This Combined Synopsis/Solicitation opportunity from Department Of Defense was posted on June 8, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Wrapping Machines

Closed

W911S226U3388Federal

Submission Closed06/11/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333993

New

Federal

Vertrod Thermal Impulse Pneumatic Heat Sealer SupplierThis 8(a) sole source subcontract through the NASA Shared Services Center involves the procurement of two Vertrod 48 PS Thermal Impulse Pneumatic Pivot Style Heat Sealer Machines for prime contractors operating at the NASA-Stennis Space Center. The required equipment must feature 48 inch seal lengths in both 3/8 inch and 1/2 inch widths, single side heater bars, and pneumatic low pressure jaw close safety systems. To meet operational standards, all machines must be compatible with ISO7 clean room environments. The supplier is responsible for delivering two fully configured and tested units, which include a 3 year limited warranty. This procurement falls under NAICS code 333993 and was posted on October 28, 2026, with a response deadline of November 2, 2026.

NASA Shared Services Center

POSTED

DEADLINE

Sealing Machines for CHOP Shop

Solicitation # 80NSSC26948111Q

The NASA Shared Services Center is seeking to procure two Vertrod 48 PS Thermal Impulse Pneumatic Pivot Style Heat Sealer Machines for the Critical Hardware Operational Processing shop at the Stennis Space Center Test Complex. These machines will be used to create airtight and watertight seals for bags containing fittings, seals, o-rings, and crush washers, with operating temperatures ranging from 200 to 650 degrees Fahrenheit. One unit is designated for the general clean room area to replace a non-operational machine, and the second is for a newly constructed, positively pressurized ISO7 clean room. Technical requirements include a pneumatic low-pressure jaw close safety system and safety switch indication lights, and the equipment must come with a three-year limited warranty. This procurement is being conducted as a special notice under NAICS code 333993, with the government intending to issue a sole source contract to Government Affairs Institute, Inc. under the authority of FAR 12.102(a) and as an 8(a) sole source set-aside. While the government has identified a sole provider, it is requesting capability statements from interested organizations to determine if the procurement should be conducted on a competitive basis. Capability statements must be submitted to the primary point of contact, McKenzie Hanson, by 3:00 p.m. Central Standard Time on November 2, 2026. This effort follows the provisions and procedures prescribed in FAR Part 12 for commercial items.

NASA Shared Services Center

POSTED

DEADLINE

Supply of Filler Opening Cap (NSN 5340016340030)This subcontract involves the sourcing or manufacture of a Filler Opening Cap, identified by NSN 5340016340030, to support prime contractors delivering for the DLA Weapons Support Land Supply Chain under the Department of Defense. The selected provider must ensure the component complies with the DLA Master List of Technical and Quality Requirements and adheres to RP001 DLA Packaging Requirements for Procurement. The scope of work requires the delivery of one physical unit to a specified destination in Chambersburg, Pennsylvania. This opportunity falls under NAICS code 333993, with a response deadline set for November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Downhole Deployment Valve (DDV) Supply and InstallationThis subcontract involves the supply and installation of specialized Downhole Deployment Valves for prime contractors operating on Oil & Gas Development Company Limited projects in Pakistan. The scope of work includes deploying and setting valves at precise depths to isolate the wellbore or manage fluid flow during tool deployment, as well as the subsequent actuation and retrieval of these valves according to the established drilling program. To ensure operational safety and quality, all provided equipment must strictly adhere to API standards for downhole hardware. The primary objective of the contract is the delivery of fully installed and functional Downhole Deployment Valves. Interested parties must submit their responses by November 12, 2026.

Oil & Gas Development Company Limited (OGDCL)

POSTED

DEADLINE

Yellow Adhesive Supplier (NSN 8040-01-663-3917)This subcontract through the Defense Logistics Agency requires the supply of specialized yellow adhesive, identified by NSN 8040-01-663-3917, for prime contractors. The material must adhere to specifications for either Lockheed Martin P/N LMAML015F3/TU or 3M P/N 7000058946. Key requirements include a minimum extendable shelf life of 12 months and the provision of SDS and HCS labels in accordance with 29 CFR 1910.1200. The contract specifies the delivery of four 5.0-ounce units FOB Destination to Camp Lemonnier in Djibouti. All packaging must strictly comply with MIL-STD-2073-1E and MIL-STD-129 standards. This procurement falls under NAICS code 333993, with a response deadline set for November 2, 2026.

Defense Logistics Agency

POSTED

DEADLINE

Purchase of Cardboard Baler

Solicitation # F2027043

Tarrant County is soliciting bids for the replacement of a cardboard baler at the Tarrant County Recycling Center under solicitation number F2027043. The project requires the awarded vendor to provide all labor and materials for the uninstallation and removal of the existing equipment and the installation of a new open-end automatic shear baler. Technical requirements for the new unit include an auto-tie system, a wire run-out sensor, a minimum total press weight of 25,350 pounds, a nominal hopper size of 30 by 30 inches, and a bale size of 30 inches wide by 40 inches deep with variable length. Safety features such as hinged access doors with safety interlocks for both the bale chamber and feed hopper are mandatory. Bidders must submit a vendor quote form, product specification sheets, warranty information, and oil and electrical system requirements. The contract will be awarded to the lowest bidder who meets all technical specifications and bids on all required items. All delivery costs, including labor, travel, fuel, freight, and the removal of current equipment, must be included in the installation pricing. Bidders must adhere to Tarrant County's General and Special Terms and Conditions, which include mandatory criminal background checks for personnel accessing county facilities and strict data security protocols for any IT-related solutions. The county also emphasizes its Historically Underutilized Businesses policy, targeting a 20 percent good faith goal for HUB participation. Invoices must be submitted to the Tarrant County Auditor's Office and reference a purchase order number, with payment typically issued within 30 days of receipt.

POSTED

DEADLINE

Biopharmaceutical Automated Fill Machine Isolator

Solicitation # 134-202627-001

Wilson Community College is soliciting proposals for the design, fabrication, and installation of an Automated Fill Machine Isolator unit for the Biomanufacturing Education and Skills Training (BEST) Center of Eastern North Carolina. The system will be integrated into simulated cleanrooms to provide a capstone training experience for students, focusing on manual aseptic processing and operator skill development rather than high-throughput production. The project encompasses multiple phases, including engineering and design, fabrication, Factory Acceptance Testing, onsite installation, commissioning, and final acceptance. While full GMP validation is not required, the equipment must meet OSHA standards and carry appropriate safety certifications from organizations such as ASME, UL, NEMA, or the American Gas Association. The contract is expected to be completed within one year of the effective date, with onsite installation anticipated after August 11, 2027. Payment is structured around milestone deliverables, with final payment contingent upon written acceptance by the BEST Center following successful inspection and training. Vendors must provide a comprehensive technical proposal, pricing, and certifications of financial condition, along with at least three customer references. The state also maintains an option for a maintenance agreement featuring two preventive safety inspections per year. Proposals are due by November 10, 2026, and will be evaluated based on a narrative consensus of strengths and weaknesses.

Wilson Community College

POSTED

DEADLINE

5600 Combo L’ Sealer and Tunnel Combination Machine SupplierThis subcontract agreement involves the supply of one 5600 Combo Fully Automatic L Sealer and Tunnel Combination Machine intended for prime contractors working on State of Ohio Department of Administrative Services projects. The equipment package includes a machine with a 19 by 14 by 6 inch seal area, a precision temperature control tunnel, a 36F 3 ft Flighted Infeed Conveyor, and a Model 18-12SW Flexible Skate-wheel Conveyor. All provided machinery must exceed OSHA safety standards and be delivered as a fully functional unit accompanied by a spare parts kit. The procurement is managed by the Das105000 General Services Division Lzrs under NAICS code 333993. The solicitation was posted on October 16, 2026, with a response deadline set for November 2, 2026.

Das105000 General Services Division Lzrs

POSTED

DEADLINE

5600 Combo, Fully Automatic L’ Sealer and Tunnel Combination Machine

Solicitation # SRC0000042083

The State of Ohio Department of Administrative Services is soliciting quotes for one 5600 Combo Fully Automatic L Sealer and Tunnel Combination Machine for use in Copy Center production. The equipment must feature a production speed of up to 30 packages per minute, a maximum seal area of 19 inches long by 14 inches wide by 6 inches high, and a variable speed drive from 0 to 95 FPM. Technical specifications include a chamber size of 18 inches wide by 7 inches high by 38 inches long and a precision temperature controller ranging from 0 to 400 degrees. The procurement also includes a 36F 3 ft flighted infeed conveyor, a Model 18-12SW 18 inch wide flexible skate-wheel conveyor, and a spare parts kit. Due to a 51 inch width entry restriction at the print shop, the machine must be delivered in separate pieces and assembled on-site. The awarded supplier must provide itemized pricing for installation and training. Safety is a critical requirement, as the machine must exceed OSHA safety standards with a fully enclosed seal area and safety interlocks on all doors, as well as built-in self-diagnostics on the control panel. Selection will be based on the lowest responsive and responsible quote. All bidders must be fully registered as suppliers with the State of Ohio through OhioBuys, OhioPays, and the Ohio Secretary of State.

Das105000 General Services Division Lzrs

POSTED

DEADLINE

Solicitation # 967-0928-27

The County of Solano, through the Sheriff's Office - Office of Emergency Services, is soliciting bids under RFQ 967-0928-27 for the procurement and delivery of one fully assembled, operational sandbagging machine. This equipment is intended to enhance emergency preparedness and operational resilience during flood and storm events by enabling the rapid production of up to 1,200 sandbags per hour with a four-person crew. The machine must feature a heavy-duty welded steel frame with a minimum 10-gauge steel hopper, forklift pockets, and a digital control panel. Key technical requirements include adjustable fill weights from 1 to 5,000 pounds, compatibility with various bag materials and fill substances such as sand, gravel, and soil, and the integration of dual hopper agitators, an industrial sewing system, and a compatible generator for use in locations without utility power. The contract is governed by the laws of the State of California and requires delivery F.O.B. destination to Fairfield, California, with a target delivery date of November 15, 2026. Award will be granted to the lowest responsive and responsible bidder. Proposers must submit their bids electronically via the OpenGov portal by November 2, 2026, including a vendor application, a signed signature page, and proof of non-debarment via SAM.gov. The successful vendor must provide a minimum two-year or one-million-cycle manufacturer's warranty and maintain comprehensive general liability and workers' compensation insurance. Additionally, vendors must comply with Cal/OSHA requirements regarding hazardous materials and provide Material Safety Data Sheets if applicable.

Sheriff's Office - Office of Emergency Services

POSTED

DEADLINE

Solicitation # 2027-RFQ-00168

The California Human Resources Department in Redwood City is soliciting quotes under solicitation number 2027-RFQ-00168 for the purchase, installation, setup, and ongoing maintenance of a high-volume folder/inserter machine. The equipment must be capable of folding, inserting, and sealing various standard mail pieces, including multi-page documents and return envelopes, to ensure secure and efficient government mail operations. Vendors are required to provide detailed equipment specifications, capacity, software licensing, and compatibility details with existing workflows. The selection process will prioritize the best overall value, weighing cost against reliability, operational efficiency, and service support. Interested parties must submit their responses by the deadline of November 10, 2026. Primary coordination for this project is handled by Financial Management Analyst Carling Luk and Mail Services Supervisor Victor Morales.

Human Resources Department

POSTED

DEADLINE

Horizontal Overwrap Machine SupplierThis subcontract opportunity is for the procurement of one Horizontal Overwrap Machine intended for food packaging applications at the Fresno Unified School District Nutrition Services facility in Fresno, California. The selected supplier is responsible for the manufacturing or sourcing of the equipment and must manage all logistics related to shipping and delivery to ensure the machine is delivered fully operational. The project is governed by federal funding provisions, requiring strict compliance from the contractor. Interested parties must submit their responses by October 28, 2026, in accordance with the solicitation posted on October 7, 2026.

Fresno Unified School District

POSTED

21 days ago

DEADLINE

in about 3 hours

AI Contract Overview

The contract calls for the procurement of three semi-automatic stretch wrapping machines to be delivered and installed at Fort Buchanan, Puerto Rico, specifically in Buildings 613 and 522. Each machine must meet stringent technical specifications including a wrap height capacity of up to 80 inches, a low-profile or high-profile turntable with a minimum 60-inch diameter or 48x48 inch octagonal design, capable of handling loads up to 4,000 pounds with a chain and sprocket drive system. The machines must be equipped with AC or DC motors, a powered film carriage offering adjustable pre-stretch from 60% to at least 225%, and a programmable logic controller with a user-friendly interface featuring digital diagnostics, adjustable wrap counters, speed controls, and safety functions including a lockable electrical cabinet and power disconnect. The machines must operate on 115V, 15 Amp power, weigh no more than 1,200 pounds, and support both high and low loading profiles. All components must be manufactured in the United States or by affiliates under the Trade Agreements Act. The contractor is required to deliver all three machines along with full accessories, comprehensive user manuals, and maintenance documentation, with all work—including delivery, installation, and training—completed no later than 90 calendar days after contract award. Acceptance hinges on full operational capability with all features validated by the Government, culminating in final sign-off by the Contracting Officer’s Representative. A minimum one-year warranty covers all materials and workmanship from the date of Government acceptance, obligating the contractor to repair or replace any defective components at no additional cost. Compliance with federal, state, and local safety regulations, including OSHA standards, is mandatory. This procurement is a total small business set-aside under NAICS code 333993, solicited under W911S226U3388 with a response deadline of June 11, 2026, and managed by the Department of Defense through the Office of W6QM Micc-Ft Drum in Fort Drum, New York, with Ricardo Lopez-Hernandez as the primary point of contact.

General Info

Procurement of three US-made semi-automatic stretch wrappers for Fort Buchanan, including installation and warranty.

Agency

Department Of Defense → W6QM Micc-Ft Drum

NAICS

333993 - Packaging Machinery Manufacturing

Place of Performance

Ft. Buchanan, Puerto Rico, Buildings 613 and 522, NY, 00904

Set-Aside

SBA

Documents

W911S226U3388 - Semi-Automatic Stretch Wrapping Machines

rfq

High

W911S226U3388 - Semi-Automatic Stretch Wrapping Machines

rfq

High

W911S226U3388 - Semi-Automatic Stretch Wrapping Machines

rfq

High

Deleted Attachments.txt

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed

PostedJun 8

Combined Synopsis

Response DeadlineJun 11

Deadline has passed

Submission Closed

06/11/2026, 07:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → W6QM Micc-Ft Drum

Contacts1 person available

OfficeFORT DRUM, NY, 13602-5220, USA

Organization / AgencyDepartment Of Defense → W6QM Micc-Ft Drum

Office AddressFORT DRUM, NY, 13602-5220, USA

Contacts

Ricardo LOPEZ-HERNANDEZ

contact@example.gov

+1 (555) 000-0000

Full Description

Procurement of Semi-Automatic Stretch Wrapping Machines1.0 Project Title and ScopeThis Statement of Work (SOW) defines the requirements for the purchase and delivery of three (3) semi-automatic stretch wrapping machines for use at Fort Buchanan, Puerto Rico 00934, Buildings 613 and 522. The contractor shall provide all labor, materials, equipment, and transportation necessary to deliver the machines to these locations.2.0 Technical SpecificationsEach semi-automatic stretch wrapping machine shall meet or exceed the following minimum requirements:Wrap Height: Capable of wrapping loads up to 80 inches in heightTurntable: - Low profile: Minimum 60-inch diameter, 12 RPM - High profile: Minimum 48 x 48 inch octagonal, 12 RPM - Must support loads up to 4,000 pounds - Drive: Chain and sprocket drive system for maximum reliability and durability. V-belt drive systems are acceptable.Motors: - AC drive motors for turntable and carriage. DC motors are acceptable.Film Carriage: - Powered pre-stretch film carriage, adjustable from at least 60% up to a minimum 225% stretch - Operator-adjustable stretch percentage - Non-powered carriages are not acceptableControl System: - Programmable logic controller (PLC) with user-friendly interface and diagnostic displayWrap Modes: - Spiral up and down - Spiral up onlyControl Panel Features: - Digital display for operation and diagnostics - Adjustable top and bottom wrap counters (0-9) - Adjustable turntable and carriage speed - Start/stop, jog, and system reset functions - Power safety disconnect - Lockable electrical cabinetElectrical Requirements: 115V, 15 Amp (or standard facility voltage)Machine Weight: Not to exceed 1,200 poundsLoading Options: - High or low profilesCountry of Origin: Machine and all major components must be manufactured in the United States or by affiliates in countries approved under the Trade Agreements Act (TAA).3.0 DeliverablesThree (3) semi-automatic stretch wrapping machines meeting the above specificationsAll required accessories and optionsUser manuals and maintenance documentation for each machine4.0 Period of PerformanceAll work, including delivery and documentation, shall be completed within 90 calendar days of contract award, unless otherwise approved by the Contracting Officer.5.0 Acceptance CriteriaAll machines are delivered and fully operational per the specifications aboveAll features and functions (wrap modes, stretch adjustment, control panel, safety features) are demonstrated to the Government. User manuals and documentation are provided for each machineFinal inspection and sign-off by the Contracting Officers Representative (COR)6.0 WarrantyThe contractor shall provide a minimum one (1) year warranty on all materials, equipment, and workmanship, effective from the date of Government acceptance. The contractor shall repair or replace, at no additional cost, to the Government, any defects in materials or workmanship discovered during the warranty period.7.0 Safety and Environmental ComplianceContractor shall comply with all applicable federal, state, and local safety and environmental regulations, including OSHA standards