Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Vehicle Recompete: Idc N3943022D2401

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This Indefinite Delivery Contract, managed by the Navfac Systems and Experimental Warfare Center under the Department of Defense, focuses on the fabrication of fleet mooring chain and accessories. The vehicle has an IDV ceiling of 25 million dollars and an ordering period that extends through June 6, 2027. No specific set-aside was used for this procurement. While there are currently no active task orders valued at zero dollars, previous activity includes a 250,000 dollar order awarded to Lister Chain and Forge Inc. The contract is classified as likely to be recompete with a medium confidence level, and the original solicitation was listed as N3943021R2303.

General Info

DoD contract for fleet mooring chains and accessories, $25M ceiling, through June 2027.

Agency

Department Of Defense → Navfac Systems And Experimental Warfare Ctr

NAICS

332111 - Iron and Steel Forging

Place of Performance

Not specified

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedDec 6

pre-forecast

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Navfac Systems And Experimental Warfare Ctr

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Navfac Systems And Experimental Warfare Ctr

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Idc vehicle N3943022D2401 ordering period ends 2027-06-06T00:00:00.000Z. 0 active task orders valued at $0.
Fabrication of fleet mooring chain and accessories Original Solicitation: N3943021R2303 IDV Ceiling: $25,000,000 Set-Aside: No set aside used. Contracting Office: Navfac Systems And Experimental Warfare Ctr Agencies: Department of Defense Classification: recompete-likely (Confidence: medium - 45/100)
Top task orders by value: - FLEET MOORING CHAIN AND ACCESSORIES ($250,000) - LISTER CHAIN & FORGE INC

Similar Contracts

Same NAICS industry code

Supply of Forging-Grade Aerospace AlloyThis subcontract involves the supply of raw forging-grade aerospace alloy to prime contractors supporting DLA Weapons Support ASC projects for the Department of Defense. The scope of work requires the delivery of certified raw material in the form of billets or pre-forms that strictly adhere to the specifications outlined in Drawing NR 81205 65-18455. To ensure quality and compliance, the provider must furnish all necessary Material Test Reports and Certificates of Conformance. The project is managed under NAICS code 332111 and is associated with the DLA Weapons Support ASC Supplier Oper AE and AF Div. Performance of the contract is centered at Tinker AFB, zip code 73145-8000. Interested parties should note the response deadline of November 5, 2026, following the posting date of October 28, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 7 hours ago

DEADLINE

Aerospace Casting and Forging for Drag Brace NutThis subcontract involves the production and supply of 44 certified raw forged or cast blanks for Drag Brace Nuts, supporting prime contractors on projects for the DLA Weapons Support ASC Supplier Oper OEM Division. The scope of work requires the use of aerospace-grade alloys to perform near-net shape casting or forging specifically for part number 204-011-144-003. The selected provider must ensure strict adherence to quality standards by providing comprehensive material certification, full traceability, and Source Approval Request documentation. Performance for this Department of Defense contract will take place in New Cumberland, Pennsylvania, under NAICS code 332111.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 7 hours ago

DEADLINE

ADAPTER, HOISTING

Solicitation # SPE8EE-27-T-0282

Solicitation SPE8EE-27-T-0282 is a request for quotation issued by DLA Troop Support, Construction & Equipment Manu & Con for the procurement of one hoisting adapter, identified by NSN 3940-01-122-8976. The contract is categorized under NAICS code 332111 and utilizes First Destination Transportation to optimize shipping costs. The required delivery date is July 20, 2027, with a need ship date of April 26, 2027, and a delivery period of 167 days after the order is placed. Delivery is FOB Origin, with inspection and acceptance occurring at the destination, specifically DLA Distribution Red River in Texarkana, Texas. The procurement incorporates stringent quality and technical standards, including the DLA Master List of Technical and Quality Requirements and ISO 9001:2015 compliance for manufacturers. Specific packaging must adhere to ASTM D3951 and MIL-STD-129, with palletization following RP001 requirements. Cybersecurity compliance is mandated via CMMC Level 2 Self-Assessment and the application of covered defense information protocols. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. Additionally, the solicitation applies the Buy American Act and Berry Amendment for domestic sourcing and allows for a HUBZone price evaluation preference.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 7 hours ago

DEADLINE

ARMOR CMPST PANEL

Solicitation # SPE8E4-27-T-0173

Solicitation SPE8E4-27-T-0173 is a request for quotations for the procurement of 40 composite armor panels, identified by NSN 9535015692367. The contract is issued by DLA Troop Support, Construction and Equipment (Metals), with delivery required within 190 days of award. The need ship date is May 19, 2027, with an original required delivery date of May 31, 2027. Shipping is designated as FOB Origin, and the items are to be delivered to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Inspection and acceptance will take place at the destination. Strict packaging and marking requirements are mandated, requiring each armor panel to be individually packaged in a wooden box with sufficient cushioning and dunnage material to prevent movement, adhering to MIL-STD-2073-1E and MIL-STD-129. Palletization must comply with DLA requirement RP001. The contractor must utilize the Wide Area WorkFlow system for electronic invoicing and payment. Compliance requirements include CMMC Level 2 self-assessment, safeguarding of covered defense information under DFARS 252.204-7012, and adherence to the Buy American Act and Berry Amendment for domestic material restrictions.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 7 hours ago

DEADLINE

Aerospace-Grade Raw Material SupplyThis subcontract for Aerospace-Grade Raw Material Supply involves providing raw metal stock, forgings, or castings to prime contractors for the production of Valve Bodies under Department of Defense DLA supply contracts. The performance of this contract takes place in Cherry Point, and all supplied materials must strictly adhere to the Buy American Act and the Berry Amendment. A critical requirement of the agreement is the provision of full traceability for all raw materials. This includes the mandatory submission of Material Test Reports and Certificates of Conformance, particularly for items designated as Critical Safety Items. The solicitation was posted on October 27, 2026, with a response deadline of November 9, 2026.

CHERRY POINT PHANTOM RD BLDG

POSTED

DEADLINE

PIN, STRAIGHT, HEADED

Solicitation # SPE4A6-27-T-5009

Solicitation SPE4A6-27-T-5009, issued by the DLA Weapons Support ASC Commodities Division, is a fixed-price request for 178 each of straight headed pins, identified as NSN 5315-01-334-3810. This is designated as a critical application item and must be manufactured in accordance with non-government standards NASM20392 Revision 01 and NASM5673 Revision 1. The manufacturer's inspection system must comply with SAE AS9003 or ISO 9001 tailored to SAE AS9003. Sampling will be conducted per MIL-STD-1916, ASQ H1331, or a comparable zero-based plan, with acceptance requiring zero non-conformances. Delivery is required within 161 days after order, with FOB, inspection, and acceptance points all set at the origin. Supplies are to be delivered to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Packaging must adhere to ASTM D3951 and RP001, while marking and labeling must follow MIL-STD-129. The government will not evaluate or award to offers utilizing additive manufacturing. Key administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various DFARS and FAR clauses regarding cybersecurity, domestic sourcing, and the prohibition of covered telecommunications equipment.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE8E4-27-T-0076

Solicitation SPE8E4-27-T-0076 is a request for quotations issued by the Defense Logistics Agency Troop Support Construction and Equipment Metals office for the procurement of 48 metal bars, identified by NSN 9510015276320. These components, also described as long retaining rods without retaining rings, are intended for use in a Tactical Water Purification System. The procurement falls under NAICS code 332111 and requires the submission of quotes via the DIBBS system. Delivery is specified as FOB Origin with a required delivery date of March 22, 2027, and a need ship date of October 14, 2026, with a delivery window of 66 days after order. Inspection and acceptance will occur at the destination, specifically the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to technical and quality requirements, including Metal Certification Contract Data Requirements Lists and DD Form 1423s. Packaging must comply with ASTM D3951 and MIL-STD-129, though the DLA Master List of Technical and Quality Requirements takes precedence. Palletization must follow RP001 standards. Key regulatory requirements include compliance with the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow system. Offerors must be registered in the System for Award Management and are prohibited from using additive manufacturing processes unless specifically authorized.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Solicitation # SPE8E4-27-T-0095

Solicitation SPE8E4-27-T-0095 is a fixed-price request for quotations issued by the Defense Logistics Agency Troop Support Construction and Equipment for the procurement of 5 feet of cold drawn, annealed flat steel bars. The material must be 0.250 inches thick, 2.000 inches wide, and supplied in whole foot lengths between 6 and 20 feet. Delivery is required within 20 days after order, with inspection and acceptance occurring at the destination. The procurement is restricted to suppliers listed on the Qualified Suppliers List for Distributors, and a Certificate of Quality Compliance must accompany every shipment. The contract mandates strict adherence to technical and quality standards, including ASTM A681, ASTM A700, and MIL-STD-129 for marking. Required markings must be legible, waterproof, and include the contract delivery order number, NSN, and manufacturer details, with failure to comply serving as grounds for rejection. Packaging must follow MIL-STD-2073-1E and RP001 requirements. Administratively, the contract requires the use of the Wide Area WorkFlow system for invoicing and incorporates various DFARS and FAR clauses, including those regarding cybersecurity, the Buy American Act, and a price evaluation preference for certified HUBZone small businesses.

Defense Logistics Agency

POSTED

DEADLINE

GUIDE, CAM FOLLOWER, FO

Solicitation # SPE7L1-27-T-1579

This procurement, solicitation number SPE7L1-27-T-1579, is a total small business set-aside issued by the DLA Weapons Support Land Supply Chain for the acquisition of 149 units of Guide, Cam Follower, Folding Floor (NSN 5340-01-540-4920). The requirement is governed by NAICS code 332111 and specifies a need ship date of February 5, 2026, with an original required delivery date of April 7, 2027. Delivery is FOB Origin, with inspection and acceptance occurring at the destination, specifically DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to technical and quality standards, including TDP Rev D Gen 4 and specific Quality Assurance Provisions (QAP 13873 and QAP 16236). Quality compliance requires a Certificate of Quality Compliance and Metal Certification. Sampling must follow MIL-STD-1916 or ASQ H1331, with specific AQLs assigned to critical, major, and minor attributes. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements (RP001). Key regulatory requirements include the Buy American and Balance of Payments Program (DFARS 252.225-7001) and the Berry Amendment. Offerors must be registered in the System for Award Management (SAM) and utilize the Wide Area Workflow (WAWF) for electronic invoicing. All quotations must be submitted via the DLA Internet Bid Board System (DIBBS) by October 26, 2026. Additionally, the contract incorporates cybersecurity requirements under DFARS 252.204-7012 and prohibits the use of additive manufacturing unless specifically authorized.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE8E4-27-T-0088

Solicitation SPE8E4-27-T-0088 is a Request for Quotations issued by DLA Troop Support for the procurement of 294 feet of round metal bar. The material must be Steel Comp 304, hot finished and annealed, with a diameter of 1.250 inches and supplied in whole feet lengths between 10 and 12 feet. This is designated as a critical application item with a reference weight of 4.270 lb/ft. Delivery is required within 152 days after order, with a need ship date of March 28, 2027, delivered FOB Origin to the DLA Distribution Depot Oklahoma at Tinker AFB. Eligibility for award is strictly limited to suppliers listed on the Qualified Suppliers List for Distributors (QSLD) for FSGs 95 and 96. The contract mandates rigorous quality and identification standards, including the submission of a Certificate of Quality Compliance with every shipment. Continuous identification markings, including the contract delivery order number, NSN, and manufacturer details, must be applied using waterproof, legible methods per MIL-STD-129 and ASTM A700. Packaging must adhere to RP001 and MIL-STD-2073-1E. Inspection and acceptance will occur at the destination, and failure to comply with marking requirements is grounds for product rejection. Invoicing and payment must be processed electronically through the Wide Area Workflow system.

POSTED

DEADLINE

Solicitation # SPE8E9-27-T-0228

Solicitation SPE8E9-27-T-0228 is a request for quotations issued by DLA Troop Support for the procurement of 232 feet of flat chrome-molybdenum (4130) steel bars. The material must be 0.250 inches thick and 2.00 inches wide, supplied in whole foot lengths between 10 and 12 feet. This is designated as a critical application item and must comply with technical standards SAE AMS-S-6758B Revision B and SAE AMS2806 Revision D. Delivery is required by May 23, 2027, with a need ship date of April 12, 2027, shipped FOB Origin to the DLA Distribution Depot Oklahoma at Tinker AFB. Eligibility for award is restricted to suppliers listed on the Qualified Suppliers List for Distributors (QSLD) or Manufacturers (QSLM). A Certificate of Quality Compliance (Mill-Material Certification) is mandatory for every shipment. Strict adherence to marking and packaging requirements is required, including compliance with MIL-STD-129 and ASTM A700; failure to provide legible, waterproof continuous identification markings—including the contract delivery order number, NSN, and heat/lot number—will result in the rejection of the product. Inspection and acceptance will occur at the destination, though source inspection is waived for approved QSL suppliers. The procurement incorporates various FAR and DFARS clauses, including the Buy American Act and Berry Amendment restrictions. Offers must be submitted via the DIBBS system. Payment will be processed electronically through the Wide Area WorkFlow (WAWF) system. A price evaluation preference is available for HUBZone Small Business Concerns, and the use of additive manufacturing for the produced items is prohibited unless specifically authorized.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Solicitation # SPE4A6-27-T-6963

Solicitation SPE4A6-27-T-6963 is a federal procurement issued by the DLA Weapons Support ASC Commodities Division for the acquisition of 69 units of spring pins, identified by NSN 5315-00-058-9765 and part number MS171560. The items are classified as critical application items and must be manufactured according to the current revision of part standard NASM171401 through 171900 (Revision 4) and reference drawing 13873 EI-000589765. Delivery is required by November 21, 2027, with a need ship date of May 14, 2027, and is established as FOB Origin. The shipping destination is DLA Distribution Cherry Point in North Carolina. The contract mandates strict adherence to DLA technical and quality requirements, including specific sampling methods per MIL-STD-1916 or ASQ H1331 and a prohibition on the intentional addition of mercury. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, while inspection and acceptance will occur at the point of origin. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses, including the Buy American Act, safeguarding of covered defense information, and prohibitions on certain telecommunications equipment. HUBZone small businesses may be eligible for price evaluation preferences.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → Navfac Systems And Experimental Warfare Ctr

Same awarding agency

U.S. Army Long Range Precision Munition Launched Effects Medium Range-Lethal Prototype Integration and Qualification

Solicitation # 11e09f87-099d-4282-abc4-f6a4ce589397

POSTED

about 7 hours ago

DEADLINE

USSF SLD 30: Integrated Development Planning and Environmental Readiness Process Prototype

Solicitation # 61fb4c07-b7d0-4646-987e-dbc1c624d7cf

Space Launch Delta 30 is seeking industry, academic, and non-profit partners to prototype an integrated development planning and environmental readiness process. The goal is to replace the Department of the Air Force's fragmented legacy planning system, which currently takes over nine months to produce low-fidelity concepts, with a unified methodology. This effort focuses on the creation of a repeatable business process rather than physical construction or facility delivery. The objective is to utilize agile design charrettes and concurrent environmental analysis to compress the planning lifecycle, aiming to produce a high-fidelity 30% to 35% conceptual planning package and complete environmental documentation in under five months. This multi-phase prototype begins with Phase I, focusing on Small-Scale Project Process Prototype support for SLC-9. The final deliverable is a government-owned Technical Data Package that codifies this accelerated planning process.

Environmental Consulting Services

POSTED

DEADLINE

Tactical ISR Processing, Exploitation and Dissemination (PED): Adaptive AI and Autonomy at the Tactical Edge

Solicitation # 1f829fd0-4f36-4a90-a3b7-d05d41483223

The National Geospatial-Intelligence Agency is seeking prototype solutions under an Other Transaction Authority vehicle to develop edge-deployable computer vision capabilities for unclassified small unmanned aerial systems. The primary goal is to enable sustained tactical intelligence, surveillance, and reconnaissance operations in contested and austere environments where connectivity is limited. By focusing on object detection, tracking, and re-identification, the project aims to eliminate the current dependency on enterprise cloud infrastructure for model retraining, allowing warfighters to maintain continuous custody of objects of interest. The required solution must utilize low-shot learning approaches, enabling operators with minimal coding expertise to adapt models at the point of need using limited labeled data on size, weight, and power constrained hardware. Success will be measured by specific precision, recall, and F1 thresholds, as well as the ability to re-identify objects after a loss of custody. To ensure operational utility, the prototype must integrate with standard GEOINT data formats, REST API architectures, and tactical dissemination systems such as the TAK ecosystem.

Computer Systems Design Services

POSTED

DEADLINE

Development and Implementation of a Tactical Innovation Training Program for XVIII Airborne Corps Division

Solicitation # 86085f9a-9f52-4cb7-849f-ebf46cc5b296

The XVIII Airborne Corps is seeking a partner to co-develop and implement a comprehensive tactical innovation training program designed to operationalize innovation within Division innovation labs. The initiative aims to bridge a critical capability gap by establishing a formalized, scalable framework that empowers Soldiers to serve as tactical innovation officers. Participants will be trained in essential methodologies, including problem identification, experimentation, modernization pathways, defense acquisition, and program management, to ensure the organization can systematically solve complex operational challenges from the tactical level up. The required training program will consist of a blended learning approach, featuring approximately three to four months of remote instruction culminating in a mandatory in-person intensive scheduled for December 7-11. The selected partner must tailor the curriculum to align with specific organizational priorities and operational requirements, utilizing practical exercises and facilitation to ensure actionable results. The ultimate goal is to build a sustainable internal capacity for structured problem-solving that enhances mission effectiveness and maintains a competitive operational advantage.

Professional and Management Development Training

POSTED

DEADLINE

Fuel System RelocationThis subcontract involves the relocation of existing fuel infrastructure for prime contractors working on USACE Alaska District projects under the Department of Defense. The primary scope of work is the relocation of Pumphouse 3 Truck Fill Stand to make way for new facility construction, with the ultimate goal of delivering a fully operational stand. The project falls under NAICS code 238990 and requires specialized certification for the handling of active fuel lines and pumps. Interested parties should note the response deadline of October 29, 2026.

All Other Specialty Trade Contractors

POSTED

DEADLINE

in about 22 hours

Paving & Exterior Site ImprovementsThis subcontract for Paving and Exterior Site Improvements involves performing specialized exterior site work for prime contractors on USACE Alaska District projects under the Department of Defense. The scope of work includes paving organizational vehicle parking and vehicle inspection lanes, installing storm drainage systems, and erecting secure perimeter fencing and signage. All construction must adhere to strict cold-weather specifications to ensure durability in the local environment. The project falls under NAICS code 237310 and requires the delivery of fully completed parking facilities, drainage infrastructure, and secure fencing. Interested parties should note the response deadline of October 29, 2026, following the posting date of October 22, 2026.

Highway, Street, and Bridge Construction

POSTED

DEADLINE

in about 22 hours

Cold Climate HVAC & Mechanical SystemsThis subcontract opportunity, titled Cold Climate HVAC & Mechanical Systems, involves the installation of self-contained heating, ventilation, and air conditioning systems for prime contractors working on USACE Alaska District projects. The scope of work focuses on delivering fully operational climate control systems utilizing HVAC units specifically engineered for Climate Zone 7 extreme cold to guarantee continuous 24-hour all-weather operation. Managed under the Department of Defense with NAICS code 238220, the project was posted on October 22, 2026, with a response deadline of October 29, 2026. The contract ensures that critical infrastructure in extreme environments maintains necessary temperature controls through specialized mechanical installations.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

in about 22 hours

Electrical & Secure Communications SystemsThis subcontract for Electrical and Secure Communications Systems supports prime contractors on USACE Alaska District projects under the Department of Defense. The scope of work involves the installation of an operational electrical grid, including 480V forklift charging stations, and the establishment of a certified secure data network. Key technical requirements include the installation of NIPR and SIPR connectivity and the implementation of cybersecurity measures across four distinct platforms. Due to the sensitive nature of the SIPR installation, personnel are required to hold a Secret security clearance. The project falls under NAICS code 238210 and focuses on delivering critical infrastructure and secure communications capabilities. The solicitation was posted on October 22, 2026, with a response deadline of October 29, 2026.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

in about 22 hours

Plumbing & Environmental Water SystemsThis subcontract for Plumbing and Environmental Water Systems involves the installation of plumbing systems and specialized industrial water treatment equipment for prime contractors operating on USACE Alaska District projects. The primary scope of work includes the installation of an indoor wash rack and the integration of an oil-water separator system, ensuring all components are fully operational and compliant with EPA and Army regulations. Managed under the Department of Defense with NAICS code 238220, the project focuses on delivering a complete vehicle wash rack and environmental water management system. Interested parties should note the response deadline of October 29, 2026, to provide services for this specialized infrastructure requirement.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

in about 22 hours

Industrial Flooring & Material Handling InstallationThis subcontract involves the installation of heavy-duty industrial flooring and specialized material handling systems for prime contractors operating on USACE Alaska District projects. The scope of work specifically requires the installation of a rollerized scale designed for a three-pallet train along with 463L pallet storage racks. The primary objective is to deliver a fully operational rollerized scale and completed pallet racking systems. This Department of Defense project falls under NAICS code 238990 and was posted on October 22, 2026, with a response deadline of October 29, 2026.

All Other Specialty Trade Contractors

POSTED

DEADLINE

in about 22 hours

Site Preparation & Environmental RemediationThis subcontract opportunity with the Department of Defense focuses on site preparation and environmental remediation for USACE Alaska District projects. The scope of work involves performing site clearing, grading, and soil remediation, specifically targeting the excavation and removal of contaminated soil from previously developed lands. Additionally, the contractor will be responsible for site grading for parking areas and vehicle inspection lanes, ensuring the delivery of certified clean building pads and site access roads. The project falls under NAICS code 562910 and is structured as a subcontract for prime contractors. Interested parties should note the response deadline of October 29, 2026. The work is centered on providing essential infrastructure readiness and environmental cleanup to meet federal standards for military installations in the Alaska District.

Remediation Services

POSTED

DEADLINE

in about 22 hours

Architectural & Engineering (A&E) Design ServicesThis subcontract for Architectural and Engineering Design Services supports prime contractors on military facility projects within the USACE Alaska District. The scope of work involves providing full design services, including site planning and detailed engineering specifically tailored for cold climate facilities in Climate Zone 7. Key technical requirements include the integration of sustainability measures, building information systems, and both NIPR and SIPR connectivity. The selected provider will be responsible for delivering comprehensive final design packages, construction documents, and BIM models. This Department of Defense opportunity falls under NAICS code 541330 and requires a response by October 29, 2026.

Engineering Services

POSTED

DEADLINE

in about 22 hours

Earlier notices in this NAICS code

Posted before this notice, open and closed

Solicitation # W911S226U2275

W6QM Micc-Ft Drum

POSTED

CLOSED

47--TUBE,METALLIC

Solicitation # SPE7L326T2374

DLA Land And Maritime

POSTED

DEADLINE

Breech Ring Forgings for the Watervliet Arsenal

Solicitation # W911PT26QA021

POSTED

CLOSED

31--BUSHING,SLEEVE

Solicitation # SPE4A626U0691

POSTED

CLOSED

17--STRIP,SEALING

Solicitation # SPE7M226Q0143

DLA Land And Maritime

POSTED

CLOSED

95--CHANNEL,STRUCTURAL

Solicitation # SPE8E926T0390

DLA Troop Support

POSTED

DEADLINE

31--BUSHING,SLEEVE

Solicitation # SPE4A626U0462

POSTED

CLOSED

Solicitation # SPE8E426T0331

DLA Troop Support

POSTED

DEADLINE

Stainless Steel Forging Qualification Test Articles

Solicitation # N0016726Q0003

POSTED

CLOSED

Final Qualification Test Article Delivery

POSTED

CLOSED

Forging of XM-19 Qualification Test Article

POSTED

CLOSED

Precision Casting and Machining of Diesel Engine Blocks

DLA Land Warren

POSTED

CLOSED

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS