This Sources Sought opportunity from Department Of Homeland Security was posted on September 16, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

USCGC HEALY Replacement Hangar Doors

Closed

70Z08526SSNHEALYDOORSFederal

Submission Closed09/30/2026, 08:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # SPE8E6-27-Q-0074

Solicitation SPE8E6-27-Q-0074 is a small business set-aside, firm-fixed-price contract issued by the Defense Logistics Agency Troop Support Construction and Equipment for the procurement of two roller curtain doors, part number 5670-01-434-9035. The items must be delivered within 60 days after receipt of the order to the US Army 0215 CS BN CO A at Fort Hood, Texas. Shipping must be executed via the fastest traceable means, and the use of parcel post is strictly prohibited. Inspection and acceptance will occur at the destination, with FOB terms specified as origin. The contractor must adhere to strict packaging and marking standards, including ASTM D3951 and MIL-STD-129, with palletization following DLA requirement RP001. Technical and quality requirements are governed by the DLA Master List, which takes precedence over ASTM standards. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and receiving reports. The contract also incorporates various FAR and DFARS clauses regarding cybersecurity, safeguarding covered defense information, and prohibitions on certain foreign telecommunications equipment.

Defense Logistics Agency

POSTED

DEADLINE

Exterior Metal Door ReplacementThis subcontract for the Brookland-Lakeview Empowerment Center involves the replacement of four existing wooden exterior doors with secure metal door assemblies. The scope of work includes the installation of compatible frames, hinges, locks, closers, thresholds, and weatherstripping, as well as the application of necessary corrosion protection and finish coatings. The contractor is responsible for verifying proper alignment and emergency egress to ensure the facility meets safety standards. The final deliverables consist of four fully installed and tested secure exterior metal doors, complete with keys and detailed hardware schedules. This project is categorized under NAICS code 332321, with a response deadline set for November 16, 2026.

Brookland-lakeview Empowerment Center

POSTED

DEADLINE

Supply of thermally broken curtain wall, flush glaze and entrance door systems at Birch Cliff PS and Birchmount Park CI.

Solicitation # DK27-060P

The Toronto District School Board is soliciting bids for the supply and delivery of thermally broken curtain wall, flush glaze, and entrance door systems for Birch Cliff PS and Birchmount Park CI. While the supplier is responsible for providing the assembled products and necessary technical documentation, the installation will be handled by the TDSB. The evaluation process is conducted separately for each location, with a scoring weight of 90 percent for pricing and 10 percent for BOA Advantage. Interested parties must submit their responses by November 16, 2026, and all inquiries must be managed through the Bids and Tenders platform, with official answers provided via written addenda.

Toronto District School Board

POSTED

DEADLINE

Timber Communal Door Supply & InstallationThis subcontract agreement involves the supply and installation of timber communal door systems for prime contractors working on Procurement for Housing projects. The scope of work is comprehensive, encompassing initial site surveys, design, fabrication, installation, and commissioning, as well as the provision of ongoing maintenance for both door frames and leaves. All deliverables must adhere to CPV standards 45421100 and 44221200 to ensure fully commissioned systems. The opportunity was posted on October 30, 2026, with a response deadline set for December 14, 2026. Classified under NAICS code 332321, the contract is managed by Procurement for Housing and focuses on the delivery of high-quality timber door solutions tailored to the specific requirements of their housing projects.

Procurement for Housing

POSTED

DEADLINE

Stainless Steel Communal Door Supply & InstallationThis subcontract agreement involves the supply and installation of stainless steel communal door systems for prime contractors working on Procurement for Housing projects. The scope of work is comprehensive, encompassing initial site surveys, design, fabrication, installation, commissioning, and the provision of ongoing maintenance for both door frames and leaves. All deliverables must adhere to CPV 45421100 and 44221200 standards to ensure fully operational and compliant installations. The opportunity was posted on October 30, 2026, with a response deadline set for December 14, 2026. Classified under NAICS code 332321, the contract focuses on delivering complete, commissioned door systems tailored to the specific requirements of the agency. Interested parties can find further details through the official tender notice provided by Procurement for Housing.

Procurement for Housing

POSTED

DEADLINE

Steel Communal Door Supply & InstallationThis subcontract agreement involves the supply and installation of steel communal door systems for prime contractors working on Procurement for Housing projects. The scope of work is comprehensive, encompassing initial site surveys, design, fabrication, installation, and commissioning, as well as the provision of ongoing maintenance for both door frames and leaves. All deliverables must adhere to CPV standards 45421100 and 44221200 to ensure fully commissioned and compliant installations. The procurement process is managed by Procurement for Housing, with the solicitation posted on October 30, 2026. Interested parties must submit their responses by the deadline of December 14, 2026, at 09:00 UTC. The contract is categorized under NAICS code 332321, focusing on the specialized manufacturing and installation of these steel door systems.

Procurement for Housing

POSTED

DEADLINE

Aluminium Communal Door Supply & InstallationThis subcontract agreement focuses on the supply and installation of aluminium communal door systems for prime contractors working on Procurement for Housing projects. The scope of work is comprehensive, encompassing initial site surveys, design, fabrication, installation, and commissioning, as well as the provision of ongoing maintenance for both door frames and leaves. All deliverables must adhere to CPV standards 45421100 and 44221200 to ensure fully commissioned and compliant installations. The procurement process is managed by Procurement for Housing, with a response deadline set for December 14, 2026. Classified under NAICS code 332321, the contract requires a specialized provider capable of delivering end-to-end door system solutions. Interested parties can find further details via the official tender notice provided by the agency.

Procurement for Housing

POSTED

DEADLINE

Communal Doors and Door Entry Systems

Solicitation # CDDES/2026

Procurement for Housing is establishing a multi-lot framework under solicitation CDDES/2026 for the survey, design, supply, installation, commissioning, handover, and maintenance of communal doors and door entry access systems across England, Wales, Scotland, and Northern Ireland. The scope includes aluminium, steel, stainless steel, and timber communal doors, as well as wired and non-wired audio/video door entry systems, specifically excluding fire doors and individual house front doors. The framework is structured into nine lots, divided between manufacturers only (Lots 1-4), contractors only (Lots 5-8), and a dedicated lot for door entry systems (Lot 9). The estimated total value of the framework is 80 million GBP excluding VAT, with individual lot values estimated at 9 million GBP for doors and 8 million GBP for entry systems. The framework will be awarded for an initial period of two years with two optional one-year extensions. Awards are based on a weighted criteria of 70 percent quality and 30 percent price. Successful suppliers will be subject to a framework management fee of 2.60 percent of the net invoice value. Call-off contracts may be executed via direct award or competitive selection processes in accordance with PA23, with each member entering into a direct contractual relationship with the supplier. The tender submission deadline is December 14, 2026, at 9:00am.

Procurement for Housing

POSTED

DEADLINE

Automatic Sliding Door Installation & IntegrationThis subcontract involves the installation and integration of exterior automatic vestibule door systems at SUNY Stony Brook University Hospital. The scope of work requires the removal of existing automatic sliding doors, frames, and thresholds, followed by the installation of new automatic sliding door systems specifically at Vestibules T1009 and T1023. The contractor is responsible for delivering fully operational and commissioned systems while strictly adhering to Infection Control Risk Assessment protocols to maintain safety within the hospital environment. The project is managed under the State University of New York and falls under NAICS code 332321. Interested parties must note the response deadline of December 8, 2026. The selected subcontractor will work under prime contractors to ensure all installations meet the technical and safety requirements of the healthcare facility.

State University of New York (SUNY)

POSTED

DEADLINE

Solicitation # SPE7M1-27-Q-0146

Solicitation SPE7M1-27-Q-0146 is a small business set-aside request for a single marine window, identified as part number KS-25673-C-24 and NSN 2040-01-279-9916. This critical application item is being procured by the DLA Weapons Support Maritime Supply Chain under firm fixed price terms. The required delivery date is December 22, 2025, with a delivery timeframe of five days after receipt of order. Shipping is FOB origin, and the destination for both inspection and acceptance is the DLA Distribution Norfolk RMC Project in Norfolk, Virginia. The contractor must adhere to strict technical and environmental standards, including the prohibition of Class I ozone-depleting substances and the intentional addition of mercury, except where specified by NAVSEA. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements RP001. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system. Quotations must be submitted by November 12, 2026, and remain valid for 90 days.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # N0040627Q0008

Navsup Fleet Logistics Center Puget Sound is soliciting a firm fixed price contract for the procurement of one raised watertight quick-acting hatch assembly, specifically Hatch No. 1-108-2, for use on Mine Countermeasure Class (MCM1CL) ships. The hatch must feature a 24 by 24 inch clear opening, a 17 inch coaming height, and a design pressure of 5 PSI. Technical specifications require the use of aluminum and CRES materials, a specific orange silicone gasket, and a magnetic permeability of 2.0 or less. The assembly must be powder coated Haze Gray, except for the bare metal coaming. This is a total small business set-aside under NAICS code 332321, with an anticipated award date in November 2026 and a delivery deadline of December 18, 2026, to the USN SRF-JRMC in Sasebo, Japan. The government will select the most advantageous offer based on technical factors including delivery date, price, and past performance. Offerors must be registered in the System for Award Management and provide detailed manufacturer information, including the country of origin for the item. Packaging and marking must adhere to ASTM-D-3951 and MIL-STD-130 for unique item identification of components costing $5,000 or more. Invoicing and payment will be processed electronically through Wide Area WorkFlow. While NAVSUP WSS Transportation is provided at no cost, contractors are responsible for including all other applicable tariffs, duties, or taxes in their proposal.

Navsup Flt Logistics Ctr Puget Sound

POSTED

DEADLINE

Doors and Windows InstallationThis subcontract opportunity is for the installation of windows and doors for facility projects managed by Warren Consolidated Schools in Warren, Michigan. The selected qualified installation trade will be responsible for delivering and sealing window and door assemblies in strict accordance with the designs provided by the owner, working as a subcontractor for prime contractors. The solicitation was posted on October 29, 2026, with a response deadline of November 5, 2026. This project falls under NAICS code 332321 and requires a specialized trade capable of executing the full installation and sealing process to ensure the integrity of the building openings.

Warren Consolidated Schools

POSTED

5 days ago

DEADLINE

in 3 days

AI Contract Overview

The United States Coast Guard issued Request for Information 70Z08526SSNHEALYDOORS to identify capable manufacturers for a pair of replacement hangar doors, tracks, and operators for the USCGC HEALY. The required system must completely fill a 17 foot by 18 foot opening, accommodate the transit of an H-60 helicopter with folding rotor and tail variants, and be capable of operating in Arctic conditions. Technical requirements include compliance with NAVAIR Certification and MIL-DTL-24151 Type 1 Class 1 standards, with specific exceptions noted for sections 3.4.2.5, 3.4.2.6, and 3.4.2.11. Interested respondents must provide details on their engineering and manufacturing capabilities, including a history of similar doors produced within the last five years, proposed materials for slats and tracks, operator specifications, and methods for sealing against light and water. While the supplier is not responsible for the actual installation, they must provide technical representatives capable of traveling within the Continental United States to offer installation assistance. Responses must be submitted in PDF format to the designated points of contact by September 30, 2026. This RFI is for market research and planning purposes under FAR Part 10 and does not constitute a formal request for proposal or a guarantee of future procurement.

General Info

USCG seeks manufacturers for Arctic-capable hangar doors for the USCGC HEALY.

Agency

Department Of Homeland Security → Sflc Procurement Branch 2(00085)

NAICS

332321 - Metal Window and Door Manufacturing

Place of Performance

Seattle, WA, USA

Set-Aside

NONE

Documents

rfi

Low

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedSep 16

Sources Sought

Response DeadlineSep 30

Deadline has passed

Submission Closed

09/30/2026, 08:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Homeland Security → Sflc Procurement Branch 2(00085)

Contacts2 people available

OfficeALAMEDA, CA, 94501, USA

Organization / AgencyDepartment Of Homeland Security → Sflc Procurement Branch 2(00085)

Office AddressALAMEDA, CA, 94501, USA

Contacts

Robin B. Kloeppel

Corry Thomas

Full Description

REQUEST FOR INFORMATION (RFI)

USCGC HEALY Replacement Hangar Doors

DESCRIPTION

This notice is a Request for Information (RFI) only. This RFI is issued by the United States

Coast Guard (USCG) for information and planning purposes, pursuant to Federal Acquisition

Regulation (FAR) Part 10, Market Research. It does not constitute a Request for Proposal (RFP)

or a promise to issue an RFP in the future. All participants are advised that the Government will

not pay for any information or administrative costs that result from responding to this RFI; all

costs associated with responding to this RFI will be at the interested party’s expense. Not

responding to this RFI does not preclude participation in any future RFP, if any is issued.

2.0 PURPOSE

The purpose of this RFI is to increase the USCG’s understanding of companies that can manufacture a pair of replacement hangar doors along with their associated tracks and operator for the USCGC HEALY. The hangar door system shall have the following characteristics:

Completely fill the existing 17’-0” (x) x 18’-0” (H) hangar opening.
Accommodate the transit of an H-60 helicopter (folding rotor and tail variant) with no obstructions or interferences
Meet the requirements of a Type 1 Class 1 door in MIL-DTL-24151 with the following exceptions:
- 3.4.2.5, 3.4.2.6, 3.4.2.11
Operate in Arctic conditions
Comply with NAVAIR Certification.

REFER TO THE ATTACHMENT FOR FULL DETAILS ON THIS REQUEST FOR INFORMATION.