Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Government Contract opportunity from Department Of Defense was posted on September 8, 2005. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

W--Award Notice of Washers/Dryers Rental Services. Point of Contact: Joyce Amador, Contract Specialist, Phone [phone hidden], Fax [phone hidden] Email [email hidden]. Directorate of Contracting, Monterey, California:

Awarded
W9124J-05-T-0084Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 532210
New
Federal
Langley AFB Washer/Dryer Lease and Maintenance
Solicitation # FA480027Q0004
Solicitation FA480027Q0004 is a total small business set-aside, specifically for women-owned small businesses, to provide the rental, installation, and maintenance of new commercial-grade washers and dryers at Langley AFB, Virginia. The contractor is responsible for providing all labor, supervision, tools, and transportation to supply standard, stackable, and industrial units. Key technical requirements include coinless, large-capacity machines with specific voltage needs, such as 120V for washers and 220V for dryers. The scope of work includes a transition period where equipment must be fully operational within the first ten days of the contract, followed by mandatory quarterly preventative maintenance and as-needed repairs. Maintenance is subject to strict response timelines, including a 12-hour acknowledgment, 24-hour on-site inspection, 72-hour repair ceiling, and a five-calendar-day replacement turnaround. The contract is structured as a firm-fixed-price agreement consisting of a base period from December 4, 2026, to December 3, 2027, with multiple option years extending through December 2031. Award decisions will be based on the most advantageous offer, weighing price, technical capability, and past performance with equal importance. Proposals must be submitted via the PIEE Solicitation module in three distinct volumes: technical, price, and past performance. Administrative requirements include electronic invoicing through the Wide Area WorkFlow system and the submission of a written Quality Control Plan within ten working days of the award. Personnel must obtain necessary base access and identification, and the contractor must comply with various DFARS and FAR clauses regarding cybersecurity and reporting.
FA4800 633 Cons Pkp

POSTED

about 14 hours ago

DEADLINE

in 4 days
NAICS: 532210
Federal
Washer/Dryer Lease and Maintenance, Naval Submarine Base (NSB), Kings Bay, GA
Solicitation # N6883627Q0007
Solicitation N6883627Q0007 is a combined synopsis and request for quote for the lease and maintenance of commercial washers and stacked dryers at Naval Submarine Base Kings Bay, Georgia. This small business set-aside contract is managed by Navsup Flc Jacksonville Erp and is awarded on a firm fixed price basis. The contractor is required to provide Energy Star rated, non-coin operated commercial laundry units that are no older than four years, including all necessary installation, connection hoses, and ongoing maintenance and repair services. All equipment must be installed according to National Electric and Mechanical Codes and local, state, and federal regulations. The contract includes a base period from December 15, 2026, to December 14, 2027, with multiple one-year option periods. Award will be based on the Lowest Price Technically Acceptable (LPTA) method, evaluating technical capability for acceptability and price for reasonableness and completeness. Quoters must submit their proposals in three PDF volumes covering price, technical capability, and contractor responsibility. Key administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for invoicing and adherence to a Quality Assurance Surveillance Plan administered by the Contracting Officer Representative. Quotes are due by 3:00 PM Eastern Time on November 6, 2026.
Navsup Flc Jacksonville Erp

POSTED

14 days ago

DEADLINE

in 8 days

General Info

Contract Value

$143,065

NAICS

532210 - Consumer Electronics and Appliances Rental

Place of Performance

TX

Set-Aside

NONE

Award Issued Date

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

4 updates
PhaseAwarded
Posted

Combined Synopsis

Notice updated

The notice title changed. The notice description changed.

Notice updated

The notice description changed.

Notice updated

Response deadline changed from Jul 7, 2005 to Jul 20, 2005. The notice title changed. The notice description changed.

Notice updated

Response deadline changed from Jul 20, 2005 to Aug 3, 2005. The notice title changed. The notice description changed.

Awarded

Contract was awarded

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W6QM Micc-Fdo Ft Sam Houston
ContactsNo contacts available
OfficeFORT SAM HOUSTON, TX, 78234-1361, USA
Office AddressFORT SAM HOUSTON, TX, 78234-1361, USA
ContactsNo contact information available

Full Description

Show more
SCHEDULE B Item Description Quantity U/I U/P Total 0001 Base Year: Washer rental including installation, maintenance and removal. Period of performance 01 October 2005  30 September 2006. 308 EA $________ $__________ 0002 Gas dryer rental, including installation, maintenance, and removal. 207 EA $________ $__________ 0003 Electric dryer rental, including installation, maintenance and removal. 100 EA $________ $__________ 0004 Clean vent systems to include flex exhaust hoses, main air ducts, exhaust fans, roof vents, ceiling vents, wall vents and grills. 12 Monthly $________ $__________ 0005 Contractor Manpower Reporting The contractor shall report ALL contractor manpower (including subcontractor manpower) required for performance of this contract. The contractor shall completely fill in all the information in the format using the following web address: https:\contractorm anpower.army.pentagon.mil. in accordance para 4.6 in the PWS 1 Unit $________ $__________ Estimated Quantity 0006 IncreaseWashers, IAW para 2.3 in the PWS (Due to possible increase in student personnel) 100 EA $_______ $__________ 0007 Increase Gas Dryers, IAW para 2.3 in the PWS (Due to possible increase in student personnel) 60 EA $_______ $__________ 0008 Increase Electric Dryers, IAW para 2.3 in the PWS (Due to possible increase in student personnel) 30 EA $_______ $__________ SCHEDULE B Item Description Quantity U/I U/P Total 1001 Option 1: Washer rental including installation, maintenance and removal. Performance Period 01 October 2006  30 September 2007. 308 EA $________ $__________ 1002 Gas dryer rental, including installation, maintenance, and removal. 207 EA $________ $__________ 1003 Electric dryer rental, including installation, maintenance and removal. 100 EA $________ $__________ 1004 Clean vent systems to include flex exhaust hoses, main air ducts, exhaust fans, roof vents, ceiling vents, wall vents and grills. 12 Monthly $________ $__________ 1005 Contractor Manpower Reporting The contractor shall report ALL contractor manpower (including subcontractor manpower) required for performance of this contract. The contractor shall completely fill in all the information in the format using the following web address: https:\contractorm anpower.army.pentagon.mil. in accordance para 4.6 in the PWS 1 Unit $________ $__________ Estimated Quantity 1006 IncreaseWashers, IAW para 2.3 in the PWS (Due to possible increase in student personnel) 100 EA $_______ $__________ 1007 Increase Gas Dryers, IAW para 2.3 in the PWS (Due to possible increase in student personnel) 60 EA $_______ $__________ 1008 Increase Electric Dryers, IAW para 2.3 in the PWS (Due to possible increase in student personnel) 30 EA $_______ $__________ SCHEDULE B Item Description Quantity U/I U/P Total 2001 Option 2: Washer rental including installation, maintenance and removal. Performance Period: 01 October 2007  30 September 2008. 308 EA $________ $__________ 2002 Gas dryer rental, including installation, maintenance, and removal. 207 EA $________ $__________ 2003 Electric dryer rental, including installation, maintenance and removal. 100 EA $________ $__________ 2004 Clean vent systems to include flex exhaust hoses, main air ducts, exhaust fans, roof vents, ceiling vents, wall vents and grills. 12 Monthly $________ $__________ 2005 Contractor Manpower Reporting FFP The contractor shall report ALL contractor manpower (including subcontractor manpower) required for performance of this contract. The contractor shall completely fill in all the information in the format using the following web address: https:\contractorm anpower.army.pentagon.mi l. in accordance para 4.6 in the PWS 1 Unit $________ $__________ Estimated Quantity 2006 IncreaseWashers, IAW para 2.3 in the PWS (Due to possible increase in student personnel) 100 EA $_______ $__________ 2007 Increase Gas Dryers, IAW para 2.3 in the PWS (Due to possible increase in student personnel) 60 EA $_______ $__________ 2008 Increase Electric Dryers, IAW para 2.3 in the PWS (Due to possible increase in student personnel) 30 EA $_______ $__________ SCHEDULE B Item Description Quantity U/I U/P Total 3001 Option 3: Washer rental including installation, maintenance and removal. Performance Period: 01 October 2008 30 September 2009. 308 EA $_________ $___________ 3002 Gas dryer rental, including installation, maintenance, and removal. 207 EA $_________ $___________ 3003 Electric dryer rental, including installation, maintenance and removal. 100 EA $_________ $___________ 3004 Clean vent systems to include flex exhaust hoses, main air ducts, exhaust fans, roof vents, ceiling vents, wall vents and grills. 12 Monthly $_________ $___________ 3005 Contractor Manpower Reporting FFP The contractor shall report ALL contractor manpower (including subcontractor manpower) required for performance of this contract. The contractor shall completely fill in all the information in the format using the following web address: https:\contractorm anpower.army.pentagon.mil. in accordance para 4.6 in the PWS 1 Unit $_________ $___________ Estimated Quantity 3006 IncreaseWashers , IAW para 2.3 in the PWS (Due to possible increase in student personnel) 100 EA $_______ $__________ 3007 Increase Gas Dryers, IAW para 2.3 in the PWS (Due to possible increase in student personnel) 60 EA $_______ $__________ 3008 Increase Electric Dryers, IAW para 2.3 in the PWS (Due to possible increase in student personnel) 30 EA $_______ $__________ SCHEDULE B Item Description Quantity U/I U/P Total 4001 Option 4: Washer rental including installation, maintenance and removal. Performance Period: 01 October 2009  30 September 2010. 308 EA $__________ $___________ 4002 Gas dryer rental, including installation, maintenance, and removal. 207 EA $__________ $____________ 4003 Electric dryer rental, including installation, maintenance and removal. 100 EA $__________ $____________ 4004 Clean vent systems to include flex exhaust hoses, main air ducts, exhaust fans, roof vents, ceiling vents, wall vents and grills. 12 Monthly $__________ $____________ 4005 Contractor Manpower Reporting FFP The contractor shall report ALL contractor manpower (including subcontractor manpower) required for performance of this contract. The contractor shall completely fill in all the information in the format using the following web address: https:\contractorm anpower.army.pentagon.mil. in accordance para 4.4 in the PWS 1 Unit $__________ $___________ Estimated Quantity 4006 IncreaseWashers, IAW para 2.3 in the PWS (Due to possible increase in student personnel) 100 EA $_______ $__________ 4007 Increase Gas Dryers, IAW para 2.3 in the PWS (Due to possible increase in student personnel) 60 EA $_______ $__________ 4008 Increase Electric Dryers , IAW para 2.3 in the PWS (Due to possible increase in student personnel) 30 EA $_______ $__________ PERFORMANCE WORK STATEMENT FOR WASHER/DRYER RENTAL SERVICES PERFORMANCE WORK STATEMENT FOR WASHERS AND DRYERS RENTAL SERVICES FOR PRESIDIO OF MONTEREY AND ORD MILITARY COMMUNITY 1. DESCRIPTION OF SERVICES. 1.1 Contractor shall furnish all non-coin operated, commercial washers and dryers on a rental basis necessary to perform all work requirements in accordance with the terms and conditions of this contract. Contractor s hall furnish all plant, labor, material, transportation, and equipment necessary to install, maintain, repair, and relocate contractor-owned washers and dryers. Contractor shall clean vent ducts and exhaust fans for all laundry rooms, replace gas supply l ines, and hot and cold washer hoses. 1.2. The Contractor shall furnish and maintain sufficient, general service-type equipment and tools, and all parts necessary to support such equipment and tools during the term of the contract. Such equipment and parts shall be subject to inspection and a pproval of the Contracting Officer or his authorized representative (COR). 1.2. MAINTAIN WASHERS. 1.2.1. Contractor shall inspect, clean, repair, or replace water hoses and strainers. Washing machines shall have not less than an eighteen (18) pound dry weight drum capacity with three cycle (heavy, regular, and delicate) washing capabilities. Washers shall be equipped with a lint-filter or automatic lint flush system and will automatically shut off when the lid is opened or by manual shut down features. Each washer shall be able to operate on a 3-phase, 110 volt, 60-cycle, 20-Amp electrical circuit wi thout overloading under normal operating conditions. Each machine shall have hot, warm, and cold water temperature selectors with fabric softener and bleach dispensers. Machines with coin slots must be fixed to allow free-operation of machine. Washers s hall be stabilized and leveled in such a manner as to prevent noise and vibration. Washer machines shall not be grounded to water supply lines or drain line pipes but properly grounded to prevent electrical shock. 1.2.2. Contractor shall ensure that inoperable machines are repaired, replaced or changed out within forty-eight (48) hours after notification of the deficiency. Contractor shall notify the building manager and the COR when repairs will be accomplished. 1.2.3. Contractor shall place an OUT OF ORDER sign on broken machines with an expected date of repair for unserviceable equipment. 1.2.4. Contractor shall provide to the Contracting Officer and the COR a list of buildings where washers will be installed, the number installed, and a numeric accountability of each appliance with model and serial numbers in each location. 1.2.5. Contractor shall be given a thirty calendar-day phase-in period to install, connect and make fully operational all machines listed in TE  3. The contractor will submit a time line written schedule to the COR what days the appliances will be inst alled in each facility. When machines are added, removed, or relocated, the model, serial, and machine numbers of each machine will be furnished to the Contracting Officer and COR for updating existing washer and dryer list. 1.2.6. Upon request from the Contracting Officer or COR, the contractor shall remove washers within the same building, from one building to another, or from any areas where contract-furnished appliances are located for the convenience of the government an d shall replace such appliances when instructed to do so by the Contracting Officeror contracting office representative. 1.2.7. Utilities such as electricity, hot and cold water supply, and shut off valves for each appliance will be provided and maintained by the Government. Utility outlets such as hose bib connections and electrical receptacles are accessible by installi ng ample length hoses water supply attached to each machine. Contractor shall not be permitted to modify existing utility services. Contractor shall furnish electrical connections from appliances to electrical outlets, water hoses to hose bib connections, adapters, fittings, and other accessories necessary to connect machines to existing utilities. 1.2.8. Contractor shall provide names, phone numbers and or pager numbers of each contact person responsible for servicing machines. Repairs on machines during normal working hours will be accomplished between 0745 to 1645 hou rs Monday through Friday. Trouble calls received after normal working hours will be repaired the next workday. Trouble calls received on weekends and holidays shall be repaired by the next immediate workday. Contractor shall notify the building manager on status prior to departing. 1.3. MAINTAIN DRYERS AND VENT SYSTEMS. 1.3.1. Contractor shall inspect, clean, repair, or replace lint screens, gas supply lines, and compression fitting. Contractor shall provide clothes dyers with not less than an eighteen (18 cubic foot capacity) pound dry weight drum capacity. Dryers sha ll be equipped with a lint-filter and shall be inspected to ensure continuous operation. Flexible gas supply lines, adapters, connectors, couplings, and fittings shall be furnished and replaced by contractor as necessary. 1.3.1.1. Each dryer shall operate on a 3-phase, 110 volt AC, 60 HZ, 20 Amp circuit. Gas and electric dryers shall have not less than a 5.5 cubic feet capacity. Dryers shall be equipped with temperature settings for fabrics such as permanent press, norma l, delicate, and air only. Machines shall have timer capabilities for the desired fabric. Contractor shall ensure lint screens are installed in each dryer. Dryers shall be stabilized and leveled to prevent noise and vibration and be properly grounded to prevent electrical shock. 1.3.1.2. Contractor shall ensure that inoperable machines are repaired, replaced or changed out within forty-eight (48) hours after notification of the deficiency. Contractor shall notify the building manager and the COR when repairs will be accomplished . 1.3.1.3. Contractor shall place an OUT OF ORDER sign on inoperable machines with an expected date of repair for unserviceable equipment. 1.3.1.4. Contractor shall provide to the Contracting Officer and the COR a list of buildings where dryers will be installed, the number installed, and a numeric accountability of each appliance with model and serial numbers in each location. 1.3.1.5. Contractor shall be given a thirty calendar-day phase-in period to install, connect and make fully operational all machines listed in TE-3. The contractor will submit a written time line schedule to the COR what days appliance will be installed in each facility. When machines are added, removed, or relocated, the model, serial, and machine numbers of each machine will be furnished to the Contracting Officer and COR for updating existing washer and dryer list. 1.3.1.6. Upon request from the Contracting Officer or COR, the contractor shall remove dryers within the same building, from one building to another, or from an areas where contract-furnished appliances are located for the convenience of the government an d shall replace such appliances when instructed to do so by the Contracting Officer or contracting office representative at no additional cost to the government. 1.3.1.7. Utilities such as electricity, gas supply, and shut off valves for each appliance will be provided and maintained by the Government. Utility outlets such as electrical receptacles and gas supply service shall be accessible by installing ample l ength flex gas supply lines attached to each machine. Contractor shall not be permitted to modify existing utility services. Contractor shall furnish connections from appliances to gas services and electrical outlets. Adapters, fittings, and other access ories necessary to connect machines to existing utilities shall be provided by contractor. 1.3.1.8. Contractor shall provide names, phone numbers and or pager numbers of each contact person responsible for services machines. Repairs on machines during normal working hours will be accomplished between 0745 to 1645 hours Monday through Friday. Trouble calls received after normal working hours will be responded to the next workday. Trouble calls received on weekends and holidays shall be responded to the next immediate workday. Contractor shall noti fy the building manager on status prior to departing. Contractor shall provide to the Contracting Officer or COR a name and phone number of a contract person who can be notified after normal duty hours in the event machines breakdown occurs. 1.3.1.9. Contractor shall clean dust and lint accumulation from dryer vent ducts, hose connections, exhaust fans, wall vent ducts, main vent ducts, and flexible vent duct hoses quarterly. Contractor shall provide an annual schedule of duct cleaning to th e COR and Contracting Officer. Loose debris and trash behind dryers shall be cleaned up and removed. 2. PERFORMANCE REQUIREMENT SUMMARY. The contractor service requirements are summarized into performance objectives that relate directly to mission essential items. The performance threshold briefly describes the minimum acceptable levels of service requ ired for each requirement. These thresholds are critical to mission success as specified in Attachment: 2 Performance Requirement Summary. 2.1 ADDITIONS, DELETIONS, SUSPENSIONS, AND REDUCTIONS OF SERVICES. 2.2. The Government reserves the right to add or delete buildings in whole or in part for the services and reserves the right to increase or decrease washers and dryers in whole or in part for the services to be provided under this contract. Request to i ncrease/decreaseappliances shall be adjusted through contract modifications. Removal or relocation of washers and dryers shall be performed at no additional cost to the government. 2.3. The Government may increase the quantities indicated in section C.1.2.8 by an estimated thirty-three (33) percent due to a possible increase in the student population. 3. GENERAL. 3.1. CONTRACTOR QUALITY CONTROL (CQP) PROGRAM: 3.1.1. Contractor shall establish and maintain an effective quality control plan to ensure the requirements of this contract are provided as specified. 31.2. Contractor shall establish a quality control plan to enable the Contractor to perform sufficient inspection of all items of work, including that of subcontractors, to ensure conformance to applicable specifications with respect to the materials, wor kmanship, functional performance, and identification of all deficiencies. 3.1.3. Contractor has full responsibility for compliance with all provisions of the contract. The Government will inspect for compliance with all contract requirements in accordance with the Inspection/Acceptance, FAR 52.212-4(a). 3.1.4. Ten day after contract award and prior to performance of work, the contractor shall meet with both the Contracting Officer and other authorized Government Representatives if necessary to discuss quality control requirements. The meeting shall deve lop mutual understanding relative to details of the plan quality control operations, inspections, and the interrelationship of Contractor and Government Inspectors. 3.1.5. Contractor shall furnish the Contracting Officer, within ten (10) calendar days after receipt of notification of contract award, a quality control plan that includes procedures, and instructions. 3.1.6. Contractor shall periodically review the quality control plan to ensure the plan minimizes appliance failures. 3.1.7. Contractor shall notify the Contracting Officer, in writing, of any proposed change to the Contractors Quality Control Plan. 4. SAFETY PROGRAM: 4.1. Contractor shall be responsible for instructing his employees in appropriate safety measures and shall not permit them to place machines, or any other equipment in traffic lanes or other locations in such a manner as to create safety hazards. Approp riate signs shall be provided and placed by the Contractor to mark areas, which are slippery or unsafe. 4.1.1. Contractor shall ensure safety requirements and procedures to include employees responsibility for overall accident prevention are administered and practiced by all employees. Personal Protective Equipment (PPE) shal l be provided and worn in the performance of work requirements to all employees at contractor expense. 4.1.2. Contractor shall be fully responsible and directly liable for incidental property damage, personal injuries and or death to personnel as a direct result of faulty installed equipment installed, replaced, repaired or removed by the contractor. Con tractor shall hold the government harmless from any or all claims arising from such cause. 4.1.3. Contractor shall establish, implement, and maintain a safety program for preventing accidents and preserving the life and health of the Contractors personnel involved in the performance of this contract. The Contractor shall submit two (2) copies of his proposed safety plan to the Contracting Officer within ten (10) calendar days after receipt of notification of contract award. The Contractors safety plan shall include provisions for: a. Reporting accidents and injuries to the Contracting Officer in accordance with (IAW) AR 385-40. b. OSHA Compliance. c. Inspection of Contractors work areas for potential safety hazards. d. Furnishing Contractor personnel protective equipment and safety devices. e. Providing safety training to Contractor personnel. f. Providing first aid to Contractor personnel. 4.2. OCCUPATIONAL SAFETY AND HEALTH ACT (OSHA) REQUIREMENTS: 4.2.1. Contractor shall inform the Contracting Officer, in writing, of any OSHA violations as they are identified. Compliance with OSHA shall be the responsibility of the Contractor. The Contractor shall coordinate with the Contracting Officer to resolv e OSHA violations caused by defects in facilities. 4.2.2. Non-conforming Government facilities shall not excuse the Contractor from non-performance of services. Contractor shall make every effort to employ abatement measures or other work-around to guarantee continued contract performance. The Contractor shall coordinate with the Government when requesting variances or other exceptions from OSHA agencies. 4.3. QUALITY ASSURANCE INSPECTIONS: 4.3.1. The Government will inspect for compliance of the terms and conditions of contract requirements in accordance with the Inspection/Acceptance, FAR52.212-4(a) of Services clause, FAR 52.246-4. Inspection shall include but not limited to unscheduled, random, periodic, customer complaints, and 100% inspections. Government personnel conducting inspections shall include but not limited to the Contracting Officer and appointed by Letter of Designation an authorized Government Representative. Inspection s performed by the Contracting Officer shall take precedence over any and all inspections performed by other authorized Government Representative. 4.4. DAMAGES, EQUIPMENT, AND RESPONSIBILITY FOR WORK: 4.4.1. All tasks accomplished by washer and dryer rental personnel shall be done to preclude damage or disfigurement of furniture, building structures, and grounds. The Contractor shall be responsible for all damages to persons or property that occurs as a result of his fault or negligence in connection with the performance of his work. Surfaces, fixtures, or any other furnishings damaged by the Contractors personnel shall be repaired or replaced by the Contractor to the satisfaction of the Contracting Officer at no cost to the Government. 4.4.2. The Government will not be held responsible for any item of Contractors equipment, which may be lost, damaged, or stolen.

More opportunities from Department Of Defense → W6QM Micc-Fdo Ft Sam Houston

Same awarding agency

NAICS: 561210
New
Federal
Fort Leonard Wood BASOPS Solicitation
Solicitation # W5168W26RA011
Solicitation W5168W26RA011 is a Firm Fixed Price, non-personal services contract set aside for 8(a) small businesses to provide Base Operations Maintenance and Support Services (BASOPS) for Fort Leonard Wood and the Lake of the Ozarks Army Recreation Area. The scope of work covers six primary functional areas: Grounds Maintenance, Pavement Clearance (snow, ice, and sand removal), Facility Maintenance (both vertical and horizontal), Heating and Cooling Services, and Army Cemetery operations. The contractor is responsible for providing all necessary personnel, equipment, supplies, and supervision, including all parts required for Preventive Maintenance Orders and Demand Maintenance Orders. The contract utilizes a Lowest Price Technically Acceptable (LPTA) source selection process, evaluating proposals based on technical capability, past performance, and price. Key requirements include a Project Manager with a management degree and five years of relevant experience who must be on-site during standard business hours. Performance is managed through the GFEBS/ArMA systems and is subject to the Quality Assurance Surveillance Plan. The period of performance begins March 1, 2027, and extends through December 30, 2031, across a base year and four option years. Invoicing is processed electronically via the Wide Area WorkFlow system.
Facilities Support Services

POSTED

about 14 hours ago

DEADLINE

in 3 months
View Details
NAICS: 722310
New
Federal
REQUEST FOR INFORMATION (RFI): FORT BRAGG, NC (FBNC) FOOD SERVICES SUPPORT
Solicitation # W5168W27RA021
The Department of Defense, through the Mission and Installation Contracting Command on behalf of the Army Sustainment Command, has issued a sources sought notice under solicitation number W5168W27RA021. This request for information is intended for market research and planning purposes to evaluate a potential requirement for high-volume installation food services and specialized cook support at Fort Bragg, North Carolina. The government is seeking technical and operational feedback regarding vendor capabilities, transition lead times, and the availability of qualified small businesses, including 8(a), SDVOSB, WOSB, and HUBZone firms, under NAICS code 722310. A critical component of this requirement is security compliance. The government is evaluating industry capacity to meet stringent physical access controls, including HSPD-12 Tier 1 background checks and Common Access Card issuance. Furthermore, personnel assigned to specific buildings must hold active SECRET security clearances prior to starting work, and the government is inquiring about firms possessing a Secret Facility Clearance sponsored by the DCSA. The scope also includes the deployment of qualified cook support for government-led tactical or remote site feeding operations on TDY assignments. This notice is not a formal solicitation, and the government is not currently accepting quotes or proposals.
Food Service Contractors

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 561621
New
Federal
G2 Security
Solicitation # W9124J27RMCG2
The United States Army Medical Command (MEDCOM) is seeking a contractor to provide maintenance, repair, and programming support for its Electronic Security System (ESS) infrastructure at Joint Base San Antonio (JBSA) Fort Sam Houston, Texas. The scope of work includes the upkeep of closed-circuit television (CCTV), access control systems, and intrusion alarms to ensure maximum operational functionality and minimum downtime. Key responsibilities involve maintaining the interface between Open Options DNA Fusion and CCTV equipment, supporting Uninterrupted Power Supplies (UPS), and providing 24/7 telephone consultation with a two-hour onsite response time for emergency requests. The contract is intended to be a single firm fixed price commercial service contract consisting of a base year and four option years, to be awarded during FY 27. This requirement is designated as an 8(a) Small Business Set-Aside under NAICS code 561621. To qualify, contractors must have been certified dealers of both the Open Options Access Control System and Avigilon Surveillance Systems and Software for at least five years prior to the award. Additionally, the contractor must provide a letter of good standing from the manufacturer and three references for similar installations completed within the last three years. The selected provider will be required to implement a Quality Control Program (QCP) within 30 days of award and ensure all services comply with manufacturer specifications and Fort Sam Houston Fire and Safety standards.
Security Systems Services (except Locksmiths)

POSTED

3 days ago

DEADLINE

in 15 days
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS