Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Warehouse Support Services at the Frank Hagel Fede

Active

28321326Q00000091Federal

Response Deadline07/20/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract seeks to provide warehouse support services at the Frank Hagel Federal Building in Richmond, CA, involving the staffing of two forklift operator/warehouse personnel and one administrative assistant. The requirement is managed by the Social Security Administration’s Office of Acquisition and Grants under solicitation number 28321326Q00000091, which was posted on July 17, 2026, with responses due by July 20, 2026. This solicitation is designated under the SBA set-aside category, indicating preference for small business concerns. The NAICS code 541614 classifies the service as other scientific and technical consulting services, reflecting the specialized nature of the support required. All personnel must perform duties on-site at the designated federal building, and the contracting officer responsible for the solicitation is Mai Wellman, reachable via email at mai.wellman@ssa.gov. The contract opportunity is posted on FedConnect and open exclusively to eligible small businesses participating in the SBA program.

General Info

Warehouse support contract for small businesses in Richmond, CA, requiring two forklift operators and one admin assistant.

Agency

Social Security Administration → Office of Acquisition and GrantsView Agency

NAICS

541614 - Process, Physical Distribution, and Logistics Consulting ServicesView NAICS

Place of Performance

Not specified

Set-Aside

SBA

Documents

(5)

Wage Determination 2015-5623.pdf

PDF

Sol_28321326Q00000091.pdf

PDF

H2315T23- Past Performance Questionnaire.doc

DOC

H2315T22- Past Performance Questionnaire Instructions.docx

DOCX

SOW for FHFB Warehouse Services.docx

DOCX

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation

PostedJul 17

Solicitation

Response DeadlineJul 20

Submission deadline

Response Deadline

07/20/2026, 05:00:00 PM UTCin 2 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencySocial Security Administration → Office of Acquisition and Grants

Contacts1 person available

OfficeUS

Organization / Agency

Social Security Administration → Office of Acquisition and Grants

View Agency Profile

Office AddressUS

Contacts

Mai WellmanContracting Officer

contact@example.gov

Full Description

Show more

Warehouse Support Services of two forklift operator/warehouse personnel and one administrative assistant at the Frank Hagel Federal Building in Richmond, CA.

Similar Contracts

Same NAICS industry code

Small Business Mentorship or Teaming OpportunityA prime contractor that is a Small Disadvantaged Women-Owned Business is seeking teaming or supply chain partnerships to support fulfillment of a Defense Logistics Agency contract, with a focus on advancing small business utilization objectives. The opportunity is structured as a subcontracting arrangement aimed at leveraging the capabilities of qualified partners to meet program requirements while aligning with federal goals for diverse small business participation. The partnership is intended to strengthen the prime’s ability to execute contract obligations efficiently and effectively under the Department of Defense’s broader mission support framework. The solicitation is active as of July 17, 2026, through the DIBBS platform and is tied to contract SPE7L526P1765, with performance expected to support DLA’s logistics and supply chain operations across unspecified geographic locations. There is no specified set-aside classification or NAICS code at this time, indicating flexibility in the types of capabilities and services sought from potential teaming partners.

Defense Logistics Agency

POSTED

about 16 hours ago

DEADLINE

Q702--San Diego Research and Development Facility Initial Outfitting, Transition, and Activation ServicesThe Department of Veterans Affairs Veterans Health Administration plans to issue a firm-fixed-price contract for Initial Outfitting Transition and Activation (IOTA) Services to support the activation of the new San Diego Research & Development Facility. This facility, spanning approximately 44,000 net usable square feet and including 100 parking spaces, represents a significant expansion to the VA San Diego Healthcare System’s capabilities for Veteran Healthcare Research & Development. The contract period is expected to last 35 months and aims to provide the necessary contractor services to help facilitate the launch and operational readiness of the new facility. This procurement is classified as a 100% Service-Disabled Veteran-Owned Small Business (SDVOSB) set-aside, consistent with the VA’s Veterans First Contracting Program, and will be conducted under FAR Parts 12 and 37. Eligible bidders must be verified by the VA as an SDVOSB and meet the applicable small business size standard for NAICS code 541614. The solicitation is anticipated to be posted around May 15, 2026, with a close date tentatively set for June 8, 2026, though these dates may change. Interested parties are encouraged to prepare for potentially truncated response times and are directed to submit any questions via email to the designated Contracting Officer, Kathleen Klotzbach.

POSTED

DEADLINE

in about 1 month

Implementation Planning & Remediation Support

POSTED

DEADLINE

in about 1 month

Small Business Subcontracting with Accelerated PaymentThis contract opportunity is designed exclusively for small businesses seeking to serve as subcontractors under a total small business set-aside, as defined by FAR 19.5, ensuring that only eligible small businesses can compete for award. The primary incentive is accelerated payment processing under FAR 52.232-40, which guarantees faster payment cycles for subcontractors once deliverables are accepted, improving cash flow and operational stability for small firms. The work is performance-based and centered at Tinker Air Force Base with a zip code of 73145-8000, indicating the geographic location where services or deliverables must be executed. The opportunity is posted under the Aviation Supply Chain within the Department of Defense, reflecting its strategic importance to defense logistics and aerospace supply chains. Although no solicitation number or NAICS code is provided, the response deadline is fixed for July 23, 2026, and interested small businesses must submit their proposals by that date to be considered. Participation requires alignment with SBA small business size standards and full compliance with federal subcontracting regulations.

AVIATION SUPPLY CHAIN

POSTED

DEADLINE

Notice of Intent to Award a Sole Source 8(a) to Flatwater Professional Services Company for the U.S. Army Corps of Engineer, Memphis District, Programs and Project Management Division Office Furniture RequirementThe U.S. Army Corps of Engineers, Memphis District, intends to award a sole source 8(a) commercial services contract to Flatwater Professional Services Company for the supply, delivery, and installation of office furniture for the Programs and Project Management Division. The work includes furnishing all materials, labor, equipment, and performing complete installation at the Odell Horton Federal Building in Memphis, Tennessee, with removal of all packaging and debris. The contract will be a commercial firm-fixed-price action under FAR Part 12, with delivery terms FOB destination. The North American Industry Classification System code is 541614, and the small business size standard is $20 million. This notice is posted for informational purposes only and does not constitute a solicitation for competitive bids. Interested parties must submit documentation demonstrating technical capability, past performance, and references by 10:00 a.m. Central Time on July 20, 2026, to the designated contract specialist. Submission of information is voluntary and without reimbursement; the government will not award a contract based on these submissions nor provide capability briefings. The decision to proceed as a sole source or open competition rests solely with the government, and the award may occur without further notice. All submitted data must be properly marked if proprietary, and the response deadline is strictly enforced.

W07V Endist Memphis

POSTED

DEADLINE

Small Business Subcontracting SupportSmall businesses are invited to engage in supply, compliance, or logistics functions under a subcontracting structure tied to a Department of Defense prime contract awarded to the DDSP NEW CUMBERLAND FACILITY. This opportunity is structured as a Total Small Business Set-Aside under SBA guidelines, ensuring that only qualified small businesses may respond, with the intent to promote small business participation in federal contracting. The solicitation is open for submissions beginning July 14, 2026, with a firm deadline of July 27, 2026, and the primary place of performance is located in New Cumberland, Pennsylvania, with ZIP code 17070-5002. Participation requires alignment with the prime contractor’s subcontracting obligations, likely involving the delivery of goods, adherence to regulatory standards, or support of supply chain logistics. Interested parties should access the full solicitation through the provided DIBBS link to understand specific requirements, evaluation criteria, and submission protocols.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

IBex Industry Capability and Capacity Determination Support for YeastThe IBex Industry Capability and Capacity Determination Support for Yeast contract seeks to enhance the Department of Defense’s understanding of commercial yeast production and supply capabilities to support contingency operations in remote or hostile environments where commercial infrastructure is undocumented or inaccessible. Through partnerships with industry experts, the program enables the Office of the Under Secretary of Defense for Acquisition and Sustainment to identify, assess, and potentially leverage commercial yeast-related assets during national emergencies or military contingencies. This includes evaluating production volumes, supply chain resilience, logistical capacity, and technical expertise relevant to yeast as a critical component in food, medical, and pharmaceutical applications essential for sustaining military personnel in austere conditions. The solicitation, issued under number SP4701-26-Q-0166 and classified under NAICS code 541614 for management consulting services, is open for responses until August 13, 2026. It is administered by the Defense Logistics Agency through the DCSO Philadelphia office located in Philadelphia, Pennsylvania, with Helena Tuzi serving as the primary point of contact for inquiries. The performance location is also in Philadelphia, and the contract supports broader DLA initiatives to build industrial base awareness and rapid responsiveness. This effort is part of a larger strategy to ensure the availability of essential non-military industrial inputs during crises by embedding commercial sector insights directly into defense planning processes.

Dcso Philadelphia

POSTED

DEADLINE

Relocation of Security/Surveillance System EquipmentThe contract solicitation W912HY26RA023 seeks qualified small businesses to perform the relocation of security and surveillance system equipment at a location with a zip code of 75242. Issued by the Department of Defense through the W076 Endist Galveston office in Galveston, Texas, this is a total small business set-aside under FAR 19.5, meaning only small business concerns are eligible to compete. The solicitation, posted on July 13, 2026, requires responses by July 24, 2026, at 7:00 p.m. Eastern Time, and falls under NAICS code 541614 for other scientific and technical consulting services. The primary point of contact for inquiries is Yvonne Howard, reachable via phone at 409-766-3000 or email at yvonne.howard@usace.army.mil. Offerors must be prepared to execute the relocation work at the designated site with full compliance to all applicable federal regulations and contractual requirements.

W076 Endist Galveston

POSTED

DEADLINE

Data Verification and Record Reconciliation Services

Department of Economic Development

POSTED

DEADLINE

Project Management & Implementation Roadmap Development

DOE02148 - Department of Elementary and Secondary Education

POSTED

DEADLINE

Technical Assistance for Small Business Supplier ReadinessThe contract titled Technical Assistance for Small Business Supplier Readiness aims to deliver operational, technical, and market access support to small businesses operating in strategic sectors to enhance their ability to integrate into critical supply chains. This initiative, managed by the Small Business Administration, targets entities that need guidance and resources to meet the standards, capabilities, and demands of larger suppliers and federal procurement networks. The support provided will likely include training, process optimization, compliance assistance, and connections to procurement opportunities designed to strengthen supplier readiness and long-term sustainability. The contract is structured as a subcontract with a posted date of July 7, 2026, and a response deadline of August 7, 2026, indicating a narrow window for eligible entities to submit proposals. It is classified under NAICS code 541614, which corresponds to management consulting services, suggesting the assistance will be advisory and capacity-building in nature rather than direct service delivery. While no specific geographic limitations or set-asides are noted, the focus is clearly on enabling small businesses to become viable participants in national and defense-relevant supply chains. Participation requires demonstrated capability to deliver targeted, results-oriented support that directly improves supplier qualification and contract competitiveness.

Small Business Administration

POSTED

DEADLINE

Supply Chain Acceleration and Logistics Enablement (SCALE) ProgramThe Supply Chain Acceleration and Logistics Enablement (SCALE) Program is a federal funding opportunity administered by the U.S. Small Business Administration through a Notice of Funding Opportunity, aimed at strengthening small business participation in strategically important supply chains including Advanced Manufacturing, Biotechnology, Defense Industrial Base, Energy, Food Systems, and Transportation Infrastructure. Organizations applying must design and implement technical assistance and workforce development initiatives that reduce operational, technical, and market access barriers for small suppliers, with the goal of improving supplier readiness, production capability, and integration into critical sectors. The program supports a two-year performance period from September 30, 2026, to September 30, 2028, with a maximum award amount of $500,000 per recipient and no option periods; proposals must be submitted electronically via Grants.gov by August 7, 2026, and require a current Unique Entity Identifier from SAM.gov, with no requirement for the applicant to self-certify as a small business. The evaluation process is strictly quantitative, scoring proposals out of 100 points based on five primary criteria: Small Business Support Programming (45 points), Supply Chain Challenge and Opportunity (20 points), Milestones and Outcomes (15 points), Relevant Experience and Past Performance (8 points), and Organizational Mission and Viability (4 points), with additional points for Project Team and Management Approach and Data Collection and Reporting. Award decisions follow a trade-off process favoring technical merit over cost, with portfolio balance considered to avoid duplication across similar industries. Special requirements include a maximum of 49% subcontracting, a 15% de minimis indirect cost rate unless a negotiated rate exists, no pass-through entities permitted, prohibition on financial interest or equity in served businesses, and strict compliance with 2 CFR Parts 200 and 2701, OMB A-133 audit standards, and conflict of interest policies. Applicants must submit a cover letter, technical proposal, organizational qualifications, resumes of key personnel (max 2 pages each), an organizational chart, contracts or consulting agreements if applicable, and a detailed budget using SF-424A, all formatted in 12-point Times New Roman, single-spaced, within specified page limits. Financial reporting is required through SF-425, with final reports due 120 days post-performance period, and all certifications regarding debarment, tax compliance, and drug-free workplace are verified through SAM.gov rather than submitted

Small Business Administration

POSTED

DEADLINE

More opportunities from Social Security Administration → Office of Acquisition and Grants

Same awarding agency

Request for Information Life Safety Station PrograThe U.S. Social Security Administration through its Office of Acquisition and Grants is issuing a Request for Information to identify qualified vendors capable of developing and managing a nationwide, turnkey Standardized Life Safety Station Program across all agency facilities. This initiative aims to establish a unified system that ensures consistent life safety standards, operational efficiency, and regulatory compliance at every location under the agency’s jurisdiction. Vendors must demonstrate expertise in designing, implementing, and sustaining comprehensive life safety solutions that are scalable, maintainable, and aligned with federal safety codes and best practices. Responses are due by July 31, 2026, and all submissions must be directed to the designated contracting officer, Vanessa Jamison, at vanessa.jamison@ssa.gov. The solicitation is classified under NAICS code 532490, indicating it pertains to other real estate activities, and is open to all responsible parties without specific set-aside limitations. The program requires a vendor to deliver a fully integrated solution including equipment, training, documentation, maintenance protocols, and ongoing support, ensuring seamless integration with existing federal infrastructure. All performance activities will occur nationwide, with no specific geographic restrictions identified. Further details and submissions are accessible via the FedConnect portal using the solicitation number 28321326RI0000037.

Other Commercial and Industrial Machinery and Equipment Rental and Leasing

POSTED

DEADLINE

renewal of LEADTOOLS PDFThe contract is a renewal solicitation for the LEADTOOLS PDF Document Imaging Subscription, previously awarded under contract number 28321325P00050130, aimed at maintaining essential document imaging capabilities for the Social Security Administration. The solicitation, numbered 28321326Q00000102, was posted on July 16, 2026, with a response deadline of July 22, 2026, and falls under NAICS code 513210, identifying it as a software publishing service. The Office of Acquisition and Grants within the Social Security Administration is managing the procurement, with no set-aside designation applied, meaning it is open to all eligible vendors regardless of business size or category. The place of performance is unspecified, but the contract supports federal operations in the United States. Keelin McGrath, Contracting Officer, serves as the sole point of contact for inquiries and can be reached via email at keelin.mcgrath@ssa.gov. The solicitation is issued through FedConnect, with the official posting accessible via the provided link, and is intended to ensure continued access to critical PDF and document imaging tools required for operational efficiency. Bidders must submit their quotes in response to this solicitation by the stated deadline, ensuring compliance with federal procurement protocols and providing evidence of their ability to deliver the renewed subscription service without disruption to current systems or workflows.

Software Publishers

POSTED

DEADLINE

Videk DocuVision 8600 Track and Trace SystemThe contract pertains to the maintenance of the Videk DocuVision 8600 Track and Trace System for print operations over a 12-month period, ensuring continuous functionality and operational reliability for federal print processes. The solicitation, issued under number 28321326Q00000157 by the Social Security Administration’s Office of Acquisition and Grants, is classified under NAICS code 541519 and is open to federal contractors. The posting date is July 14, 2026, with a response deadline of July 20, 2026, at 3:00 PM Eastern Time. All performance is expected to be carried out within the United States, with no specific city or state designated for the place of performance. The Contracting Officer for this solicitation is Vachael Mulbah, who can be reached at vachael.mulbah@ssa.gov for inquiries. The solicitation is accessible online through the FedConnect portal, and no set-aside designation is specified, meaning it is open to all eligible vendors without restrictions based on business size or ownership type.

Other Computer Related Services

POSTED

DEADLINE

Data Retrieval UnavailableThe contract is a subcontract related to data retrieval services, with a NAICS code of 518210, indicating a focus on data processing, hosting, and related services. It was posted on July 10, 2026, with a response deadline of July 27, 2026, and falls under the SBA set-aside category, suggesting eligibility preferences for small business concerns. The contracting agency is the Social Security Administration through its Office of Acquisition and Grants, though specific performance location and point of contact details are unavailable. Access to the full contract details is currently blocked due to technical issues, and the official link to the solicitation is provided through FedConnect for potential bidders seeking further information.

Computing Infrastructure Providers, Data Processing, Web Hosting, and Related Services

POSTED

DEADLINE

RFQ for Video Remote Interpreting ServicesThe Social Security Administration is seeking qualified vendors to provide Video Remote Interpreting services under a Blanket Purchase Agreement established through the General Services Administration’s Multiple Award Schedule. This solicitation, identified by number 28321326Q00000126 and posted on July 10, 2026, with responses due by July 27, 2026, aims to secure on-demand and scheduled interpreting support for Deaf and Hard of Hearing individuals across all SSA field offices and operational units nationwide. The services are critical to ensuring effective communication and compliance with accessibility requirements, enabling equitable access to SSA programs and services. Vendors must hold a GSA MAS contract and meet the specific requirements for delivering high-quality, linguistically accurate, and technologically reliable remote interpreting solutions. The procurement is classified under NAICS code 541930 and is set aside for small business concerns as defined by the Small Business Administration. The contracting officer for this action is Juan Requena, reachable via email at juan.requena@ssa.gov, and all submissions must be made through the FedConnect portal. Performance of the services is expected to occur nationwide, with no specific geographic limitations designated. The agreement will allow SSA to efficiently scale interpreter services based on demand, supporting a wide range of in-person and virtual interactions while maintaining confidentiality, consistency, and compliance with federal accessibility standards.

Translation and Interpretation Services

POSTED

DEADLINE

Toner Cartridge Recycling ProgramThe contract is for a toner cartridge recycling program requiring the management of EPA-compliant recycling services for used toner cartridges through pre-paid return labels, ensuring proper disposal and environmental compliance. The contractor must handle the logistics of collecting, transporting, and processing cartridges in accordance with federal environmental regulations and provide detailed, regular reporting on recycling volumes to document adherence and performance. The program is structured as a subcontract under the Office of Acquisition and Grants of the Social Security Administration, with the North American Industry Classification System code 562920 indicating it falls under Other Waste Management Services. Responses are due by July 23, 2026, and the posting date is July 9, 2026. The place of performance and point of contact details are not specified, and no set-aside status is assigned. Participation requires access to the FedConnect portal for full solicitation details.

Materials Recovery Facilities

POSTED

DEADLINE

Full-Service Maintenance and Help Desk SupportThe contract titled Full-Service Maintenance and Help Desk Support encompasses ongoing preventive maintenance, timely repairs, network configuration services, and comprehensive 24/7 helpdesk support accessible via a toll-free number. It includes SNMP monitoring for proactive network health assessment and field dispatch capabilities to address on-site technical issues, ensuring continuous operational reliability. The scope is designed to maintain high system availability and rapid response times for critical infrastructure. Issued by the Social Security Administration’s Office of Acquisition and Grants under NAICS code 811212, this subcontract opportunity was posted on July 9, 2026, with responses required by July 23, 2026. The place of performance and specific geographic details are not specified, indicating potential nationwide service delivery. Interested parties must respond through the FedConnect portal before the deadline to be considered for award.

Computer and Office Machine Repair and Maintenance

POSTED

DEADLINE

Operator Training ServicesThe contract requires the provision of operator training services for key government personnel, mandating that at least one primary operator and one alternate be trained on each machine within three business days following installation. Training must be comprehensive and delivered promptly to ensure operational readiness, with the option for follow-up sessions if additional support is necessary to achieve proficiency. The training is tied directly to the deployment of equipment, emphasizing timely knowledge transfer to maintain continuity and security in government operations. This subcontract falls under NAICS code 611430 and is issued by the Social Security Administration’s Office of Acquisition and Grants, with a posted date of July 9, 2026, and a response deadline of July 23, 2026. The contract does not specify a place of performance or point of contact, and no set-aside type is indicated, suggesting it is open to all eligible subcontractors. The solicitation is accessible via the FedConnect platform, indicating a federal procurement process governed by standard federal contracting protocols.

Professional and Management Development Training

POSTED

DEADLINE

Nationwide Installation and Setup ServicesThe contract encompasses the nationwide delivery, unpacking, installation, setup, and configuration of high-volume printers across all Social Security Administration offices, ensuring seamless integration into existing environments. Services include the complete removal of packaging waste following installation and thorough functionality verification to confirm all units operate as required. The work must be performed consistently across all locations to maintain uniformity and reliability in printing infrastructure. The solicitation is classified as a subcontract under NAICS code 541519 and is managed by the Office of Acquisition and Grants within the Social Security Administration. Responses are due by July 23, 2026, with the opportunity posted on July 9, 2026, and all performance activities are expected to occur at SSA facilities throughout the United States.

Other Computer Related Services

POSTED

DEADLINE

High-Volume Production Printer SupplyThe contract calls for the supply of new, unused high-volume production printers designed for heavy-duty office environments, with a minimum monthly duty cycle of 500,000 pages and a print speed of 135 pages per minute. Each unit must feature automatic duplexing, a 2,500-sheet paper capacity, and a resolution of 1200 x 1200 dpi to ensure high-quality output under demanding conditions. The equipment is intended to meet the operational needs of a government agency requiring reliable, large-scale printing capabilities without interruption. This subcontract under the NAICS code 334118 is issued by the Social Security Administration’s Office of Acquisition and Grants, with a response deadline of July 23, 2026. The solicitation was posted on July 9, 2026, and all proposals must be submitted by the specified closing time. The place of performance and point of contact details are not provided, but all awarded contracts will be managed through the official FedConnect portal linked in the posting. There is no set-aside designation, meaning any qualified vendor may respond regardless of business size or category.

Computer Terminal and Other Computer Peripheral Equipment Manufacturing

POSTED

DEADLINE

High Volume Production PrintersThe Social Security Administration through its Office of Acquisition and Grants is seeking proposals for high-volume production printers to support Disability Determination Services offices across the nation. The goal is to enhance public service delivery by upgrading printing capabilities in SSA offices, ensuring timely and accurate document production critical to disability claims processing. This solicitation, identified by number 28321326RI0000036, was posted on July 9, 2026, with responses due by July 23, 2026, and falls under NAICS code 541512 for computer systems design services. The requirements are directed at vendors capable of supplying robust, scalable printing solutions capable of handling large-scale document output in a federal environment. All performance will occur at SSA offices nationwide, with no specific location designated for delivery. The contracting officer for this effort is Deborah Briscoe, who can be reached at deborah.briscoe@ssa.gov for inquiries. There is no set-aside designation specified, meaning the opportunity is open to all eligible contractors without preference given to small businesses or other categories. Interested parties must submit responses through the FedConnect portal as linked in the solicitation details. The procurement reflects a strategic effort to modernize infrastructure within DDS offices to meet growing demand and improve efficiency in service provision to the public.

Computer Systems Design Services

POSTED

DEADLINE

Subcontract Opportunity Decomposition Not AvailableAccess to the prime contract details required for subcontract opportunity decomposition is currently unavailable due to a system authentication error, preventing the retrieval of the Statement of Work, CLINs, or any related metadata necessary to proceed. The solicitation, posted on July 8, 2026, with a response deadline of July 22, 2026, is categorized as a subcontract under the SBA set-aside program, though no specific set-aside description is provided. The NAICS code is listed as 999999, indicating an unclassified or placeholder category, and no organization type, point of contact, or physical location details are available. The contracting agency is the Social Security Administration through its Office of Acquisition and Grants, with no specified place of performance or address information. Interested parties may access the solicitation via the FedConnect portal, but without authentication to the underlying prime contract data, meaningful participation or proposal development is not currently feasible.

POSTED

DEADLINE