Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

VALVE PLATE ASSEMBL

Active
SPE8E8-26-T-4830Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of a Valve Plate Assembly identified by NSN 4130-00-830-7676 and Part Number 5H40-120A, with a quantity of 26 units to be delivered FOB origin within 167 days of contract award. The item is subject to strict packaging standards per MIL-STD-2073-1E, including specific preservation methods, wrapping materials, and unit container types, with all marking required to comply with MIL-STD-129 and no special marking codes applied. Delivery is directed to the DLA Distribution San Joaquin facility in Tracy, California, and inspection and acceptance occur at the destination. The contract prohibits any intentional introduction of mercury or mercury-containing compounds into the hardware except under narrowly defined exceptions such as functional uses in batteries, lighting, sensors, weapon systems, or chemically specified reagents, with portable mercury-containing devices requiring shockproof construction and secondary containment per NAVSEA 5100-003D. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled based on acquisition size and solicitation amendment dates. The purchase request number is 7017585202, unit price is $26.00, and total contract value is $676.00. The solicitation was issued under contract number SPE8E8-26-T-4830 with a response deadline of August 3, 2026, and is classified under NAICS code 333415. All materials must adhere to DoD unit of issue standards and government identification removal protocols for non-accepted supplies.

General Info

26 Valve Plate Assemblies, NSN 4130-00-830-7676, $26 each, FOB origin, deliver to Tracy CA, no mercury except exempt uses.

Agency

Department Of Defense → DLA DIST SAN JOAQUINView Agency

NAICS

333415 - Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment ManufacturingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(1)

SPE8E8-26-T-4830.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA DIST SAN JOAQUIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → DLA DIST SAN JOAQUIN
View Agency Profile
Office AddressUS
Contacts
Alexis Selby
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
VALVE PLATE ASSEMBL
VALVE PLATE ASSEMBLY
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CARRIER CORP
SYRACUSE NY
OKLAHOMA CITY OK
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
SAAB KOCKUMS AB KARLSKRONA A199N P/N 5143010137
CARRIER CORP 10855 P/N 5H40-120A
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017585202 0001 EA 26.000
NSN/MATERIAL:4130008307676
DELIVERY (IN DAYS):0167
DELIVER FOB: ORIGIN
SPE8E8-26-T-4830
SECTION B
PR: 7017585202 PRLI: 0001 CONT’D
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C
UNIT CONT:D3 OPI:O
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
Need Ship Date:01/18/2027 Original Required Delivery Date:05/07/2027
SPE8E8-26-T-4830 NSN/Part Number: 4130-00-830-7676 Quantity: 26 EA Purchase Request: 7017585202QTY: 26 Delivery: 167 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333415
New
DIBBS
CARTRIDGE, DEHYDRATORThe contract is for a dehydrator cartridge designed for use with refrigerant 134A, with a required quantity of 612 units to be delivered within 177 days from the contract award date, with delivery point at the origin and inspection and acceptance occurring at the destination. The item is classified as a critical application item with a non-extendable 24-month shelf life under Type I (Code M) requirements, and it must comply strictly with MIL-STD-2073-1E packaging standards, including specified preservation methods, materials, and packing codes. All packaging and marking must adhere to MIL-STD-129 with special marking code 24 indicating open availability for inspection or use, and palletization must follow DLA packaging requirements. Mercury or mercury-containing compounds are strictly prohibited in or on the item except for limited functional uses approved by NAVSEA, and portable devices containing mercury must have shockproof construction and secondary containment. The item is subject to comprehensive technical and quality requirements referenced from the DLA Master List, and covered defense information applies. Export control and hazardous materials shipping regulations must be followed per IP025 and DLAD procedural notes. The delivery destination is specified with a parcel post address in Tracy, California, and the required ship date is July 22, 2026, with the original delivery deadline set for May 12, 2027. The NSN is 4440013984573, and the contract identifies multiple qualified suppliers with their respective part numbers.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333415
New
DIBBS
DEHYDRATOR UNIT, NONThe item is a nonreactivating dehydrator unit, also known as a desiccator assembly, measuring 3.630 inches in length, comprised of a cover, screw cap, and connecting tube. The desiccant used must be blue, Type IV, Grade H, conforming to MIL-D-3716 specifications. The procurement is governed by the Defense Logistics Agency’s packaging requirements and is subject to Cybersecurity Maturity Model Certification Level 2 compliance, requiring the vendor to be a certified third-party assessment organization. Technical data associated with this item is controlled under export regulations, either ITAR or EAR, and its disclosure to foreign persons, regardless of location, is strictly prohibited without prior authorization from the U.S. Department of State or Department of Commerce. DFARS 252.225-7048 applies, and access to this data is restricted solely to DLA contractors with approved U.S./Canada Joint Certification Program status, who have completed mandatory training and the DLA export-controlled data questionnaire. The item’s NSN is 4440-00-858-6010, with a quantity of nine units included in Purchase Request 7017585208. Delivery is due within 167 days after award. The solicitation number is SPE8E9-26-T-3207, with a response deadline of August 3, 2026, and the procurement falls under NAICS code 333415. The contracting office is the Department of Defense’s Construction & Equipment MRO Service I, with performance located at Tinker Air Force Base, 73145-8000. Primary point of contact is Matthew Kruc, reachable via email and phone.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333415
New
DIBBS
COVER, AIR CONDITIONERThe contract pertains to the procurement of 33 air conditioner covers identified by NSN 4130-01-618-4810 and part number 500K4486, supplied by HDT Expeditionary Systems Inc. The unit price is $33.00 per unit, totaling $1,089, with delivery required within 53 days after order placement under FOB origin terms. All items must be packaged in strict compliance with ASTM D3951, though any conflicting requirements from the DLA Master List of Technical and Quality Requirements take precedence. Packaging and labeling must adhere to MIL-STD-129, including palletization as specified in RP001, and all units are to be marked with the correct Unit of Issue and Quantity per Unit Pack. Inspection and acceptance occur at the destination point, with zero tolerance for quantity variance. The delivery destination is DLA Distribution Red River, Building 499, in Texarkana, Texas, with a required ship date of September 26, 2026, and an original delivery deadline of April 1, 2027. Transportation and shipping instructions follow DLAD Proc Notes C19 and C20. The solicitation is a total small business set-aside under NAICS code 333415, issued under contract number SPE8E8-26-T-4831, with responses due by August 3, 2026. Government identification must be removed from all non-accepted supplies, and covered defense information provisions may apply.
RED RIVER RECEIVING BLDG

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333415
New
DIBBS
CONNECTOR, AIR DUCTThe contract is for the procurement of 12 units of an air duct connector with NSN 4130-01-126-1760, issued under solicitation SPE8E8-26-T-4778 by the Department of Defense through the DDSP New Cumberland Facility. Delivery is required within 167 days from the contract award date, with a specified ship date of January 18, 2027, and an original required delivery date of January 1, 2027. The product must be delivered FOB origin with zero variance in quantity and is subject to inspection and acceptance at the destination. Packaging and labeling must comply with MIL-STD-129 and ASTM D3951, but DLA Master List of Technical and Quality Requirements take precedence over ASTM standards. Palletization must adhere to RP001 DLA Packaging Requirements for Procurement. The unit of issue is each, at a price of $12.00 per unit for a total contract value of $144.00. The item is sourced from approved suppliers American Turbo Systems Inc and Chase Supply Inc with respective part numbers. All shipments must be sent to the designated DLA distribution facility in New Cumberland, Pennsylvania, and transportation instructions are governed by DLAD Proc Notes C19 and C20. Failure to remove government identification from non-accepted supplies is prohibited, and covered defense information protocols apply. The solicitation was posted on July 22, 2026, with responses due by August 3, 2026.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333415
New
DIBBS
DRIER, AIR-GAS, DESICCAN
DEPOT OKLAHOMA

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333415
New
DIBBS
MANIFOLD, CHARGING AThe contract pertains to the procurement of a MANIFOLD, CHARGING A with NSN 4130-00-814-0142 and part number AC855, under solicitation SPE8E8-26-T-4780, with a quantity of 26 units at a unit price of $26.00, totaling $676.00. Delivery is required FOB origin within 167 days of contract award, with a required ship date of January 18, 2027, and original delivery deadline of October 12, 2026. Inspection and acceptance occur at the destination, and packaging must comply with ASTM D3951 and MIL-STD-129, with palletization adhering to DLA’s RP001 packaging requirements. All DLA Master List of Technical and Quality Requirements supersede any conflicting standards. The item must not contain intentionally added mercury or mercury compounds except in specific exempted uses such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemicals designated by NAVSEA; portable mercury-containing devices must be shockproof and include a secondary containment per NAVSEA 5100-003D. The delivery address is DLA DIST SAN JOAQUIN, REC WHSE 57, Tracy, CA 95304-5000. Transportation and freight specifications follow DLAD PROC NOTES C19 and C20. The contract enforces zero variance in quantity, and the unit of issue is each (EA). Technical and quality requirements are governed by the DLA Master List effective on the solicitation issuance date, with designated points of contact and compliance obligations outlined for the supplier.
DLA DIST SAN JOAQUIN

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333415
New
DIBBS
CRANKSHAFT, COMPRESSThe contract is for the procurement of seven crankshafts, compressed, identified by NSN 4130-00-391-8811 and part number 5H40-562, under solicitation SPE8E8-26-T-4782. Delivery is required within 167 days of award, with shipment FOB origin and inspection and acceptance occurring at the destination warehouse in Tracy, California. The unit of issue is each, with a fixed quantity of seven units at a unit price of $7.00, totaling $49.00. Packaging must comply with MIL-STD-2073-1E, using prescribed methods, materials, and codes, with marking adhering to MIL-STD-129 and no special markings required. Plastic materials for wrapping, cushioning, or dunnage are to be avoided whenever contractually permissible. The item is designated as a critical application item, and the use of mercury or mercury-containing compounds is strictly prohibited except in enumerated functional components such as batteries, fluorescent lights, and specific instruments or sensors as defined by NAVSEA, with additional containment requirements for portable devices. Technical and quality requirements referenced through R and I numbers are governed by the DLA Master List, with the applicable revision determined by the solicitation or award date. The supplier must comply with DLA packaging, marking, and transportation directives, including DLAD Proc Notes C19 and C20, and ship to the specified postal address. The solicitation was posted on July 22, 2026, with responses due by August 3, 2026, and the original required delivery date is October 9, 2026, with a need ship date of January 18, 2027. Point of contact is Alexis Selby, with the contract managed by the Department of Defense through DLA District San Joaquin under NAICS code 333415.
DLA DIST SAN JOAQUIN

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333415
New
DIBBS
LOW PRESSURE AIR METhe contract pertains to the procurement of two units of a low pressure air membrane dehydrator designated by NSN 4460-01-463-0649 under solicitation SPE8E8-26-T-4803, with a required delivery within 167 days from the contract award. Delivery is FOB origin, with inspection and acceptance occurring at the destination, and packaging must strictly comply with MIL-STD-2073-1E and MIL-STD-129 standards, including specific preservation methods, wrapping, and palletization per DLA requirements. The item must not contain or come into direct contact with mercury or mercury-containing compounds except for approved functional uses such as batteries, fluorescent lights, sensors, or weapon systems as defined by NAVSEA, with portable mercury-containing devices requiring shockproof construction and secondary containment. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and procurement falls under simplified acquisition rules where the revision in effect on the solicitation issue date controls. The contracting office is the DDSP New Cumberland Facility, and shipping instructions direct delivery to a specific address in New Cumberland, Pennsylvania. The required ship date is January 18, 2027, with an original delivery deadline of October 19, 2026, and the buyer must coordinate any casting or forging needs through DLA’s designated assistance portal. The contract includes covered defense information protocols and specifies no special marking beyond standard compliance.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333415
New
DIBBS
FILTER ELEMENT, AIRThis contract pertains to the procurement of 40 units of an air filter element with NSN 4130-01-602-1062 and part number 218072992, issued by the Defense Logistics Agency Dist San Joaquin under solicitation SPE8E8-26-T-4821. The requirement specifies delivery within 167 days to the designated receipt warehouse in Tracy, California, with FOB origin terms and no tolerance for quantity variance. The filter element must conform to the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, and all packaging must comply with MIL-STD-2073-1E and MIL-STD-129 standards, including specific packaging methods, containment materials, and marking protocols. Palletization and shipping must adhere to DLA packaging requirements, and the item must be shipped without government identification if not accepted. The contract prohibits the intentional addition of mercury or mercury-containing compounds in direct contact with the hardware, except for specified functional uses such as batteries, lighting, instruments, sensors, controls, weapon systems, or approved chemical reagents; portable devices containing mercury must be shockproof and include a secondary containment layer in accordance with NAVSEA 5100-003D. The unit of issue is each, with a unit price of $40.00, totaling $1,600.00, and the original required delivery date was November 5, 2026, with a needed ship date of January 18, 2027. The contract includes transportation directives and a point of contact for inquiries, with compliance governed by the revision of technical requirements in effect on the solicitation issue date.
DLA DIST SAN JOAQUIN

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333415
New
DIBBS
COOLING COIL, AIR, DUCTThe contract specifies the procurement of six duct-type air cooling coils identified by NSN 4130012246431 and part numbers 1336D00, 1336D01, and 4W8-31-5611T from Engineered Coil Company, with delivery required within 167 days of contract award, no later than January 30, 2027. The items must be shipped FOB origin under MIL-STD-2073-1E packaging standards with compliance to MIL-STD-129 marking, and palletization must adhere to DLA’s procurement packaging requirements. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at the destination point. Zero variance in quantity is permitted, and all units must be free of intentionally added mercury or mercury-containing compounds except for specific functional uses outlined in NAVSEA 5100-003D, including portable lamps and instruments that must include shockproof design and secondary containment. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation issue date. Source Approval Requests require documentation per RC001, and the product is classified as a Critical Application Item. The contract falls under NAICS code 333415 with the DLA as the administering agency, and all documentation must align with the Defense Logistics Agency’s authorized unit of issue and procurement protocols.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333415
New
DIBBS
HEAT EXCHANGER
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333415
New
DIBBS
IMPELLER, FAN, AXIAL
LAND SUPPLIER OPNS ENGINES

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → DLA DIST SAN JOAQUIN

Same awarding agency

New
DIBBS
LIFE PRESERVER, VESTThe contract specifies the procurement of 2,300 life preserver vests, identified by NSN 4220-01-113-8665, under solicitation SPE8E6-26-Q-0584, issued by the Defense Logistics Agency Dist San Joaquin. This is a critical safety item designated by the Air Force, requiring strict adherence to all technical and quality standards, including SAE AS9100 for manufacturers and non-manufacturers. All items must be marked in accordance with MIL-STD-129, including the contractor’s and actual manufacturer’s CAGE codes, part number, lot number, and serial number if available. The vests are classified as a critical application item, and no waivers or deviations are permitted without explicit approval from the DSC contracting officer. The contract imposes a firm fixed price with zero variance in quantity, and inspection and acceptance occur at origin. Delivery is required within 90 days after award date, with packaging compliant to MIL-STD-2073-1E and special handling procedures for hazardous materials as outlined in STO ZD072. Compliance with updated federal hazard communication standards is mandatory, requiring suppliers to provide Safety Data Sheets (SDS) and labels conforming to 29 C.F.R. 1910.1200, replacing prior MSDS requirements. Suppliers must also ensure employee training on these updated hazardous communication protocols. Documentation for source approval, inspection, and removal of government identification from non-accepted items must be submitted per specified requirements. The item is governed by multiple referenced technical data packages, including revisions tied to CID A-A-50652, QAP 13873, and drawing number 98752 200415485. The delivery destination is the DLA warehouse in Tracy, CA, and all shipments must align with DLA transportation procedures. The contract was posted on July 22, 2026, with proposals due August 3, 2026, and the material is needed no later than July 27, 2026, for federal use.

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333413
New
DIBBS
FAN, CENTRIFUGALThe contract is for the procurement of 11 centrifugal fans under NSN 4140-01-174-4368 and part number C7V181Q-8CC, issued by DLA Dist San Joaquin under solicitation SPE8E7-26-T-3376. The requirement mandates strict adherence to DLA’s technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with packaging governed by MIL-STD-2073-1E and MIL-STD-129 for marking, while prohibiting plastic wrapping, cushioning, or dunnage wherever permissible. Delivery is FOB origin, with inspection and acceptance occurring at the destination warehouse in Tracy, CA, and the goods must be delivered within 167 days of contract award, with an original required delivery date of December 24, 2026, and a need ship date of January 18, 2027. The unit of issue is each, with a fixed unit price of $11.00 and zero tolerance for quantity variance. The contract incorporates all applicable DLA packaging and documentation requirements, including the removal of government identification from non-accepted supplies and compliance with specified unit of issue codes. Packaging must align with RP001 and palletization standards, with no special marking required beyond standard MIL-STD-129 compliance. Transportation instructions reference DLAD Proc Notes C19 and C20, and the consignee address is clearly defined for delivery. The solicitation was posted on July 22, 2026, with a response deadline of August 3, 2026, under NAICS code 333413 for industrial machinery manufacturing. The primary point of contact is Kelly Mitchell of DLA, reachable by phone or email, and all technical and quality clauses are bound by the version of the DLA Master List in effect on the solicitation issue date.
Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326111
New
DIBBS
EXTINGUISHER, FIREThe contract requires the procurement of 84 fire extinguishers under NSN 4210016083387 and part number 429011, supplied by TYCO FIRE PRODUCTS LP, with a unit price of $84.00 and a total value of $7,056. Delivery is due within 37 days after contract award, with FOB destination and no variance allowed in quantity. Inspection and acceptance occur at the destination warehouse in Tracy, California, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including palletization per DLA packaging standards and special marking requirements. Hazardous materials handling is governed by OSHA’s updated Hazard Communication Standard effective June 1, 2015, requiring suppliers to submit Safety Data Sheets and compliant labels following 29 C.F.R. 1910.1200, along with employee training on these requirements. The supplier must also adhere to DLA’s technical and quality requirements referenced via the DLA Master List, and shipping instructions must follow DLAD Proc Notes C19 and C20. The required delivery date is November 11, 2026, with a need ship date of July 26, 2026, under solicitation SPE8E6-26-T-3812, issued by the Department of Defense through DLA District San Joaquin, and point of contact is John Lieb.
Plastics Bag and Pouch Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333413
New
DIBBS
FAN, TUBEAXIALThe contract pertains to the procurement of a tube axial fan with part number LT-2001589-00 and NSN 4140017003000, under solicitation SPE8E7-26-T-3395, with a required delivery of ten units within 113 days from the contract date. The purchase order price is $10.00 per unit, totaling $100.00, and the delivery terms are FOB origin with no variance permitted in quantity. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including specific preservation methods, wrapping, and unit containerization. Marking must adhere to MIL-STD-129 with no special marking codes applied. The delivery destination is the DLA Distribution San Joaquin warehouse in Tracy, California, with the same address used for freight shipping. The contract references technical and quality requirements from the DLA Master List, with provisions for document control based on acquisition type and amendment dates. The solicitation was issued on July 22, 2026, with responses due August 3, 2026, under NAICS code 333413 for industrial fan manufacturing, and the primary point of contact is Kelly Mitchell at DLA Dist San Joaquin.
Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333413
New
DIBBS
IMPELLER, FAN, AXIALThis contract specifies the procurement of one axial fan impeller with part number 505551-1503 and NSN 4140-01-421-3618 under solicitation SPE8E7-26-T-3382, issued by the Defense Logistics Agency Distribution San Joaquin. The item must be delivered in a single unit within 167 days from the date of award, with delivery terms set at FOB origin and inspection and acceptance occurring at the destination warehouse in Tracy, California. All packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including marking in accordance with MIL-STD-129, and must be palletized as specified. No mercury or mercury-containing compounds may be intentionally added to the product or come into direct contact with it, except for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemicals explicitly authorized by NAVSEA, with portable devices containing mercury requiring shockproof design and secondary containment. The contract incorporates all referenced technical and quality requirements from the DLA Master List of Technical and Quality Requirements, and the revision in effect at the solicitation issue date governs compliance. The unit of issue is each, the price is specified per unit, and the total contract value is based on the single unit quantity. The supplier must meet all special handling, packaging, and labeling guidelines, and the delivery must be completed no later than January 18, 2027, with the original required delivery date set for May 21, 2027. All transportation and shipping instructions must follow DLAD procedural notes C19 and C20, and the point of contact for inquiries is Kelly Mitchell of the DLA.
Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335132
New
DIBBS
LIGHT, TRAFFIC, AIRCR
Commercial, Industrial, and Institutional Electric Lighting Fixture Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332913
New
DIBBS
FAUCET, DOUBLE
Plumbing Fixture Fitting and Trim Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339113
New
DIBBS
LIFE PRESERVER, UNDEThis contract is for the procurement of 81 units of the UNDERARM LIFE PRESERVER, identified by NSN 4220-01-524-5323 and part number TFSS-5326-C/GN, supplied by PECI FLOATATION LLC. The item is classified as a commercial product and must comply with all technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 standards, with specific packaging codes and hazardous material handling procedures outlined in RP001 and IP025, including special requirements tied to STO ZD072 for hazmat. The delivery is FOB destination with no variance allowed in quantity, and the contract requires delivery within 58 days to the designated receiving warehouse in Tracy, California. All hazardous materials associated with this item must be accompanied by Safety Data Sheets formatted in compliance with 29 C.F.R. 1910.1200 and OSHA’s Globally Harmonized System, along with approved HCS labels. Suppliers are required to train employees on these regulations and must not include asbestos as defined in FED-STD-313 or intentionally add mercury or mercury-containing compounds, except for specified functional uses in batteries, instruments, or weapon systems, where secondary containment and shockproofing are mandatory per NAVSEA 5100-003D. The contract mandates submission of documentation for source approval, and all supplies must eliminate government identification if rejected. The original required delivery date is October 31, 2026, with a need ship date of March 27, 2026, and the solicitation closed on August 3, 2026.
Surgical Appliance and Supplies Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332111
New
DIBBS
ANGLE, STRUCTURALThis contract specifies the procurement of structural steel angle shapes with exact dimensions of 3.000 inches in height and width, 0.375 inches in thickness, and lengths ranging from 30 to 40 feet, weighing approximately 7.200 pounds per foot. The material is identified as steel UNS K02600 and must comply with ASTM A6 Table A2.7 for equal-legged L-shapes, with all requirements aligned to ASTM A6/A6M-24B and ASTM A36/A36M-19. Material must be supplied in whole-foot lengths only and marked with continuous identification including the DLA contract delivery order number, NSN, specification revision, alloy details, manufacturer name, heat and lot numbers, and dimensions. Markings must be legible, waterproof, and applied via stamping or stenciling without contamination, and adhesive labels are required for items under 0.250 inches nominal OD. Certification of quality compliance, including mill material certification, is mandatory with each shipment, and copies must be forwarded to the DLA Troop Support Contracting Officer. The procurement is governed by strict compliance with the Qualified Suppliers List for Distributors (QSLD), permitting only suppliers listed on the official QSLD to be considered for award; any deviation constitutes an exception and must be explicitly declared. The government waives source inspection requirements for qualified suppliers, and failure to comply with QSLD terms may result in criminal penalties. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129R, with special codes Z and ZZ as defined by ASTM A700, and palletization must meet DLA packaging requirements. The item is designated a critical application, and the total quantity is 768 linear feet to be delivered within 69 days FOB origin to Tracy, CA, with a permitted quantity variance of plus or minus 10 percent. The contract references multiple technical data packages and quality assurance protocols, including CDRL-METALSCERT, and requires strict adherence to all DLA procurement notes and technical requirements as published in official DLA documentation.
Iron and Steel Forging

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333992
New
DIBBS
ELECTRODE, WELDINGThe contract specifies the procurement of welding electrodes conforming to AWS A5.10 ER5356 specifications, with a nominal diameter of 0.030 inches, supplied on 1-pound rolls, packaged horizontally, and designed for direct current reverse polarity shielded arc welding. The item is identified by NSN 3439-00-892-4382 and a unit of issue of RL, with a total quantity of 307 rolls required. The product is classified as a commercial item and is procured under a military specification without shelf life restrictions. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, and packaging must comply with DLA standards. The material must not contain intentionally added mercury or mercury compounds, except for specific exempted uses such as batteries or instruments, and any portable devices containing mercury must meet shock-proof and secondary containment criteria per NAVSEA 5100-003D. All hazardous materials supplied must be accompanied by Safety Data Sheets compliant with OSHA’s revised Hazard Communication Standard, including GHS-aligned labeling, and suppliers are required to submit both SDS and labels for contracting officer approval prior to award. Employee training on the updated hazard communication standards is mandatory. The contract solicitation number is SPE8E5-26-T-3670, issued by DLA Dist San Joaquin, with a response deadline of August 3, 2026, and delivery expected within 167 days after order. The place of performance is Tracy, California, 95304-5000, and the primary point of contact is Ira Hedgepeth.
Welding and Soldering Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details