USCGC KATMAI BAY

The United States Coast Guard Surfaces Force Logistic Center, intends to issue a Commercial Request for Quote (RFQ) for DRYDOCK Repairs to the USCGC KATMAI BAY. The acquisition will be solicited as a Total Small Business Set-Aside. The Coast Guard intends to conduct the procurement in accordance with Federal Acquisition Regulation FAR Part 12, Acquisition of Commercial Items, and FAR Subpart 13.5, Test Program for Certain Commercial Items. The simplified acquisition will be issued as a Best Value, Request for Quote (RFQ), on or about February 18, 2015. The solicitation will be issued electronically on the FEDBIZOPPS web page at http://www.fedbizopps.gov. It is incumbent upon contractors to monitor the FEDBIZOPS web page for RFQ release and all subsequent amendments. Please sign up for the Auto Notification service to receive e-mail from FEDBIZOPPS when an action is taken under this solicitation. If you have questions regarding FEDBIZOPPS, contact Sandra Martinez at +1 (555) 000-0000 or email contact@example.gov. Hard copies of the specification and solicitation will not be issued. A CD-ROM containing all applicable drawings will be sent via U.S. mail, if requested. Send all requests via e-mail contact@example.gov. Contractor shall provide all necessary facilities, materials, equipment, and personnel to DRYDOCK repairs to the USCGC KATMAI BAY. The USCGC KATMAI BAY is home ported in Sault Ste. Marie, MI. Geographic Restriction: Restricted to the Great Lake Area. SCOPE OF WORK: The scope of the acquisition is for the DRYDOCK repairs of the USCGC KATMAI BAY. This work will include, but is not limited to the following work items: Hull Plating (U/W Body), Inspect Hull Plating (U/W Body), Ultrasonic Testing Bubbler Channels, Inspect Appendages (U/W), Leak Test Appendages (U/W) - Internal, Preserve Voids (Non-Accessible), Leak Test Voids (Non-Accessible), Internal Surfaces, Preserve Propulsion Shafting, Remove, Inspect, and Reinstall Propulsion Shaft Seals, Overhaul Propulsion Shaft Bearings (External), Check Clearances Propeller, Remove, Inspect, and Reinstall Fathometer Transducer, Renew Vent Ducts (Engine and Motor Room All), Commercial Cleaning Vent Ducts (Galley and Pantry Room All), Commercial Cleaning Vent Ducts (All Other), Commercial Cleaning Sea Valves and Waster Pieces, Overhaul or Renew Compressed Air Receivers and System Valves (All), Clean, Inspect, Hydro and Lift Rudder Assembly; Remove, Inspect and Reinstall Anchor Windlass, Level 2 Inspect and Repair Grey Water Holding Tank(s), Clean and Inspect Tanks (Grey Water Holding), Preserve "Partial" U/W Body, Preserve (100%) U/W Body, Preserve (Partial - Condition A) U/W Body, Preserve (Partial - Condition B) Hull Plating Freeboard, Preserve "100%" Cathodic Protection / Zinc Anodes, Renew - ASSET Drydocking - Tender Temporary Services, Provide - Tender Sea Trial Performance, Support, Provide Lead-Based Paint, Perform 100% Abatement Lead-Based Paint, Perform Partial Abatement Fixed Ballast (Lead Ingots), Encapsulate Vent Ducts (Laundry Exhaust), Commercial Cleaning Fuel Valves, Overhaul or Renew Fuel Manifold, Overhaul Rudder Stock Bearings (Upper and Lower), Renew Superstructure, Preserve "100%" Watertight Doors and Scuttles (External), Renew Deck Gear, Shrink Wrap Auxiliary Sea Water System Valves, Overhaul Or Renew Fuel Manifold, Overhaul Boat Davit Winch, Shrink Wrap Lead Dust, Clean {Type System Name} Pump(s), Overhaul Machinery Exhaust Stack Insulation, Renew Steering Hydraulic Cylinders (Rams), Overhaul (AFC-45) Relocate and Renew Bos'n Hole Ladder Renew Galley Supply Fan Install Vent in Deck Locker Install Steering System Gauges Renew Aft Engineroom Padeye Load Test Interior Padeyes (All) Main Propulsion Motors - Commercial Clean Main Propulsion Generators - Commercial Clean Renew (4) Deckhouse Screen Doors Composite Labor Rate GFP Report Laydays Anticipated Period of Performance: The period of performance is anticipated to be for FIFTY (50) calendar days with a start date of 08 JULY 2015 through 26 AUGUST 2015 (Subject to change at the discretion of the Government). NAICS Code/Size Standard: The applicable NAICS Code is 336611, Ship Building and Repairing and the size standard is 1,000 employees. All welding and brazing shall be accomplished by trained welders who have been certified by the applicable regulatory code performance qualification procedures. This solicitation is Subject to Availability of Funds. All responsible sources may submit an offer, which shall be considered by the United States Coast Guard. For information concerning this acquisition contact the Contracting Official listed above