This Government Contract opportunity from Texas was posted on July 15, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Warranty and Preventive Maintenance Services

Closed

State & Local

Submission Closed07/30/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811310

New

SLED

Water Filtration System Maintenance and Repairs at San Angelo State Supported Living Center

Solicitation # HHS0017602

The Texas Health and Human Services Commission through its Procurement and Contracting Services division is soliciting competitive bids for as-needed maintenance and repairs to water filtration systems at the San Angelo State Supported Living Center. The solicitation, identified as HHS0017602, was posted on July 31, 2026, with responses due by August 14, 2026, at 4:30 PM Central Time. This contract opportunity is open to vendors capable of providing timely and reliable services to ensure the proper functioning of water filtration systems critical to the health and safety of residents at the facility. The place of performance is located in Texas, and all work must be performed at the specified site without exception. The contracting authority is the Health and Human Services Commission, operating under the state of Texas as a state-level government entity. Primary point of contact for inquiries regarding the solicitation is David Martinez, reachable via email at David.Martinez01@hhs.texas.gov or by phone at 512-406-2597. Additional details, including submission guidelines and requirements, can be accessed through the official procurement portal at the provided UI link. There is no set-aside designation specified for this solicitation, meaning it is open to all qualified vendors regardless of business size or ownership characteristics. Vendors are expected to respond with comprehensive proposals detailing their experience, service approach, response times, and pricing structure for both routine maintenance and emergency repairs within the specified timeframe.

Health and Human Services Commission

POSTED

DEADLINE

High voltage repair switch gears, high voltage repair for Richmond State Supported Living Center

Solicitation # HHS0017495V2

The contract solicitation, identified as HHS0017495V2, seeks proposals for high voltage repair switch gears and associated high voltage repair services at the Richmond State Supported Living Center in Texas. All activities and deadlines are governed by Central Time, with responses required by 10:30 AM on August 21, 2026, to be received via the Electronic State Bid Directory. An optional on-site visit is scheduled for August 6, 2026, at 10:00 AM to provide bidders with visibility into the worksite. Any questions or clarifications must be submitted by August 10, 2026, and responses to those inquiries will be published as an addendum on August 13, 2026. The anticipated contract start date is September 1, 2026. The solicitation is managed by the Texas Health and Human Services Commission, with Byron Wright serving as the primary point of contact, reachable via email and phone. The contract falls under the SLED category and can be accessed online through the provided TX SmartBuy portal.

Health and Human Services Commission

POSTED

DEADLINE

Truck-Mounted Attenuators (TMA) Supply and ServiceThe contract covers the provision, installation, maintenance, and repair of truck-mounted attenuators designed for work zone impact protection. It is classified as a subcontract under NAICS code 811310, indicating services related to automotive maintenance and repair, and is managed by FAS - Purchasing under the Washington agency office. The solicitation was posted on July 31, 2026, with a submission deadline of September 14, 2026, requiring vendors to deliver comprehensive support services for TMA units used in highway and roadway work zones. The scope demands reliable performance and compliance with safety standards for dynamic impact absorption, ensuring protection for workers and motorists. The place of performance and point of contact details are unspecified, but the work is expected to support federal or state transportation projects within the Washington region. All services must be performed in accordance with industry best practices and contractual obligations for responsive, timely maintenance and emergency repairs.

POSTED

DEADLINE

XJF Compressor Rebuild

Solicitation # FA466126Q0071

The 7th Contracting Squadron is soliciting quotations for the rebuild of XJF151N compressors under solicitation FA466126Q0071, a Firm-Fixed Price contract issued as a total small business set-aside under NAICS code 811310. The work requires a complete overhaul of the compressors including diagnostic evaluation, replacement of internal seals and gaskets, functional verification, and proper disposal of removed components in compliance with OSHA and EPA standards, all to be performed at Dyess Air Force Base, Texas. All submissions must be received via email no later than 6 August 2026 at 3:00 p.m. CDT, following amendments that extended the original deadline from 31 July 2026. The solicitation references a Statement of Work and a Questions and Answers document as attachments, and offers must comply with all applicable regulatory and contractual requirements including the prohibition of certain chemicals, foreign supply chain restrictions, and cybersecurity protections mandated by DFARS 252.204-7012 and NIST SP 800-171. Offerors are required to provide valid Unique Entity ID and CAGE codes, certify small business status, and submit a Small Business Subcontracting Plan. The evaluation will be based on best value, considering technical acceptability, period of performance, and price, without a formal weighting system or lowest price technically acceptable threshold. Delivery is FOB destination to Dyess AFB, payment will be processed through Wide Area WorkFlow using DoDAAC F87700, and all items must be properly marked with country of origin and domestic content percentages as required by Buy American provisions. The Government retains full authority to inspect, accept, or reject deliverables and reserves the right to cancel the solicitation at any time without compensation to offerors.

POSTED

DEADLINE

NWS HVAC PREVENTIVE MAINTENANCE (PM) MULTIPLE LOCA

Solicitation # 1305M326Q0383

The solicitation seeks quotations for comprehensive HVAC preventive maintenance services across multiple National Weather Service locations in New Jersey, including Weather Forecast Offices, Maintenance Annexes, and NEXRAD sites in Mount Holly and Fort Dix. The contract is for non-personal services requiring all labor, equipment, and materials necessary to perform scheduled maintenance in accordance with the Statement of Work, which governs the base year and up to four option years. The government intends to award a single fixed-price purchase order on an all-or-none basis to the lowest-priced, technically acceptable offeror, with payment terms of Net 30. This is a commercial acquisition conducted under FAR Part 12, and no separate written solicitation will be issued; responses must be submitted by the deadline of August 10, 2026. All responsible sources may submit quotations, but contractors are solely responsible for confirming receipt of their submissions. Applicable Department of Labor wage rates are available via SAM.gov or the solicitation attachments, and entities should note that outdated SAM representations will not impact award decisions under the NOAA deviation in effect. The point of contact for inquiries is Jamie R. Rosales at NOAA's Seattle office.

Department Of Commerce Noaa

POSTED

DEADLINE

MTU 6V92 Overhaul & Repair Services

Solicitation # 70Z04026Q51502B00

This solicitation seeks overhaul and repair services for MTU 6V92 marine engines installed on the 47-foot Motor Lifeboat, issued on a brand-name basis and restricted exclusively to authorized Original Equipment Manufacturer repair facilities using OEM parts. The solicitation number is 70Z04026Q51502B00, with a combined synopsis and solicitation posted on July 23, 2026, and a response deadline of July 31, 2026, at 6:00 p.m. EDT. The contracting office is the SFLC Procurement Branch 3 under the Department of Homeland Security, located in Baltimore, Maryland, with performance required at Curtis Bay, Maryland. All responses must adhere to the specifications outlined in the attached documents, including the revised CSS, schedule, overhaul specifications, Amendment 01 SF-30, and Questions and Answers document, which collectively define the technical and procedural requirements for submission. Only OEM-authorized facilities are eligible to respond, ensuring compliance with manufacturer standards and part authenticity. No set-aside programs are applied to this procurement. Point of contact for inquiries is Tracy L. Jacobs, with Derek W. Lazaroff as secondary contact, both reachable via official U.S. Coast Guard email addresses. While key sections such as evaluation factors, pricing, delivery terms, inspection criteria, and special requirements are not detailed in the provided documentation, the restriction to OEM facilities and mandatory use of original parts serve as critical eligibility and quality control parameters. The contract value and financial terms are not disclosed, and no information is available regarding payment processes, contract administration, or required certifications beyond the OEM authorization requirement.

Sflc Procurement Branch 3(00040)

POSTED

DEADLINE

Solicitation # W50S6P26QG001

This contract seeks a small business to fully restore two JLG Model 800AJ aerial lifts to mission-ready condition at Hangar 207, Little Rock Air Force Base, Arkansas. The work includes all necessary parts, labor, tools, equipment, and transportation required to perform comprehensive repairs, annual inspections, and preventative maintenance on both units as defined in the Statement of Work. The contract is a total small business set-aside under NAICS code 811310 with a size standard of $12.5 million, and applicable Service Contract Act wage determinations must be followed. All work must be completed within 30 days of contract award, and vendors are required to submit firm-fixed-price quotes by August 14, 2026, at 10:00 a.m. CDT, with quotes remaining valid through September 30, 2026. Proposals must include detailed capability statements demonstrating understanding of the SOW and ability to meet all technical requirements. Awards will be made to the lowest-priced quote that fully complies with the solicitation. Questions must be submitted by August 6, 2026, to the designated point of contact.

W7MW Uspfo Activity Arang 189

POSTED

DEADLINE

Solicitation # M0068126Q0054

This solicitation, numbered M0068126Q0054 and titled Scissor Lift Repair, seeks services to repair one Autoquip scissor lift located in building 2251 aboard Marine Corps Base Camp Pendleton, California, in support of U.S. military personnel and equipment. The contract is structured as a sources-sought solicitation and is exclusively set aside for total small business participation under FAR 19.5, with the NAICS code 811310. Required repairs include the provision and installation of key components such as a base frame, cylinders, and hosing to restore the equipment to full operational status. Contractors must conduct a mandatory site visit to validate repair needs, remove damaged parts from the building, install new components, and perform operational testing prior to final inspection. The work must comply with OSHA Standard 1910.23e, requiring fixed handrails at 48 inches high with a midrail and 4-inch kick plate. Additionally, the installer must be certified by White Systems to maintain warranty validity. Base access is required to perform the work, and all activities must be conducted in accordance with military installation protocols. The Government Technical Point of Contact will be designated post-award to assist with technical clarification and problem resolution but holds no authority to modify contract terms or issue directives; only the Regional Contracting Office MCI-WEST in Camp Pendleton may approve changes. Quality acceptance is determined by the TPOC based on the contractor's quoted materials and the description of work provided at the time of solicitation, and no formal Quality Assurance Surveillance Plan is in place. The repair schedule begins after the contractor receives the necessary parts, with milestones including site visit, material furnishing, installation, and final inspection all marked as TBD. The contract does not specify delivery terms, payment details, period of performance, or total estimated value. Proposals must be submitted by the deadline of August 11, 2026, with primary point of contact for inquiries being Brandon Ruess at 760-725-8453 or brandon.ruess@usmc.mil. Steve Elggren is also listed as a point of contact for administrative coordination.

POSTED

DEADLINE

FA441826Q0079-FY26 841st Dock Fender Repair

Solicitation # FA441826Q0079

This solicitation, identified as FA441826Q0079, is a Firm-Fixed Price, Small Business Set-Aside under NAICS code 811310 for the repair of dock fender hardware at Joint Base Charleston, South Carolina, for the 841st Transportation Battalion. The contractor is responsible for supplying and installing marine-grade hardware including 22 swivel-eye end assemblies, 32 sets of 1-1/2” hot-dipped galvanized bolt-type shackles (reduced from 44), and 44 316 stainless steel cotter keys, all meeting Federal Specification RR-C-271D, Type IVB, Class 3, and compatible with existing 1-3/4” Grade 3 chain. The work involves removing and replacing fenders, specifically the first fender located at the southwest end of the dock adjacent to fuel lines, which requires water and boat access for repair; for all other fenders, boat use is at the contractor’s discretion. The government will assist in dockside movement and lifting of all fenders except the first one, but the contractor must provide 24 hours’ advance notice for coordination. The stated Period of Performance has been shortened from four weeks to two business days, and the contractor must submit a detailed schedule for fender delivery and repair timelines. The fender model specification is Seaguard 4x17 (SG 4.0 x 17.0). All work must comply with the Statement of Work and include site restoration and final inspection by the Civil Engineering Squadron and the 841st Transportation Battalion, with acceptance occurring at the delivery location. The solicitation requires all offerors to comply with stringent site visit protocols, including submitting completed JB CHS Form 111, company SAM UEI/CAGE code, and color scanned copies of valid Real ID or driver’s license paired with a passport for each attendee by July 27, 2026, to gain access to Joint Base Charleston. The site visit, scheduled for July 29, 2026, at 9:00 AM EST, must be attended in person at the designated visitors center; failure to comply results in denial of entry. Questions arising from the site visit must be submitted electronically by July 30, 2026, to the Contract Specialist. Proposals are due by August 10, 202

POSTED

DEADLINE

Semi-Annual Walk-in Cooler Service in Parlier, California

Solicitation # 1232SA26Q1145

A site visit is scheduled for Thursday, 6 August at 9:00 AM local time at 9611 S. Riverbend Ave., Parlier, CA 93648, and will be the only opportunity for prospective offerors to inspect the location where 33 walk-in coolers require semi-annual maintenance and repair. This solicitation, numbered 1232SA26Q1145, is issued as a combined synopsis and request for quotation under FAR Part 12, with no separate written solicitation to follow._quotes are due by 10:00 PM Eastern Time on Thursday, 14 August 2026. The requirement is set aside entirely for small business concerns, with the North American Industry Classification System code 811310 for commercial and industrial machinery and equipment repair and maintenance, and the small business size standard is $12.5 million in average annual receipts. All responsible small businesses may submit a quotation, and the award will be made based on commercial practices and competitive pricing. The contracting office is under the USDA ARS AFM APD, located in Beltsville, Maryland, with Kerrie Hodges as the primary point of contact. Performance of the work will occur entirely in Parlier, California.

POSTED

DEADLINE

Engine Container Inpsection/Repair - amendment

Solicitation # N0018925QZ0980001

The solicitation N0018925QZ0980001, issued by NAVSUP Fleet Logistics Center Norfolk on behalf of the Department of Defense, seeks qualified small business contractors to perform inspection, maintenance, and repair services on F414 Engine Containers under an indefinite-delivery, indefinite-quantity (IDIQ) structure with a five-year ordering period from March 30, 2026, to March 29, 2030. Performance is centered at the Aviation Supply Office in Philadelphia, Pennsylvania, with final inspection and acceptance occurring at the government destination address. The contract requires compliance with detailed technical specifications outlined in military manuals and drawings, including AG-0830AC-000-MEB Work Packages 003 and 039, and mandates adherence to strict packaging, preservation, and marking standards such as MIL-D-16791 Type 1 detergent, MIL-D-3464 Type I desiccant, and DFARS 252.211-7003 for Item Unique Identification (UII) marking and IUID Registry registration. All work must meet a 100% inspection requirement with no rework and deliverables must be submitted with supporting documentation, including monthly progress reports and final technical reports. The solicitation is set aside for small businesses, with specific provisions for HUBZone and other socioeconomic categories, and requires offerors to submit electronic proposals in two volumes—non-price and price—limited to 15 pages for Volume I and submitted exclusively via email to Coleen Johnson by the deadline of January 9, 2026. Evaluation will be based on a trade-off process favoring technical merit over price, with equal weighting given to Performance Approach and Past Performance, each requiring at least an Acceptable and Satisfactory Confidence rating respectively. Contract administration follows WAWF invoicing procedures, and contractors must comply with a broad suite of FAR and DFARS clauses covering ethics, whistleblower protections, supply chain security, prohibited ByteDance applications, executive compensation reporting, cybersecurity practices aligned with NIST SP 800-171, and restrictions on subcontracting percentages for similarly situated small businesses. No contract value is specified due to the absence of pricing data, and payment details including the DoDAAC and ACRN will be finalized at award.

Navsup Flt Logistics Ctr Norfolk

POSTED

DEADLINE

Carbon Dioxide Scrubber Pre-Arrival Testing/Inspection

Solicitation # N4215826QS019

The contract pertains to the pre-arrival testing and inspection of a carbon dioxide scrubber, requiring a qualified vendor to perform detailed evaluations prior to the equipment’s delivery. The work is governed by an attached Statement of Work that outlines the specific technical procedures, acceptance criteria, and documentation standards necessary to ensure operational readiness and compliance with naval requirements. This solicitation, identified by number N4215826QS019, was posted on July 31, 2026, with responses due by August 3, 2026, and is open to all eligible contractors without any set-aside limitations. The work must be performed at the designated place of performance in Groton, Connecticut, while the contracting office is based at the Norfolk Naval Shipyard in Portsmouth, Virginia, under the Department of Defense. The primary point of contact is Lillian Kwong, reachable via email and phone, with Devlin Horton serving as the secondary contact for coordination. The North American Industry Classification System code 811310 indicates the scope falls under repair and maintenance services for industrial machinery and equipment.

Norfolk Naval Shipyard Gf

POSTED

1 day ago

DEADLINE

in 2 days

AI Contract Overview

The contract titled Warranty and Preventive Maintenance Services is a subcontract issued by the Texas Department of Criminal Justice for ongoing maintenance activities including lubrication, safety inspections, and replacement of parts covered under warranty or existing service agreements. The work is intended to ensure the continued operational safety and functionality of equipment under the agency’s jurisdiction, with all services performed in accordance with established preventive maintenance standards. The solicitation was posted on July 15, 2026, and responses are due by July 30, 2026, with the NAICS code 811310 indicating it falls under commercial and industrial machinery and equipment repair and maintenance. The place of performance and specific location details are not provided, and no set-aside status or point of contact information is included in the dataset. The contract may be accessed through the Texas SmartBuy portal.

General Info

Warranty and preventive maintenance for equipment per Texas Department of Criminal Justice, due July 30, 2026.

Agency

Texas Department of Criminal Justice

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and MaintenanceView NAICS

Place of Performance

TX, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedJul 15

subcontract

Response DeadlineJul 30

Deadline has passed

Submission Closed

07/30/2026, 09:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyTexas Department of Criminal Justice

ContactsNo contacts available

OfficeN/A

Organization / Agency

Texas Department of Criminal Justice

Office AddressN/A

ContactsNo contact information available

Full Description

Ongoing maintenance, lubrication, safety inspections, and parts replacement under warranty or service agreement.