This Sources Sought opportunity from Department Of Homeland Security was posted on November 6, 2014. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

USCGC Polar Star Drydock FY15

Closed

HSCG85-15-S-PSDD15Federal

Submission Closed11/19/2014, 10:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336611

New

SLED

F&W, 2018 Munson Packman Boat Repower project

Solicitation # 2018 Munson Packman Boat Repower

The Confederated Tribes of the Colville Reservation Fish and Wildlife Department is seeking a factory-certified marine contractor to perform a complete propulsion repower and helm system integration for a 30 foot Munson Packman landing craft. The project involves a six-phase process including the decommissioning and removal of two existing Honda BF250A outboard engines, a structural assessment of the transom, and the installation of two new Honda BF250D Drive-by-Wire outboards. Key technical requirements include the integration of dual-station Honda iST electronic control heads, updating the fuel system with USCG Type A1-15 lines, and interfacing the propulsion system with the existing NMEA 2000 backbone and SeaStar PA1315-2 Power Assist steering unit. The contractor must be an authorized Honda Marine Dealer or Service Center to ensure factory warranty coverage and must provide a secure facility for vessel storage. Final acceptance is contingent upon successful pre-flight diagnostics and a minimum two-hour sea trial to validate wide open throttle performance, steering responsiveness, and control handoff protocols. Proposals are due by November 13, 2026, and will be evaluated based on a 100-point scale considering technical capability and budget, with a preference for responsible Indian Offerors. Awarded contracts require either a 25 percent retainage or a performance bond, with a bond being mandatory for contracts exceeding 100,000 dollars. All payments are subject to the tribal appropriation process and the availability of funds in the tribal treasury.

Confederated Tribes of the Colville Reservation

POSTED

DEADLINE

ASCB System and Vessel Inspection & MaintenanceThe ASCB System and Vessel Inspection and Maintenance subcontract involves providing routine sustainment, quarterly inspections, and minor repairs for prime contractors supporting Navy Region Mid-Atlantic projects. The scope of work includes maintaining barrier systems, cleaning A/C simplex strainers, lubricating hatch covers, and inspecting engine belts in accordance with manufacturer technical manuals. Additionally, the contractor is responsible for the towing and control of PSB strings during refurbishment processes. Managed under the Department of Defense via the Navsup Fleet Logistics Center Norfolk, this requirement demands high technical proficiency in marine diesel engines. The successful contractor must deliver functional systems and detailed quarterly inspection reports. The performance of these services is centered in the 23511 zip code area, with a response deadline set for November 16, 2026.

Navsup Flt Logistics Ctr Norfolk

POSTED

DEADLINE

Shipboard Structural and Hull Repair

POSTED

DEADLINE

Portable Light Tower Rental and Field SupportThis small business set-aside subcontract involves the rental and field support of diesel-powered portable light towers for prime contractors at the Portsmouth Naval Shipyard. The required equipment must be towable units featuring 4,000W output, adjustable masts between 20 and 30 feet, and integrated forklift pockets. The contractor is responsible for delivering operational towers along with necessary manuals and ensuring all padeyes have the required lifting and handling certifications. Operational support includes on-site technical assistance with a strict 24-hour response time and a 48-hour window for completing repairs. Due to the nature of the work location, all personnel must hold US Citizenship to gain access to the shipyard. This opportunity is categorized under NAICS code 336611 and is managed under the Department of Defense.

Portsmouth Naval Shipyard Gf

POSTED

DEADLINE

HTFW PUMP Parts for STBD 1

Solicitation # N0040627Q0019

Naval Supply Systems Fleet Logistics Center Puget Sound, acting on behalf of Military Sealift Command, is soliciting the procurement of critical pump parts for the MIGUEL KEITH (ESB-5) under solicitation N0040627Q0019. The requirement consists of four ball bearings (PN 204-11-629), three mechanical seals (PN 231-31-1770), and two casing rings (PN 15489-16-27). This is a firm fixed price procurement being sole sourced to ECI Defense Group, the authorized distributor for the original equipment manufacturer, Buffalo Pumps dba Air and Liquid Systems Corporation. The parts are designated as critical safety items, and the use of non-qualified sources could void equipment warranties. The government will evaluate offers based on technical specifications, including the delivery date, past performance, and price. The contractor must adhere to strict packaging and marking standards, including MIL-STD 129R for external markings and ISPM 15 for wood crating. Additionally, the mechanical seals and casing rings require DoD unique identification per DFARS 252.211-7003. Invoicing and payment must be processed electronically through the Wide Area WorkFlow (WAWF) system. The procurement is categorized under NAICS code 336611, with an anticipated award date in November 2026.

Navsup Flt Logistics Ctr Puget Sound

POSTED

DEADLINE

TSV4 NARR MESSING AND MODERNIZATION

Solicitation # N0018927QL008

Solicitation N0018927QL008 is a firm-fixed-price effort issued by NAVSUP FLT LOG CTR Norfolk for the development of a drawing package and Bill of Materials (BOM) to support habitability upgrades aboard the TSV4 Narragansett. The scope of work focuses on the assessment and documentation of messing, berthing, stateroom, and sanitary spaces at Joint Expeditionary Base Little Creek-Fort Story, Virginia. This is a professional services contract limited to engineering and planning; it specifically excludes the procurement, fabrication, or installation of any shipboard components. The project is 100 percent set aside for Small Business and Service-Disabled Veteran-Owned Small Businesses under NAICS code 336611. Key deliverables include an electronic draft drawing package and BOM due 40 calendar days after award, with final electronic files and two full-size paper copies due within 61 calendar days. The contractor must adhere to several technical standards, including MIL-STD-2003 for electrical installations, MIL-STD-777 for piping components, and NAVSEA General Specifications for Overhaul of Surface Ships. Award is based on best value, requiring a pass on a mandatory ship check at Colonna's Shipyard in Norfolk, VA, and an acceptable technical approach. Failure to attend the mandatory site visit results in disqualification. Payment will be processed electronically via the Wide Area WorkFlow system.

Navsup Flt Logistics Ctr Norfolk

POSTED

DEADLINE

Inspect and Clean Sections of Forward Ventilation System onboard Virginia Class Submarine.

Solicitation # N6278927Q0003

The Department of Defense, through the Supply Of Shipbuilding Groton office in Connecticut, is soliciting a combined contract under solicitation number N6278927Q0003 for the inspection and cleaning of sections of the forward ventilation system onboard a Virginia Class Submarine. This requirement falls under NAICS code 336611. The solicitation was posted on November 4, 2026, with a response deadline of November 13, 2026. Primary and secondary points of contact for this effort are Stephanie Neale and Andrea Cook. Special contract requirements include specific labor and pay mandates. A 4 percent hazard pay differential is applicable for employees in positions representing a low degree of hazard when working near ordnance, explosives, or incendiary materials. Contractors must provide required uniforms at no cost to employees or reimburse them for the actual cost. Additionally, in accordance with Executive Order 13706, employees subject to the Service Contract Act must receive one hour of paid sick leave for every three hours worked, capped at 56 hours per year. Labor classifications for employees not listed in the wage determination must be designated as either Classification A or B based on their responsibility for their own safety.

Supply Of Shipbuilding Groton

POSTED

DEADLINE

Multi Mission Surface Combatant (MMSC) Post Delivery Execution Yard (PDEY)

Solicitation # N6117727R0003

Solicitation N61177-27-R-0003 is for the Multi Mission Surface Combatant (MMSC) Post Delivery Execution Yard (PDEY) contract, managed by Navsea HQ. The objective is to execute post-delivery availabilities for four MMSC ships, with each vessel undergoing a 14-month post-delivery period. The scope of work includes the management and execution of three primary availabilities per ship: the Post Shakedown Availability (PSA), the Industrial Post Delivery Availability (IPDA), and the Continuous Maintenance Availability (CMAV), as well as any concurrent Planned Maintenance Availabilities (PMAVs). Key contractor responsibilities include providing a NAVSEA-certified drydock for PSAs, performing emergent work, and conducting Post Repair Trials (PRT) to ensure system operability. The contract is structured using Cost Plus Award Fee (CPAF) task orders, with a total performance period not to exceed five years. Work for PSAs and IPDAs will be performed at the contractor's facilities, while CMAVs will be executed at Naval Station Mayport. Award evaluation is based on non-cost factors including management capability, facility and production capabilities, and the proposed approach for PSA, IPDA, and CMAV execution. Performance will be measured against weighted objectives for schedule (35%), management (30%), technical (20%), and cost (30%) performance. The solicitation requires strict adherence to quality standards such as ISO 9001:2015 and specific military marking and packaging standards including MIL-STD-130 and MIL-STD-129.

POSTED

DEADLINE

WXPAK, ASSY W/HARDWIRE SENSOR

Solicitation # 70ZU0227Q49002B00

The U.S. Coast Guard intends to award a sole source, fixed-price contract to Campbell Scientific Inc. for 19 WXPAK assemblies with hardwire sensors, identified by NSN 6660-01-470-7062 and part number S1568. This procurement is conducted under FAR 13.106-1(b) because the vendor is the original equipment manufacturer and possesses the proprietary technical expertise required to ensure compatibility and performance. The quote is due by November 17, 2026, with a required delivery date of December 14, 2026. The procurement is categorized under NAICS 336611 and is designated as a total small business set-aside. The contract requires each assembly to be tested and calibrated using factory procedures, with results enclosed in the shipment. Packaging must adhere to ASTM-D5118 standards, utilizing individual cardboard boxes with foam inserts and preservation for a minimum of two years. Marking and bar-coding must comply with ISO/IEC-16388-2007 using Code 39 Symbology. Inspection and acceptance will occur at the destination, where a Coast Guard representative will verify the order's completeness, the absence of transit damage, and adherence to all packaging and marking specifications.

POSTED

DEADLINE

Solicitation # 70ZU0227QIBCT0001

Solicitation 70ZU0227QIBCT0001 is an Indefinite Delivery Requirement Contract (IDR) for the FY27 drydock availability of the USCGC KUKUI (WLB 203), a 225-foot Buoy Tender homeported in Sitka, Alaska. The project involves comprehensive drydock repairs, including extensive preservation of the hull, exterior decks, superstructure, ballast and potable water tanks, and various internal mechanical components. Performance will take place at the contractor's facility from February 2, 2027, to May 18, 2027, with an anticipated award date of January 18, 2027. This requirement is a total small business set-aside under NAICS code 336611, with a size standard of 1,300 employees. The award will be granted to the responsible quoter providing the most advantageous quote, based on a lowest-price technically acceptable basis. Evaluation factors include a pass/fail assessment of technical capability and past performance within the last three years. Contractors must provide a comprehensive execution plan for lodging and messing, facility certifications, and docking calculations in accordance with SFLC Standard Specifications 0740 and 8634. Quotes must be submitted via email by November 23, 2026, and must include a detailed technical proposal separate from the pricing sheet. Order limitations are set with a minimum order of 1,000 dollars and a maximum combination order of 7 million dollars.

POSTED

DEADLINE

Solicitation # N6449827Q5002

The Department of Defense, specifically the NSWC Philadelphia Division, has issued solicitation N6449827Q5002 for a project titled Big Blue Machalts. This procurement falls under NAICS code 336611 and is being managed out of the agency's office located in Philadelphia, Pennsylvania. Interested parties must submit their responses by the deadline of November 19, 2026. For further inquiries or detailed information regarding the requirements, the primary point of contact is Anthony Ricciardi.

Nswc Philadelphia Division

POSTED

DEADLINE

DRYDOCK: USCGC WILLIAM CHADWICK DD FY2027

Solicitation # 70ZU0127PBPLWCHADWICK

The U.S. Coast Guard Surface Forces Logistics Center is issuing a Sources Sought Notice under solicitation number 70ZU0127PBPLWCHADWICK to conduct market research for the drydock repairs of the USCGC WILLIAM CHADWICK (WPC-1150). This is not a formal solicitation, but a request for information to identify capable sources under NAICS code 336611 for ship building and repairing. The anticipated period of performance is 119 calendar days, scheduled to run from June 8, 2027, to October 5, 2027. All work is to be performed at the contractor's facility, and there are no geographical restrictions for the cutter. The scope of work encompasses 25 specific items, including hull plating inspection, propulsion shafting and rudder assembly repair, tank preservation, electrical power distribution thermographic inspection, and sea trial support. Interested companies, including various small business socioeconomic categories, must submit their company identification, business size certification, past performance evidence, and a statement of intent to bid as a prime contractor. Responses must be submitted via email to the designated points of contact by November 17, 2026, at 11:00 am EST.

CG-SEA-C21

POSTED

about 11 hours ago

DEADLINE

in 13 days

General Info

Agency

Department Of Homeland Security → Sflc Procurement Branch 2(00085)

NAICS

336611 - Ship Building and Repairing

Place of Performance

Set-Aside

NONE

Documents

2 pages · specifications

High

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed

PostedNov 6

Sources Sought

Response DeadlineNov 19

Deadline has passed

Submission Closed

11/19/2014, 10:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Homeland Security → Sflc Procurement Branch 2(00085)

Contacts1 person available

OfficeALAMEDA, CA, 94501, USA

Organization / AgencyDepartment Of Homeland Security → Sflc Procurement Branch 2(00085)

Office AddressALAMEDA, CA, 94501, USA

Contacts

Jennifer M. Stock

contact@example.gov

+1 (555) 000-0000

Full Description

This announcement is a Sources Sought Synopsis (market survey). This is not a Request for Quote (RFQ) or a Request for Proposal (RFP). This announcement is for information and planning purposes only and is not a commitment by the Government, implied or otherwise, to issue a solicitation or award a contract. The purpose of this sources sought is to determine interest and capability of potential businesses. The Government may use responses to this sources sought synopsis to make an appropriate acquisition decision for this project. The U.S. Coast Guard Surface Forces Logistics Center is conducting market research for potential qualified contractors that can perform drydock repairs on the USCGC POLAR STAR (WAGB-10). The principal characteristics of the vessel are attached to this notice via a downloadable document. The following is a sampling of work to be performed: Sampling of work to be performed: 1: Production Gantt Bar Chart, Provide, 2: Hull Plating (U/W Body), Ultrasonic Testing, 3: Tanks (Dirty Oil and Waste), Clean and Inspect, 4: Fathometer Transducer, Renew, 5: Allied K280-70 Crane, Level 1 Inspect and Repair, 6: Cathodic Protection / Zinc Anodes, Renew, 7: Drydocking, 8: Sea Trial Performance, Support, Provide, 9: Hull Plating Freeboard, Preserve "100%", 10: Tanks (Lube Oil), Clean and Inspect, 11: Temporary Services, Provide, 12: Towing Bitts, Chocks and Fairleads, Inspect and Test,13: Tanks (Aviation Fuel Service), Clean and Inspect,14: Hull Plating (U/W Body), Inspect, 15: Propeller Removal and Reinstallation16: Propulsion Shaft Seal, Clean, Inspect, and Overhaul, 16: Shaft Handling Equipment, Preventative Maintenance Prior to Use, 17: Sea Strainers (Hayward) Open, Clean, and Inspect, 18: Temporary Fuel Oil Offload and Storage Drydock, 19: Rudder Removal And Inspection 20: U/W Body, Preserve (Partial), 21: Anchor Windlass, Level 1 Service and Inspect Minor Repairs, 22: Allied T60-60 Crane, Level 1 Inspect and Repair, 23: Life Jacket Locker, Deck Repairs, 24: Quartermaster Shelter, Refurbish, 25: JP-5 Pass Through Water Tight Fitting, Renew, 26: Steam System Relief Valve, Overhaul, 27: Propulsion Shaft - Strain Gage Readings (All), 28: Centrifugal Fan Overhaul; Fan Unit 1-54-2 29: Vent Ducting Renewal; Fan Unit 1-204-1, 30: Deck Head and Projector Locker, Restoration, 31: Scientist Stateroom Starboard, Refurbish, 32: Scientist Stateroom Port, Refurbish, 33: Helo Foam Equipment Room, Deck Renewal, 34: Vaneaxial Fan Overhaul, 35: Diesel Generator Room No. 1, Bilge Preservation 36: Diesel Generator Room No. 2, Bilge Preservation, 37: Vent Ducting Motor and Gear Room, Renewal. The planned period of performance will be on or about April 15, 2015 through July 14, 2015. A firm-fixed price contract is anticipated for award. Place Of Performance: Contractor's Facility Geographical Restriction - West Coast of the United States to include Alaska and Hawaii The cutter is homeported in Seattle, WA. Interested parties shall submit a capability statement that includes the following: (a) The following company information: a) Point of Contact name, Email address and phone number, b) CAGE Code and DUNS number, and c) In the event that you are a small business, state the category of small business, such as 8(a), HUBZone, Veteran Owned Small Business, Woman Owned Small Business, or SDVOSB. (b) Description of firm's qualifications and capabilities relevant to fulfilling the above requirement. (c) Past performance information that demonstrates successful completion as a prime contractor of projects similar in scope and complexity to the work items above. Include contract numbers, project titles, project description, dollar amounts (award and final values), references with email addresses and telephone numbers. The Government intends to advertise a solicitation for this project in the near future. At this time, a solicitation does not exist; therefore, offers shall not be accepted. It is the potential Offeror's responsibility to monitor FedBizOpps for release of any future solicitation that may result from this Sources Sought Notice. No cost or pricing data is required. All responsible sources may submit a capability statement, which will be considered by the agency. Please send via e-mail to Contracting Officer, Jennifer Stock, at contact@example.gov. Insert - Sources Sought Response to HSCG85-15-S-PSDD15 in the subject line.