Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

UXO Safety Training and Protocol Management

Active

Federal

Response Deadline08/27/2026, 03:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

All personnel must complete UXO safety training to ensure compliance with established protocols, strictly enforcing a no-tampering policy for any unexploded ordnance or suspicious objects. Immediate reporting of such items is required through coordinated channels with JTTCCC to maintain site safety and operational integrity. The subcontract, issued under NAICS code 611512 by the Department of Defense office FA2823 Aftc Pzio, is performance-based and centered on safety compliance at a location with a zip code of 32542. The solicitation was posted on July 28, 2026, with responses due by August 27, 2026, at 3:00 PM, and all activities must adhere strictly to the outlined safety and reporting procedures.

General Info

All personnel must complete UXO safety training and immediately report suspicious objects to JTTCCC under DoD contract 32542.

Agency

Department Of Defense → FA2823 Aftc PzioView Agency

NAICS

611512 - Flight TrainingView NAICS

Place of Performance

0, FL, 32542, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 28

subcontract

Response DeadlineAug 27

Submission deadline

Response Deadline

08/27/2026, 03:00:00 PM UTCin 29 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FA2823 Aftc Pzio

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → FA2823 Aftc Pzio

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Ensure all personnel complete UXO safety training, enforce no-tampering rules, and report suspicious objects immediately in coordination with JTTCCC.

Similar Contracts

Same NAICS industry code

On-Site Training Delivery (Operator and Maintenance)The contract entails the delivery of eight days of on-site training in Pakistan, divided into five days for 24 operator trainees and three days for 24 maintenance personnel, all to be conducted by manufacturer-certified instructors. The training is designed to ensure proficiency in equipment operation and maintenance procedures, with a focus on hands-on instruction tailored to the specific needs of the personnel involved. The work must be performed entirely on-site in Pakistan, with no remote or virtual components permitted. This subcontract was posted on July 28, 2026, with responses due by August 13, 2026, and falls under the NAICS code 611512 for other training and educational support services. The awarding agency is the Department of State through its Acquisitions - Inl office, though no specific location or point of contact details are provided. The contract does not specify a set-aside classification, indicating it is open to general competition among qualified subcontractors with the capability to deliver certified training in a foreign environment.

Acquisitions - Inl

POSTED

DEADLINE

Flight Operations Training and Certification ServicesThe contract requires comprehensive flight operations training and certification services focused on chase pilots and observers, with an emphasis on RPA coordination, air traffic control protocols, and emergency response procedures. Training must be delivered in both initial and recurrent formats to ensure continuous competency and compliance with operational standards, and all training activities must include formal certification and meticulous recordkeeping to maintain accountability and regulatory alignment. The effort is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses are eligible to compete, and it falls under NAICS code 611512 for other schools and instruction. The performance location is specified as Linda, California, with a ZIP code of 92518, and the contracting activity is affiliated with the Department of Defense through the W7MX Uspfo Activity Caang 163 office. The solicitation was posted on July 27, 2026, with responses due by August 27, 2026.

W7MX Uspfo Activity Caang 163

POSTED

DEADLINE

Operator Training for Autoclave SystemsThe contract pertains to on-site training for laboratory personnel focused on the safe operation, cycle programming, maintenance, and documentation export functions of autoclave systems using touch-screen interfaces and USB methods. Training will be delivered directly at the facility where the equipment is located, ensuring hands-on proficiency and context-specific learning for operators and technicians responsible for daily use and upkeep. The scope emphasizes practical skills development tailored to the specific systems in use, with an emphasis on compliance, efficiency, and accurate record-keeping. The training opportunity is structured as a subcontract under the Government of Canada’s Department of Agriculture and Agri-Food, with a North American Industry Classification System code of 611512, indicating it falls within educational support services. The solicitation was posted on July 27, 2026, and responses must be submitted by September 2, 2026, at 7:00 p.m. Eastern Time. The place of performance and other location details are unspecified, suggesting that training may be conducted at multiple sites across Canada where the department’s laboratory equipment is deployed. Participation requires the contractor to demonstrate capability in delivering technical instruction aligned with government standards for laboratory safety and equipment management.

Department of Agriculture and Agri-Food

POSTED

DEADLINE

in about 1 month

On-Site Clinical & Technical Training ServicesThe contract involves the delivery of on-site training services for clinical staff and biomedical engineers focused on the operation, maintenance, and troubleshooting of Magnetic Resonance Spectroscopy (MRS) equipment during its installation phase. The training is designed to ensure personnel are thoroughly prepared to utilize and support the technology effectively once deployed, with an emphasis on hands-on, practical instruction tailored to both clinical and technical roles. The work is to be performed at a location in Saint Louis, Missouri, with a zip code of 63106, and must be completed in alignment with the installation timeline of the MRS system. This is classified as a subcontract under NAICS code 611512, indicating it falls under the category of professional and commercial training services. The contract is managed by the Department of Veterans Affairs through its 255-NETWORK Contract Office 15 (36C255) and was posted on July 24, 2026, with a response deadline of August 7, 2026. There is no set-aside designation specified, and while details regarding the point of contact or broader organizational context are not provided, the performance location and scope suggest the training is critical to the successful integration of MRS technology into a VA healthcare facility.

255-NETWORK Contract Office 15 (36C255)

POSTED

DEADLINE

On-Site Operator and Maintenance TrainingThe contract requires the delivery of 40 hours of on-site training at Nellis Air Force Base for operators and maintenance personnel, focusing on the safe operation, routine maintenance, and effective use of diagnostic software. The training must be conducted in person and tailored to ensure participants gain hands-on proficiency with system procedures and troubleshooting techniques essential to mission readiness. This subcontract is designated as a Total Small Business Set-Aside under FAR 19.5, meaning only small business concerns are eligible to respond, and it falls under NAICS code 611512 for other technical and trade schools. The opportunity was posted on July 24, 2026, with a response deadline of August 28, 2026, at 5:00 PM. The work is to be performed entirely at Nellis AFB, Nevada, under the oversight of the Department of Defense through contract FA4861 99 Cons Lgc, with no specific point of contact listed.

FA4861 99 Cons Lgc

POSTED

DEADLINE

in about 1 month

156-27-022 - On-Site Kodiak 100 Pilot TrainingThe Virginia State Police is soliciting bids to establish a term contract with a qualified firm to deliver on-site, aircraft-specific training for up to eleven pilots who operate the agency’s Daher Kodiak 100 aircraft. The training includes both initial familiarization and recurrent proficiency instruction, all to be conducted at the Virginia State Police Aviation Division Headquarters located at 7521 Airfield Drive in North Chesterfield, Virginia. Bids must be submitted by the deadline of August 6, 2026, and awards will be determined based on a grand total proposal, with no additional cost allocations permitted beyond what is clearly specified in the bid. The contract is intended to ensure continuous operational readiness and safety standards for agency pilots through structured, hands-on training delivered directly at the agency’s location. All communications related to this solicitation should be directed to Elizabeth Menc at the Virginia State Police, via email at elizabeth.menc@vsp.virginia.gov or by phone at 804-385-4024. The solicitation number is IFB-124932, and it was posted on July 23, 2026. There is no set-aside designation specified, and the procurement is open to all qualified firms under the SLED (State, Local, and Education) category. Interested parties may access additional details through the provided online portal, but all responses must comply with the submission requirements and timing outlined in the official bid documents. Contractors are expected to possess the necessary expertise, credentials, and logistical capability to conduct training onsite with the specific aircraft model used by the agency.

Virginia State Police

POSTED

DEADLINE

Clinical Training Services for Medical StaffThe contract seeks providers to deliver clinical training to VA healthcare staff on the operation, safety protocols, and ventilation modes of the Hamilton-MR1 ventilator, with services available either on-site or virtually. Training must equip medical personnel with the competence to safely and effectively use the device in clinical settings, ensuring optimal patient care. The effort is designated as a subcontract under NAICS code 611512, indicating it is for other commercial and industrial training providers, and performance is expected to occur primarily in Prescott, Arizona, with a zip code of 86313-5001. The opportunity was posted on July 23, 2026, with responses due by August 4, 2026, and is managed by the Department of Veterans Affairs through its 262-NETWORK Contract Office 22. While no set-aside classification or specific point of contact is provided, the requirement emphasizes direct interaction with VA medical staff to achieve proficiency in ventilator use, with no restrictions on the delivery method as long as training objectives are met. All potential vendors must align their services with the clinical and safety standards expected by VA facilities.

262-NETWORK Contract Office 22 (36C262)

POSTED

DEADLINE

Damage Control Training (DCT) DeliveryThe contract seeks a subcontractor to deliver comprehensive damage control training for shipboard personnel, focusing on practical, hands-on instruction in flooding mitigation, shoring, patching, and emergency response procedures. Training must be conducted in realistic, immersive environments designed to replicate real-world shipboard conditions, ensuring trainees develop the skills necessary to effectively respond to damage scenarios at sea. The instruction must be structured to meet naval standards and align with operational readiness requirements, emphasizing scenario-based learning and hands-on application. This subcontract, issued under NAICS code 611512 by the Navy Warfare Center Training Systems Division within the Department of Defense, is targeted for performance in Seattle. The opportunity was posted on July 23, 2026, with proposals due by August 3, 2026. While no specific set-aside designation or point of contact is provided, the emphasis is on delivering high-fidelity, mission-relevant training that enhances crew proficiency in damage control operations under stress. The contract does not include details on duration, funding, or performance measures beyond the scope of training content and delivery environment.

Nawc Training Systems Division

POSTED

DEADLINE

Live-Fire Fire Fighting Training InstructionThe contract seeks a subcontractor to deliver instructor-led live-fire firefighting and damage control training to Navy, NROTC, and Coast Guard personnel using approved curricula and shipboard simulation platforms. Training must be conducted in accordance with established military standards and delivered in a realistic, hands-on environment to ensure operational readiness. The work is to be performed in Seattle and requires specialized expertise in maritime emergency response protocols, with instructors expected to maintain proficiency in current training methodologies and safety procedures. The solicitation was posted on July 23, 2026, with a response deadline of August 3, 2026, and falls under NAICS code 611512 for other schools and instruction. This contract is classified as a subcontract within the Department of Defense, specifically managed by the Nawc Training Systems Division. No set-aside provisions or eligibility restrictions are indicated, and performance location is fixed at the designated facility in Seattle. All proposals must demonstrate capability to execute training under controlled live-fire conditions while adhering to federal and military safety regulations.

Nawc Training Systems Division

POSTED

DEADLINE

User Training for Clinical StaffThe contract requires the provision of on-site or remote training to Veterans Affairs clinical staff on the proper operation, calibration, and troubleshooting of the AMTAS FLEX system. Training must be delivered in a manner that ensures staff competency, with comprehensive documentation and formal sign-off required to confirm completion and understanding. The work is being solicited as a subcontract under a Service-Disabled Veteran-Owned Small Business Set Aside, meaning only eligible businesses owned and controlled by service-disabled veterans may respond. The North American Industry Classification System code 611512 indicates the training falls under other schools and instruction services. The solicitation was posted on July 22, 2026, with responses due by July 30, 2026, and the contracting office is the 247-NETWORK Contract Office 7 within the Department of Veterans Affairs. Performance location details are unspecified, allowing flexibility for either on-site support at VA facilities or remote delivery.

247-NETWORK Contract Office 7 (36C247)

POSTED

DEADLINE

in about 23 hours

On-Site Operator Training and OrientationFour hours of on-site training will be provided to operators and maintenance staff focused on the safe operation and preventive maintenance of the CAT 275XE equipment. The training is designed to ensure personnel are proficient in handling the machinery safely and implementing routine maintenance procedures to maximize uptime and reduce operational risks. This subcontract opportunity is posted under NAICS code 611512 and is managed by the FWS Sat Team 3 under the Department of the Interior. The solicitation was posted on July 22, 2026, with a firm deadline for responses set for August 6, 2026, at 6:00 PM. The place of performance and specific location details are not specified, and no set-aside criteria or point of contact information is provided. Interested parties must submit proposals through the designated SAM.gov portal before the deadline.

POSTED

DEADLINE

Apprentice Training and Workforce DevelopmentThe contract seeks providers to supply registered apprentices to fulfill state-mandated apprentice-to-journeyman ratios on public works contracts valued at over one million dollars, ensuring compliance with workforce development requirements under NAICS code 611512. This subcontract opportunity is managed by the State of Rhode Island and is designed to support workforce training initiatives by connecting qualified training entities with contractors required to meet specific apprenticeship standards on eligible projects. The solicitation is open for responses until August 18, 2026, with all proposals expected to demonstrate the ability to recruit, train, and place registered apprentices in alignment with state regulations and industry benchmarks. Parties interested in participating must be prepared to supply a pipeline of certified apprentices across relevant trades, ensuring continuous coverage for projects throughout their duration. While exact locations of performance are not specified, the requirement applies broadly to state-funded contracts exceeding the million-dollar threshold anywhere within Rhode Island. The contract emphasizes workforce development as a core objective, with providers expected to have established relationships with accredited apprenticeship programs and a track record of supporting compliant labor practices. All interested parties should review the opportunity through the official state vendor portal before the deadline to ensure full compliance and timely submission.

State of Rhode Island

POSTED

DEADLINE

More opportunities from Department Of Defense → FA2823 Aftc Pzio

Same awarding agency

Environmental Compliance and Endangered Species MonitoringThe contract requires on-site environmental monitoring to ensure compliance with the Endangered Species Act, with a specific focus on the protection of the Red-Cockaded Woodpecker and its habitat. Work involves regular field assessments, data collection, and reporting to document habitat conditions and any potential impacts from activities in the designated area. The monitoring efforts must be conducted in accordance with federal regulations to prevent harm to the species and its critical habitat, and all findings must be accurately documented and submitted to relevant authorities. The contract is classified as a subcontract under NAICS code 541620 for environmental consulting services and is associated with the Department of Defense through the agency designation FA2823 AFTC PZIO. The place of performance is located in the zip code 32542, indicating the work will occur at a specific military or federal facility in that region. Proposals must be submitted by August 27, 2026, and the contract was posted on July 28, 2026, allowing potential vendors approximately one month to prepare and respond. No set-aside type is specified, and the point of contact information is not provided, meaning applicants should refer to the official solicitation portal for additional details or clarification.

Environmental Consulting Services

POSTED

DEADLINE

Certified Weighing and Measurement ServicesThe contract requires the operation and maintenance of certified weight scales to accurately measure the net tonnage of harvested timber and issue validated weight tickets for official government verification. This service must be performed in strict compliance with established standards to ensure precision and regulatory acceptance, with all measurements serving as critical data for federal oversight and compliance purposes. The work is to be carried out at a designated location with a zip code of 32542, and the contractor must be prepared to support government verification processes through reliable and auditable documentation. The solicitation is classified as a subcontract under NAICS code 541380, indicating it falls within the range of scientific and technical consulting services. Although no set-aside designation is specified, the contract is issued under the Department of Defense through agency FA2823 Aftc Pzio, suggesting defense-related timber procurement activities. Responses must be submitted no later than August 27, 2026, at 3:00 PM, and the opportunity is publicly accessible through the SAM.gov platform with the provided link. There is no designated point of contact listed, and detailed location information beyond the zip code is not provided.

Testing Laboratories and Services

POSTED

DEADLINE

Hauling and Timber TransportationThe contract titled Hauling and Timber Transportation requires the transportation of harvested timber from cut sites to designated delivery points using compliant trucks and trailers, with strict adherence to safety, environmental, and operational standards. Contractors must maintain accurate logs and vehicle reporting systems to ensure accountability and regulatory compliance throughout the hauling process. The work is to be performed at a location with a zip code of 32542, and the contract falls under NAICS code 484220, which classifies it as a truck transportation service for lumber and wood products. This is a subcontract opportunity issued by the Department of Defense under the agency name FA2823 Aftc Pzio, with a response deadline of August 27, 2026, at 3:00 PM. The posting date was July 28, 2026, and all potential bidders must submit proposals before the deadline to be considered.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Timber Harvesting and Felling OperationsThe contract involves the harvesting of 370 acres of sand pine timber across four designated units, requiring full felling, delimbing, and bucking operations using heavy forestry equipment. The work must be performed in accordance with industry-standard practices to ensure efficiency and minimal environmental impact, with all operations confined to the specified geographic area identified by the zip code 32542. The contract is classified as a subcontract under the NAICS code 113310 for Forestry Logging, and it is issued by the Department of Defense through the agency designation FA2823 Aftc Pzio. All proposals must be submitted by the deadline of August 27, 2026, at 3:00 PM, with the opportunity posted on July 28, 2026, through the official SAM.gov platform.

POSTED

DEADLINE

Flight Training Delivery at Contractor FacilityThe contract requires the delivery of two days of hands-on flight training for government personnel at the contractor’s facility, utilizing supplied drone systems, a developed curriculum, and certified instructors. The training is designed to provide practical experience with drone operations under supervised conditions, ensuring participants gain proficiency in real-world scenarios. All equipment, instructional materials, and qualified personnel necessary to execute the training are the responsibility of the contractor. The training is subject to performance at a designated location with a zip code of 32542, and the work is structured as a subcontract under a Small Business Set Aside, specifically designated as total set aside for small businesses. The North American Industry Classification System code is 611519, indicating the scope falls under other schools and instruction. The solicitation was posted on July 28, 2026, with a response deadline of August 12, 2026, at 5:00 PM. The contracting agency is the Department of Defense, identified under the office designation FA2823 Aftc Pzio. While no specific point of contact or detailed office address is provided, the place of performance is clearly defined. The contract is accessible via the SAM.gov portal, and bidders must qualify as a small business to be eligible for award under the set aside provisions. Performance must be completed at the contractor’s facility, and adherence to the provided curriculum and use of the government-supplied drone systems is mandatory.

Other Technical and Trade Schools

POSTED

DEADLINE

Launch Interface SupplyThe contract seeks the supply of a single launch interface system designed to deploy drone targets with full mechanical and electrical compatibility with existing drone and ground control station systems. This is a subcontract under a Small Business Set Aside, specifically reserved for small businesses as defined by the SBA, and falls under NAICS code 333992 for other miscellaneous manufacturing. The opportunity was posted on July 28, 2026, with responses required by 5:00 PM on August 12, 2026. Performance is expected to be conducted at a location with a zip code of 32542, and the contracting agency is the Department of Defense under the office designation FA2823 Aftc Pzio. No point of contact information or specific city or state details are provided beyond the zip code, and the solicitation number is not assigned. The contract is accessible online through the SAM.gov platform via the provided UI link.

Welding and Soldering Equipment Manufacturing

POSTED

DEADLINE

Paired Hand Controller SupplyThe contract seeks the supply of two paired hand controllers designed for manual operation of drones, ensuring full compatibility with ground control stations and drone target systems. These controllers are essential for precise, real-time drone manipulation in operational environments and must meet technical specifications to integrate seamlessly with existing military-grade systems. The solicitation is a subcontract under a Small Business Set Aside, specifically designated for total small business participation, with the NAICS code 334418 indicating classification under other semiconductor and related device manufacturing. Performance is required at a location with zip code 32542, and all responses must be submitted by August 12, 2026, at 5:00 PM. The contract is managed by the Department of Defense through the FA2823 AFC PZIO office, with no specific point of contact listed, and interested parties must reference the official SAM.gov listing for further details and submission protocols.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE

Ground Control Station Supply with Mission Planner SoftwareThe contract requires the supply of two ground control stations preloaded with Mission Planner software, designed specifically for use with drone targets to enable mission planning, telemetry monitoring, and flight control functionalities. Each station must be fully compatible with the designated drone systems and capable of supporting operational requirements in real time. The solicitation is a subcontract under a Small Business Set Aside designation, reserved entirely for small businesses as defined by the SBA, and is classified under NAICS code 334118 which pertains to other electronic instrument manufacturing. The proposed delivery must satisfy technical specifications for seamless integration and reliable performance in field operations. The posting date is July 28, 2026, with a firm response deadline of August 12, 2026, at 5:00 PM. The place of performance is identified as a location with a zip code of 32542, and the contracting agency is the Department of Defense under the office designation FA2823 Aftc Pzio. There is no designated point of contact listed, and all inquiries must be directed through the official SAM.gov portal using the provided UI link. The contract does not specify additional deliverables beyond the two configured ground control stations, though compliance with software compatibility and hardware reliability standards is implied and critical to successful bid submission.

Computer Terminal and Other Computer Peripheral Equipment Manufacturing

POSTED

DEADLINE

Commercial Drone Targets SupplyThe contract is for the supply of ten commercial off-the-shelf drone targets designed to meet Technical Requirements Documents (TRD) and serve as test targets for military evaluation. Each drone must be fully compatible with standard ground control stations and hand controllers to ensure seamless operational integration during testing scenarios. The requirement is issued as a subcontract under a Small Business Set Aside designation, meaning only small businesses are eligible to bid. The North American Industry Classification System code 334511 identifies the category as the manufacturing of guided missile and space vehicle parts and equipment. The place of performance is specified with a ZIP code of 32542, located in Florida, and responses must be submitted by August 12, 2026, at 5:00 PM Eastern Time. The solicitation was posted on July 28, 2026, by the Department of Defense under the FA2823 AFTC PZIO office.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

Lenel Access Control MaintenanceThe contract issued by the Air Force Test Center Product Zone Integration Office at Eglin AFB, Florida, seeks commercial maintenance and on-call support services for the Honeywell S2 NetBox Access Control System serving the 7th Special Forces Group (Airborne) at Duke Field. Services include routine and emergency repairs, diagnostics, troubleshooting, bi-annual preventative maintenance, software updates, and component replacements for access readers, door locks, controllers, power supplies, and wiring, with cameras excluded. Work must be performed Monday through Friday, 0800 to 1700, excluding federal holidays, with emergency response availability as needed. All personnel must be Honeywell S2 NetBox certified, and performance must maintain a minimum 95% service completion rate. Contractors are required to submit a Quality Control Plan within 30 days of award and an annual System Health Assessment detailing equipment obsolescence, failure trends, and upgrade recommendations. Compliance with Contractor Manpower Reporting (CMR) via the Army’s secure portal is mandatory. The contract is a Firm Fixed Price acquisition under FAR Part 12, with a base performance period from September 1, 2026, to August 31, 2027, and two one-year option periods extending through August 31, 2029. While pricing details for all line items are blank, the solicitation requires full SAM registration, valid Unique Entity Identifier and CAGE code, and compliance with security clauses including safeguarding covered defense information, prohibition of Chinese telecommunications and surveillance equipment, and reporting of executive compensation. All offerors must meet U.S. citizenship or legal employment eligibility, pass NCIC and terrorist database screening, complete iWATCH anti-terrorism training, and adhere to strict physical security protocols including key control, badge identification, and prohibition of electronic recording devices. Proposals must be submitted by email to Wilma “Kat” Snider by 7:00 AM CST on August 6, 2026, and failure to comply with solicitation requirements will result in rejection. Payment will be processed exclusively through WAWF using the DoDAAC W81T9R, and the Contracting Officer’s Representative is Anthony Pickering, based at Eglin AFB.

Security Systems Services (except Locksmiths)

POSTED

DEADLINE

Lighter Knot Timber Sale - Eglin AFB, FLThe U.S. Air Force Test Center’s Procurement Zone Installation Office at Eglin Air Force Base is soliciting a firm-fixed-price timber sale contract for the removal of approximately 11,938 tons of merchantable pine timber across 370 acres within designated harvest units 20P44, 24P05, 24P06, and 22N13. The contract, identified by solicitation number FA282326Q4008, is issued under NAICS code 113310 for logging and is unrestricted with full and open competition, although it is specifically eligible under the Women-Owned Small Business program. The winning offeror must pay the full bid amount upfront as a lump-sum payment prior to performance and provide evidence of at least $1 million in general and property damage liability insurance with the contract number referenced. Performance is limited to a 365-day period beginning upon contract execution, with all work conducted on military land subject to strict compliance with environmental regulations, including protection of endangered species such as the Red Cockaded Woodpecker, adherence to unexploded ordnance safety protocols, and observance of OSHA and AFOSH workplace standards. The contractor is responsible for providing all labor, equipment, transportation, and management necessary for harvesting, hauling, and documentation of timber removal, using certified weight scales and submitting daily crew coordination reports and weekly removal summaries. All quotations must be submitted electronically via email to Jared Dunn no later than 10:00 AM CST on August 27, 2026, using only the Standard Form 1449 and must include the unit price per ton, total contract amount, and net amount for CLIN 0001 with handwritten entries legible and properly signed in Blocks 17a and 30a–30c. The offeror must also include the attached Statement of Work, Pond Water Map, and Vicinity Map as part of the submission. Prior to commencing work, the contractor must attend a mandatory pre-performance conference within 14 days of award and submit a complete list of all haul vehicles and trailers with their state license plate numbers. Site visits are not officially scheduled but are strongly encouraged, and access to Eglin AFB requires prior coordination with Jackson Guard or Michael Kratz. Failure to meet any of these requirements, including insurance submission, vehicle list provision, or timely payment, renders the offer ineligible. The government will

POSTED

DEADLINE

Drone TargetsThis acquisition is a competitive Request for Quote (RFQ) issued under solicitation number FA2823-26-Q-0062 by the Air Force Test Center at Eglin AFB, Florida, for the procurement of drone targets and associated equipment under FAR Part 12 as supplemented by Department of War Class Deviations 2026-O0028, 2026-O0037, and 2026-O0041, which implement the Revolutionary FAR Overhaul. The requirement is a total small business set-aside under NAICS code 336411 with a size standard of 1,500 employees, meaning only firms certified as small businesses in SAM are eligible to respond; non-compliant submissions will be deemed non-responsive. The contract is a firm-fixed-price purchase order with no advance payments, and all offers must be submitted in U.S. dollars and in English. The items to be procured include ten drone targets, two ground control stations with mandatory Mission Planner® software, two paired hand controllers, one launch interface, and two days of flight training at the contractor’s facility. Delivery is FOB destination to Eglin AFB, Florida, with a 45-calendar-day performance period from the date of award, and all items must comply with MIL-STD-130 for Unique Item Identifier (UII) marking using two-dimensional Data Matrix symbology as defined by ISO/IEC 16022 and ISO/IEC 15434 format indicators. Technical acceptability is evaluated as a pass/fail criterion based on alignment with the Technical Requirement Document dated 06 July 2026 and a Supplier Performance Risk System (SPRS) rating of Blue, Purple, Green, White, Black, or Green Pending; all other ratings are unacceptable. Award will be made to the lowest priced, technically acceptable, and responsible offeror without trade-offs between cost and technical factors. Offerors must be registered in SAM and WAWF, and must submit their UEI and CAGE codes, point of contact details, warranty terms, delivery timeframe, and any price or discount information with their proposal. All representations and certifications must be included if not already in SAM, and no compensation will be provided for proposal preparation. Questions must be submitted by 12:00 PM CDT on 7 August 2026, and offers are due by 12:0

Aircraft Manufacturing

POSTED

DEADLINE