compliance with trafficking, employment eligibility, and sustainable product requirements. All proposals must be submitted electronically via DIBBS by the deadline specified, in alignment with the DLA Master Solicitation Revision 105, and must include completed representations, certifications, and technical documentation. The contract includes no options, extended pricing, or defined contract value beyond the single line item at $1.000, and administrative details such as payment office, COR, or DoDAAC will be finalized upon award.

ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 3 days

AI Contract Overview

The Government of Canada, through Public Works and Government Services Canada on behalf of Measurement Canada, is seeking proposals for the acquisition of a Liquified Gas Meter Testing and Proving Trailer to be delivered and installed in Quebec, excluding the National Capital Region. The solicitation, identified as WS5528576662 under contract number U6318-266961, is classified under NAICS code 334519 and was posted on May 19, 2026, with a mandatory response deadline of May 12, 2026, at 2:00 PM Eastern Time. The trailer must fully comply with the detailed technical and operational requirements outlined in the Annex Statement of Requirement, ensuring it meets federal standards for accurate and reliable testing of liquefied gas meters in the field. All aspects including design, construction, transportation, installation, and commissioning are included in the scope of work. The contract is open to all eligible suppliers without set-aside provisions and is managed by the Department of Public Works and Government Services. Points of contact for inquiries and submissions are directed to Lisa-Marie Julien of SPAC/PSPC, reachable via email at lisa-marie.julien@tpsgc-pwgsc.gc.ca. The delivery location is specified as Quebec, with no provision for performance in the National Capital Region. All proposals must adhere strictly to the stated deadlines and technical specifications to be considered valid, and successful bidders will be expected to ensure the trailer is fully operational and certified upon installation.

General Info

Government seeks proposals for liquefied gas meter testing trailer delivery and installation in Quebec.

Agency

Government of Canada → Department of Public Works and Government ServicesView Agency

NAICS

334519 - Other Measuring and Controlling Device ManufacturingView NAICS

Place of Performance

*Quebec (except NCR), CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedApr 20

Solicitation

Response DeadlineMay 12

Deadline has passed

Submission Closed

05/12/2026, 02:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGovernment of Canada → Department of Public Works and Government Services

Contacts1 person available

OfficeN/A

Organization / Agency

Government of Canada → Department of Public Works and Government Services

View Agency Profile

Office AddressN/A

Contacts

Julien Lisa-Marie (SPAC/PSPC) (elle-la / she-herPoint of Contact

contact@example.gov

Full Description

PWGSC, on behalf of Measurement Canada, is issuing this request of proposal (RFP) for the acquisition of Liquified Gas Meter Testing and Proving Trailer including delivery and installation located in Quebec, Quebec, as detailed in Annex - Statement of Requirement.