Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Sources Sought opportunity from Department Of Defense was posted on June 26, 2025. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Watervliet Arsenal (WVA) NY - Abrasive Blast Machine Rebuild

Closed
SS-AbrasiveBlastRebuildFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811310
New
Kubota M8200 Clutch Replacement
Solicitation # kubota-m8200-clutch-replacement
Management and Training Corporation is soliciting lump sum fee proposals for the clutch replacement of a Kubota M8200 tractor with front wheel assist, located at the Earle C. Clements Job Corps Center in Morganfield, Kentucky. The scope of work requires a qualified contractor to provide all transportation, labor, materials, and equipment to diagnose and repair the clutch assembly and power take-off system. Key technical requirements include replacing friction discs, bearings, oil seals, and O-rings, resurfacing the flywheel, and replacing hydraulic pipes and filters as needed. The contractor must perform all work according to manufacturer specifications and provide a final summary of diagnostic findings, an itemized list of replaced parts, and warranty documentation upon completion. This solicitation is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certified entities. Bids must be submitted via email to Angie Mahoney by 3:00 PM CST on November 3, 2026, and must include a bid sheet, proof of insurance, a completed supplier packet with a W-9, and applicable SBA certification letters. Award decisions will be based on best value, with a focus on administrative compliance and technical qualifications. The contract is subject to various Federal Acquisition Regulations, including standards for combating trafficking in persons, Buy American restrictions, and Service Contract Labor Standards per Wage Determination 2015-4687 Revision 31 for Kentucky.
Earle C. Clements Job Corps Center

POSTED

about 1 hour ago

DEADLINE

in 5 days
NAICS: 811310
New
SLED
SMDOT Elevator Maintenance
Solicitation # 12701633
The City of Santa Monica Department of Transportation (SMDOT) is soliciting bids for turnkey maintenance, inspection, and repair services for three hydraulic elevators located at 1620 6th Street. The equipment includes two passenger elevators and one freight elevator, specifically models AAK137, AA2986, and AEP227. The scope of work requires monthly systematic examination, lubrication, and repair of critical components, as well as monthly emergency recall and override testing in accordance with California Administrative Code Title 8, Section 3000(h). All provided materials must be new and meet Original Equipment Manufacturer standards. Bids must be submitted electronically via the OpenGov portal by December 3, 2026, at 3:00 pm. Qualified bidders must possess a valid C-11 California contractor's license and provide a maintenance supervisor to ensure compliance with safety requirements. The contract award is based on a weighted evaluation of experience and technical competence (25%), ability to meet work plans and timelines (25%), cost (20%), stability and references (10%), value add (10%), and quality control (10%). The City is not required to select the lowest monetary bidder. Key contractual requirements include a payment bond for awards exceeding 25,000 dollars, a Living Wage Certification for awards over 54,200 dollars, and compliance with the Oaks Initiative and ADA Title II. Successful bidders must provide a Certificate of Insurance naming the City of Santa Monica as an additional insured. Payment terms are net thirty days. The agreement includes an initial term with four subsequent annual renewal options.
D600 DEPT OF TRANSPORTATION - SaMoDOT

POSTED

about 15 hours ago

DEADLINE

in about 1 month
NAICS: 811310
New
SLED
CNG Fueling Station Maintenance and Repair Services
Solicitation # 2026-RFP-0441
The County of Sacramento is soliciting proposals under solicitation 2026-RFP-0441 to establish a contract for Compressed Natural Gas (CNG) fueling station preventative maintenance and repair services. The contract covers two facilities located at the Fleet Services Division and the Department of Airports. The selected contractor must provide certified CNG technicians to perform twice-monthly preventative maintenance and major services at 4,000 and 8,000-hour benchmarks. Service requirements include 24/7 availability, with on-site response times mandated within 48 hours for standard service calls and 24 hours for emergency calls. All work must adhere to manufacturer specifications and Cal/OSHA safety standards, including the provision of GHS Safety Data Sheets. The contract is designed for an initial one-year term with the option for four additional one-year extensions upon mutual agreement, with a scheduled award date of December 14, 2026. Award decisions will be based on factors other than price alone, utilizing a points-based scoring system that evaluates cost and the proposer's technical approach. Bidders must provide a Public Works and Prevailing Wage Contractor Registration number and are encouraged to utilize the County's Procurement Opportunities Program for small and micro-business preferences. Proposals must be submitted electronically via the SacCountyE bids portal by the final extended deadline of November 13, 2026.
DGS: CAPSD - Procurement

POSTED

about 16 hours ago

DEADLINE

in 15 days
NAICS: 811310
New
SLED
ELEVATOR & ESCALATOR MAINTENANCE, INSPECTIONS, AND TESTING
Solicitation # BPM059230
The Maryland Department of Transportation Maryland Transit Administration (MDOT MTA) is soliciting bids for a firm-fixed-price contract, AGY-26-001-MT, to provide comprehensive maintenance, inspection, and testing for elevators, escalators, and wheelchair lifts across various Metro stations in Maryland. The scope of work includes systematic preventive maintenance, emergency repairs, and deep cleaning to ensure all equipment remains in first-class operating condition in accordance with ASME A17.1 and A17.2 standards. The contract features a five-year base period with a total basis of award calculated at 4,750,000 dollars, which includes a 950,000 dollar allowance for reimbursable parts and materials. Bidders must maintain an operational office within 20 miles of Baltimore and provide certified mechanics with at least three years of documented experience. Award will be granted to the responsible bidder offering the lowest total price. Key procurement goals include a 17 percent Minority Business Enterprise (MBE) and a 1 percent Veteran-owned Small Business Enterprise (VSBE) participation rate. Bidders must possess at least three years of firm experience with comparable equipment and provide proof of significant insurance coverage, including 1 million dollars in general liability and 5 million dollars in pollution liability. Bids are due by November 12, 2026, and must include a bid bond, a contract affidavit, and detailed pricing for preventive maintenance and hourly labor rates. Performance is measured by the completion of specific checklist tasks rather than labor hours, and the contractor is required to submit safety reports within 24 hours of any incident.
Maryland Transit Administration

POSTED

about 17 hours ago

DEADLINE

in 14 days
NAICS: 811310
New
SLED
WOOHDR30R - Overhead Door Repairs and Maintenance - MDOT/SHA Worcester County
Solicitation # WOOHDR30R
Solicitation WOOHDR30R is an Invitation for Bids issued by the Maryland State Highway Administration for the preventative maintenance and repair of 27 overhead doors and their related operators at the Worcester County Shop locations in Snow Hill and Berlin. The scope of work requires semi-annual 20-point inspections and on-call repair services with a mandatory response time of four business days. All repairs must be performed by technicians with at least two years of experience, adhere to manufacturer specifications and building codes, and utilize new, first-quality parts. The contractor is required to provide a not-to-exceed cost quotation before performing any repair work and must submit detailed written reports following each service visit. The contract will be awarded to the responsive and responsible vendor offering the lowest total bid price. To qualify, bidders must demonstrate at least two years of continuous professional experience in overhead door services, be registered with the State Department of Assessments and Taxation, and possess their own employees, equipment, and vehicles without the use of subcontractors. Required submission documents include the eMMA Price Form, a Bid/Proposal Affidavit, and reference checks from the last five years. Payment is processed through the Snow Hill Shop, with specific billing requirements for trip charges, manlift usage, and materials priced at or below retail cost or MSRP. All work must comply with MOSH and OSHA safety regulations.
State Highway Administration

POSTED

about 18 hours ago

DEADLINE

in 20 days

AI Contract Overview

Show more

The U.S. Army Contracting Command at Watervliet Arsenal in New York has issued a sources sought notice to identify potential vendors capable of rebuilding a PANGBORN Abrasive Blast Machine. This is strictly a market research effort and no solicitation or contract award is in process at this time. The Army is seeking information from interested firms about their capabilities, specifically requesting completion of a questionnaire and submission of a company brochure and detailed capability statement describing relevant experience with similar equipment. All responses and submitted information should highlight the company’s qualifications and capabilities to perform the required rebuild. Responses must be sent by July 11, 2025, to the designated contract specialist, and proprietary information should be marked accordingly. Participation is voluntary and the Army will treat all submissions confidentially. No compensation or reimbursement will be provided for responding to this notice. The intent is to assess the market for vendors capable of meeting this potential future requirement; data submitted is for planning purposes only and will not be returned.

General Info

U.S. Army seeks vendors for PANGBORN Abrasive Blast Machine rebuild market research, responses due July 11.

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

Place of Performance

Watervliet, NY, 12189, USA

Set-Aside

NONE

Documents

2

Spec # 6-25-3426 Pangborn Abrasive Blaster Machine Rebuild

DOCX, High priority: read this firstspecifications
High

Market Survey Questionnaire - Rebuild of Abrasive Blast Machine

DOCX, Low prioritysources-sought
Low

AI Contract Breakdown

Uniform Contract Format
BSupplies or Services and Prices/Costs
CDescription/Specifications/Statement of Work
DPackaging and Marking
EInspection and Acceptance
GContract Administration Data
HSpecial Contract Requirements
IContract Clauses
JList of Attachments
MEvaluation Factors for Award

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseClosed
Posted

Sources Sought

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DEPT OF THE ARMY
Contacts1 person available
OfficeWATERVLIET, NY, 12189-4000, USA
Office AddressWATERVLIET, NY, 12189-4000, USA

Full Description

Show more

The U.S. Army Contracting Command – Watervliet Arsenal (ACC-WVA) Contracting Office located at Watervliet Arsenal, NY is conducting a market survey to identify potential capable sources for the rebuild of Rebuild of PANGBORN Abrasive Blast Machine.


THERE IS NO SOLICITATION AT THIS TIME AND NO CONTRACT WILL BE AWARDED FROM THIS NOTICE.


This is a request for information on capabilities and interest and does not constitute a Request for Quote (RFQ); submission of any information in response to this market survey is purely voluntary and the U.S. Government (USG) assumes no financial responsibility for any costs incurred. No funds have been authorized, appropriated, or received for this effort. Data submitted in response to this market survey will not be returned.


INFORMATION NEEDED:


Interested parties are encouraged to provide the following information:


Response to the attached Abrasive Blast Machine Questionnaire with general information about your firm and its capabilities (Available with the Sources Sought Synopsis).


INTERESTED PARTIES:


The Government requests interested parties to submit a response to the questionnaire and company brochure (if available) as well as a capability statement for this equipment that clearly details the ability to perform the aspects of this requirement. All proprietary information should be marked as such.

Responses will be reviewed by U.S. Army Contracting Command – Watervliet Arsenal (ACC-WVA), Watervliet Arsenal personnel only and will be held in a confidential manner. Any and all information provided shall include a description of the proposed manufacturing capabilities. Submitted documentation will not be returned.


Responses to this sources sought synopsis should be submitted by 11 July 2025 via email. Interested firms should provide the requested information and any pertinent information to the following:



David Deanda


Contract Specialist
Army Contracting Command – Watervliet Arsenal (ACC-WVA)
Email: contact@example.gov                  


Your input is voluntary and no compensation will be made for your participation in this survey. We appreciate your cooperation in answering these questions and thank you in advance for your participation.

More opportunities from Department Of Defense → DEPT OF THE ARMY

Same awarding agency

NAICS: 541715
Federal
Global Tactical Edge Acquisition Directorate Accelerated Capability Event 27-02- Spectrum Enabled Warfare
Solicitation # W912CM-25-GTEADACE27-02
The U.S. Army, through the Global Tactical Edge Acquisition Directorate and U.S. Army Europe and Africa in partnership with the FUZE xTech Program, is conducting Accelerated Capability Event 27-02 for Spectrum Enabled Warfare. This initiative seeks operationally mature electromagnetic spectrum operations capabilities at Technology Readiness Level 6 or higher to enhance the ability of U.S. and NATO forces to sense, exploit, and protect contested electromagnetic environments. The effort focuses on four primary capability areas: Electromagnetic Support and Tactical Surveillance, Autonomous Network Management, Electromagnetic Environment Visualization and Battle Damage Assessment Tools, and Electromagnetic Attack and Active Countermeasures. The acquisition process utilizes a competitive down-select mechanism starting with a concept white paper and video submission. Up to 15 finalists will be selected to participate in a live Soldier Exercise in Germany during early 2027, with up to five final winners chosen. Selected vendors receive prize funds from a 1.5 million dollar pool and are onboarded into the G-TEAD Library of Competed Capabilities, making them eligible for rapid follow-on contracts without further competition. Potential follow-on funding includes a 10 million dollar pool for Army SBIR Direct to Phase II awards for eligible small businesses in specific capability areas and a 6 million dollar pool for Prototype Other Transaction Agreements. Eligible participants include domestic and foreign for-profit and nonprofit organizations, provided they are not based in a Foreign Country of Concern. Technical solutions must adhere to open standards such as MOSA, SOSA, CMOSS, and CMFF, and demonstrate compatibility with the EFDI Data Backbone. The submission deadline for the initial concept white paper and video is October 30, 2026. Finalists and winners must possess a CAGE or NCAGE code to receive awards.
Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

14 days ago

DEADLINE

in 1 day
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS