WEBBING, TEXTILE
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
AI Contract Overview
Solicitation SPE1C1-27-Q-0185 is a fixed-price procurement issued by the DLA Troop Support Clothing and Textiles supply chain for textile webbing used in the manufacture of parachute equipment, tentage, and clothing. The primary requirement is for 30,000 yards of textile webbing (NSN 8305-00-782-3224) and 3,000 yards of a second webbing type (NSN 8305-01-655-7755). The primary item must be woven nylon in Olive Drab CARC (Chip 34088) and conform to PIA-W-4088G standards, featuring a flat twill design with a minimum breaking strength of 600 pounds and a width of 0.75 inches. Delivery is required within 120 days after order, with the FOB and inspection/acceptance points set to destination. The contractor is responsible for all inspection and testing, though the government reserves the right to perform its own verification. Quality assurance requires test reports and component certifications for all lots, unless the total award is under $100,000, in which case a Certificate of Conformance may suffice. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129R, with specific requirements for doublewall corrugated fiberboard containers and ISPM 15 compliant wood packaging. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and strict adherence to the Textile Fiber Products Identification Act for labeling each roll. This solicitation is not a small business set-aside and incorporates various FAR and DFARS clauses regarding cybersecurity, the Buy American program, and the prohibition of certain foreign commercial satellite services.
General Info
Place of Performance
2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USASet-Aside
Documents
1AI Contract Breakdown
Uniform Contract FormatSign up to view the full breakdown with detailed analysis of each section.
View Full BreakdownEverything you need to bid on this one
Open the full contract in your free workspace.
- 1 solicitation documentRead every page
- AI contract breakdown13 sections, Uniform Contract Format
- Buyer contactEmail and phone
Ask CLEATUS
I've read this contract. Ask me anything.
Timeline
Solicitation
The notice description changed.
Submission deadline
Response Deadline
Organization & Contact Information
Full Description
.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER)SET
FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEBAT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECTON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFPISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATECONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTEDSUPPLIES
INDIVIDUAL NSN DATA . NSN 8305-00-782-3224; PGC91158 . ITEM NAME: WEBBING, TEXTILE PART NUMBER: PIA-W-4088 CAGE CODE: 1HHQ4 . Shall be in accordance with (IAW) Parachute Industry Association PIA-W-4088G, WEBBING, TEXTILE, WOVEN NYLON dated 1 March2024. . The webbing is for use in the manufacturing of parachute equipment, tentage, clothing and other equipment. . EnvironmentalProtection: Abrasion Resistant Cloth Name: Twill Design Type: Flat Weight: 0.32 ounces per linear yard maximum Breaking strength:600 pounds minimum Fiber material: Nylon Color: Olive Drab CARC, Chip Number: 34088, IAW AMS-STD-595; replaces Olive Drab #7 andOlive Drab #107 according to Section 6.3 Standards of PIA-C-7219C & Section 6.3 Color standards of PIA-C-7020E. Roll length: 90 to110 yards Procurement Group Code (PGC): 91158 Thickness: 0.025 inches minimum to 0.035 inches maximum Width: 0.75 (3/4) inches ±0.03 (1/32) inches; 0.72 inches minimum to 0.78 inches maximum Type: IA Class: Not identified during provisioning of the NSN. Classreference. When procurement documents referencing this specification do not specify the class of webbing, any class in paragraph 1.2 of PIA-W-4088 may be used. See below descriptions of each class: Class 1 Shuttle loom, nylon 6,6 Class 1A Shuttleless loom,nylon 6,6 Class 2 Shuttle or shuttleless loom, nylon 6 or nylon 6,6 Departure from cited designator: As modified by EnvironmentalProtection . The unit of issue is a Yard (YD). . Each roll of the finished webbing shall be labeled or ticketed for fiber content in accordance with the Rules and Regulation Under the Textile Fiber Products Identification Act. . Each roll or spool of finishedwebbing shall be marked for identification in accordance with good commercial practice. A durable tag shall be attached to each roll or spool, which shall be clearly and legibly printed with water soluble ink with the following information:
- Stock number -Nomenclature
- Specification number
- Yardage
- Contract number and date of manufacture (month and year)
- Contractor's name
- Nameof contracting agency. . Each roll or spool of webbing shall be labeled or ticketed for fiber content in accordance with the Rulesand Regulations under the Textile Fiber Products Identification Act. . The textile manufacturer shall properly identify the age ofthe textile materials by placing a tag on the finished goods or label on the containers identifying the specification to which thematerial is manufactured, the lot number and the date of manufacture. The date of manufacture is defined as the date (month andyear) of the last manufacturing process that affects the
SPE1C1-27-Q-0185
SECTION B
SUPPLY/SERVICE: PGC: 91158 CONT'D
physical characteristics of the material. . TEST REPORTS AND COMPONENTCERTIFICATIONS IN ACCORDANCE WITH DLA TROOP SUPPORT CLOTHING & TEXTILES ADDITIONAL QUALITY ASSURANCE REQUIREMENTS, Revision 1 dated1 August 2021 (superseding DPSCM-4155.3 dated 3 November 1997) ARE REQUIRED WITH ALL CONTRACT COMPONENT LOTS. In lieu of theabovenamed requirement, if the total contract award does NOT exceed $100,000, the contract awardee may submit a Certificate ofConformance (CoC) per 3.1.3 of the DLA Troop Support Clothing and Textiles (C&T) Additional Quality Assurance Requirements (AQAR),Revision 1 dated August 2021. . SOURCES OF COMPONENT MATERIALS SHALL BE IDENTIFIED, INCLUDING APPLICABLE SPECIFICATIONS, AND SHALL NOT BE CHANGED THROUGHOUT THE LIFE OF THE CONTRACT WITHOUT REQUEST AND APPROVAL BY THE DLA TROOP SUPPORT CONTRACTING OFFICERTHROUGH MODIFICATION TO THE CONTRACT.
RESPONSIBILITY OF INSPECTION. THE CONTRACTOR IS RESPONSIBLE FOR THE PERFORMANCE OF ALLINSPECTION, EXAMINATION, AND TEST REQUIREMENTS SPECIFIED HEREIN AND IN THE SITED SPECIFICATIONS AND CONTRACT. THE GOVERNMENTRESERVES THE RIGHT TO PERFORM ANY OF THE INSPECTIONS, EXAMINATIONS AND TESTS AS DEEMED NECESSARY TO ENSURE SUPPLIES ANDSERVICES CONFORM TO PRESCRIBED REQUIREMENTS. . RT001: MEASURING AND TEST EQUIPMENT
. 52.246-15 CERTIFICATE OFCONFORMANCE
. GOVERNMENT LABORATORY TESTING OF COMPONENTS FOR ACCEPTANCE PURPOSE
FOR PHYSICAL (NON-SHADE) TESTING: Onlyapplicable if the total contract award exceeds $100,000
In lieu of the abovenamed requirement, if the total contract award doesNOT exceed $100,000, the contract awardee may submit a Certificate of Conformance (CoC) per 3.1.3 of the DLA Troop Support Clothingand Textiles (C&T) Additional Quality Assurance Requirements (AQAR), Revision 1 dated August 2021. . THE VENDOR SHALL NOTIFY THEDLA Product Test Center -Analytical FOURTEEN (14) CALENDAR DAYS TO THIRTY (30) CALENDAR DAYS IN ADVANCE OF WHEN LOTS ARE TO BEPRESENTED FOR SAMPLING AT THE ADDRESS BELOW.
THE CONTRACTOR'S APPROVED QUALIFIED LABORATORY WILL BE REQUIRED TO FORWARD A COMPLETED TEST REPORT FOR EACH LOT OF COMPONENTS TO THE ADDRESS BELOW. THE SUPPLIER'S SOURCE SAMPLING REPRESENTATIVE WILL PROVIDE THECOMPLETED DD FORM 1222 dated March 2021 TO THE LABORATORY TO BE SUBMITTED WITH THE COMPLETED TEST REPORT. TEST REPORTS SHALL NOT BEOLDER THAN NINETY (90) CALENDAR DAYS.
LOT NOTIFICATIONS AND SOURCE SAMPLING DD1222s/TEST REPORTS SHALL BE FORWARDEDTO: •••••@•••••.•••Sign up to see this detail
SAMPLES FOR PHYSICAL TESTING WILL ONLY BE FORWARDED UPON REQUEST TO: DLA Product Test Center -Analytical 700 Robbins Avenue, BLDG 5D Philadelphia, PA 19111 EMAIL: •••••@•••••.•••Sign up to see this detail
NOTE: PERMIT 45 CALENDAR DAYS . SHADE NSN/Part Number: 8305-00-782-3224 Quantity: 30,000 YD Purchase Request: 7016927502QTY: 30000 Delivery: 120 days ADO
Similar Contracts
Same NAICS industry code
More opportunities from Department Of Defense → C AND T SUPPLY CHAIN
Same awarding agency
Get AI-powered intelligence on this solicitation and the ones like it
Every solicitation package arrives shredded into a compliance breakdown and matched to your past performance, with incumbent history and alerts on amendments and award.
Join 750+ contractors already using CLEATUS
