Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Wizer Electric, LLC — NM - Region 3 - Plumbing

Awarded

NM-R3-PLUM-031325-WIZState & Local

Response Deadline04/14/2028, 12:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Contract NM-R3-PLUM-031325-WIZ is an Indefinite Delivery-Indefinite Quantity construction contract awarded by Sourcewell to Wizer Electric, LLC for plumbing services in Region 3 of New Mexico. Executed on April 14, 2025, the agreement establishes a one-year initial term with possibilities for extension. The contract is governed by Sourcewell's general terms and conditions and adheres to 2025 technical specifications for CSI Divisions 01 through 46. Performance is managed through a cooperative purchasing framework, allowing participating entities to access these services via purchase orders. The scope of work involves the furnishing, installation, and removal of plumbing materials and systems at various project sites, with final acceptance contingent upon destination inspections and written approval from the owner. Contractors must comply with rigorous technical standards, including NFPA and ASTM specifications, and adhere to a sustainability-focused evaluation framework that prioritizes Environmental Product Declarations and raw material sourcing. Administration is handled through electronic invoicing using AIA G702/G703 forms, while project-specific deliverables such as shop drawings and warranties are submitted via approved digital platforms.

General Info

Sourcewell awarded Wizer Electric an IDIQ contract for plumbing services in New Mexico.

Agency

Contract Value

$0

NAICS

238220 - Plumbing, Heating, and Air-Conditioning Contractors

Place of Performance

MN, USA

Set-Aside

NONE

Awardee

Wizer Electric, LLC

Award Issued Date

03/13/2025, 12:00:00 AM UTC

Documents

8

Comment and Review to RFP NM-031325 IDIQ Construction Contracts

comment-and-review

High

Indefinite Delivery Indefinite Quantity Technical Specifications CSI Divisions 01-46 2025

specifications

High

RFP #NM-031325 - IDIQ Construction Contracts in New Mexico

rfp

High

Sourcewell RFP #NM-031325 General Terms and Conditions

rfp

High

RFP #NM-031325 - IDIQ Construction Contracts (Proof of Publication)

special-notice

Low

RFP #NM-031325 Proposal Opening Record

opening-record

Low

Sourcewell Board Resolutions 2025_01 and 2025_19

other

Low

Sourcewell IDIQ Construction Contract – Plumbing

contract-document

Low

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseAwarded

PostedMar 13

Solicitation

AwardedMar 13

Contract was awarded

Response Deadline

04/14/2028, 12:00:00 AM UTCin over 1 year

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencySourcewell

Contacts5 people available

OfficeMN, USA

Organization / AgencySourcewell

Office AddressMN, USA

Contacts

Yei RogersPresident

contact@example.gov

+1 (555) 000-0000

Gabriel RodriguezSenior Estimator

contact@example.gov

+1 (555) 000-0000

Local Office

Jared WatsonSenior Supplier Development Executive

contact@example.gov

+1 (555) 000-0000

Tracy PlinskeSenior Supplier Development Specialist

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

NM - Region 3 - Plumbing

Similar Contracts

Same NAICS industry code

Water Pump Replacement

Solicitation # water-pump-replacement

The Cassadaga Job Corps Center in New York is soliciting bids for a water pump replacement project at their Pump House. The scope of work involves removing existing end suction centrifugal pumps and check valves to install a new booster pump system featuring two pumps with variable speed drives and automatic tower fill valves. Additionally, the contractor must provide a hydro pneumatic expansion tank, 3 inch Type L copper piping with sweat fittings, and fiberglass insulation on all piping, concluding with final testing and factory startup. This solicitation is set aside for small businesses, including certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone small businesses. Interested parties must submit their responses by November 30, 2026. The project falls under NAICS code 238220 and is managed by primary point of contact Derrick Dickerson.

Cassadaga Job Corps Center

POSTED

DEADLINE

in about 1 month

CBP#9772 HVAC Air Handling Unit (AHU) and Ductwork Cleaning Services

Solicitation # CBP#9772

Management & Training Corporation (MTC) is seeking bids for a fixed-price, single lump sum subcontracting opportunity to provide HVAC air handling unit (AHU) and ductwork cleaning services at the Edison Job Corps Center in Edison, New Jersey. The scope of work includes the thorough cleaning of 12 AHUs and 28 specified coils across the Kilmer and Edison dormitories, as well as the cleaning of associated supply, return, and outside-air ductwork. The contractor is responsible for installing and correcting access panels, performing filter replacements, and restoring all work areas to a safe condition. All work must be completed within 90 consecutive business days following a written Notice to Proceed. Award decisions will be based on overall best value, and bidders must complete a mandatory site visit and submit a bid bond guarantee of 20% for bids equal to or exceeding 25,000 dollars. Performance and payment bonds are also required for contracts of that value. The project is subject to various Federal Acquisition Regulation (FAR) clauses, including Buy American requirements, Service Contract Labor Standards, and strict security and privacy protocols. Final acceptance is contingent upon a substantial completion inspection, the resolution of a punch list, and the submission of a final project report containing pre-cleaning documentation and photographs. This opportunity is open to various SBA-certified small business categories, and awarded contractors must possess a Unique Entity Identifier (UEI).

Edison Job Corps

POSTED

DEADLINE

WOJC - Multi-Building Plumbing Leak Repair Project

Solicitation # WOJC – Multi-Building Plumbing Leak Repair Project

Education and Training Resources is seeking quotes for a fee-for-service subcontracting project to perform multi-building plumbing leak repairs at the Westover Job Corps Center in Chicopee, Massachusetts. The scope of work includes replacing leaking shower P-trap drain pipes in Rooms 123 and 213, repairing a cracked drain pipe in the pipe chase of Room 216, and replacing approximately ten linear feet of leaking heat pipe sections in both the Administration Building and King Hall. All work must conform to the Massachusetts State Plumbing Code, International Plumbing Code, and OSHA regulations, with a requirement that all materials be new and of commercial quality suitable for hydronic heating service. Interested bidders must submit a detailed cost breakdown, a proposed service schedule, and a bid sheet valid for at least 60 days by October 30, 2026. Mandatory requirements for submission include a current SAM.gov UEI number, active registration, Massachusetts licensing and credentials, a W-9, and certificates of insurance listing ETR as the certificate holder. Depending on the project value, payment and performance bonds may be required for contracts exceeding 35,000 dollars. Award selection is at the sole discretion of ETR and is not based solely on the lowest bid. The project is set aside for various small business categories and requires compliance with the Davis-Bacon Act, Service Contract Act, and the submission of weekly certified payroll reports.

Westover Job Corps Center

POSTED

DEADLINE

CBP6585 Bldg. 22 HVAC Replacement

Solicitation # CBP6585

Management & Training Corporation (MTC) is seeking bids for a fixed-price, single lump sum subcontract to replace the HVAC system in Building 22 at the San Diego Job Corps Center in Imperial Beach, California. The project, categorized under NAICS 238220, involves providing all labor, materials, and equipment to install a fully operational system, with an estimated price range between 0 and 25,000 dollars. Bids are due by 3:00 PM PST on October 28, 2026, and must be submitted via email to Tom Williams. A mandatory physical site visit and signature on the attendance roster are required prior to bid submission. Qualified bidders must provide a bid sheet with a detailed cost breakout, proof of insurance, three professional references, and a completed MTC Supplier Packet including a W-9 and self-certification. For bids equal to or greater than 25,000 dollars, a bid bond of 20 percent is required at submission, and performance and payment bonds of 100 percent of the contract price must be provided within five business days of an Intent to Award letter. The contract is subject to the Davis-Bacon Act, requiring compliance with prevailing wage rates and weekly certified payroll. Award decisions will be based on overall best value, and the successful contractor must provide two sets of operation and maintenance manuals and manufacturer warranties upon completion.

San Diego Job Corps Center

POSTED

DEADLINE

in about 2 hours

MJCC EXHAUST FANS BLD. 1429

Solicitation # mjcc-exhaust-fans-bld-1429

The Muhlenberg Job Corps Center, operated by Insights Training Group LLC, is soliciting fixed-price quotes from qualified HVAC and mechanical contractors to restore the exhaust fan and louver systems in Building 1429, located in Kentucky. The scope of work includes inspecting and repairing six specific exhaust fans, with requirements ranging from motor and selector switch replacements for fans 2 and 4, relocating a thermostat for fan 3, installing a new motor, blade, and guard for fan 5, verifying the operation of fan 6, and replacing a failed louver actuator for fan 7. All work must adhere to applicable building codes, manufacturer requirements, and general HVAC practices, with final acceptance contingent upon a substantial completion walk-through and the provision of all necessary operating manuals. This solicitation is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certified entities. Award will be granted to the responsible offeror who is technically acceptable and provides the lowest price. Contractors must be registered and licensed in the State of Kentucky and must comply with Davis-Bacon Act labor standards, including the submission of weekly certified payroll with every invoice. Additionally, prime contractors for projects exceeding 100,000 dollars must provide payment bonds per the Miller Act, and all contractors must provide proof of insurance and bonding capability. Quotes, including detailed labor and material cost breakdowns and a New Vendor Profile, are due by October 30, 2026.

Muhlenberg Job Corps Center / Insights Training Group LLC

POSTED

DEADLINE

Keystone Job Corps HVAC Units Maintenance

Solicitation # keystone-job-corps-hvac-units-maintenance

Keystone Job Corps is soliciting proposals for annual preventative maintenance on 46 HVAC units located in Pennsylvania. The scope of work includes the replacement of filters and belts, cleaning of all condenser coils, and operational verification of the equipment by service technicians. The units are distributed across several campus areas, including 32 units in the dorms, 4 in recreation, and 3 each in the dining hall, culinary, and academic buildings, with one unit located in the welcome center. This opportunity is set aside for small businesses under NAICS code 238220. Interested parties must submit their responses by October 30, 2026. The primary point of contact for this solicitation is Anthony Abreu.

Keystone Job Corps

POSTED

DEADLINE

ACT-0124-00 BNATCS: Installation of two (2) existing Chillers Bldg. 366 at the Willima J. Hughes Technical Center, Atlantic City, NJ

Solicitation # act-0124-00-bnatcs-installation-two-2-existing-chillers-bldg-366-willima-j-hughes-technical-center

This solicitation, managed by PTSI Managed Services Inc., involves the installation of two existing chillers at Building 366 of the William J. Hughes Technical Center in Atlantic City, New Jersey. The scope of work encompasses the installation of electrical power, control interface connections, and chilled water piping, as well as the final start-up of the equipment. The project is estimated to have a construction magnitude between 250,000 and 500,000 dollars. The opportunity is set aside for small businesses, including certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone small businesses. The primary NAICS code associated with the project is 238220, though 238210 and 238290 are also anticipated. Interested parties must submit their responses by the deadline of November 18, 2026.

PTSI Managed Services Inc.

POSTED

DEADLINE

Centennial Dry Sprinkler System & Compressor Replacement Services

Solicitation # centennial-dry-sprinkler-system-compressor-replacement-services

Management & Training Corporation is soliciting bids for a fixed-price, single lump sum contract to provide dry-type sprinkler system and compressor replacement services at the Centennial Job Corps Center in Nampa, Idaho. The project scope involves eliminating system leaks and replacing failing infrastructure in Building CM (Men's Dormitory), Building CW (Women's Dormitory), and Building D (Recreation) to prevent equipment wear from compressor short-cycling. Key deliverables include the demolition and removal of existing distribution piping and compressors, followed by the installation of new equipment and rigorous operational and leak testing. All work must adhere to NFPA 25 (2023 Edition) standards and original equipment manufacturer specifications. The performance period is 30 consecutive business days following a written Notice to Proceed. Bids are due by December 1, 2026, and must be based on an overall best value evaluation. A mandatory physical site visit is required prior to bid submission. For bids equal to or greater than $25,000, contractors must provide a bid bond guarantee of 20% of the base bid, as well as performance and payment bonds from an A-rated surety company. Required submission documents include a detailed cost breakout, proof of insurance, a Unique Entity ID, and a completed SF 1413 form. The contract is set aside for HUBZone, Woman-owned, and Service-Disabled Veteran-owned small businesses. Awardees must comply with Davis-Bacon Act prevailing wage rates for Idaho, submit weekly certified payroll reports, and adhere to FAR regulations regarding debarment disclosure for subcontracts exceeding $45,000.

Management & Training Corporation/Centennial Job Corps Center

POSTED

DEADLINE

in about 1 month

Dorm Hot Water Tank Replacement – Glenmont Job Corps Center – S26-006

Solicitation # S26-006

Adams and Associates, Inc. is seeking qualified mechanical and plumbing contractors for solicitation S26-006 to replace domestic hot water storage tanks and associated equipment at the Glenmont Job Corps Center in Glenmont, New York. This subcontracting opportunity involves the removal and disposal of four 505-gallon tanks and the installation of four new 500-gallon insulated storage tanks, four heat exchangers, and one bronze Bell and Gossett circulator pump in the North Dormitory. The scope of work includes all necessary piping modifications using ProPress materials, electrical disconnections and reconnections, insulation, rigging, and the provision of a temporary hot water heater to ensure the facility remains operational during the estimated construction period of two and a half to three weeks. Proposals are due by November 9, 2026, at 4:00 PM ET, following a pre-proposal site walkthrough on October 29, 2026. Award decisions will be based on a weighted evaluation of price (60%), quality (20%), past performance (10%), and schedule (10%), with the lowest price not guaranteeing selection. Selected contractors must comply with New York State statutory insurance requirements, Davis-Bacon prevailing wage determinations, and strict site security protocols, including a prohibition on fraternization with students. Required submission documents include a current W-9, vendor questionnaire with UEI and NAICS code, New York State licenses, and certificates of insurance. Payment terms are Net 30 days upon completion and receipt of invoice.

Adams and Associates, Inc.

POSTED

DEADLINE

MJCC HVAC BLD. 1403-04 B HALL

Solicitation # mjcc-hvac-bld-1403-04-b-hall

Insights Training Group, LLC is soliciting fixed-price quotes for an HVAC project at the Muhlenberg Job Corps Center in Kentucky, specifically for Building 1403-04 B Hall. The scope of work requires the contractor to furnish and install two 4-ton twinned split systems featuring 17 SEER minimum Trane condensing units, 95% AFUE high-efficiency gas furnaces, and matching indoor evaporator coils using R-454B refrigerant. Additional requirements include the installation of new refrigerant line sets, a Honeywell Pro 8000 programmable thermostat with a remote sensor, and necessary condensate drain piping and pumps. The project must be completed within 45 days of award, with all work adhering to manufacturer specifications, local codes, and OSHA and EPA regulations. This solicitation is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certified firms. To be considered technically acceptable, offerors must provide evidence of Kentucky state licensing and registration, a completed New Vendor Profile and W-9, a minimum 90-day bid guarantee, and proof of ability to secure performance and payment bonding. Award will be granted to the responsible offeror with a technically acceptable quote and the lowest price. The contract is subject to Davis-Bacon Act labor standards, requiring the submission of weekly certified payroll and a signed Statement of Compliance with every invoice. Quotes are due by October 30, 2026, at 5:00 pm via email to [email hidden].

Muhlenberg Job Corps Center / Insights Training Group LLC

POSTED

DEADLINE

Roswell JCC – Male Dormitory Bldg. Water Source Heat Pump Replacement (20 units)

Solicitation # roswell-jcc-male-dormitory-bldg-water-source-heat-pump-replacement-20-units

The Career Systems Development Corporation is soliciting proposals for the total replacement of twenty ceiling-mounted water source heat pumps at the Roswell Job Corps Center Male Dormitory Building 558 in New Mexico. The scope of work includes the removal and off-site disposal of twenty failed units and the installation of new Bosch 1-ton units or an approved equivalent. The installation must encompass all necessary ducting, electrical work, thermostat wiring, flexible hoses, and pressure valves. Additionally, the contractor must install smoke dampers with fusible links in all vents leading into the plenum and ensure all materials used in the plenum are plenum rated. All work must comply with NFPA 101, NFPA 70, and applicable plumbing, mechanical, and building codes. This project is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certified firms. It is subject to the Davis Bacon Act Wage Determination NM20260014, requiring the submission and approval of weekly certified payroll reports prior to invoice payment. Proposals exceeding 100,000 dollars will require 100 percent payment and performance bonding upon award. Submissions must include a safe work process, detailed costs for labor and materials, equipment cut sheets, warranty information, and a proposed payment schedule. The response deadline for this solicitation is November 7, 2026.

Career Systems Development Corporation

POSTED

DEADLINE

Exeter Job Corps Boiler Room Pump Replacement

Solicitation # exeter-job-corps-boiler-room-pump-replacement

The Exeter Job Corps is seeking a qualified contractor for the replacement of boiler room pump number two. The project requires the installation of a new TACO pump model TACF1511, along with the necessary new valves, fittings, gauges, and thermo-wells. Work will be performed in Rhode Island under NAICS code 238220. Eligible bidders must be licensed, insured, and possess an active UEI registration. This solicitation is set aside for small businesses, including certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone small businesses. Responses must be submitted by November 6, 2026.

Exeter Job Corps

POSTED

DEADLINE

More opportunities from Sourcewell

Same awarding agency

Post-Installation Maintenance & SupportThis subcontract opportunity with Sourcewell, identified under NAICS code 811212, focuses on providing post-installation maintenance and technical support for displays installed by prime contractors on master agreement projects. The selected provider will be responsible for ensuring operational uptime through ongoing repairs, the replacement of consumables and LED modules, and the delivery of comprehensive maintenance reports using specialized diagnostic tools. To be eligible for this contract, the service provider must hold status as a manufacturer-authorized service provider to perform necessary warranty services and technical repairs. Interested parties must submit their responses by the deadline of December 1, 2026.

Computer and Office Machine Repair and Maintenance

POSTED

DEADLINE

in about 1 month

Logistics & Specialized FreightThis subcontract for Logistics and Specialized Freight, managed by Sourcewell, involves the transportation and delivery of oversized electronic displays for prime contractors working on master agreement projects. The scope of work requires the use of flatbed trucks and cranes to ensure the safe handling and unloading of sensitive electronics. To qualify for this engagement, providers must maintain full DOT compliance and hold specialized handling certifications for fragile electronics. The primary objective is the secure delivery of equipment to the participating entity, with the response deadline for this opportunity set for December 1, 2026.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

in about 1 month

Systems Configuration & Software ImplementationThe Systems Configuration and Software Implementation subcontract through Sourcewell involves providing specialized technical services for prime contractors on master agreement projects. The scope of work includes the configuration of control software, server hardware, and network switches, as well as overall system integration and technical setup. The ultimate goal is the delivery of a fully configured and tested software control system tailored for display operations, complemented by comprehensive end-user training. To be eligible for this engagement, providers must hold specific software certification from the equipment manufacturer. This opportunity falls under NAICS code 541512 and was posted on October 13, 2026, with a response deadline set for December 1, 2026.

Computer Systems Design Services

POSTED

DEADLINE

in about 1 month

Electrical Integration & Power DistributionThe Electrical Integration and Power Distribution subcontract, issued by Sourcewell, involves providing specialized electrical wiring, power configuration, and grid integration services for prime contractors on master agreement projects. The scope of work includes the installation of electrical conduits, cabling, and power distribution units to ensure that display systems and boards are fully operational with reliable power supply and connectivity. To qualify for this contract, providers must employ a Licensed Master Electrician and ensure all work strictly adheres to the National Electrical Code. Interested parties must submit their responses by December 1, 2026, under NAICS code 238210.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

in about 1 month

Specialized Installation & Rigging ServicesThis subcontract for Specialized Installation and Rigging Services, issued by Sourcewell, involves the physical installation, setup, and mounting of heavy digital displays for prime contractors on master agreement projects. The scope of work includes mobilization, demobilization, and the physical mounting of systems in indoor arenas or outdoor stadiums. To ensure successful delivery, the contractor must utilize heavy lifting equipment, rigging gear, and structural supports while strictly adhering to local building codes and OSHA safety standards. The opportunity is categorized under NAICS code 238990 and was posted on October 13, 2026. Interested parties must submit their responses by the deadline of December 1, 2026. The final deliverable for this contract is the provision of fully installed and secured display systems.

All Other Specialty Trade Contractors

POSTED

DEADLINE

in about 1 month

Digital Display & Video Board ManufacturingThis subcontract agreement through Sourcewell focuses on the manufacturing and delivery of current-model digital displays, video boards, and scoreboards for prime contractors working on master agreement projects. The scope of work includes the production of essential hardware such as LED panels and video controllers, with a specific requirement for outdoor-rated weatherproofing to ensure durability. All equipment provided under this contract must adhere to industry standard regulatory codes and be backed by standard warranties. The successful provider is responsible for the physical delivery of the hardware to the participating entity. The solicitation period is open from October 13, 2026, with a response deadline of December 1, 2026.

Other Electronic Component Manufacturing

POSTED

DEADLINE

in about 1 month

Scoreboards, Digital Displays, and Video Boards with Related Services

Solicitation # 120126

Sourcewell, a Minnesota local government unit and service cooperative, is soliciting proposals under RFP 120126 for a master agreement to provide scoreboards, digital displays, and video boards with related services. This procurement solution is intended for use by thousands of participating entities, including governmental, nonprofit, tribal, and educational agencies across the United States and Canada. The scope of work focuses on turn-key solutions for indoor and outdoor applications, including athletic scoring systems, large-format LED displays, digital signage, and integrated audio and production systems. Related services such as design, installation, commissioning, and maintenance are also required, though the solicitation specifically excludes solutions that are exclusively focused on audio, software, or accessories. The resulting master agreement will have an initial term of four years, with the possibility of three one-year extensions and further extensions under exceptional circumstances. Awards will be granted to the highest-scoring proposers based on overall quality, product selection, and price, with an estimated annual transaction value of 80 million dollars. Proposals must be submitted in English via the Sourcewell Procurement Portal by December 1, 2026, at 3:30 p.m. Central Time. Sourcewell encourages participation from small, minority-owned, women-owned, and veteran-owned business enterprises. Proposers must remain valid for 150 days following the due date and must comply with all industry standards and regulations to avoid disqualification.

Irradiation Apparatus Manufacturing

POSTED

DEADLINE

in about 1 month

Automation, Telematics, and Software SupplyThis subcontract, titled Automation, Telematics, and Software Supply, involves the provision of specialized technology for monitoring and controlling recycling equipment. The scope of work focuses on supporting prime contractors who deliver material processing solutions to government, education, and nonprofit entities. Key deliverables include control systems, telematics, monitoring software, and various automation technologies such as sensors and hardware, culminating in the delivery of installed software and operational monitoring systems. Managed through Sourcewell under NAICS code 541511, the opportunity was posted on October 6, 2026, with a response deadline of November 24, 2026. The contract ensures that material processing solutions are equipped with the necessary digital infrastructure to maintain operational efficiency and oversight for public and nonprofit sector clients.

Custom Computer Programming Services

POSTED

DEADLINE

Equipment Installation and Technical ServicesThe Equipment Installation and Technical Services subcontract, issued by Sourcewell, focuses on the installation, commissioning, and ongoing maintenance of material processing equipment. The scope of work involves supporting prime contractors who provide solutions to government, nonprofit, and educational entities. Key technical responsibilities include the setup, configuration, integration, inspection, repair, and refurbishment of equipment, utilizing specialized industrial tools to ensure operational readiness and the delivery of detailed maintenance reports. This opportunity is categorized under NAICS code 811310 and was posted on October 6, 2026. Interested parties must submit their responses by the deadline of November 24, 2026. The contract emphasizes field service expertise to ensure that all commissioned equipment meets the necessary specifications for the end-user organizations.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

Construction and Demolition (C&D) Processing Equipment SupplyThis subcontract through Sourcewell focuses on the supply of heavy equipment designed to reduce and process construction and demolition debris. The scope of work involves providing operational machinery, specifically crushers, pulverizers, and breakers, to handle concrete and masonry debris. These material processing solutions are intended for prime contractors who serve government, education, and nonprofit entities. The opportunity was posted on October 6, 2026, with a response deadline of November 24, 2026. It is categorized under NAICS code 339999, reflecting the specialized nature of the processing equipment required for these large-scale debris management projects.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Compost and Mulch Processing Equipment SupplyThis subcontract through Sourcewell focuses on the supply of specialized equipment for processing compost and mulch. The scope of work involves providing operational machinery, specifically compost turners, windrow turners, and aeration equipment designed for organic waste. These supplies are intended for prime contractors who deliver material processing solutions to government, education, and nonprofit entities. The opportunity is categorized under NAICS code 339999 and was posted on October 6, 2026. Interested parties must submit their responses by the deadline of November 24, 2026.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Screening and Sizing Equipment SupplyThis subcontract, titled Screening and Sizing Equipment Supply, involves the provision of specialized equipment used for sorting and sizing recyclable or recoverable materials. The scope of work focuses on delivering operational screening solutions, including trommel, star, deck, vibrating, and disc screens, specifically designed for processing organic and construction waste. These supplies are intended for prime contractors who provide material processing solutions to government, education, and nonprofit entities. Managed by Sourcewell under NAICS code 339999, the opportunity was posted on October 6, 2026, with a response deadline of November 24, 2026. The contract ensures that the necessary hardware is available to facilitate efficient waste recovery and material processing across various public and non-profit sectors.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS