USCGC KATHERINE WALKER DRY DOCK FY16

SOURCES SOUGHT NOTICE: DRY DOCK REPAIRS USCGC KATHERINE WALKER. This SOURCES SOUGHT NOTICE is for market research purposes only and does not constitute a Request for Proposal/Quotation; and, it is not considered to be a commitment by the Government to award a contract nor will the Government pay for any information provided; no basis for claim against the Government shall arise as a result from a response to this Sources Sought Notice or Government use of any information provided. Pursuant to FAR Part 10 (Market Research), the purpose of this notice is to: (1) Determine if sources capable of satisfying the agency's requirements exists. (2) Determine if commercial items suitable to meet the agency's needs are available or could be modified to meet the agency's requirements. (3) Determine the commercial practices of company's engaged in providing the needed service or supply. Pursuant to FAR Part 6 and FAR Part 19, competition and set-aside decisions may be based on the results of this market research. This notice in no way obligates the Government to any further action. REQUIREMENT: This notice is issued by the U.S. Coast Guard, Surface Force Logistics Center, Norfolk, VA to identify sources capable of providing the following: Contractor shall provide all necessary facilities, materials, equipment, and personnel to DRYDOCK repairs to the USCGC KATHERINE WALKER. The USCGC KATERINE WALKER'S is home ported in BAYONNE, NJ. SCOPE OF WORK: The scope of the acquisition is for the DRYDOCK repairs of the USCGC KATHERINE WALKER. This work will include, but is not limited to the following work items: WORK ITEM 1: Hull Plating (U/W Body), Inspect WORK ITEM 2: Hull Plating (U/W Body), Ultrasonic Testing WORK ITEM 3: Hull and Structural Plating (General) -10.2-Pound Steel, Repair WORK ITEM 4: Hull and Structural Plating (General) - 12.75-Pound Steel Plate, Repair WORK ITEM 5: Hull and Structural Plating (General) - 15.3-Pound Steel Plate, Repair WORK ITEM 6: Hull and Structural Plating (General) - 20.5-Pound Steel Plate, Repair WORK ITEM 7: Hull and Structural Plating (General) - 7.5-Pound (3/16") Steel Plate, Repair WORK ITEM 8: Hull and Structural Plating (General) - 7.65-Pound Steel Plate, Repair WORK ITEM 9: Appendages (U/W), Leak Test WORK ITEM 10: Appendages (U/W) - Internal, Preserve WORK ITEM 11: Chain Locker(s), Clean and Inspect WORK ITEM 12: Tanks (MP Fuel Stowage and Overflow), Clean and Inspect WORK ITEM 13: Voids (Non-Accessible), Leak Test WORK ITEM 14: Voids (Non-Accessible), Internal Surfaces, Preserve WORK ITEM 15: Tanks (MP Fuel Service), Clean and Inspect WORK ITEM 16: Tanks (Hydraulic Oil Stowage and Service), Clean and Inspect WORK ITEM 17: Tanks (Potable Water), Clean and Inspect WORK ITEM 18: Tanks (Lube Oil), Clean and Inspect WORK ITEM 19: Tanks (Ballast), Clean and Inspect WORK ITEM 20: Tanks (Dirty Oil and Waste), Clean and Inspect WORK ITEM 21: Z-Drive Propulsion Units, Overhaul WORK ITEM 22: SW Heat Exchangers, Clean, Inspect and Hydro WORK ITEM 23: Circuit Breakers (60 Hz), Inspect and Test WORK ITEM 24: Fathometer Transducer, Renew WORK ITEM 25: Underwater (Speed) Log Transducer(s), Renew WORK ITEM 26: Sea Strainers - Duplex (All Sizes), Overhaul WORK ITEM 27: Sea Bay, Clean and Inspect WORK ITEM 28: Sea Bay, Preserve 100% WORK ITEM 29: Compressed Air Receivers and System Valves (All), Clean, Inspect, Hydro and Lift WORK ITEM 30: Thruster Unit (General), Overhaul WORK ITEM 31: Hydraulic Chain Stoppers, Inspect And Service WORK ITEM 32: Hydraulic Crossdeck Winches, Inspect and Service WORK ITEM 33: Hydraulic Inhaul Winch, Inspect and Service WORK ITEM 34: Mechanical Chain Stoppers, Inspect and Service WORK ITEM 35: Anchor Windlass, Inspect And Service WORK ITEM 36: Anchor Chain(s) and Ground Tackle, Inspect and Repair WORK ITEM 37: Warping Capstan (Aft), Inspect and Service WORK ITEM 38: Single Point Davit, Inspect and Service WORK ITEM 39: Buoy Crane, Inspect And Service WORK ITEM 40: Tanks (Ballast), Preserve "100%" WORK ITEM 41: Tanks (Ballast), Preserve "Partial" WORK ITEM 42: Chain Locker, Preserve 100% WORK ITEM 43: Chain Locker, Preserve - Partial WORK ITEM 44: Tanks (Dirty Oil and Waste), Preserve "100%" WORK ITEM 45: Tanks (Dirty Oil and Waste), Preserve "Partial" WORK ITEM 46: Tanks (Grey Water Holding), Preserve "100%" WORK ITEM 47: Tanks (Potable Water), Preserve "100%" WORK ITEM 48: Tanks (Potable Water), Preserve "Partial" WORK ITEM 49: Decks - Exterior (Buoy or Construction Deck), Preserve 100% WORK ITEM 50: U/W Body, Preserve (100%) WORK ITEM 51: Hull Plating Freeboard, Preserve "100%" WORK ITEM 52: Superstructure, Preserve "100%" WORK ITEM 53: Cathodic Protection / Zinc Anodes, Renew WORK ITEM 54: Drydock WORK ITEM 55: Temporary Services, Provide - Cutter WORK ITEM 56: Sea Trial Performance, Support, Provide WORK ITEM 57: Watertight Hatches 1-50-1 and 01-89-2, Upgrade WORK ITEM 58: Bilges, Preserve WORK ITEM 59: Buoy Deck Cleats, Modify WORK ITEM 60: Power Assisted Griping System, Remove WORK ITEM 61: Buoy Crane Main Winch, CT Function, Remove WORK ITEM 62: Hydraulically Operated Cargo Hatch, Inspect and Service WORK ITEM 63: Potable Water Pneumatic Tank(s), Clean and Inspect WORK ITEM 64: Potable Water System Relief Valve, Overhaul or Renew WORK ITEM 65: Grey Water Piping, Clean and Flush WORK ITEM 66: Cargo Hatch Gasket, Renew WORK ITEM 68: Bridge and Crane Control Room Window Renew WORK ITEM 69: Weathertight Doors, Renew WORK ITEM 70: CPO Berthing Bulkhead Paneling, Renew WORK ITEM 71: Stanchion Inserts and/or Covers , Renew WORK ITEM 72: Buoy Deck Gunwales, Preserve WORK ITEM 73: Towing Bitts, Chocks, and Fairleads, Preserve Anticipated Period of Performance: The period of performance is anticipated to be for SEVENTY (70) calendar days with a start date of 29 June 2016 -07 September (Subject to change) NAICS Code/Size Standard: The applicable NAICS Code is 336611, Ship Building and Repairing and the size standard is 1,000 employees. Submission of Information: Companies having capabilities necessary to meet or exceed the stated requirements are invited to provide information to contribute to this market survey/sources sought notice including commercial market information and company information. **Companies may respond to this Sources Sought Notice via e-mail to: contact@example.gov or via fax to +1 (555) 000-0000 (Attn: Sandra Martinez/C&P2-IBCT) no later than 04 January 2016 at 11:00AM, Eastern Time. **Please provide the following information/documentation: 1. Name of Company, Address and DUNS Number. 2. Point of Contact and Phone Number. 3. Business Size applicable to the NAICS Code: 8(a) Small Business Concern, HubZone Small Business Concern, Service-Disabled Veteran Owned Small Business Concern (SDVOSBC) or a Small Business Concern. 4. Documentation Verifying Small Business Certification. 5. Statement of Proposal Submission: Statement on how your company will do the work and that your company WILL submit a proposal as a prime contractor if a solicitation is issued as a result of this Sources Sought Notice. 6. Past Performance Information: Evidence of experience in work similar in type and scope to include contract numbers, project titles, and dollar amounts, points of contact and telephone numbers. If two companies are planning to conduct business as a Joint Venture or any other type of teaming agreement, they shall provide past performance on projects of similar scope that they have performed together as a Joint Venture. Providing individual past performance documentation from each company on separate projects where the two did not work together is not considered to be sufficient past performance. A Joint Venture that cannot provide this requested information will not be considered to have sufficient documentation needed to evaluate past performance as an evaluation factor. Interested parties should register in the System for Award Management (SAM) which replaced the Central Contractor Registration (CCR) as prescribed in FAR Clause 52.232-33. SAM can be obtained by accessing the internet at www.sam.gov. Failure to submit sufficient detailed information may result in considering a company as not a viable source and may influence competition and set-aside decisions. Regardless of the information obtained from this Sources Sought Notice, the Government reserves the right to consider any arrangement as deemed appropriated for this requirement. Respondents are advised that the Government is under no obligation to acknowledge receipt of the information received or provide feedback to respondents with respect to any information submitted. No proprietary, classified, confidential, or sensitive information should be included in your response to this Sources Sought Notice. The Government reserves the right to use any information provided by respondents for any purpose deemed necessary and legally appropriate, including using technical information provided by respondents in any resultant solicitation. After a review of the responses received from this notice, a pre-solicitation notice and solicitation may be published on Federal Business Opportunities (FedBizOpps) website. It is the potential offeror's responsibility to monitor FedBizOpps for release of any future solicitation that may result from this Sources Sought Notice. However, responses to this Sources Sought Notice will not be considered adequate responses to any resultant solicitation.