Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Utility and Electrical Work – Niche Lighting and Site Power

Active

State & Local

Response Deadline08/20/2026, 08:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the installation of electrical conduits, wiring, junction boxes, and low-voltage lighting systems specifically for columbarium units and surrounding site pathways. Work scope is focused on delivering safe, code-compliant electrical infrastructure to support illumination and functionality within memorial areas, ensuring accessibility and ambiance through properly designed low-voltage lighting solutions. All components must be installed to withstand outdoor conditions and meet durability and safety standards appropriate for cemetery environments. This is a subcontract under the State of North Carolina’s Construction Office, with a NAICS code of 238210 for electrical contracting. The solicitation was posted on July 20, 2026, with a response deadline of August 20, 2026. The work is to be performed across state-owned properties, though specific locations are not detailed. Interested parties must submit proposals by the deadline, and while no set-aside designation is indicated, the project falls under the broader scope of public infrastructure improvement managed by North Carolina’s construction authority. Further details and submission instructions are available through the provided state portal link.

General Info

Install electrical conduits, wiring, and low-voltage lighting for columbariums and pathways on North Carolina state properties.

Agency

North Carolina → State of NC - Construction OfficeView Agency

NAICS

238210 - Electrical Contractors and Other Wiring Installation ContractorsView NAICS

Place of Performance

NC, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 20

subcontract

Response DeadlineAug 20

Submission deadline

Response Deadline

08/20/2026, 08:00:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyNorth Carolina → State of NC - Construction Office

ContactsNo contacts available

OfficeN/A

Organization / Agency

North Carolina → State of NC - Construction Office

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Installation of electrical conduits, wiring, junction boxes, and low-voltage lighting for columbarium units and site pathways.

Similar Contracts

Same NAICS industry code

Elevator Lobby 2 Way CommunicationsThe contract involves the installation of 23 new two-way communication boxes in the Port of Seattle terminal, covering 17 passenger elevators, 3 service elevators, and 3 ramp landing elevators. This work is part of an aviation infrastructure project managed by the Aviation Project Management Group, with the primary objective of enhancing safety and accessibility by ensuring all elevator lobbies are equipped with reliable emergency communication systems. The solicitation is posted as a forecast under NAICS code 238210, indicating it relates to electrical contracting services, and no set-aside specifications have been designated. Point of contact for inquiries is Angela Peterson, with Christina Burdett serving as the project manager; both can be reached via provided phone numbers and email addresses. The contract posting date is July 21, 2026, and all details are accessible through the Port of Seattle’s official solicitation portal.

Aviation Project Management Group

POSTED

about 3 hours ago

DEADLINE

Variable Frequency Drives (VFD) Replacement Phase 3 (DBB)The Port of Seattle’s Aviation Facilities & Infrastructure division is preparing to replace the final 125 remaining failing Robicon Variable Frequency Drives (VFDs) as part of Phase 3 of its VFD Replacement Project. This effort involves the full removal of outdated units and installation of new VFD equipment, with all systems to be fully integrated into the Port’s Direct Digital Controller (DDC) network. The integration will enable real-time monitoring of energy consumption, output control data, and system efficiency, ensuring ongoing operational optimization. The scope includes all necessary wiring, testing, and commissioning activities to deliver a complete and functional system as specified. The project is classified under NAICS code 238210 and is being managed as a Design-Bid-Build (DBB) procurement with no set-aside designation. Yanet Maldonado is the primary point of contact for inquiries, with Sharon Miick serving as the project manager. The forecast was posted on July 21, 2026, and further details can be accessed through the Port’s official solicitation portal.

Aviation Facilities & Infrastructure

POSTED

about 3 hours ago

DEADLINE

Operational Security Cameras Bagwell and North Cargo AreasThe contract entails the full spectrum of design, permitting, and construction services required to install 50 high-resolution surveillance cameras across 43 distinct locations in the Bagwell and North Cargo Operations areas of the Port of Seattle. The primary objective is to enhance security and operational oversight by replacing outdated systems with advanced imaging technology that supports detailed forensic investigations and enforces the Port’s movement rules and regulations. In the Bagwell area, the new camera network will expand coverage to include key drive lanes and entrances, areas currently under-monitored as existing units focus on conveyor systems and security doors. In the North Cargo Operations zone, the solution will introduce flexible, user-controlled Pan Tilt Zoom units to deliver dynamic, broad-area surveillance that adapts to varying operational needs. The project is managed by the Aviation Project Management Group under the Port of Seattle, with primary point of contact Angela Peterson and Project Manager Randa Williams available for coordination. The effort aligns with NAICS code 238210 for electrical contractors and is posted as a forecast with no set-aside designation. The installation will significantly upgrade the Port’s existing security infrastructure, ensuring comprehensive visual monitoring of critical cargo movement corridors and operational zones to improve safety, accountability, and regulatory compliance. All work must be completed in accordance with Port requirements and timelines, with no detailed solicitation number yet assigned but available through the official portal link for ongoing updates.

Aviation Project Management Group

POSTED

about 3 hours ago

DEADLINE

Rental Car Facility (RCF) Quick Turn Around (QTA) Area Fire Suppression System Replacement (Re-bid)The Port of Seattle's Aviation Project Management Group is re-bidding a project to replace the existing aqueous film-forming foam (AFFF) fire suppression system, which contains per- and polyfluoroalkyl substances (PFAS), at the Rental Car Facility located in SeaTac. The scope involves the complete removal of the contaminated AFFF system, including hazardous materials and affected components, followed by the design and installation of a new full dry chemical fire suppression system. This new system will include all necessary components such as storage tanks, control valves, pumps, piping networks, sprinkler heads, and reserve tanks, and must be integrated with the facility's existing fire alarm system to ensure full operational compatibility and compliance with safety standards. The project is categorized under NAICS code 238210 for specialty trade contractors and is part of a broader initiative to eliminate PFAS-containing systems across Port facilities. Primary contact for the solicitation is Todd Rehm, with Project Manager Pat Nakamura available for technical inquiries. The forecast was posted on July 21, 2026, and all work is expected to occur at the designated facility on 3150 S 160th Street, SeaTac.

Aviation Project Management Group

POSTED

about 3 hours ago

DEADLINE

Parking Garage UPSThe contract entails the demo and replacement of the existing uninterruptible power supply system in a parking garage that supports critical infrastructure including ticketing kiosks and automated gates. The project involves installing new UPS equipment along with associated electrical components such as subpanels, feeders, disconnects, and breakers to ensure reliable backup power. The new system will feature integrated data connectivity for remote alarm monitoring and system status reporting to enhance operational awareness and maintenance responsiveness. All work must be executed to maintain continuous functionality of the parking facility’s critical systems during the transition. The opportunity is managed by the Aviation Project Management Group under the Port of Seattle, with the North American Industry Classification System code 238210 indicating electrical contracting services. Primary point of contact for inquiries is Yanet Maldonado, reachable via email and phone, with JJ Jordan serving as the project manager. The solicitation was posted on July 21, 2026, and is categorized as a forecast, suggesting it represents a planned procurement rather than an active solicitation at this time. The performance location is not specified beyond the Port of Seattle jurisdiction, and no set-aside details are provided.

Aviation Project Management Group

POSTED

about 3 hours ago

DEADLINE

Electrical Unit Price Portwide 2026The contract pertains to comprehensive electrical work for the Port of Seattle under the Electrical Unit Price Portwide 2026 solicitation, covering installations of raceways, wiring, medium voltage cabling, boxes, transformers, electrical devices, temporary power and lighting systems, testing, and grounding—all in strict compliance with applicable code-enforcing agency requirements. The Contractor is responsible for providing all labor, tools, equipment, materials, and incidental items necessary to complete tasks as directed by the Port through a Work Authorization, with labor classified according to the specified Schedule of Unit Prices to ensure consistent pricing and scope alignment. All work must be performed in accordance with the Port of Seattle’s standards and procedures, with performance obligations tied to the agency’s operational needs. The contract is administered by Port Construction Services, with primary point of contact Heather Bowden and Project Manager Lesley Miles available for coordination and inquiries. The solicitation is forecasted for 2026 under NAICS code 238210, indicating electrical contracting services, and is accessible via the Port’s official procurement portal for potential bidders seeking to participate in future work authorizations under this unit price framework.

Port Construction Services

POSTED

about 3 hours ago

DEADLINE

Supply and Installation of Network Data Drop Points 1220020268648The contract pertains to the supply and installation of network data drop points at the Victoria Jubilee Hospital in Jamaica, under solicitation number 2331/6752 issued by the Kingston Public Hospital under the Government of Jamaica. The solicitation was posted on July 20, 2026, with a response deadline of July 28, 2026, at 7:00 PM local time, indicating a narrow window for prospective bidders to submit proposals. The project requires the provision and proper installation of data points to support hospital network infrastructure, ensuring reliable connectivity for medical and administrative systems. The work is to be performed on-site at the hospital, with no specified set-aside or NAICS code provided, suggesting open eligibility for qualified contractors. The contract does not list a point of contact, and all necessary information must be obtained through the official ePPS portal for Jamaica’s public procurement system.

Kingston Public Hospital

POSTED

about 9 hours ago

DEADLINE

Parking Guidance Systems for CCG, NSG, UCG, and WCGTexas A&M University is seeking proposals for the installation of Parking Guidance Systems across four campus areas: CCG, NSG, UCG, and WCG under solicitation number SSC_2025-06837. The opportunity is open to state, local, and educational government entities and is posted on July 20, 2026, with a submission deadline of September 30, 2026. All work must be performed in Texas, and responses should be submitted through the Texas SmartBuy portal at the provided link. Primary point of contact for technical and procedural inquiries is Autumn Atkinson, reachable at 979-862-1748 or aatkinson22@tamu.edu. For questions regarding submission requirements and process, interested parties should contact Mark Kelly at Mark.Kelly@sscserv.com or (979) 218-8494. The solicitation does not specify a set-aside classification or NAICS code, and the project is part of a broader initiative to enhance campus parking efficiency and user experience.

Texas A&M University

POSTED

about 12 hours ago

DEADLINE

Temporary Electrical and Plumbing Services for EventsThe City of San Antonio Convention and Sports Facilities Department is seeking qualified electrical and plumbing contractors to provide temporary services for events at the Henry B. Gonzalez Convention Center, including the Lila Cockrell Theatre, and the Alamodome, including the Illusions Theater, with potential inclusion of future facilities. Contractors must be licensed and experienced in delivering safe, reliable temporary electrical and plumbing systems tailored to the unique demands of large-scale events. The solicitation, identified as RFQ26-108 and RFx 6100019795, falls under product categories 91438 for Electrical and 91468 for Plumbing, and all responses must be submitted by August 10, 2026, at 11:00 a.m. Central Time. A pre-submittal conference is scheduled for July 27, 2026, at 10:00 a.m. Central Time via Microsoft Teams, and while attendance is optional, it is strongly recommended for clarity on expectations and requirements. Proposals must demonstrate proven capability, adherence to safety standards, and the ability to respond promptly to event-specific needs. The contract will support operations for a variety of public and private events held within the designated venues, requiring contractors to be flexible, available on short notice, and fully compliant with all city codes and protocols. Questions regarding the RFQ should be directed to Stephanie Nouman or Troy Elliott through the contact details listed, and all submissions must be made through the designated Texas SmartBuy portal. The procurement is issued under the City of San Antonio’s authority, with performance expected within San Antonio, Texas, and no set-aside provisions are specified.

CITY OF SAN ANTONIO

POSTED

about 13 hours ago

DEADLINE

OER EVSE Level 3 Pawtucket/Central Falls Train Station & Warwick Park & RideThe Office of Energy Resources is soliciting a vendor to install four Direct Current fast chargers totaling 150kW each, with each charger capable of simultaneously powering four electric vehicles, at two designated locations in Rhode Island: the Pawtucket/Central Falls Commuter Rail Station parking lot and the Warwick Park and Ride parking lot. The project encompasses all site work, electrical connections, and equipment furnishing required for full operational deployment. Included with each installation are initial station activation and configuration services, a five-year prepaid Commercial Cloud Plan Subscription offering comprehensive station management features, and five years of prepaid ChargePoint Assure or an equivalent service plan to ensure ongoing maintenance, monitoring, and support. Bidders are required to attend a prebid meeting on Wednesday, July 29, 2026, at 9:00 AM, beginning at the Pawtucket location and followed immediately by the Warwick site. Proposals must be submitted no later than August 14, 2026, at 3:30 PM, under solicitation number RFQ27006847, with all inquiries directed to Katherine Missell at the provided email address.

State of Rhode Island

POSTED

about 15 hours ago

DEADLINE

Electrical Installation and Wiring ServicesThe contract entails the installation of electrical systems for commercial or infrastructure projects under a subcontract awarded by the Defense Logistics Agency under the Department of Defense. It covers all aspects of electrical work including wiring, conduits, lighting, and power distribution, aligned with NAICS code 238210 for electrical contractors. The solicitation was posted on July 20, 2026, and performance location details are unspecified, indicating the work may occur across multiple sites under DLA’s jurisdiction. The contract number SPE60524D9403 and delivery order SPE60526FHSC7 are referenced for tracking and compliance, and the work is expected to support defense-related infrastructure requirements through specialized electrical services.

Defense Logistics Agency

POSTED

about 16 hours ago

DEADLINE

Electrical and Control System IntegrationThe contract titled Electrical and Control System Integration focuses on the installation and integration of electrical wiring, motor controls, and variable frequency drives with the building management system, ensuring full compliance with NEMA and AGA standards. The work requires precise coordination between electrical systems and automated building controls to deliver efficient, reliable, and code-compliant performance across the facility. All components must be properly sized, configured, and tested to meet industry specifications and support seamless communication with the existing building management infrastructure. This is a subcontract opportunity issued by Appalachian State University in North Carolina, with a posted date of July 20, 2026, and a response deadline of August 3, 2026. The North American Industry Classification System code 238210 categorizes the work under electrical contracting services. There is no set-aside designation, and the place of performance details are not specified, though the project is tied to the university’s facilities. Interested parties must submit proposals by the deadline via the provided link, and bidders are expected to demonstrate experience in integrating complex electrical and control systems within institutional environments.

Appalachian State University

POSTED

about 16 hours ago

DEADLINE

More opportunities from North Carolina → State of NC - Construction Office

Same awarding agency

Material Supply – Concrete and RebarThe contract involves the supply of ready-mix concrete and reinforcing steel for foundational, slab, and structural components essential to construction projects under the State of North Carolina’s Construction Office. The solicitation is classified as a subcontract and is aligned with NAICS code 327320, which pertains to concrete product manufacturing. The opportunity was posted on July 20, 2026, with a firm response deadline of August 20, 2026, allowing interested parties sufficient time to prepare and submit proposals. While the specific locations for performance are not detailed, the work is expected to support state-funded infrastructure initiatives across North Carolina. This procurement is intended to secure reliable and compliant material suppliers capable of meeting the structural and quality demands of public construction projects.

Ready-Mix Concrete Manufacturing

POSTED

about 16 hours ago

DEADLINE

in about 1 month

Material Supply – Granite/Stone for Niche UnitsThe contract involves the supply of pre-cut or custom granite and stone panels along with niche fronts tailored to specific design requirements for columbarium installations. All materials must meet exact specifications to ensure proper fit, aesthetic consistency, and durability in the final structure, with a focus on precision manufacturing and adherence to architectural standards. The work is classified under NAICS code 327993 and is structured as a subcontract under the State of North Carolina’s Construction Office, with responses required by August 20, 2026. The materials are intended for use in a state-level project, though the exact location of performance is not specified, and the solicitation is posted openly through the state’s procurement portal.

Mineral Wool Manufacturing

POSTED

about 16 hours ago

DEADLINE

in about 1 month

Landscaping and Site FinishingThe contract titled Landscaping and Site Finishing encompasses full restoration and beautification of a cemetery site through final grading, sodding, planting, mulching, and hardscape installation. The work is intended to return the grounds to a dignified, well-maintained condition consistent with the solemn purpose of the site. The solicitation is issued as a subcontract under NAICS code 561730 and is managed by the State of NC - Construction Office, with the North Carolina agency as the overseeing entity. Bids must be submitted by the deadline of August 20, 2026, and the work is expected to be performed at the cemetery location within North Carolina, though the exact city and zip are not specified. The opportunity was posted on July 20, 2026, and interested parties can access further details through the provided state portal link.

Landscaping Services

POSTED

about 16 hours ago

DEADLINE

in about 1 month

Site Excavation and GradingThe contract involves site preparation activities for a columbarium structure, including clearing, grubbing, excavation, backfill, and grading to ensure proper construction readiness and accessible site layout. These tasks are critical to establishing a stable, level foundation and safe ingress and egress for the facility, complying with structural and safety requirements. The work is classified under NAICS code 237990, indicating it falls under other heavy and civil engineering construction, and is issued as a subcontract by the State of North Carolina’s Construction Office. The solicitation was posted on July 20, 2026, with a response deadline of August 20, 2026, and performance will occur at an unspecified location within North Carolina. There is no set-aside designation specified, and detailed contact information for inquiries is not provided in the document.

Other Heavy and Civil Engineering Construction

POSTED

about 16 hours ago

DEADLINE

in about 1 month

Site Concrete Work – Foundations, Slabs, and FootingsThe contract encompasses all aspects of concrete work required for the construction of columbarium foundations, walkways, and site pads, including excavation, formwork, reinforcement, pouring, and finishing. This work is classified under NAICS code 238110 and is structured as a subcontract opportunity under the State of North Carolina’s Construction Office. The solicitation was posted on July 20, 2026, with a firm deadline for responses set for August 20, 2026, at 8:00 PM. While the exact location of performance is not specified, the project is tied to state infrastructure managed by the North Carolina agency. Interested parties must submit proposals through the official portal provided in the solicitation link, and no set-aside provisions or organization type restrictions are indicated. All work must be executed to meet the technical and structural standards implied by the scope of concrete installation for permanent memorial site components.

Poured Concrete Foundation and Structure Contractors

POSTED

about 16 hours ago

DEADLINE

in about 1 month

Columbarium Niche Installation – Masonry & StoneworkThe contract encompasses the fabrication and installation of granite or stone columbarium niche units designed for the respectful placement of cremated remains, including all associated masonry and stonework tasks such as precise setting, thorough leveling, professional sealing, and final finishing to ensure durability and aesthetic quality. The work must adhere to strict standards for structural integrity and long-term preservation, with attention to detail in every phase from material handling to final installation at the designated site. This is a subcontract opportunity issued by the State of North Carolina’s Construction Office under NAICS code 238990, with a posted date of July 20, 2026, and a response deadline of August 20, 2026. The place of performance is within North Carolina, though specific location details are not provided, and all work must be completed in compliance with state construction regulations. Interested parties must submit proposals by the deadline through the official state portal linked in the contract data.

All Other Specialty Trade Contractors

POSTED

about 16 hours ago

DEADLINE

in about 1 month

North Carolina Department of Military and Veterans AffairsThe North Carolina Department of Military and Veterans Affairs is soliciting proposals for improvements to the Western Carolina State Veterans Cemetery, with the solicitation number SCO-24-29071-01E posted on July 20, 2026, and responses due by August 20, 2026. The project is managed by the State of NC Construction Office and falls under a State, Local, or Educational (SLED) agency procurement. All work must be performed at the cemetery location in North Carolina, and the primary point of contact for inquiries is Shahgol Mostashari. This solicitation is open to qualified contractors capable of delivering cemetery infrastructure enhancements to honor and serve North Carolina’s veterans, with no specific set-aside designation indicated. Interested parties should submit proposals through the official eProcurement portal before the deadline.

Other Heavy and Civil Engineering Construction

POSTED

about 16 hours ago

DEADLINE

in about 1 month

Heavy Hauling and Equipment TransportThe contract pertains to the transportation of heavy construction equipment and materials to and from project sites under the jurisdiction of the North Carolina Construction Office. It is designated as a subcontract with a NAICS code of 484220, indicating it covers heavy and tractor-trailer truck transportation. The opportunity was posted on July 17, 2026, with a response deadline of August 19, 2026, at 6:30 PM, leaving prospective bidders a limited window to prepare and submit their proposals. The place of performance spans unspecified locations within North Carolina, requiring contractors to be prepared to operate across various project sites throughout the state. Although details regarding set-asides, point of contact, and specific office address are not provided, the solicitation is accessible through the State of NC’s official procurement portal, indicating formal state government procurement procedures apply. Participation requires compliance with state regulations and readiness to handle the logistical challenges of transporting oversized and heavy construction assets reliably and safely.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Environmental Compliance and MonitoringThe contract pertains to environmental compliance and monitoring related to stormwater management, erosion control, and overall environmental protection during construction activities in North Carolina. It requires the contractor to implement and maintain systems and protocols that ensure adherence to state and federal environmental regulations throughout the project lifecycle, with a focus on mitigating sediment runoff, preserving water quality, and minimizing ecological disruption. The work involves ongoing monitoring, reporting, and corrective actions to maintain compliance with permitted conditions and to respond to environmental incidents in a timely and effective manner. The contract is structured as a subcontract with a North Carolina state agency, specifically the State of NC - Construction Office, and is classified under NAICS code 541620, indicating environmental consulting services. The solicitation was posted on July 17, 2026, with a response deadline of August 19, 2026. While specific locations and contact details are not provided, the performance is expected to occur across construction sites under the jurisdiction of the North Carolina agency. The contractor must be prepared to coordinate with state regulators, provide detailed documentation of compliance measures, and ensure that all environmental controls are integrated seamlessly into construction operations.

Environmental Consulting Services

POSTED

DEADLINE

Surveying and Site Layout ServicesThe contract seeks qualified vendors to provide topographic surveying, boundary marking, and precise site layout services to support construction activities under a subcontract arrangement. The work is required to be performed for the State of North Carolina’s Construction Office, with all tasks centered on ensuring accurate spatial data and physical demarcation to guide subsequent building efforts. Respondents must deliver high-precision surveying results that align with established standards for construction readiness, including clear identification of property lines and detailed ground elevation mapping to avoid costly delays or legal disputes during development. Submissions are due by August 19, 2026, at 6:30 PM, with the solicitation publicly posted as of July 17, 2026. The North American Industry Classification System code 541370 applies, indicating specialized professional services in land surveying and mapping. While the specific location of performance has not been detailed, work will occur at sites under the jurisdiction of the North Carolina Construction Office. Interested parties are encouraged to review the official posting for full technical requirements and compliance expectations, though no setAside information or point of contact has been provided in the public data.

Surveying and Mapping (except Geophysical) Services

POSTED

DEADLINE

Paving and Asphalt ServicesThe contract titled Paving and Asphalt Services involves the grading, base preparation, and asphalt paving for roads, parking lots, and access routes under a subcontract arrangement. It is issued by the State of NC - Construction Office under the North Carolina agency, with a NAICS code of 237310, indicating classification within heavy and civil engineering construction. The solicitation was posted on July 17, 2026, with a response deadline of August 19, 2026, at 6:30 PM, requiring interested parties to submit proposals prior to that time. The work is to be performed in North Carolina, though specific cities or locations are not detailed in the provided data. The contract does not specify a set-aside type, and no point of contact information is listed, with the official solicitation details accessible via a public web link.

Highway, Street, and Bridge Construction

POSTED

DEADLINE

Concrete Forming and PlacementThe contract pertains to the forming, reinforcing, and pouring of concrete for foundational, wall, and structural components necessary for construction projects under the State of North Carolina. This subcontract is part of a broader effort by the North Carolina Construction Office to advance public infrastructure initiatives, with work to be performed across unspecified locations within the state. The solicitation, posted on July 17, 2026, requires proposals to be submitted no later than August 19, 2026, at 6:30 PM, and is classified under NAICS code 238110, which designates concrete work contractors. There is no set-aside designation specified, and the place of performance details remain unprovided. Interested parties must submit responses through the official state portal linked in the posting.

Poured Concrete Foundation and Structure Contractors

POSTED

DEADLINE