Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Waste Packaging & Labeling Compliance Services

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract awards specialized services for the proper packaging, labeling, and documentation of waste materials in full compliance with military standards such as MIL-STD-129 and Department of Transportation regulations under 49 CFR. The work ensures that all hazardous and non-hazardous waste generated under Department of Defense operations is managed with strict adherence to federal and military protocols for transportation, storage, and recordkeeping. This subcontract falls under NAICS code 562998 for other waste management services and is administered by the Defense Logistics Agency to support environmental and safety requirements across military supply chains. Performance of the contract is expected to occur wherever DLA operations necessitate waste handling, with no specific geographic restriction outlined. The contract was posted in July 2026 and is intended to maintain operational readiness through consistent regulatory compliance and safe waste disposal practices.

General Info

Packaging, labeling, and documenting military waste per MIL-STD-129 and 49 CFR under DLA oversight.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

562998 - All Other Miscellaneous Waste Management ServicesView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SP450026F6422.

The full solicitation package (4 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

NR04C4

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 14

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Proper packaging, labeling, and documentation of waste materials per military (MIL-STD-129) and DOT (49 CFR) standards.

Similar Contracts

Same NAICS industry code

J--Replace Fire System Piping, Lava Beds Nat'l Monumt

Solicitation # 140P8426Q0013

Solicitation 140P8426Q0013 is a request for quotations from the National Park Service for the removal of approximately 185 linear feet of black iron fire suppression piping and its replacement with a new CPVC fire sprinkler system at the Lava Beds National Monument Research Center Building. The scope of work includes the installation of a 1-inch riser, 13 sprinkler heads, a 1-gallon expansion tank, and a 1-inch double check backflow preventer, as well as the addition of antifreeze to meet NFPA freeze protection requirements. The selected contractor is responsible for all supervision, labor, equipment, and supplies necessary for testing, flushing, certification, and cleanup. This project is a 100 percent small business set-aside under NAICS code 562998, resulting in a firm fixed price contract. The government anticipates a performance period of 30 days, starting November 9, 2026, and concluding by December 11, 2026. While the government seeks offers below 25,000 dollars, this figure is not a strict ceiling. Evaluation of quotes will consider past performance and responsibility. All work must comply with the Department of Labor prevailing wage rates for Siskiyou County, California. Responses are due by September 16, 2026.

Pwr Pore Mabo (84000)

POSTED

about 24 hours ago

DEADLINE

CT X-Ray Machine Removal and Disposal Services

Solicitation # 70US0926Q70092813

U S Secret Service

POSTED

about 24 hours ago

DEADLINE

Portable Sanitation Servicing and Waste Management

FA4819 325 Cons Pkp

POSTED

DEADLINE

Trash and Garbage Removal Services

Solicitation # 19KS7026Q0043

Solicitation 19KS7026Q0043 is a firm fixed price request for quotations for trash and garbage removal and disposal services at the U.S. Embassy Seoul, Korea. The scope of work includes providing all labor, equipment, and materials to perform pickups at the Chancery Compound, Chancery Cafeteria, Chief Mission Residence, Embassy Annex Compound, and Marine Security Guard Quarters. Specific requirements include the provision of various sized containers and the disposal of food waste and general refuse, though hazardous and regulated wastes are explicitly excluded. The performance period consists of a 12-month base year starting July 1, 2027, with four one-year renewal options extending through June 30, 2032. The government will award the contract to the lowest priced, technically acceptable offeror. Technical evaluation includes a review of past performance, experience, and the submission of a Contractor Quality Control Plan. Offerors must be registered in the System for Award Management, provide a completed IRS Form W-14, and demonstrate an established business presence in the Republic of Korea. Key requirements include the assignment of a Project Manager, strict security vetting for all personnel, and adherence to U.S. Army Safety Manual 385-1-1. Electronic quotations are due by October 12, 2026, and must include a technical offer, a price offer via SF-1449, and required representations and certifications.

US Embassy Seoul

POSTED

DEADLINE

H--Inspect & Clean Water Tanks, Crater Lake N.P.

Solicitation # 140P8426Q0076

The National Park Service is soliciting quotes for the cleaning and inspection of four potable water tanks at Crater Lake National Park, including one 150,000 gallon tank at Park Headquarters, two 100,000 gallon tanks at Mazama, and one 185,000 gallon tank at the Garfield Reservoir. The scope of work involves removing sediment, cleaning walls and floors, performing material deterioration analysis, and conducting water quality testing for chlorine residual and turbidity to meet Oregon Department of Environmental Quality standards. The project is a total small business set-aside under NAICS code 562998. All dive team members must possess ANSI/ACDE 01-1993 minimum commercial diver training with at least 600 hours of certified experience. The period of performance is generally 45 days after award, with a flexible window from September 28, 2026, through July 31, 2027, to account for seasonal snowfall and potential winter shutdowns. Priority is placed on completing the Garfield tank first, as it is only accessible via hiking trail and requires specific equipment restrictions, such as mechanical toters no wider than 36 inches. All waste must be hauled to the Mazama dump station. Quotes are due by 4:00 PM PDT on September 16, 2026, and must include a lump-sum price, a detailed labor and equipment breakdown, a proposed project schedule, and past performance references from the last three years. Award will be based on the most advantageous offer, considering price, relevant experience, and schedule.

Pwr Pore Mabo (84000)

POSTED

DEADLINE

Grease Trap Pumping and Lime Treatment

USDA Forest Service

POSTED

DEADLINE

Debris Removal & Waste Management

W7NV Uspfo Activity Okang 138

POSTED

DEADLINE

Grease Tank Pumping

Solicitation # Solicitation12318726Q0210

Solicitation 12318726Q0210 is a request for quotations issued by the USDA Forest Service for grease trap pumping services at the Angell Job Corps Center Dining Hall in Yachats, Oregon. This combined synopsis and solicitation is prepared in accordance with FAR Part 12, and no separate written solicitation will be issued. This acquisition is a total small business set-aside under NAICS code 562998 for All Other Miscellaneous Waste Management Services, with a size standard of 16.5 million dollars. Interested responsible sources must submit their quotations by the deadline of September 21, 2026, at 3:00 PM.

USDA Forest Service

POSTED

DEADLINE

Biosolids Management Services

Solicitation # S-2026-741BD

OC San is soliciting bids for Biosolids Management Services under solicitation number S-2026-741BD to secure experienced contractors for the beneficial reuse of approximately 300 wet tons of biosolids per day. The scope of work includes the potential transportation and management of these materials through approved methods such as composting, land application, and other qualifying practices. The procurement is managed by the California agency in Fountain Valley, with Donald Herrera serving as the primary point of contact. Interested parties must submit their responses by the deadline of October 20, 2026.

POSTED

DEADLINE

in about 1 month

Specialized Sludge Removal

Health and Human Services Commission

POSTED

DEADLINE

Grease Trap Maintenance & Waste Removal

Health and Human Services Commission

POSTED

DEADLINE

Sludge Removal Services, Building, Including Grease Trap Cleaning

Solicitation # HHS0017428V3

The Texas Health and Human Services Commission is soliciting competitive bids for a contract to provide grease trap waste removal, sludge removal, repair services, and as-needed water removal at the Corpus Christi State Supported Living Center. This solicitation, identified by number HHS0017428V3, aims to establish a service agreement that will commence immediately upon the contract award. An optional on-site visit is scheduled for September 10, 2026, at the facility located in Corpus Christi, which allows potential bidders to walk through the site and review specific requirements, though attendance is not mandatory for qualification. Interested parties must adhere to a strict procurement timeline to be considered. The deadline for submitting questions or requests for clarification is September 15, 2026, at 5:00 PM, with official responses expected to be posted via addendum by September 18, 2026. All formal responses to this invitation for bids must be submitted no later than September 29, 2026, at 10:30 AM. Bidders planning to attend the optional site visit are required to notify the designated on-site contacts in advance.

Health and Human Services Commission

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Storage Battery Supplier (NSN 6140-01-624-9682)

Battery Manufacturing

POSTED

about 19 hours ago

DEADLINE

Military-Grade Packaging and Palletization Services

Packaging and Labeling Services

POSTED

about 19 hours ago

DEADLINE

Supply of Uninterruptible Power Supplies (UPS)

Motor and Generator Manufacturing

POSTED

about 19 hours ago

DEADLINE

MIL-SPEC Packaging and Hazardous Material Shipping

Freight Transportation Arrangement

POSTED

about 19 hours ago

DEADLINE

Supply of Battery Assembly (6140-01-664-6369)

Storage Battery Manufacturing

POSTED

about 19 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2418

Solicitation SPE7L7-26-Q-2418 is a firm-fixed-price request for quotations issued by the Defense Logistics Agency Land and Maritime for the procurement of sealed lead acid storage batteries, specifically NSN 6140-01-624-9682. The requirement consists of two line items totaling eight units, with two units for item 0001 and six units for item 0002. Approved sources include EnerSys Delaware Inc. (part numbers ODS-AGM6M or PC2250) and Stored Energy Products, Inc. (part number PC2250). This is a restricted source item requiring government engineering source approval and is designated as a critical application item. The batteries are classified as Type I (Code H) with a non-extendable shelf life of 12 months. Delivery is required within 60 days after receipt of the order, with shipping terms set as FOB Destination. The items are to be delivered to locations in Warrenton, Oregon, and Schofield Barracks, Hawaii. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements RP001. Due to the nature of the supplies, the contractor must adhere to hazardous material identification and shipping standards, including IP025 and FAR 52.223-3, and provide a Material Safety Data Sheet. Inspection and acceptance will occur at the destination, utilizing zero-based sampling plans per MIL-STD-1916 or ASQ H1331. Award will be based on cost alone for quotes that conform to all solicitation requirements.

Battery Manufacturing

POSTED

about 19 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2422

This contract is a firm fixed price solicitation from the Defense Logistics Agency for one maintenance-free sealed lead-acid type I storage battery, part number APCRBC133 by Schneider Electric IT Corporation. The item has a non-extendable shelf life of 12 months and must be delivered within 60 days after order. Inspection and acceptance will occur at the origin, with shipping destined for the USS Harvey C Barnum Jr. The agreement mandates strict adherence to DLA packaging and marking standards, including MIL-STD-129 and MIL-STD-2073-1E. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans. Additionally, the contract includes hazardous material communications regarding mercury restrictions and specifies that the battery must meet nonspillable criteria under 49 CFR 173.159 to qualify for specific transportation exceptions across land, sea, and air.

Battery Manufacturing

POSTED

about 19 hours ago

DEADLINE

STRAINER, SEDIMENT

Solicitation # SPE7L7-26-Q-2420

POSTED

about 19 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2419

This contract is a solicitation for the procurement of five storage batteries, part number PS-12100 F1 from Power-Sonic Corporation, under NSN 6140-01-294-6528. The items are designated as critical application items and must feature F1 quick disconnect tabs. The contract is established as a firm fixed price agreement with a delivery requirement of 60 days after the order is placed. Each unit is destined for a specific naval vessel, including the USS Stout, USS Laboon, USS Barry, USS Russell, and USS John S McCain. The batteries are classified as Type I items with a non-extendable shelf life of 12 months. Strict adherence to hazardous materials packaging, marking, and shipping standards is required, specifically prohibiting the intentional addition of mercury except where functionally necessary. Quality assurance will be managed through zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331. All packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with inspection and acceptance occurring at the point of origin.

Battery Manufacturing

POSTED

about 19 hours ago

DEADLINE

Solicitation # SPE8E6-26-T-4407

Solicitation SPE8E6-26-T-4407 is a fixed-price request for quotations issued by DLA Troop Support for the procurement of four decals, identified by NSN 7690-01-262-9486 and Boeing part number BACM9L10AVM. This is a Foreign Military Sales requirement for Greece, with delivery required within five days after receipt of order. The items are designated as Type I (Code M) with a non-extendable shelf life of 24 months. Inspection and acceptance will occur at the point of origin, and the final delivery destination is Mechanicsburg, Pennsylvania. The contract mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, including required shelf-life labels. Palletization must comply with RP001, and the use of plastics for wrapping or cushioning should be avoided where possible. Technical and quality requirements are governed by the DLA Master List, including provisions for the removal of government identification from non-accepted supplies and the safeguarding of covered defense information. All quotes must be submitted via the DIBBS portal, and the government will not evaluate offers utilizing additive manufacturing unless specifically authorized.

Commercial Printing (except Screen and Books)

POSTED

about 19 hours ago

DEADLINE

BATTERY ASSEMBLY

Solicitation # SPE7L7-26-Q-2417

The Defense Logistics Agency Land and Maritime is soliciting quotations for the procurement of two battery assemblies, identified by NSN 6140-01-664-6369, under solicitation SPE7L7-26-Q-2417. The required delivery timeframe is 60 days after receipt of order, with the place of performance located at FPO 09592. Award will be determined based on the best value to the government, evaluating technical acceptability, price, and past performance regarding offered delivery. This contract carries stringent security and regulatory requirements, including CMMC Level 2 certification and compliance with DFARS 252.204-7012 for safeguarding covered defense information. Technical data is subject to ITAR and EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification and completed specific DLA export-control training. Additionally, the items are classified as hazardous materials, requiring the submission of Material Safety Data Sheets and certification via HAZDEC forms in accordance with FED STD 313D. Packaging and marking must adhere to MIL-STD-2073-1E Level B (Pack Code Q) and MIL-STD-129. Inspection and acceptance will occur at the origin, with DCMA inspection limited to kind, count, and condition. Invoicing and payment processing must be conducted electronically through the Wide Area WorkFlow system.

Battery Manufacturing

POSTED

about 19 hours ago

DEADLINE

LIMITER, RADIO FREQU

Solicitation # SPE4A7-26-Q-1069

The Defense Logistics Agency within the Department of Defense has issued solicitation SPE4A7-26-Q-1069 for the procurement of 49 radio frequency limiters. The items are identified by NSN/Part Number 1430-01-224-2273 and are associated with purchase request 7017409812. This federal solicitation was posted on September 11, 2026, with a response deadline of September 15, 2026. Interested parties should direct inquiries to the buyer via the DIBBS portal or the provided contact email.

Other Electronic Component Manufacturing

POSTED

about 19 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS