Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Wire Rope Assembly Fabrication and Testing

Active

Federal

Response Deadline08/05/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract requires the fabrication of wire rope assemblies to meet the stringent specifications of MIL-DTL-83420/2, encompassing all phases of production including spooling, termination, and comprehensive load testing to ensure structural integrity and performance under operational conditions. The work must be performed to exacting military standards, with quality control measures fully aligned to verify compliance across every stage of assembly and testing. All delivered assemblies must be documented and traceable, with testing results validating that each unit meets required load thresholds and safety factors. Performance is designated for Tinker Air Force Base, Oklahoma, with a submission deadline of August 5, 2026, and the contract is classified as a subcontract under NAICS code 332420 for forged, pressed, and stamped metal product manufacturing. The issuing agency is the Department of Defense, specifically the ASC Supplier Oper AE and AF Division, indicating this effort supports defense logistics and equipment readiness. Bidders must be prepared to demonstrate capability in handling military-grade wire rope systems, adhere to all technical and procedural requirements outlined in the referenced specification, and deliver fully tested and certified assemblies to the specified location.

General Info

Fabricate MIL-DTL-83420/2 wire rope assemblies, load tested, traceable, delivered to Tinker AFB by August 5, 2026.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

332420 - Metal Tank (Heavy Gauge) ManufacturingView NAICS

Place of Performance

TINKER AFB, OK, 73145-8000, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 28

subcontract

Response DeadlineAug 5

Submission deadline

Response Deadline

08/05/2026, 05:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Production of wire rope assemblies including spooling, termination, load testing, and compliance with MIL-DTL-83420/2.

Similar Contracts

Same NAICS industry code

Pressure Vessel Tank

Solicitation # N0017326Q5833

The Naval Research Laboratory intends to award a sole source purchase order to AA TANKS, LLC of Warren, MI, for the procurement of a Pressure Vessel Tank under the Federal Supply Code 8120 and NAICS code 332420, with a size standard of 750 employees. This action is justified by the determination that only this single responsible source can meet the agency’s specific requirements, and no other supplies or services will suffice. The acquisition will be conducted using Simplified Acquisition Procedures under FAR Part 13.106-1(b) for an estimated value not to exceed $350,000.00. Interested parties may submit information demonstrating their capability and why competition would benefit the government, but responses will only be used to evaluate whether to proceed with a competitive process—the government retains full discretion to proceed noncompetitively. All submissions must reference solicitation number N0017326Q5833 and be received by August 3, 2026. No costs incurred in responding to this notice will be reimbursed, and no solicitation package is available. The point of contact for inquiries is Yina Brooks via email at yina.brooks.civ@us.navy.mil, and the transaction will be handled by the Department of Defense office located in Washington, DC.

Naval Research Laboratory

POSTED

about 21 hours ago

DEADLINE

Refrigerated Storage Container Supply and DeliveryThe Texas Department of Criminal Justice is seeking a subcontractor to supply and deliver a fully operational refrigerated storage container to its facility in Bridgeport, Texas. The contract requires the contractor to provide a unit that meets all specified technical and functional standards for refrigerated storage, ensuring it is ready for immediate use upon arrival. The scope may also include coordination with site personnel and verification that utilities and infrastructure at the location are prepared to support the container’s operation, though specific site readiness requirements are not detailed. The equipment must be delivered and installed in accordance with TDCJ standards and timelines. The solicitation is open to qualified subcontractors with experience in the manufacture or supply of refrigerated storage units, classified under NAICS code 332420 for refrigeration and HVAC equipment manufacturing. Responses must be submitted by August 11, 2026, and the contract will be awarded through the Texas SmartBuy portal. While no set-aside designation is specified, bidders are expected to demonstrate capability in handling secure, government-grade storage solutions and managing logistics for state facility deliveries. No point of contact information is provided, and all inquiries should be directed through the official portal link.

Texas Department of Criminal Justice

POSTED

DEADLINE

Solicitation # IW254756

The Texas Department of Criminal Justice is soliciting bids for the procurement of steam kettles under solicitation number IW254756, with the request posted on July 28, 2026, and responses due by August 12, 2026. This procurement is intended to support operational needs within Texas correctional facilities, with all delivered items required to be性能 at locations under the jurisdiction of the Texas Department of Criminal Justice. The contract is managed by Donna Gardner, who serves as the primary point of contact and can be reached via phone at 936-437-3859 or email at donna.gardner@tdcj.texas.gov. Bidders must submit proposals through the Texas SmartBuy portal, and no set-aside provisions have been designated for this solicitation. The department is seeking reliable, commercially available steam kettles suitable for institutional food service applications, though specific technical specifications are not detailed in the public posting. All interested vendors are expected to comply with general state procurement standards and deliver products that meet functional and safety requirements for use in correctional environments.

Texas Department of Criminal Justice

POSTED

DEADLINE

Precision Metal Fabrication of Connecting Link, RigThe contract requires the manufacture of 14 military-spec connecting links according to specified technical drawings, with all units subject to proof load testing to ensure structural integrity and compliance with defense standards. Each link must be marked with an individual item identification (IUID) to maintain traceability through the military supply chain. The work falls under NAICS code 332420, indicating precision metal fabrication, and is classified as a subcontract under the Department of Defense’s Land Supply Chain. Performance is to be conducted at a location in San Diego, California, with a zip code of 92136-3581. The solicitation was posted on July 28, 2026, and responses are due by August 10, 2026, providing a two-week window for qualified vendors to submit proposals. The contract does not specify a set-aside type or point of contact, but the reference to a DIBBS portal indicates it is posted through the Defense Logistics Agency’s procurement system for potential subcontractors to access.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Shipping and Storage Containers (Miscellaneous)The contract calls for the procurement and delivery of six military-spec shipping and storage containers that must fully comply with MIL-STD-2073-1E and MIL-STD-129 packaging standards, ensuring they meet rigorous Department of Defense requirements for durability, labeling, and environmental protection. These containers are intended for secure military logistics use and must be manufactured to withstand harsh conditions during transport and long-term storage while maintaining strict documentation and identification protocols dictated by the standards. The solicitation is issued under the NAICS code 332420, classifying it as a subcontract for fabricated metal product manufacturing, and is managed by the Department of Defense through the Construction & Equipment MRO SVC I organization. The place of performance is designated as New Cumberland, Pennsylvania, with a response deadline of August 10, 2026, and the opportunity was posted on July 28, 2026. All submissions must adhere to the technical specifications outlined in the referenced military standards, and the contractor is expected to deliver fully certified units with appropriate documentation to support compliance verification.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Wire Rope Assembly Manufacturing and DeliveryThe contract requires the manufacture, inspection, marking, packaging, and delivery of 100 single-leg wire rope assemblies identified by NSN 4010013122642, all of which must meet strict military specifications and support CSI traceability requirements to ensure full accountability and quality control throughout the supply chain. The work must be performed in accordance with applicable defense standards, with attention to precise fabrication, rigorous inspection protocols, and proper documentation to guarantee compliance and operational readiness. This subcontract, issued under NAICS code 332420, is managed by the ASC SUPPLIER OPER OEM DIVISION within the Department of Defense and has a performance location at Hill AFB with ZIP code 84056-5734. The solicitation was posted on July 28, 2026, and responses are due by August 5, 2026, providing a seven-day window for submission. All deliverables must be fully traceable and conform to the exact technical and logistical expectations outlined by the contracting authority, emphasizing reliability, durability, and adherence to documented military protocols.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Cradle Kit Manufacturing and SupplyThe contract pertains to the manufacture and supply of a military-spec cradle kit identified by NSN 8145015121025 and part number 150475, designed for shipping and support applications in defense logistics. The product must meet all applicable Department of Defense Logistics Agency standards, ensuring durability, compatibility, and compliance with military-grade requirements for transport and handling of sensitive equipment. The contract is structured as a subcontract under the NAICS code 332420, which classifies it within the forged and stamped metal product manufacturing sector, indicating that the cradle kit involves precision metal fabrication and assembly processes. The solicitation, posted on July 28, 2026, requires proposals to be submitted no later than August 10, 2026, and is managed by the Department of Defense through the Construction & Equipment Containers organization. The place of performance and point of contact details are unspecified, but performance is expected to align with DLA’s logistics framework. The contract will be administered via the DIBBS platform, and successful bidders must demonstrate capability to deliver fully compliant units on schedule, adhering to all technical and regulatory specifications without reliance on external documentation or citations.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

DEADLINE

Welding Electrode Manufacturing and SupplyThe contract requires the manufacture and supply of welding electrodes with a diameter of 3/32 inch and a length of 12 inches, manufactured to meet the specifications outlined in AWS A5.15-90. These electrodes must be packaged in 10-pound containers and fully compliant with Defense Logistics Agency preservation standards, ensuring long-term storage integrity and operational readiness. All materials must adhere to hazardous materials handling and transportation regulations, reflecting the stringent safety and compliance protocols mandated by the Department of Defense. The solicitation is issued as a subcontract under NAICS code 332420, indicating it is related to wire, pipe, and other metal product manufacturing. It was posted on July 28, 2026, with a response deadline of August 10, 2026, and the contracting authority is the Defense Logistics Agency. The performance location and point of contact details are not specified, but the work is intended to support defense-related operations governed by DLA standards. Interested parties must submit proposals through the official DIBBS portal before the deadline to be considered for award.

Defense Logistics Agency

POSTED

DEADLINE

Welding Electrode Manufacturing & SupplyThe contract requires the manufacture and supply of flux-coated welding electrodes measuring 0.125 inches in diameter by 14 inches in length, packaged in hermetically sealed 10-pound containers to ensure protection against moisture and environmental degradation. All products must meet the technical specifications outlined in AWS A5.15-90 and comply with established military packaging standards to ensure performance and longevity under demanding operational conditions. The electrodes are intended for use in critical defense applications where reliability and consistency are essential. The solicitation is issued as a subcontract under NAICS code 332420, which classifies the industry as Welding and Soldering Equipment Manufacturing, and is managed by the Department of Defense under its Packaging Requirements for Procurement Unit Container program. The opportunity was posted on July 28, 2026, with a mandatory response deadline of August 10, 2026. While specific performance locations and point of contact details are not provided, bidders are expected to adhere strictly to all packaging, labeling, and quality assurance requirements tied to defense procurement protocols. The full solicitation can be accessed through the DIBBS portal using the provided link.

DLA PACKAGING REQUIREMENTS FOR PROCUREMENT UNIT CONTAINER SHALL BE

POSTED

DEADLINE

Commercial Fire Extinguisher SupplyThe contract entails the procurement and supply of a military-specification fire extinguisher identified by NSN 4210015155560, ensuring full compliance with hazardous materials handling and packaging standards. This requirement is issued as a subcontract under the NAICS code 332420, which pertains to other fabricated metal product manufacturing, and is managed by the Defense Logistics Agency on behalf of the Department of Defense. The extinguisher must meet exacting military performance and safety criteria to support operational readiness in defense environments. The solicitation is open for responses until August 10, 2026, with performance to be conducted at Silverdale, Washington, ZIP code 98315-7000. The contract is not subject to any specific set-aside designation and is being issued through the DLA’s procurement system. Interested parties must ensure their submissions align with all technical, logistical, and regulatory requirements for military-grade fire suppression equipment, including appropriate documentation for hazardous material transport and storage. All communications and submissions should reference the RFQ through the provided DIBBS portal link.

Defense Logistics Agency

POSTED

DEADLINE

Scoop-Type Bucket Supply and DeliveryA military-spec scoop-type bucket is being solicited for supply and delivery to Fort Bliss, Texas, under a subcontract aligned with federal packaging, marking, and shipping standards. The requirement is classified under NAICS code 332420, indicating manufacturing of metal forgings and stampings, and is issued by the Department of Defense under the organization Construction & Equipment Manu & Con. All items must meet exacting military specifications and be delivered to the designated location with zip code 79918-0000. The solicitation was posted on July 28, 2026, and responses are due by August 10, 2026, with no set-aside provisions specified. The procurement is managed through the DIBBS system and requires full compliance with defense logistics standards without any identified point of contact information provided.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Supply of Wire Rope Terminal (NSN 4030-00-580-6779)The contract requires the manufacture or supply of four units of Wire Rope Terminal with Stud, identified by National Stock Number 4030-00-580-6779 and part number MS21260-7RH, fully compliant with applicable military standards including Qualification Product List and Qualified Manufacturer List requirements. This is a subcontract under the Department of Defense, specifically managed by the ASC Commodities Division, with performance expected at Huntsville, Alabama, 35824. The solicitation was posted on July 28, 2026, and responses must be submitted by August 5, 2026. The North American Industry Classification System code 332420 applies, indicating the work falls under forging and stamping. All deliveries must meet stringent military specifications to ensure compatibility and reliability in defense applications.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

ACCUMULATOR, HYDRAUL

Solicitation # SPE4A7-26-Q-0917

The contract pertains to the procurement of four hydraulic accumulators with NSN 1650-01-558-4800 under solicitation SPE4A7-26-Q-0917, with a response deadline of August 10, 2026, and a delivery requirement of 200 days after order. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for large acquisitions or the award date for simplified acquisitions. The item is subject to export control under ITAR or EAR, meaning any disclosure of technical data to foreign persons, including foreign nationals within the United States, requires prior authorization from the Department of State or Commerce, and DFARS 252.225-7048 applies. Access to such controlled data is restricted to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DLA training on handling export-controlled technical data and received formal approval from the DLA controlling authority. Cybersecurity compliance requires a CMMC Level 2 self-assessment, and government identification must be removed from any non-accepted supplies. The contracting activity is the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with Huy Nguyen as the primary point of contact.

POSTED

about 16 hours ago

DEADLINE

PANEL ASSEMBLY, ELEV

Solicitation # SPE4A7-26-Q-0883

The contract specifies the procurement of three PANEL ASSEMBLY, ELEV units under solicitation SPE4A7-26-Q-0883, with a delivery timeline of 210 days after contract award. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless superseded by an amendment. The contract incorporates multiple DLA-specific requirements including packaging standards, tailored quality controls, configuration change management, inspection at origin, removal of government identification from non-accepted items, and export control of technical data subject to ITAR or EAR regulations. Disclosure of controlled technical data to foreign persons, regardless of location or citizenship, is strictly prohibited without prior authorization, and only contractors with approved US/Canada Joint Certification Program status, completed DLA training, and formal approval may access such data. The item is identified by NSN 1560-00-766-6241, and contract administration is managed by the Department of Defense’s ASC Supplier Oper AE and AF Division, with April Reed designated as the primary point of contact.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 16 hours ago

DEADLINE

TAPE, INSULATION, ELECTR

Solicitation # SPE4A7-26-T-599V

This contract specifies the procurement of electrical insulation tape meeting MIL-I-19166C revision C dated 02/26/2021, identified by NSN 5970-00-612-8492 and sold in units of 1 RO equaling 108 feet. The item is classified as a commercial item and must be manufactured in compliance with qualified products list QPL-19166-30 revision 30. Strict packaging requirements under MIL-STD-2073-1E and MIL-STD-129 apply, including special marking code 33 for Type II shelf life identification. The tape has a maximum shelf life of five years when stored between 50°F and 80°F with humidity below 75%, but compliance with RS001 mandates a non-extendable 12-month shelf life from manufacture, regardless of storage conditions. The material is designated as hazardous with HMIC code P, necessitating submission of a complete Safety Data Sheet package including warning labels and the required transmittal form to dscrchempol@dla.mil. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero nonconformances permitted in the sample unless otherwise stated, and verification levels for attributes are prescribed. All deliveries must be shipped via traceable freight means, not parcel post, to specified military addresses in Virginia Beach, Oak Harbor, and Norfolk. The contract includes four separate CLINs totaling six ROs with delivery due between June and July 2026, all subject to origin inspection and acceptance with no quantity variance allowed. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and palletization must adhere to DLA packaging standards.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 16 hours ago

DEADLINE

MOUNT, RESILIENT, WEAPON

Solicitation # SPE4A7-26-T-599Z

This contract is for the procurement of 97 units of a resilient weapon system mount, identified by NSN 5342-01-159-6456 and part number 12293273-6, under solicitation SPE4A7-26-T-599Z. The item is classified as a critical application and Type I shelf-life item with a non-extendable shelf life of 60 months, requiring at least 85% of its shelf life to remain upon receipt by the first government activity. All packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including proper labeling per MIL-STD-129 with special marking code 32 for Type I shelf life. The product must be palletized and shipped FOB origin, with inspection and acceptance occurring at the point of manufacture. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and critical attributes must be verified at level VII with an AQL of 0.1. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with revisions effective as of the solicitation or award date depending on acquisition type. Delivery is due within 171 days of award, with an original required delivery date of April 21, 2027, and the item must be shipped to DDSP New Cumberland Facility in Pennsylvania. The unit price is $97.00 per each, totaling $9,409.00, and procurement is governed under NAICS code 332312 by the Department of Defense’s ASC Supplier Oper AE and AF Division.

Fabricated Structural Metal Manufacturing

POSTED

about 16 hours ago

DEADLINE

Solicitation # SPE4A7-26-T-600D

This contract specifies the procurement of a LATCH, VALVE with NSN 5342-01-193-7756 and part number S4127, for a quantity of 13 units, delivered FOB origin within 149 days of contract award, with no variance allowed in quantity. All items must comply with DLA packaging standards per MIL-STD-2073-1E and marking requirements under MIL-STD-129, including specific preservation methods, packaging materials, and unit container types. Mercury or mercury-containing compounds are strictly prohibited in the hardware, preservation, packaging, and marking unless explicitly exempted for functional components such as batteries, fluorescent lights, sensors, or weapons systems, and even then, portable devices must include shock-proof design and a secondary containment barrier per NAVSEA 5100-003D. Sampling and inspection follow MIL-STD-1916 or a comparable zero-defect sampling plan, with verification levels and AQLs assigned to critical, major, and minor attributes; unspecified attributes are treated as major. Acceptance occurs at the destination under inspection at the receiving warehouse, and non-conforming items must have government identification removed prior to return. The item must be palletized as directed by DLA packaging requirements, and shipping is directed to the DLA Distribution San Joaquin facility in Tracy, CA. The contract incorporates all referenced technical and quality requirements from the DLA Master List, with applicable revisions controlled by the solicitation issue date, and all compliance obligations are binding under the terms of SPE4A7-26-T-600D.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 16 hours ago

DEADLINE

Solicitation # SPE4A7-26-T-599W

The contract is for one head, piston, part number 41001708 with NSN 1650-01-046-2267, to be supplied by PTI Technologies Inc, CAGE 05228, under solicitation SPE4A7-26-T-599W, with a delivery requirement of 20 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. The supplier must comply with DLA packaging standards, CMMC Level 2 self-assessment, and tailored higher-level contract quality requirements applicable to both manufacturers and non-manufacturers. Inspection and acceptance must occur at origin, and non-accepted items must have all government identification removed. Physical marking of the bare item is required, and measuring and test equipment must meet specified standards. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required in the sample lot unless otherwise stated, and if applicable drawings or specifications define critical, major, or minor attributes, they must correspond to verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Unspecified attributes are treated as major. MIL-STD-105/ASQ Z1.4 may be used to determine sample size but not for acceptance criteria, which remains zero defects. The supplier must submit a source approval request with full documentation as required. The contract is issued by the Department of Defense through the ASC Supplier Oper AE and AF Division, and inquiries should be directed to Lawrence Rucker at the provided contact information.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 16 hours ago

DEADLINE

Solicitation # SPE4A7-26-T-600M

The contract pertains to the procurement of one cable hanger with NSN 5975-01-603-7325 and part number CMS151024, supplied by JONATHAN ENGINEERED SOLUTIONS CORP., under solicitation SPE4A7-26-T-600M. Delivery is required within five days at FOB origin, with no variance allowed in quantity, and acceptance occurs at the destination. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including specific preservation methods, material codes, and unit container specifications. Marking must adhere to MIL-STD-129 with no special marking code applied, and palletization must follow DLA standards. Mercury and mercury-containing compounds are strictly prohibited in the hardware, preservation, packaging, and marking processes, except for functional uses in specified items like batteries, fluorescent lamps, sensors, or naval instrument components, which must include a secondary containment barrier per NAVSEA 5100-003D. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and quality attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. The deliverable is to be shipped to the Portsmouth Naval Shipyard in Kittery, Maine, via the fastest traceable means, explicitly excluding parcel post. The government point of contact is Tasia Carney, and the required delivery date is September 26, 2025. Technical and quality requirements referenced in the DLA Master List, including RD003, RP001, RQ011, and RQ017, are incorporated by reference, governing material handling, identification, and non-accepted supply removal. All provisions align with DoD unit of issue standards and are to be interpreted per the version of the DLA Master List effective at the solicitation issuance date. The contract is classified with a NAICS code of 335932 under the Department of Defense, and government use codes indicate specific logistics and distribution identifiers for internal tracking.

Noncurrent-Carrying Wiring Device Manufacturing

POSTED

about 16 hours ago

DEADLINE

PLUG, MACHINE THREAD

Solicitation # SPE4A7-26-Q-0918

The contract specifies the procurement of four machine thread plugs identified by NSN 5365-01-441-1667, with a delivery requirement of 125 days after order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The contract includes stringent cybersecurity and export control obligations, requiring compliance with Cybersecurity Maturity Model Certification Level 2 and adherence to ITAR or EAR regulations for technical data, which prohibits unauthorized disclosure to foreign persons regardless of location. Only contractors with approved US/Canada Joint Certification Program status, completed DLA export control training, and formal authorization may access the controlled technical data. Additional provisions mandate specific packaging, inspection at origin, removal of government identification from non-accepted items, physical marking of bare items, and compliance with tailored quality requirements for manufacturers and non-manufacturers. The solicitation number is SPE4A7-26-Q-0918, issued on July 29, 2026, with responses due by August 5, 2026, under a federal procurement managed by the Department of Defense’s ASC Supplier Oper AE and AF Division, and the point of contact is Renee Bynum at renee.bynum@dla.mil.

Metal Crown, Closure, and Other Metal Stamping (except Automotive)

POSTED

about 16 hours ago

DEADLINE

Solicitation # SPE4A7-26-Q-0931

This contract pertains to the procurement of 45 units of a shim identified by NSN 5365-01-579-3967 under solicitation SPE4A7-26-Q-0931, with a responsive deadline of August 6, 2026, and a delivery requirement of 175 days after order. The technical and quality standards applicable to this item are defined by the DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger acquisitions, unless a subsequent amendment supersedes it. The contract mandates compliance with cybersecurity requirements through CMMC Level 2 certification by a Third-Party Assessment Organization and enforces DLA packaging standards. It includes tailored higher-level quality requirements for both manufacturers and non-manufacturers, with inspection and acceptance to occur at origin. Physical identification of the item must conform to specific marking standards, and any non-accepted supplies must have government identification removed. Export control is strictly enforced on associated technical data governed by ITAR or EAR, prohibiting disclosure to foreign persons without prior authorization from the Department of State or Commerce, and applies to foreign nationals regardless of location. Access to controlled data is restricted to contractors certified under the US/Canada Joint Certification Program, who have completed required DOD training and obtained DLA approval. The contract is administered by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with primary contact Renee Bynum at renee.bynum@dla.mil.

Metal Crown, Closure, and Other Metal Stamping (except Automotive)

POSTED

about 16 hours ago

DEADLINE

PANEL, STRUCTURAL, AI

Solicitation # SPE4A7-26-Q-0920

The contract is for one structural panel, item number 1560-01-196-4405, under solicitation SPE4A7-26-Q-0920, with a delivery deadline of 440 days after order. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions applicable based on the acquisition type and timeline—simplified acquisitions follow the revision in effect on the solicitation issue or award date, while large acquisitions use the revision active on the RFP issue date unless a later amendment supersedes it. The item is subject to multiple DLA-specific requirements including packaging, inspection and acceptance at origin, physical identification and marking of the bare item, measurement and test equipment standards, and configuration change management through engineering change proposals. Importantly, the item is exempt from item unique identification per service customer request, and government identification must be removed from non-accepted supplies. The technical data associated with this item is subject to export controls under ITAR or EAR, requiring explicit authorization for any disclosure to foreign persons, regardless of location, and only contractors with approved JCP certification, completed training, and DLA clearance may access such data. All applicable DFARS clauses, including those governing export control and contractor responsibilities, are in effect. The solicitation was posted on July 29, 2026, with a response deadline of August 5, 2026, and is managed by the Department of Defense’s ASC Supplier Oper AE and AF Division, with NyA Currie as the primary point of contact.

Fabricated Structural Metal Manufacturing

POSTED

about 16 hours ago

DEADLINE

HEAD, LINEAR ACTUATI

Solicitation # SPE4A7-26-T-600L

The contract covers the procurement of two units of a Head Linear Actuator with NSN 1650-01-110-0251 under solicitation SPE4A7-26-T-600L, issued by the Department of Defense through DLA. Delivery is required FOB origin within 67 days of contract award, with no variance allowed in quantity. Inspection and acceptance occur at the origin, and the item is classified as a critical application requiring strict compliance with DLA’s Master List of Technical and Quality Requirements, which override any other standards. Packaging must follow ASTM D3951 and MIL-STD-129, with palletization adhering to DLA’s RP001 packaging guidelines. Sampling procedures must conform to MIL-STD-1916 or ASQ H1331 Table 1, using zero-defect acceptance criteria unless otherwise specified, with critical attributes requiring an acceptance quality level of 0.1. The item is subject to tailored higher-level quality requirements and physical identification standards, though Item Unique Identification is not mandated. The delivery destination is Tracy, CA, with transportation governed by DLA procedural notes C19 and C20. The contract includes no set-asides and is assigned NAICS code 336413.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 16 hours ago

DEADLINE

RETAINER, HEATING UN

Solicitation # SPE4A7-26-T-600J

The contract pertains to the procurement of two retainers for a heating unit, identified by NSN 1450-01-361-2850, under solicitation SPE4A7-26-T-600J, with a delivery requirement of 20 days after award. The item is subject to strict export control regulations under either ITAR or EAR, meaning any technical data associated with it cannot be disclosed to foreign persons, including foreign nationals within the United States or overseas, without prior authorization from the Department of State or Department of Commerce. Distribution is restricted to contractors who hold an approved US/Canada Joint Certification Program certification, have completed mandatory DOD export control training, and have been formally authorized by the Defense Logistics Agency to handle such data, with DFARS 252.225-7048 governing compliance. The procurement is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with Lexus Henry as the primary point of contact, and bids must be submitted by August 6, 2026, under a federal procurement process with NAICS code 333924.

Industrial Truck, Tractor, Trailer, and Stacker Machinery Manufacturing

POSTED

about 16 hours ago

DEADLINE