This Government Contract opportunity from Department Of Defense was posted on September 17, 2019. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Welding Machine Repair-Intent to Award Sole Source

Awarded

M6700119Q1386Federal

Submission Closed09/17/2019, 12:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811310

New

SLED

Bus Fire Suppression System Maintenance

Solicitation # WMATA-0000010906

The Washington Metropolitan Area Transit Authority is seeking proposals for the maintenance of bus fire suppression systems under solicitation number WMATA-0000010906. This procurement falls under NAICS code 811310 and is managed by the agency's Virginia operations. The solicitation was posted on October 29, 2026, with a strict response deadline of November 4, 2026. Interested parties must submit their bids through the official supplier portal by the specified cutoff time to be considered for the contract.

Washington Metropolitan Area Transit Authority

POSTED

DEADLINE

Kubota M8200 Clutch Replacement

Solicitation # kubota-m8200-clutch-replacement

Management and Training Corporation is soliciting lump sum fee proposals for the clutch replacement of a Kubota M8200 tractor with front wheel assist, located at the Earle C. Clements Job Corps Center in Morganfield, Kentucky. The scope of work requires a qualified contractor to provide all transportation, labor, materials, and equipment to diagnose and repair the clutch assembly and power take-off system. Key technical requirements include replacing friction discs, bearings, oil seals, and O-rings, resurfacing the flywheel, and replacing hydraulic pipes and filters as needed. The contractor must perform all work according to manufacturer specifications and provide a final summary of diagnostic findings, an itemized list of replaced parts, and warranty documentation upon completion. This solicitation is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certified entities. Bids must be submitted via email to Angie Mahoney by 3:00 PM CST on November 3, 2026, and must include a bid sheet, proof of insurance, a completed supplier packet with a W-9, and applicable SBA certification letters. Award decisions will be based on best value, with a focus on administrative compliance and technical qualifications. The contract is subject to various Federal Acquisition Regulations, including standards for combating trafficking in persons, Buy American restrictions, and Service Contract Labor Standards per Wage Determination 2015-4687 Revision 31 for Kentucky.

Earle C. Clements Job Corps Center

POSTED

DEADLINE

Commercial Kitchen Equipment Repair ServicesThis subcontract for Commercial Kitchen Equipment Repair Services involves providing inspection, diagnosis, and repair of kitchen machinery for prime contractors working on Arizona Department of Corrections, Rehabilitation & Reentry facility projects. The selected provider is responsible for troubleshooting equipment according to industry standards and manufacturer specifications, supplying all required tools and diagnostic equipment, and ensuring all machinery is fully operational through a final visual walkthrough. Due to the nature of the work locations, personnel must obtain and maintain necessary security clearances to access secured prison perimeters. This opportunity is categorized under NAICS code 811310, with a response deadline of December 18, 2026.

Arizona Department of Corrections

POSTED

DEADLINE

Kitchen Equipment Parts and Repair Services

Solicitation # BPM007795

Solicitation BPM007795 is a Request for Proposal issued by the Arizona Department of Corrections, Rehabilitation & Reentry to secure qualified technicians for the inspection, diagnosis, and repair of kitchen equipment across various state facilities, including ADCRR, ADVS, and ASDB locations. The contractor must provide 24/7 availability for repair services and ensure all work complies with OSHA standards, manufacturer specifications, and applicable building and safety codes. Technicians are required to maintain professional standards, wear company-issued clothing, and obtain necessary security clearances to operate within secured perimeters, such as prisons. The award will be granted to the responsible offeror deemed most advantageous to the State, based on evaluation factors including experience and capacity, method of approach, and price. Deliveries are required within fourteen business days of an order and are priced as FOB Destination. Invoicing is handled through specific institutional accounting departments via email or physical mail, with payment options including purchasing cards and ACH transfers. The solicitation requires the submission of key personnel details, a method of approach, and proposed subcontractors through the State's eProcurement system by the December 18, 2026, deadline.

Arizona Department of Corrections

POSTED

DEADLINE

SMDOT Elevator Maintenance

Solicitation # 12701633

The City of Santa Monica Department of Transportation (SMDOT) is soliciting bids for turnkey maintenance, inspection, and repair services for three hydraulic elevators located at 1620 6th Street. The equipment includes two passenger elevators and one freight elevator, specifically models AAK137, AA2986, and AEP227. The scope of work requires monthly systematic examination, lubrication, and repair of critical components, as well as monthly emergency recall and override testing in accordance with California Administrative Code Title 8, Section 3000(h). All provided materials must be new and meet Original Equipment Manufacturer standards. Bids must be submitted electronically via the OpenGov portal by December 3, 2026, at 3:00 pm. Qualified bidders must possess a valid C-11 California contractor's license and provide a maintenance supervisor to ensure compliance with safety requirements. The contract award is based on a weighted evaluation of experience and technical competence (25%), ability to meet work plans and timelines (25%), cost (20%), stability and references (10%), value add (10%), and quality control (10%). The City is not required to select the lowest monetary bidder. Key contractual requirements include a payment bond for awards exceeding 25,000 dollars, a Living Wage Certification for awards over 54,200 dollars, and compliance with the Oaks Initiative and ADA Title II. Successful bidders must provide a Certificate of Insurance naming the City of Santa Monica as an additional insured. Payment terms are net thirty days. The agreement includes an initial term with four subsequent annual renewal options.

D600 DEPT OF TRANSPORTATION - SaMoDOT

POSTED

DEADLINE

CNG Fueling Station Maintenance and Repair Services

Solicitation # 2026-RFP-0441

The County of Sacramento is soliciting proposals under solicitation 2026-RFP-0441 to establish a contract for Compressed Natural Gas (CNG) fueling station preventative maintenance and repair services. The contract covers two facilities located at the Fleet Services Division and the Department of Airports. The selected contractor must provide certified CNG technicians to perform twice-monthly preventative maintenance and major services at 4,000 and 8,000-hour benchmarks. Service requirements include 24/7 availability, with on-site response times mandated within 48 hours for standard service calls and 24 hours for emergency calls. All work must adhere to manufacturer specifications and Cal/OSHA safety standards, including the provision of GHS Safety Data Sheets. The contract is designed for an initial one-year term with the option for four additional one-year extensions upon mutual agreement, with a scheduled award date of December 14, 2026. Award decisions will be based on factors other than price alone, utilizing a points-based scoring system that evaluates cost and the proposer's technical approach. Bidders must provide a Public Works and Prevailing Wage Contractor Registration number and are encouraged to utilize the County's Procurement Opportunities Program for small and micro-business preferences. Proposals must be submitted electronically via the SacCountyE bids portal by the final extended deadline of November 13, 2026.

DGS: CAPSD - Procurement

POSTED

DEADLINE

Vehicle Repair - Unit 2610 - Fleet

Solicitation # 321

Jefferson Parish Government is soliciting bids for the repair of a 2014 John Deere Tractor for its Department of Fleet Management. The scope of work includes diagnosing why the equipment fails to restart after running, replacing a non-operational fuel filter system, and draining, flushing, and refilling the fuel tank to remove debris contamination. The contractor is responsible for providing all necessary labor, materials, equipment, and transportation. The equipment is currently located at Sunshine Equipment in Covington, Louisiana. The contract will be awarded to the lowest responsive and responsible bidder. A critical requirement for the award is strict adherence to insurance standards per Jefferson Parish Resolution No. 136353 or No. 141125. Specifically, the contractor must maintain Garage Keeper’s Insurance of 500,000 dollars per occurrence, along with Commercial General Liability, Business Automobile Liability, and Worker’s Compensation coverage. The apparent low bidder must provide final insurance certificates within ten calendar days of the bid opening or face rejection. All costs, including incidentals, must be included in the total proposed bid amount.

Jefferson Parish Government

POSTED

DEADLINE

ELEVATOR & ESCALATOR MAINTENANCE, INSPECTIONS, AND TESTING

Solicitation # BPM059230

The Maryland Department of Transportation Maryland Transit Administration (MDOT MTA) is soliciting bids for a firm-fixed-price contract, AGY-26-001-MT, to provide comprehensive maintenance, inspection, and testing for elevators, escalators, and wheelchair lifts across various Metro stations in Maryland. The scope of work includes systematic preventive maintenance, emergency repairs, and deep cleaning to ensure all equipment remains in first-class operating condition in accordance with ASME A17.1 and A17.2 standards. The contract features a five-year base period with a total basis of award calculated at 4,750,000 dollars, which includes a 950,000 dollar allowance for reimbursable parts and materials. Bidders must maintain an operational office within 20 miles of Baltimore and provide certified mechanics with at least three years of documented experience. Award will be granted to the responsible bidder offering the lowest total price. Key procurement goals include a 17 percent Minority Business Enterprise (MBE) and a 1 percent Veteran-owned Small Business Enterprise (VSBE) participation rate. Bidders must possess at least three years of firm experience with comparable equipment and provide proof of significant insurance coverage, including 1 million dollars in general liability and 5 million dollars in pollution liability. Bids are due by November 12, 2026, and must include a bid bond, a contract affidavit, and detailed pricing for preventive maintenance and hourly labor rates. Performance is measured by the completion of specific checklist tasks rather than labor hours, and the contractor is required to submit safety reports within 24 hours of any incident.

Maryland Transit Administration

POSTED

DEADLINE

WOOHDR30R - Overhead Door Repairs and Maintenance - MDOT/SHA Worcester County

Solicitation # WOOHDR30R

Solicitation WOOHDR30R is an Invitation for Bids issued by the Maryland State Highway Administration for the preventative maintenance and repair of 27 overhead doors and their related operators at the Worcester County Shop locations in Snow Hill and Berlin. The scope of work requires semi-annual 20-point inspections and on-call repair services with a mandatory response time of four business days. All repairs must be performed by technicians with at least two years of experience, adhere to manufacturer specifications and building codes, and utilize new, first-quality parts. The contractor is required to provide a not-to-exceed cost quotation before performing any repair work and must submit detailed written reports following each service visit. The contract will be awarded to the responsive and responsible vendor offering the lowest total bid price. To qualify, bidders must demonstrate at least two years of continuous professional experience in overhead door services, be registered with the State Department of Assessments and Taxation, and possess their own employees, equipment, and vehicles without the use of subcontractors. Required submission documents include the eMMA Price Form, a Bid/Proposal Affidavit, and reference checks from the last five years. Payment is processed through the Snow Hill Shop, with specific billing requirements for trip charges, manlift usage, and materials priced at or below retail cost or MSRP. All work must comply with MOSH and OSHA safety regulations.

State Highway Administration

POSTED

DEADLINE

Semi-Annual Vacuum Cleaning and Maintenance ServicesThis subcontract for the California Department of Veterans Affairs involves providing specialized maintenance and repair services for upright and specialty commercial vacuums at CalVet facility projects in Los Angeles. The selected provider will be responsible for conducting semi-annual preventative maintenance and cleaning in accordance with manufacturer recommendations to ensure all equipment remains fully operational. Qualified technicians must perform the work while adhering strictly to CalVet safety and infection prevention requirements. Key deliverables include the maintenance of operational vacuum equipment and the submission of detailed service reports. The response deadline for this opportunity is November 17, 2026.

California Department of Veterans Affairs

POSTED

DEADLINE

Preventative Maintenance and Repair for Heavy Floor Care EquipmentThis subcontract involves providing routine preventative maintenance, inspections, and repairs for heavy floor care equipment, including commercial auto scrubbers and carpet extractors, at California Department of Veterans Affairs facilities in Los Angeles. The selected provider will be responsible for conducting quarterly services and responding to emergency repair requests within a strict two-hour window to ensure equipment remains operational. The contractor must utilize qualified technicians and strictly adhere to all CalVet safety and infection prevention protocols. Key deliverables include the maintenance of operational equipment and the submission of detailed service reports. This opportunity falls under NAICS code 811310, with a response deadline set for November 17, 2026.

California Department of Veterans Affairs

POSTED

DEADLINE

26WS0011-Floor Care Equipment Preventative Maintenance and Repair Services

Solicitation # 26WS0011

Solicitation 26WS0011 is issued by the California Department of Veterans Affairs (CalVet) for a contractor to provide comprehensive preventative maintenance, inspection, repair, and operational support for commercial floor care equipment in Los Angeles, California. The scope of work covers a fleet of carpet extractors, auto scrubbers, floor machines, and specialty vacuums. The contractor is responsible for providing all necessary labor, materials, and transportation, though consumable supplies like chemicals and batteries are excluded unless specifically authorized. Key performance standards include a two-hour onsite response for emergencies, a one-business-day response for non-emergencies, and a 100% completion rate for scheduled preventative maintenance. The contract will be awarded to the lowest responsible bidder, with a five percent preference given to certified Small or Micro businesses and a priority award to Disabled Veteran Business Enterprises (DVBE) in the event of a tie. Bidders must submit their proposals via email by November 16, 2026, including a completed Rate Sheet, Bidder Certification form, and a valid California business license. The contractor must maintain a Commercial General Liability insurance policy of at least $1,000,000 per occurrence and employ qualified technicians. Payment is processed through monthly invoices submitted to the CalVet Contract Manager, with a $10,000 withholding from the final payment for prime contractors until DVBE subcontracting reports are certified.

California Department of Veterans Affairs

POSTED

about 17 hours ago

DEADLINE

in 19 days

AI Contract Overview

This sole-source contract, solicitation number M6700119Q1386, was awarded on September 17, 2019, by the Department of Defense Commanding General for the calibration and repair of a specific welding system, serial number 1301, located at FRC East Cherry Point. The award was granted to Precision Welding Technologies, the Original Equipment Manufacturer, due to their possession of proprietary data rights and an urgent requirement to resolve a work stoppage impacting the T-64 engine program. The estimated cost for these services is 27,000.00 dollars, falling under NAICS code 811310. The work is to be performed in Havelock, North Carolina, with administrative oversight provided by the office located at Camp Lejeune. The procurement was conducted as a justification for other than full and open competition under FAR Part 13.

General Info

Agency

Department Of Defense → Commanding General

Contract Value

$19,782

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

Place of Performance

Marine Corps Air Station Cherry Point, HAVELOCK, NC, USA

Set-Aside

NONE

Awardee

PRECISION WELDING TECHNOLOGIES, INC.

Award Issued Date

09/17/2019, 12:00:00 AM UTC

Documents

Justification for Other than Full and Open Competition - Precision Welding Technologies

justification-and-authorization

Low

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseAwarded

PostedSep 10

special-notice

AwardedSep 17

Contract was awarded

Submission Closed

09/17/2019, 12:00:00 AM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → Commanding General

Contacts2 people available

OfficeCAMP LEJEUNE, NC, 28542-0004, USA

Organization / AgencyDepartment Of Defense → Commanding General

Office AddressCAMP LEJEUNE, NC, 28542-0004, USA

Contacts

Chris RabassiContract Specialist

contact@example.gov

+1 (555) 000-0000

Laurie LenserContracting Officer

contact@example.gov

+1 (555) 000-0000

Full Description

The Marine Corps Installation East (MCIEAST) Contracting Office, Camp Lejeune, NC hereby gives notice of their intent to award a purchase order to Precision Welding Technologies Inc, 6287 Viewbridge Dr., Auburn, CA 95602-7834, Cage Code 1FLJ5, on a sole source basis in accordance with the Federal Acquisition Regulation (FAR) Subpart 6.302-1, only one responsible source and no other supplies or services will satisfy agency requirements. Solicitation M67001-19-Q-1386. This requirement is for the troubleshooting and repair of the welding system manufactured Precision Welding Technologies Inc. manufactured in 2014, asset number 65923091048, serial number 1301, model number U6. This Notice of Intent is Not a Request for Competitive Quotes. A determination by the Government not to compete this proposed contract based upon responses to this notice is solely within the discretion of the Government. Information received will normally be considered solely for the purpose of determining whether to conduct a competitive procurement. Responses must be submitted within the closing date of the notice for consideration: TO BE RECEIVED NO LATER THAN 12:00 PM (EST) ON 13 SEPTEMBER 2019 IN ORDER TO BE CONSIDERED. Forward responses by email to contact@example.gov, or fax to +1 (555) 000-0000.

More opportunities from Department Of Defense → Commanding General

Same awarding agency

Welding Machine Repair-Intent to Award Sole Source

Contract Overview

Active Opportunities Like This One

AI Contract Overview

General Info

Documents

AI Contract Breakdown

Contract not broken down yet

Timeline

Find active opportunities like this

Organization & Contact Information

Full Description

More opportunities from Department Of Defense → Commanding General

Earlier notices in this NAICS code

Get AI-powered intelligence on the opportunities still open