This Government Contract opportunity from Department Of Defense was posted on July 22, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Vessel Organizational & Intermediate Maintenance Services

Closed

Federal

Submission Closed08/08/2026, 12:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811310

New

SLED

Bus Fire Suppression System Maintenance

Solicitation # WMATA-0000010906

The Washington Metropolitan Area Transit Authority is seeking proposals for the maintenance of bus fire suppression systems under solicitation number WMATA-0000010906. This procurement falls under NAICS code 811310 and is managed by the agency's Virginia operations. The solicitation was posted on October 29, 2026, with a strict response deadline of November 4, 2026. Interested parties must submit their bids through the official supplier portal by the specified cutoff time to be considered for the contract.

Washington Metropolitan Area Transit Authority

POSTED

DEADLINE

Kubota M8200 Clutch Replacement

Solicitation # kubota-m8200-clutch-replacement

Management & Training Corporation (MTC) is soliciting bids for the clutch replacement of a Kubota M8200 tractor with front wheel assist, no cab or loader, located at the Earle C. Clements Job Corps Center in Morganfield, Kentucky. The contractor is responsible for providing all transportation, labor, supervision, tools, and new manufacturer-specified parts required to diagnose and repair the clutch assembly and power take-off (PTO) system. The scope of work includes disassembling the tractor, replacing friction discs, bearings, oil seals, and O-rings, resurfacing the flywheel, and replacing necessary hydraulic pipes and filters. Final acceptance is contingent upon the Facility Maintenance Department verifying proper clutch engagement and PTO operation under load. This solicitation is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certified firms. Interested bidders must submit a bid sheet, a completed supplier packet including IRS Form W-9 and self-certification, and proof of insurance to Angie Mahoney by November 3, 2026, at 3:00 PM CST. Award will be based on best value. The contract is subject to various federal regulations, including Service Contract Labor Standards under Wage Determination No. 2015-4687 Revision 31 for Kentucky, and FAR clauses regarding equal opportunity, combating trafficking in persons, and restrictions on foreign purchases.

Earle C. Clements Job Corps Center

POSTED

DEADLINE

SMDOT Elevator Maintenance

Solicitation # 12701633

The City of Santa Monica Department of Transportation (SMDOT) is soliciting bids for turnkey maintenance, inspection, and repair services for three hydraulic elevators, including two passenger elevators and one freight elevator, located at 1620 6th Street. The scope of work requires monthly systematic examination, lubrication, and repair of components such as traction machines, hydraulic pump units, and controllers, in compliance with California Administrative Code Title 8, Section 3000(h). The contractor must provide a maintenance supervisor, maintain a local warehouse of OEM replacement parts, and ensure a one-hour emergency response time during normal business hours. Deliverables include monthly testing of emergency recall and override operations, with results recorded on check-off sheets and maintained in on-site logs. Bids must be submitted electronically via the OpenGov portal by November 9, 2026. Qualified bidders must possess a valid C-11 California contractor's license and provide a current DIR registration. The contract award is based on a best-value determination rather than the lowest price, with evaluation criteria weighted across experience and technical competence (25%), ability to meet work plans and timelines (25%), cost (20%), stability and references (10%), value add (10%), and quality control (10%). The City reserves the option to extend the agreement for four additional one-year renewal periods. Required documentation for submission includes a Levine Act Disclosure, experience statement, and non-collusion declaration. Depending on the award amount, successful bidders may be required to provide a payment bond for contracts exceeding $25,000, an Oaks Initiative Disclosure for annual awards over $25,000, and a Living Wage Certification for contracts exceeding $54,200. Additionally, the contractor must maintain comprehensive insurance naming the City of Santa Monica as an additional insured and comply with Title II of the Americans with Disabilities Act.

D600 DEPT OF TRANSPORTATION - SaMoDOT

POSTED

DEADLINE

CNG Fueling Station Maintenance and Repair Services

Solicitation # 2026-RFP-0441

The County of Sacramento is soliciting proposals under solicitation 2026-RFP-0441 to establish a contract for Compressed Natural Gas (CNG) fueling station preventative maintenance and repair services. The contract covers two facilities: one for the Fleet Services Division and one for the Department of Airports located at 6730 Aviation Drive. The selected contractor must provide certified CNG technicians to perform twice-monthly preventative maintenance on slow fill and fast fill dispensing systems, as well as major services at 4,000 and 8,000 hour benchmarks. Service requirements include 24/7 availability, with on-site response times of 48 hours for standard service calls and 24 hours for emergency calls. All work must adhere to manufacturer specifications and Cal/OSHA safety standards, including the provision of GHS Safety Data Sheets. The contract is designed for an initial one-year term, with the County reserving the right to extend for up to four additional one-year terms upon mutual agreement. Award selection is based on a points-based scoring method considering factors other than price alone, with a two-percent price preference available for State Certified Micro-Business enterprises. Proposers must provide a Public Works and Prevailing Wage Contractor Registration number and certify compliance with employment and wage reporting requirements. Proposals must be submitted electronically by October 30, 2026. Payment will be processed via the ePayables card program or hardcopy checks following the inspection and acceptance of services.

DGS: CAPSD - Procurement

POSTED

DEADLINE

Vehicle Repair - Unit 2610 - Fleet

Solicitation # 321

Jefferson Parish Government is soliciting bids for the repair of a 2014 John Deere Tractor for its Department of Fleet Management. The scope of work includes diagnosing why the equipment fails to restart after running, replacing a non-operational fuel filter system, and draining, flushing, and refilling the fuel tank to remove debris contamination. The contractor is responsible for providing all necessary labor, materials, equipment, and transportation. The equipment is currently located at Sunshine Equipment in Covington, Louisiana. The contract will be awarded to the lowest responsive and responsible bidder. A critical requirement for the award is strict adherence to insurance standards per Jefferson Parish Resolution No. 136353 or No. 141125. Specifically, the contractor must maintain Garage Keeper’s Insurance of 500,000 dollars per occurrence, along with Commercial General Liability, Business Automobile Liability, and Worker’s Compensation coverage. The apparent low bidder must provide final insurance certificates within ten calendar days of the bid opening or face rejection. All costs, including incidentals, must be included in the total proposed bid amount.

Jefferson Parish Government

POSTED

DEADLINE

ELEVATOR & ESCALATOR MAINTENANCE, INSPECTIONS, AND TESTING

Solicitation # BPM059230

The Maryland Transit Administration is soliciting bids for a firm fixed price contract to provide comprehensive maintenance, inspection, and testing for elevators, escalators, and wheelchair lifts primarily located in Baltimore City. The scope of work includes full maintenance and repairs to ensure equipment operates at original contract speeds and remains in safe, first-class condition. Key deliverables include a minimum of four on-site team hours per escalator monthly for preventative maintenance, semi-annual and annual deep cleaning of units, and strict adherence to ASME A17.1 and A17.2 safety codes. The contract features a five-year base period with no options and requires the contractor to provide certified mechanics, maintain emergency service capabilities, and adhere to Maryland Living Wage requirements. Award will be made by lot to the responsible bidder offering the most favorable price. The solicitation establishes a 17 percent Minority Business Enterprise (MBE) participation goal and a 1 percent Veteran-Owned Small Business Enterprise (VSBE) goal. Required submissions include a Project Execution Plan, performance bonds, and various certifications regarding conflict of interest and non-disclosure. Invoicing is handled via email to the Contract Monitor and Accounts Payable, with a specific allowance of 600,000 dollars provided for parts, materials, and sub-work. All work must comply with federal, state, and local laws, including ADA requirements for intercom systems and strict regulations regarding the handling and disposal of PCBs.

Maryland Transit Administration

POSTED

DEADLINE

IFB 26C091005 - Hangar Door Hydraulic System Upgrade Services - CHP Academy Special Weapons and Tactics (SWAT)

Solicitation # 26C091005

The Department of the California Highway Patrol (CHP) is soliciting bids for Invitation for Bids (IFB) 26C091005 to perform a complete hydraulic system upgrade for two hangar doors at the CHP Academy SWAT facility in West Sacramento, California. The scope of work requires the contractor to provide all labor, materials, and equipment, including the installation of hydraulic power units, heavy-duty cylinders, rebuild kits, high-pressure hoses, and climate-appropriate fluid. The anticipated period of performance is from January 1, 2027, to June 30, 2027. A mandatory site walk-through was scheduled for November 9, 2026, and the final response deadline is November 23, 2026. The contract will be awarded to the lowest responsive and responsible bidder. A critical requirement is a minimum of 5% Disabled Veteran Business Enterprise (DVBE) participation, though incentives are available for higher participation levels. Bidders must comply with California prevailing wage laws, the Americans with Disabilities Act, and various safety and building codes. Depending on the final contract value, performance and payment bonds may be required for amounts exceeding 10,000 and 25,000 dollars, respectively. Submission requires a physical bid package containing specific certifications, including the Bidder Declaration, Non-Collusion Affidavit, and California Civil Rights Certification.

Department of the California Highway Patrol

POSTED

DEADLINE

Commercial Dishwashing & Steam Equipment ServicesThis subcontract opportunity with the Georgia Institute of Technology involves providing specialized repair and preventative maintenance for commercial dishwashers and steam-based equipment within dining facility projects. The scope of work includes critical technical tasks such as descaling boilers, repairing pumps, cleaning spray arms, and replacing steam valves to ensure all systems remain fully operational. Qualified candidates must hold a valid plumbing or mechanical license to perform these services. Interested parties should note that the response deadline is November 13, 2026, and the project falls under NAICS code 811310.

Georgia Institute of Technology

POSTED

DEADLINE

Commercial Hot-Side Equipment Repair & MaintenanceThis subcontract for Commercial Hot-Side Equipment Repair and Maintenance involves providing repair and preventative maintenance services for commercial cooking and heating equipment at Georgia Institute of Technology dining facilities. The scope of work includes burner cleaning, pilot light repair, calibration of ovens and broilers, and the replacement of heating elements. The primary objective is to ensure all cooking equipment is safe and operational, with the delivery of completed preventative maintenance checklists. Qualified contractors must hold a mechanical license or a gas fitter certification to perform these services. The solicitation was posted on October 28, 2026, with a response deadline of November 13, 2026. This opportunity falls under NAICS code 811310 and is intended for those working as subcontractors for prime contractors on these specific institutional projects.

Georgia Institute of Technology

POSTED

DEADLINE

Kitchen Equipment Repair & PM Services for GT Dining

Solicitation # PE-50300-RFQ-2027-000000353

The Georgia Institute of Technology is soliciting proposals under solicitation number PE-50300-RFQ-2027-000000353 for kitchen equipment repair and preventative maintenance services. The scope of work involves providing these essential maintenance and repair services for the Georgia Tech campus located in Atlanta, Georgia. This solicitation was posted on October 28, 2026, and requires responses to be submitted by November 13, 2026, at 5:00 PM UTC. Interested parties should coordinate with the primary point of contact, Anaya Carter-Merritt, and submit their proposals through the designated agency portal.

Georgia Institute of Technology

POSTED

DEADLINE

271982 - Generator Monitoring - Houston Co Health Dept

Solicitation # SRC0000037434

Solicitation SRC0000037434 is a sole source procurement for generator monitoring services for the Houston County Health Department in Alabama. The contract is managed by the State of Alabama and is subject to a maximum total cost of 25,000 dollars. The agreement allows for annual renewals by both parties for a total duration of up to five years from the effective date. The contract is governed by the Standard Terms and Conditions for Quick Quotes, incorporating the Department of Finance Administrative Code and designating Montgomery, Alabama, as the sole venue for litigation and dispute resolution. Key requirements for the supplier include registration with the Alabama Secretary of State for foreign entities, enrollment in the E-Verify program, and certification of compliance with Alabama state and local tax laws. The State of Alabama maintains the right to inspect all products before acceptance, and payment is processed via electronic methods such as P-cards or EFT. Suppliers must submit all responses electronically through the Alabama Buys portal.

POSTED

DEADLINE

IFB #26028 - 295.00 - Elevator Maintenance on the Governor Mario M Cuomo Bridge for NY Division

Solicitation # 49244

The New York State Thruway Authority is soliciting bids for the maintenance, inspection, repair, and testing of eight Fraco SEL-1000B Industrial Lifts for Personnel and Loads. These lifts are located within the New York Division at the Governor Mario M. Cuomo Bridge in Tarrytown, New York. The scope of work includes performing required service on a monthly, quarterly, and yearly basis to ensure operational safety and compliance. This solicitation, identified as IFB 26028, falls under NAICS code 811310 for commercial and industrial machinery and equipment repair and maintenance. Interested contracting firms must submit their responses by the deadline of November 30, 2026. The procurement is being managed by the New York State Thruway Authority Procurement Services.

New York State Thruway Authority - Procurement Services

POSTED

about 19 hours ago

DEADLINE

in about 1 month

AI Contract Overview

The contract mandates comprehensive full-spectrum maintenance for 78-foot patrol boats, encompassing routine servicing, corrective repairs, and detailed system troubleshooting to ensure operational readiness. All work must strictly adhere to original equipment manufacturer specifications and U.S. Navy standards, requiring certified procedures and qualified personnel to maintain compliance across all technical and safety requirements. The performance location is in Silverdale, Washington, with the work supporting naval operations through consistent, high-quality vessel upkeep. This subcontract is issued under NAICS code 811310 and is managed by the Strategic Weapons Facility Pacific under the Department of Defense. The solicitation was posted on July 22, 2026, with proposals due by August 8, 2026. While no set-aside classification is specified, the contract requires responders to demonstrate capability in delivering maritime maintenance services that meet rigorous military standards, with all activities centered on sustaining the functionality and safety of the patrol boat fleet.

General Info

Maintain 78-foot patrol boats in Silverdale to Navy standards with certified procedures and qualified personnel.

Agency

Department Of Defense → Strategic Weapons Facility Pac Financial

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

Place of Performance

Silverdale, WA, 98315, USA

Set-Aside

NONE

Documents

This scope was carved out of N64710-26-0001.

The full solicitation package (11 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

U.S. NAVY 78-FOOT PATROL BOAT ORGANIZATIONAL MAINTENANCE

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedJul 22

subcontract

Response DeadlineAug 8

Deadline has passed

Submission Closed

08/08/2026, 12:00:00 AM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → Strategic Weapons Facility Pac Financial

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Strategic Weapons Facility Pac Financial

Office AddressN/A

ContactsNo contact information available

Full Description

Full-spectrum maintenance of 78-foot patrol boats including routine servicing, corrective repairs, system troubleshooting, and compliance with OEM and U.S. Navy standards.