This Government Contract opportunity from Nevada was posted on July 14, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Emergency and On-Call Boiler Repairs Countywide

Closed

State & Local

Submission Closed08/03/2026, 11:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811310

New

Federal

Warranty and Post-Delivery Support ServicesThe contract requires the provision of warranty-period repair, replacement, technical support, and field service for an electric bone drill, all in strict accordance with the manufacturer’s warranty terms. Services must be delivered promptly and effectively to ensure continued operational reliability of the device, with a focus on minimal downtime and full compliance with established technical and safety standards. All support activities, including diagnostics, parts replacement, and on-site field service, are to be performed in accordance with the manufacturer’s specifications and within the defined warranty period. This is a small business set-aside subcontract under NAICS code 811310, assigned to the Department of Veterans Affairs through the 262-NETWORK Contract Office 22. The performance location is specified as San Diego, CA, with a zip code of 92161. The solicitation was posted on August 4, 2026, and responses are due by August 12, 2026. Only entities qualifying as small businesses under SBA guidelines are eligible to bid, and the contract is structured to prioritize local or regional service providers capable of meeting the technical and logistical demands of supporting medical equipment in a federal healthcare environment.

262-NETWORK Contract Office 22 (36C262)

POSTED

DEADLINE

Preventative Maintenance of T2100 Treadmill ST for Cardiac Stress TestingThe contract requires timely execution of comprehensive preventative maintenance on T2100 Treadmill ST units utilized in cardiac stress testing environments, encompassing mechanical and electrical inspections, precision calibration, safety testing, and software diagnostics to ensure operational integrity and patient safety. All work must adhere to established clinical and equipment standards to maintain the reliability of these critical medical devices used in diagnostic procedures. The contract is designated as a subcontract under NAICS code 811310 and is managed by the Department of Veterans Affairs through the 247-NETWORK Contract Office 7, with a strict response deadline of August 5, 2026, at 4:00 PM. The scope demands specialized technical expertise and compliance with medical equipment maintenance protocols, though specific location details and point of contact information are not provided. All activities are expected to be performed with precision to support the continuous functionality of treadmills integral to cardiac stress testing workflows.

247-NETWORK Contract Office 7 (36C247)

POSTED

DEADLINE

Post-Delivery Technical Support and Maintenance ServicesThe contract covers ongoing maintenance, calibration, and repair services for the Steris AMSCO 600LS sterilization unit located at the Boise VA Medical Center, ensuring continuous operational reliability of this critical healthcare equipment. Services are required to be performed in accordance with manufacturer specifications and industry standards to maintain compliance with safety and sterilization protocols essential for patient care. The work is classified under NAICS code 811310, indicating it is a technical maintenance and repair service, and is structured as a subcontract under the Department of Veterans Affairs through Rpo East. The solicitation was posted on August 4, 2026, with a response deadline of August 7, 2026, indicating a short turnaround for proposers to submit qualifications and service plans. The place of performance is tied directly to the Boise VA Medical Center, requiring on-site presence and rapid response capabilities for emergency repairs. The contract does not specify a set-aside status or point of contact, and no detailed funding or performance metrics are included in the provided data, but the nature of the equipment necessitates qualified technicians with experience in high-level medical sterilization systems.

POSTED

DEADLINE

Post-Delivery Support and Maintenance Services

255-NETWORK Contract Office 15 (36C255)

POSTED

DEADLINE

Repair of Kell-Strom T-400 Riveter

Solicitation # N68520-26-SIMACQ-JC00000-0250

The Navy’s Naval Air Systems Command is seeking to sole-source the repair of a legacy T-400 riveter, asset number 65923043611, to Kell-Strom Tool Co. as the only known source capable of performing the complex, iterative repair process required. This unit demands a specialized troubleshooting methodology where faults are only revealed after prior issues are resolved, necessitating repeated test-and-repair cycles that typically involve custom fabrication or replacement of nearly all internal components to restore proper clamping, alignment, and riveting capabilities. Kell-Strom’s unique access to OEM-licensed technical data, proprietary tooling, and specialized test facilities makes it the only responsible contractor capable of meeting the demanding technical and timeline requirements. The work includes initial diagnostic inspection, ongoing serial repair cycles, component fabrication or procurement, and final calibration to meet original equipment manufacturer specifications. Deliverables include a fully restored and tested riveter, a detailed repair and fabrication summary documenting all faults and replacement parts, and a certified test report verifying compliance with P&WC OEM safety, precision, and performance standards. The solicitation, issued under number N68520-26-SIMACQ-JC00000-0250 with a response deadline of August 19, 2026, will be evaluated based on technical capability, price, and past performance. The place of performance is Cherry Point, North Carolina, and the contract falls under NAICS code 811310 with no set-aside designation. Primary point of contact is Daniel Collins of the Department of Defense, based at Patuxent River, Maryland.

Naval Air Systems Command

POSTED

DEADLINE

AIRFIELD LEAKING TRANSFORMER

Solicitation # 31125260000817

The contract requires the comprehensive removal and replacement of existing airfield lighting transformers at U.S. Coast Guard Base Cape Cod on Joint Base Cape Cod in Buzzards Bay, Massachusetts, with new units meeting precise technical specifications. The scope covers three primary transformers: two single-phase 37.5 KVA units from McGraw Edison—Transformer 413 near Building 614 and Runway 23, and Transformer 523 near Building 614 and Runway 14—and one three-phase 1500/1680 KVA unit from ABB, which was previously misidentified in the Statement of Work as Transformer 232177 but must now be replaced according to the corrected description: Transformer 138613, located adjacent to Building 3181 apron, with a 1000/1120 KVA rating, 4160GRDy/2400 high voltage, 480Y/277 low voltage, and 329 gallons of mineral oil. The contractor is responsible for verifying all existing transformer details, securing power, removing and disposing of old units at their own expense off-base, installing new transformers per manufacturer guidelines, and restoring full operational functionality with testing. Special attention is required for the ABB transformer regarding potential oil leaks, including thorough investigation and submission of replacement or repair feasibility analysis. An optional fourth transformer, a 15 KVA single-phase unit from Southeastern Transformer Co near Building 195 and Runway 5, is available for separate bid consideration. The contract imposes strict performance, safety, and compliance obligations. All work must be completed within 45 calendar days of the Notice to Proceed, with equipment delivered FOB destination. Personnel must be fully qualified, with skilled labor and on-site supervision that can read, write, and speak English, and who are authorized to approve minor changes under $2,000. Daily logs must be submitted weekly to the Contracting Officer’s Representative (COR), who also conducts inspections and final acceptance. The contractor must comply with NFPA 70, FAA regulations, OSHA standards, Joint Base Cape Cod fire and safety protocols, including mandatory hot work permits for welding or burning. Environmental and hazardous material rules apply: all displaced materials require proper documentation via bill of lading, landfill receipts, and recycler permits, and any hazardous substances used or encountered must be reported immediately to the COR with

POSTED

DEADLINE

41--COMPRESSOR,REFRIGER, IN REPAIR/MODIFICATION OF

Solicitation # N0010426RLC39

The contract pertains to the repair or modification of a refrigeration compressor with NSN 7H-4130-014695749, with a quantity of six units to be delivered FOB origin. The Government does not hold the data rights necessary to procure or contract for repairs from alternate sources, and it has been determined that acquiring such data or reverse engineering the part is uneconomical. Potential offerors must ensure that their product, service, or manufacturer meets all specified qualification requirements at the time of award, as mandated by FAR clause 52.209-1. Technical documentation such as Military and Federal Specifications, Qualified Products Lists, and Military Handbooks can be accessed through the DoD Single Stock Point via DAPS in Philadelphia or via the ASSIST-Online portal at http://quicksearch.dla.mil/, though drawings, patterns, and deviation lists are not available through these channels. Interested parties without internet access may contact the DODSSP Help Desk or mail requests to the DLA Document Services address. This procurement does not follow FAR Part 12 commercial item acquisition policies, but vendors may still propose commercial items within 15 days of this notice if capable of satisfying the requirement. The solicitation number is N0010426RLC39, with a response deadline of September 18, 2026, and the point of contact is Cody Smith of the Naval Supply Systems Command Weapon Systems Support, located in Mechanicsburg, Pennsylvania.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Mechanical Services Trades at Various Water Pollution Control Facilities 2026

Solicitation # 38307

The solicitation for Mechanical Services Trades at Various Water Pollution Control Facilities in 2026, identified by solicitation number 38307, is issued by the Connecticut Department of Administrative Services Procurement under the SLED classification. Proposals must be submitted by the deadline of August 18, 2026, at 3:00 PM, but no electronic responses are accepted, and questions posted on the website will not be addressed. Interested parties must refer to the official RFP document for complete instructions, requirements, and submission guidelines. The work will be performed across multiple water pollution control facilities within Connecticut, with Todd Matthewson, WPC Superintendent, serving as the primary point of contact via phone or email. The solicitation is posted for informational purposes only on the CTSource portal, and all formal procedures must be followed as outlined in the official RFP materials.

POSTED

DEADLINE

YELL PURCHASE CATERPILLAR ENGINE PARTS

Solicitation # 140P1526Q0121

Yellowstone National Park is seeking Caterpillar-branded engine parts for a snow plow under solicitation number 140P1526Q0121, with a strict requirement for genuine Caterpillar replacement components as justified in the attached documentation. This procurement is exclusively set aside for small businesses, with no participation allowed from other business categories, and is classified under NAICS code 811310. All quotes must be submitted electronically to lindsay_mclaughlin@ios.doi.gov by September 2, 2026, at 6:00 p.m. Mountain Time, following the detailed specifications and pricing schedules provided. Questions about the solicitation must be submitted electronically no later than August 17, 2026, at 12:00 p.m. Mountain Time, and any official responses will be issued as amendments to the solicitation. The contract is managed by the Department of the Interior through the Arizona office in Flagstaff, with performance expected at Yellowstone National Park, Wyoming. Point of contact for all inquiries is Lindsay McLaughlin, reachable via email or phone number provided.

POSTED

DEADLINE

Semi-Annual Walk-in Cooler Service in Parlier, California

Solicitation # 1232SA26Q1145

This solicitation, numbered 1232SA26Q1145, is a combined synopsis and solicitation for commercial items issued under FAR Part 12 to procure semi-annual maintenance and repair services for 33 walk-in coolers located at the USDA-ARS San Joaquin Valley Agricultural Sciences Center in Parlier, California. The contract is a total small business set-aside under NAICS code 811310, with a size standard of $12.5 million, and is open to all responsible small business sources. The work involves comprehensive HVAC maintenance, including inspection and cleaning of evaporator and condenser coils, refrigerant pressure and performance testing, system calibration, electrical component checks, compressor and defrost mode verification, door hardware inspection, fan blade cleaning, motor lubrication, and thorough cleanup after service. All equipment, materials, and supplies must be furnished by the contractor. The period of performance is one year, running from September 1, 2026, to August 31, 2027, with two semi-annual service visits scheduled during that timeframe. The acquisition is structured as a Firm-Fixed Price Purchase Order under a Lowest Price Technically Acceptable (LPTA) evaluation method, where technical acceptability and past performance are pass/fail gates, and award will be made to the lowest priced offer that meets all technical and performance requirements. An official site visit is mandatory and scheduled for August 6, 2026, at 9:00 AM local time at 9611 S. Riverbend Ave., Parlier, CA 93648, and will be the only opportunity for offerors to inspect the location. Quotations must include a detailed operational approach addressing each SOW requirement, pricing submitted as specified, and a signed copy returned to the issuing office. Submissions are due by 5:00 PM Central Daylight Time on August 14, 2026, with all questions due no later than August 7, 2026, directed to Kerrie Hodges at kerrie.hodges@usda.gov, and must include the solicitation number in the subject line. Offerors must hold firm pricing for 90 days after the submission deadline. The contractor must comply with multiple Federal Acquisition Regulation clauses, including 52.212-4 (Terms and Conditions for Commercial Services), 52.20

POSTED

DEADLINE

Supply, Install, and Maintain a New Mailing Machine

Solicitation # RFQ50931

The Municipality of East Hants is seeking a vendor to supply, install, and maintain a new mailing machine to replace an aging unit that is no longer serviceable. The requirement includes not only the acquisition and installation of the equipment but also ongoing maintenance services as outlined in the Statement of Requirements, with the goal of ensuring reliable and efficient mail processing operations. Interested parties must submit competitive quotations by the deadline of August 18, 2026, using the official Nova Scotia Procurement Portal, as updates or amendments to the tender may not be reflected on CanadaBuys. The solicitation number is RFQ50931, posted on August 4, 2026, and all inquiries and submissions should be directed to the Contracting Authority, Mike Hatfield, at procurement@easthants.ca. There is no cost to access the tender documents, though third-party platform registration or fees may be required to view or respond to the request. The contract duration and specific terms are detailed in the full tender documentation, and no set-aside provisions apply.

Municipality of the District of East Hants

POSTED

DEADLINE

Maintenance and Repairs for Cooling and Refrigeration Equipment at WMCI

Solicitation # 0032-N

Bidders must submit all questions regarding the Maintenance and Repairs for Cooling and Refrigeration Equipment at WMCI solicitation through the Public Purchase system by 2:00 p.m. Mountain Time on August 14, 2026; late questions will not be considered. All responses to the solicitation must be fully uploaded via the Public Purchase online system no later than 2:00:00 p.m. MT on August 21, 2026, and failure to complete the upload by this deadline will result in the submission being locked, deemed non-responsive, and excluded from evaluation. It is the sole responsibility of each bidder to regularly monitor the Public Purchase portal for responses to inquiries, addenda, award notices, or any other updates related to this solicitation, as the Wyoming Procurement Office will not communicate this information via email, phone, fax, or mail. All documents must be submitted in PDF, Excel, or Microsoft Office format. The solicitation is issued by the State of Wyoming through its General Services Division for services to be performed within Wyoming. Interested parties can register for free on Public Purchase using the step-by-step guide available at https://ai.wyo.gov/divisions/general-services/purchasing. Primary point of contact for inquiries is Brenda Crozier, reachable at (307) 777-6708 or brenda.crozier@wyo.gov.

State of Wyoming

POSTED

1 day ago

DEADLINE

in 17 days

AI Contract Overview

The contract requires immediate response to unscheduled boiler failures across all Clark County facilities, with services including comprehensive diagnostics, emergency repairs, component replacement, and full system restarts to restore heating functionality as quickly as possible. Work must be performed on an on-call basis, prioritizing urgent needs that impact facility operations, safety, or comfort, with contractors expected to maintain rapid availability and responsiveness outside standard business hours. The solicitation is classified as a subcontract under NAICS code 811310, which pertains to commercial and industrial machinery and equipment repair and maintenance, and it is posted on the Nevada Government Marketplace with a response deadline of August 3, 2026. While no specific set-aside provisions or point of contact information is provided, performance is expected to be countywide within Clark County, and contractors must be prepared to meet aggressive response timelines to minimize downtime in critical public and municipal buildings.

General Info

Immediate emergency boiler repair and maintenance required 24/7 across Clark County facilities.

Agency

Nevada Government MarketplaceView Agency

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and MaintenanceView NAICS

Place of Performance

NV, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedJul 14

subcontract

Response DeadlineAug 3

Deadline has passed

Submission Closed

08/03/2026, 11:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyNevada Government Marketplace

ContactsNo contacts available

OfficeN/A

Organization / Agency

Nevada Government Marketplace

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Respond to unscheduled boiler failures with diagnostics, repairs, component replacement, and system restarts across Clark County facilities requiring urgent service.